[nForce] Lets solve this 1394 problem once and for all.

Hi guys,
For the past 3months I have been trying to connect my Panasonic GS150 to my comuter in order to use Avid dvxpress pro. I have the problem of when I connect the camera to the computer, nothing happens. I also have this problem with my Ipod, however testing various different devices with the computer produces a strange outcome. Various different cameras work, xp pops up witha found new hardware device (like it should). Its very strange.
I started to think it was my system. I changed my onboard firewire to a pci card, same solution. So then, i reinstalled windows, same outcome. So i bought a new motherboard nforce2 platinum and to my total amazment, same problem. If was after i had totally failed in finding the solution that i started to look elsewhere on the net for anyone who knows the answer. It seems to be a VIA firewire chipset problem. Every post of people who had similiar problems where looking for the answer but NOONE has solved it, ive come across about 1000 posts with no reply's. Its a problem that thousands have but not many people ever use ther're firewire ports so they dont they've got the problem.
I really dont know what the problem is anymore, is it windows, is it certain 1394 devices, or is it the Via chipset. I havent a clue, so if anyone wants to attempt to solve this problem once and forall they will be the hero of about 3000 potential customers...
Anyone?
Jon.

Yes thats correct. Regardless of the hardware, and various 1394 devices are recognised. I've bought a 4pin to 4pin cable which i will test with different devices to see if they are consistent with a 6pin to 4pin cable, it may be a power issue. Not sure what chip on pci card, heres the info from website.
- Three external 6-pin FireWire ports
- Interoperable with existing, as well as older, 1394 consumer electronics and peripheral products
- Complies with OHCI requirements
- Compliant with IEEE 1394a-2000 standard
- Isochronous transfer support (guaranteed bandwidth) for DV video data transfer from Camcorder to PC
- Provides three fully compliant cable ports, each supporting 400Mbits/sec, 200Mbits/sec and 100Mbits/sec traffic
- Plug and Play & Hot-Swappable for all ports
- Power overload and protection failure on each port
- PCI bus master with PCI 2.2 Bus specification

Similar Messages

Ok, i'm ready to tackle this flicker problem once and for all...

ok, so when it comes to dealing with old analogue video, i always have a problem of glitchy flickery video.... it only happens when there is actual movement introduced while recording to tape (to quarantine the problem, i bought a brand new tape for my old as dirt 8mm cam, and set it on a tripod, recorded some stuff, then captured it.... smooth as silk. then i picked up the camera and kinda stomped around while recording, imported it, glitchy and flickery, but only on each step. i set up the cam to capture live footage and no tape at all, shook the camera while capturing for effect, and smooth as silk. now, i have tried these tests with 8mm cam circa 1998, VHS-C cam circa 2001, regular VHS over shoulder super old cam circa i have no idea, and all the test results turn out the same in all 3 different cameras. i even tried interfacing the cams through a vcr, and still the same problem. i even bought an external stabilizer (the ones that sell for like 15 bucks a pop on ebay), and no help.
(pssst, heres a clip of what i'm talking about.... if you notice it does it at the beginning, but not at the end... there was only movement (foot tapping or something) at the beginning, but then no more movement from the camera holder at the end)
so i'll explain my set-up. i have my analogue sources going through a hauppauge TV tuner via an rca-to-s-video converter do-dad from the rca out on the cam, and using Roxio Capture to capture the footage. the computer is quad-core 3ghz, 8gb ram, win7 x64, 3 internal 1tb HDD all at 7200 rpm set to harm's suggestion for a 3 HDD set-up, Adobe Production Premium CS5. i only do dv-avi with THIS particular workflow, so with THIS workflow we're just talking SD footage... the computer i have is more than a work horse for just SD.
what i want to know is.... if i were to go and spring for a Grass Valley Canopus ADVC, can anyone on here testify if using FireWire, and going through PrPro for capture instead of that roxio garbage, if it would come out being how i see the footage on tv? cause on the tv off the camera it is smooth as silk. but after it is digitized, it looks all glitchy depending on the circumstance. i thougt maybe it was the tape.... but ALL tapes? with 3 different cameras? were talking probably about 50 tapes i have dealt with.... all with this problem... the ONLY constant in all this has been the hauppauge TV Tuner card, and the Roxio BS software....
any wise counsel? cause i'm fed up with this problem!

What I'd like to know though is, has anyone here experience video like the clip above, before using a FireWire device, then used a FireWire device and noticed it cleared it up? I'm jut curious if the capture is the problem... Or if it's something else.
(eta: cleaned up punctuation)

I will give $100 to the person who can solve this problem once and for all.

