NForce networking and Thomson SpeedTouch 510

I have an computer with ASUS motherboard. It have an nForce chipset.
The network dies somtmes. How to fix it?
EDIT:
root@Litronit:/home/elis# /etc/rc.d/network restart
:: Stopping Network [FAIL]
:: Starting Network [BUSY]
Error, eth0: ioctl SIOCGIFHWADDR: No such device
[FAIL]
root@Litronit:/home/elis#
I got this message when I try to restart network after it died.
EDIT2:
It Just lost connection to internet. The network dont die... I can acces the modem/router page when it's dead.
It's just wierd.
EDIT3:
Hmm, checked with IPs and stuff when it dies.
When I can access the internet my IP in ifconfig is my internet IP. And I can't access the modems config page.
When It's dead I got an local IP and cant access the internet but I can access the router page.
But I don't know why it changes my IP.
Last edited by Mandalf (2007-11-11 08:32:50)

C:\Documents and Settings\Mutu>ipconfig/all
Windows IP Configuration
       Host Name . . . . . . . . . . . . : toshiba
       Primary Dns Suffix . . . . . . . :
       Node Type . . . . . . . . . . . . : Unknown
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Wireless Network Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2100 LAN 3B Mi
ni PCI Adapter
       Physical Address. . . . . . . . . : 00-0C-F1-11-5D-FF
Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix . :
       Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connecti
on
       Physical Address. . . . . . . . . : 00-08-0D-44-F0-D2
       Dhcp Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IP Address. . . . . . . . . . . . : 192.168.1.100
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
       DHCP Server . . . . . . . . . . . : 192.168.1.1
       DNS Servers . . . . . . . . . . . : 192.168.1.1
       Lease Obtained. . . . . . . . . . : Wednesday, June 06, 2007 4:45:04 PM
       Lease Expires . . . . . . . . . . : Friday, June 08, 2007 4:45:04 PM
After I repair the network from windows the DNS server changes to
       DNS Servers . . . . . . . . . . . : 212.118.0.66
                                                     212.35.64.254
Which is the DNS of the ISP

Similar Messages

No connection between E71 and Thomson Speedtouch 7