I'm not even kidding, dude. We can do PayPay, I'll mail you a check, whatever you want. That is how frustrating this is, that is how badly I want it fixed, and that is how much overtime I've worked lately thanks to being shorthanded at my place of biz-nass. I'm an hombre of my word, so if you actually come up with a solution that works, the cheddar will be yours. Okay let's hit it.
It's the skipping thing. First 10-12 seconds of a song - every song - will play fine, then iTunes skips, stutters, and basically does the god **** hokey pokey and shakes it all about. It happens most notably with songs that I double-click to play, but I'm pretty much noticing it on any song now after a transition is made. I've been using iTunes for ages and this didn't happen until the upgrade to 7.3. I have poured over these forums for nearly a week, tried every solution offered (even offered one of my own that actually worked for maybe four days before the whole thing started up again) and NOTHING. To save us all some time, here's what I've tried:
- Downgrading. I'll admit I didn't do this correctly at first. I didn't remove everything according to the support guidelines, but I went down to version 6.05 and that did nothing to quell the skipping. I upgraded back up to 7.3 because hey, why not, and attempted the remaining trial fixes. I have since removed both iTunes and Quicktime, step my step according the the guidelines, and not only have I downgraded to my current running version of 7.2, I put both of the programs on my F drive (as opposed to the default C drive), my gigantic bonus internal drive where I typically keep nothing but my giganto music library. I thought putting the app on the same drive as the music might fix things. I thought wrong. Dead wrong. Dead diddly dum iddly wrong.
- Quicktime settings. My settings for Quicktime have always been in safe mode with the output size at 16 bits. So when I saw this "fix" I just rolled my eyes. I used to have that dealio back in the dizzle when iTunes would just get all static-y and skip when I'd open other programs or even just minimize it, so that fix worked for that, but it's nothing compared to this. In simpler terms, that fix is like Superman, and this skipping? The kryptonite. Actually that's probably not a great metaphor, but we've got a ways to go and this is going to get mucho boring if I don't throw some chuckles out there. Ready for fix three? Giddy up!
- Turn off cross-fade? It's never been on. I never really got the appeal of that, and also I think it resulted in some minor skipping back in the d. I also attempted similar fixes like turning off the equalizer, messing with the volume, closing last.fm, REMOVING an old album art retrieval program from back before iTunes got its **** together with album art, ANYTHING that might interfere with playback was turned off, removed, b-slapped, and sent crying home to its moms. Nada.
- Recreating my library. This was the fix I offered someone else, because it actually did the trick for a few days. After an entire night spent reimporting 73 gigs worth of music, it played fine, but I did lose a ton of album art, playcounts, etc, so you can imagine how ****** I was when this wound up not being a permanent fix. I was beyond ******. I was livid. But I was taught in the dojos of my youth to channel my anger into productivity, and instead of sculpting a lovely bonsai tree, I set out to fix this pup once and for all.
- That darn anti-virus! This was the final fix I tried, even though I wasn't using any of the culprit programs listed in the forums as causes of the skipping, and even those offering this as a solution confessed it was pretty hit or miss. But having tried everything else, having resorted to playing my music on MediaMonkey of all things, I figured I'd give it a shot. I used (reason for the past-tense forthcoming) AVG Anti-Virus, Lavasoft AdAware and something called Spyware Doctor that I think just came bundled with XP. I removed all of them. I had just done a virus scan recently to see if that's what was causing this, so I figured I'd be okay until I could redownload them after this fix wound up not working. And it didn't work, so there's that.
There may be a couple of fixes I've tried that I'm forgetting now, since I'm delirious after spending practically every night for the past week trying to fix this problem, while my girlf, Heather, sits and laughs at me while watching Clark and Michael on her MacBook. In fact, she's laughing at the $100 offer as I type this, but I assure you, if you offer a solution that works, the money is as good as yours. If you come up with a workable solution, I'll have to test and make sure it isn't temporary like the recreating my library thing, but I won't leave you hanging once I'm satisfied that it's fixed for good. I know it's unorthodox, perhaps illegal in some states, but I'm desperate here, peeps. The ball is in your court, and I beg you not to give up the rock.
Gateway E-2000 Windows XP

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

Firefox does not print. I AM DONE USING FIREFOX UNTIL THEY FIX PRINTING PROBLEMS ONCE AND FOR ALL!

Firefox does not print. Mozilla doesn't seem to care to fix this problem, ignoring the numerous customer requests and pleadings for help. At this point, I AM DONE USING FIREFOX UNTIL THEY FIX PRINTING ONCE AND FOR ALL!!!!!!!!!
== This happened ==
Every time Firefox opened

I honestly think the OP is making the correct decision to quit using Firefox due to all the print-related problems and Bugs that are in Firefox, '''that Mozilla doesn't want to fix'''. And there are more Bugs that affect only the Mac-platform (like the one where the user has to open a page in a new window for the 2nd web page printed from that window), than there are on Windows and Linux.
Users having to reset hidden preferences repeatedly isn't a cure.
The same 3 print-related Bugs in 2002 that caused me to take 6 months to switch over to ''Phoenix'' from IE 5.5, '''are still present in Firefox!''' I print nothing from Firefox these days without viewing Print Preview first, then about 10% of the time I do a "View in Opera" and do a Print Preview there - which shows a good print out 95% of the time (which IMO shows the page isn't at fault), and print it from Opera.
1660 Bugs listed for "'''print'''"
https://bugzilla.mozilla.org/buglist.cgi?quicksearch=print

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

Solve the MSN/Jabbber problems once and for all!!

Hey there.
I use iChat to talk to my msn friends through jabber. I have three gripes with this, two I think can be Solved. The first being user name, everytime I want to change my user name (Which is not often) I have to go into a third party app to do it, thats a pain in the ***. Second, Buddy icons. Now all I want is my company logo to show up next to my name, I don't want to change it, unless I change my logo, but I have to be logged in on msn to show this, not through jabber.
So for you developers out there.
It's obvious that when you use msn it connects to a network and grabs your username and icon. So is it possible to make a widget that is connected to this network and that you can easily type in your username and also drag and drop the logo you want to use onto it. Then it stays connected with your info so your friends can see your buddy icon while you sit there happily using iChat (appart from the no transfers)..
Hope someone can solve this problem, cause if not i'm going to be spending a lot of time trying to do it myself!
Thanks

ok thanks for the tip.
Does anyone know a good easy to install server for osx then that I can connect mainly to MSN with.
Hopefully with features like Buddy Icons and file transfers.
So that I can use iChat with my msn buddy's just like my aim ones.
Thanks

Someone please settle this problem once and for all! (Duplicate Tracks)

I had an iPod about two years ago and ended up getting a different mp3 player. I now have a new 5G iPod and am having the same issue I had 2 years ago for the short time I had my old iPod. Duplicate tracks showing up in my iPod's library. I searched through these forums and found a lot of people having these problems, but none of the suggestions I read in the other threads seemed to do anything.
This seems to be an underlying problem for a lot of people and I don't understand why Apple would make their players this ********. I've had several other mp3 players in the last 2 years and you put in an artists' name and all the songs appear together under one name and are simply organized by Album, genre, year, etc... but, I loaded all my songs onto the iPod and even though tracks all contain the same artist name I get multiple listings for the same artist.
For instance, if I have several albums all of their filenames contain the artists' name, followed by a dash and then the name of the song. The artist name in the iTunes tag all match exactly as well. So why in the **** do names show up multiple times? I had this problem two years ago and it was never resolved, and I checked all over the boards and just couldn't come to a solution. I'll tell you one thing though, I can't believe it's this hard to get all of one artist under one listing on the player. Kinda dumb.
Please forgive me if this topic has been discussed to death. I just couldn't get anything useful out of any previous topics I looked at.

Alright I just checked my tracks and settings and what not and added some more music now I get a bunch of extra multiple listings. This is so ********. lol! Here is a screenshot of my iPod that I just took. Now this is just dumb because there aren't many ways that you can mess up the spelling in the name 2Pac. It's a 2, a capital P, a lowercase a, and c.
http://home.comcast.net/~johnnybukkake/iPod_Screenshot.jpg
The first listing gives me almost all his albums just fine. Then for the second listing I get another one of his full albums. And for the last three listings I get a single song in each of them. I mean really, Apple... How does a flaw this stupid rear it's ugly head into so many people's players?!

Let's put this to rest once and for all... IT or I.T?

wowitsdave wrote:Mark D. wrote:
slow day ?Lol - Guilty.
But seriously, I run a blog about IT career development and I'm trying to standardize the way I use it- with or without periods. Haha.If I was a betting man.. I would put my life savings on IT ending up as a landslide winner.

I couldn't find any answer on the Google, so...
Which way is Information Technology abbreviated?
Is it IT or I.T.?
Answer on Survey Monkey, then put your justification here in this thread.
This topic first appeared in the Spiceworks Community

Problem: I have to run repair permissions to access the internet using safari, firefox or chrome on my mac pro. What can I do to fix the problem once and for all?

This is what I get when I run repair permissions in disk utility. Thanks for any assistance you can give.
Repairing permissions for “Macintosh HD”
Repairing permissions for “Macintosh HD”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pl.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pl.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pl.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pl.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt_PT.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt_PT.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt_PT.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt_PT.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/pt.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/sv.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/sv.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/sv.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/sv.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ru.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ru.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ru.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ru.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/no.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/no.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/no.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/no.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/fi.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/fi.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/fi.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/fi.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
ACL found but not expected on “private/var/db/launchd.db/com.apple.launchd”
ACL found but not expected on “private/var/db/launchd.db/com.apple.launchd”
Repaired “private/var/db/launchd.db/com.apple.launchd”
Repaired “private/var/db/launchd.db/com.apple.launchd”
Permissions repair complete
Permissions repair complete

Would you care to tell us which version of Mac Pro, and which version of OS X, you are running? (It's not always safe to assume that a User is running Lion just because he posted in the Lion Forum.)

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Please settle this discrepancy once and for all re: maximum ram.

My old iMac SE DV graphite was purchased and delivered in January, 2000. The original order catalog (which I kept) claimed that it was "expandable to 512mb", as were all the 400mhz G3 slot-loading DV models in various 'flavors' including my Graphite Special Edition model. Also, both / all versions had the ATIRage 128 accelerator with 8mb SDRAM.
The only differences I can discern are that my Graphite has more ram (128mb) and had a slightly bigger hard drive (13GB on the graphite vs 10GB for the 'fruit').
Note: I have since replaced the hard drive with a 20GB since the original died within the first 2 years.
On this disussion site and other places (including MacWorld articles) I've seen conflicting statements as regards the MAXIMUM RAM my graphite should/could have. Some say 1GB (2x512) and some say 512 (2x256).
Can anyone once and for all, settle this question for me so that I can make an intelligent purchase?
(and thank you for the info re: PC100 as the way to go, not PC133)
Thanks & Peace to all.

At the time of its release Apple certified it for 512 MBs probably because larger DIMMs weren't available. In fact you can expand it to a max of 1 GB (two 512 MB DIMMs.) You will need 2 - PC100 3.3V 168-pin SDRAMs.
I can recommend DataMem as a reliable source for fairly priced RAM for Macs. The item you want is here.

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

Current CC subscription turns into trial mode every other month... How to fix this once and for all?

Current my current always promptly paid CC subscription regularly turns into Trial mode. This means I can use Apps in trial mode (how nice...), ask me to get a paid subscription, and at the same time happily charges my credit card. This happens every other months. Then I have to discuss this with their agents, which usually takes days to weeks, because they don't know what's going on. How on earth can this be fixed one and for all?!
Thanks,
Hinnerk

Hinnerk do you have a case number from your previous contact with our support team that I can reference?
If you have a valid membership then please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve connection errors.

Account needs sorting once and for all PLEASE!

Hi, I have sent an email to moderators here as I did last time. Last time I was given a rebate, for incorrect bill. My bill AGAIN has not been worked out correctly. To be frank I am fed up of rubbish BT not sorting out my problems since September last year.
One thing cannot be done at a time, my whole account especially online is all in a mess, nothing is as it should be, and someone needs to go on a computer to go through it with a toothcomb to fix it. Rebate on a bill is not going to change the fact my bills are being generated incorrectly. STILL!
I wish to SPEAK by phone to anyone who can fix this as I am not going to continue this way with BT, and if they even try to charge me for no honouring my side of the contract, then I shall end up taking this up with a solicitor. I have even been charged £10 on my new bill for not honouring my direct debit, considering one of the foreign advisors had promised my bill would not go out my bank, but it did try to, twice and I was charged £50 from my bank, and you even try to charge me £10 for YOUR mistakes.
I am fed up. I have 8 months left on this so called contract. I do not intend to go on like this for that amount of time. I want my account sorted out once and for all PLEASE!
I apologise to you forum admin, and I know this is NOT your error, I am merely really frustrated at the lack of communication to fix my problems and have spoken via phone 3 times since my last forum entry to try fix my online account, and have been promised again it would be fixed and it is not.
Thank you

Hi thebillies,
We were looking into this for you and had reported a fault to try and get to the bottom of the discrepancies.
I'll make sure that you get an update on this later today.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Once and for All ---- Please

Hello all,
I have used CF for several years now and bought Flex as soon
as it was released. In my process of understanding how Flex handled
Remote objects for CF I decided to use the CF Builder wizard for
Flex that creates all kinds of nice CFC's and stuff for me to
connect to a database and CRUD the data within. Ok all fine and
dandy on the local machine, works great, I am impressed! That is
until I try to upload the app to my Shared Server (HMS) and I get
all kinds of cryptic error messages like:
(mx:rpc:Fault)#0 error id = 0
faultCode ='Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error
NetConnection.Call.Failed :HTTP:Status 500"
faultString = "Send Failed"
message = "faultCode.Client.Error.MessageSend
faultString:'Send Failed'
faultDetail:'Channel.Connect.Failed error
NetConnection.CallFailed: HTTP: Status 500" name = "Error"
rootCause = (Object)#1
code = NetConnection.Call.Failed"
description = "HTTP: Status 500"
details = "
http://www.MYDOMIAN.com/flex2gateway/"
level = "error"
So I have read the DOCs and read all the blogs I can find on
the subject but no one can clearly answer as to why I can not make
this work on a Shared Server if I can make it work on my local box,
Heck I can even tap into the MySQL database on the Shared Server
via the Flex builder. I use HostMySite.com with the CF package if
that helps.
If it is just a matter of something on my hosts end I need
them to configure for me that would be nice to know, or if I simply
can't use Flex and CF together on a Shared Server all together.
That would be nice to know. But for all the hype Flex is getting
and how easy it supposed to be to create an app with CF, I am
wondering why someone can not answer this question once and for
all. I know others have posted to this and many other forums asking
the same things I am. Is it too much to ask one of the Flex Gurru's
of Adobe, or anywhere else for that matter to help us out?
Not everyones wants to run their own server and I would think
that Adobe would have kept that in mind when creating Flex, and how
it would run on shared servers.
So please if anyone can help understand this please let me
know.
Thanks

Halodev / Peter,
I was JUST about to ask the same question. The problem I was
having was migrating a Flex app created on my local machine,
connecting with my local CF app, to a test (model of production)
server.
I knew the following:
1) The flex app worked as expected
2) The data was not an issue, as I mapped a datasource to my
production DB
My main concern was getting the Flex app to work on the test
server, but my biggest issue was the fact that the setup of my
local and test servers are different. Example, I have a single
instance locally, running off localhost. On my test server, I have
multiple JRUN instances on the D-drive (as opposed to the c-drive,
locally).
From this post, I figured out that I needed to change the
project properties to account for the different location of the
flex-config file. I right clicked on the project and selected
properties, and altered the values in the "Flex Compiler" and "Flex
Server" sections to reflect the TEST server locations of the
flex-config file.
Now, to make life hard on myself, the "d" drive on my laptop
is the CD ROM, and when I tried to enter the path in FB, I got an
error saying that the path was invalid. I looked into partitioning
my drive, but I was warned off it by our tech guy here (besides, it
seemed too much like real work!). SO, I burned a CD with the proper
path, just as a temporary solution.
I re-built the app, and deployed ALL of the files in the
local projects "bin" directory. It worked, eventually, but there
are some questions I have, maybe, Peter, if you read this you could
help.
1) I had trouble with SSL - my test servers use them (as do
the production servers). The SWF started to load but I got a 403
error (that is SSL related, I believe). I'm not sure if that was
when it was loading, or trying to access the CFC. Any thoughts on
this? Are there known SSL issues?
2) The whole "D" drive thing was a pain. As I mentioned, I
have multpile JRUN instances on my Test (and Dev) server - one for
each site. If I created a single generic site on the c-drive, would
all sites that access flex be able to use that flex-config file, or
do they need to access the local file? I'm not really getting how
the flex services-config.xml file relates. Maybe I'll re-read your
posts in this thread.
3) Do I need to copy all the files from the bin directory, or
is that over-kill? What is the bare-minimum code I need to get the
Flex SWF to run? Could I just copy a sub-set of the HTML to a
content management system?
Any help with the above is appreciated.
I'm not sure if I answered the original question, or
contributed positively to this post - I hope I did, and that
someone will find this information useful in the future.
Cheers guys,
David

[nForce] Lets solve this 1394 problem once and for all.

Similar Messages

Maybe you are looking for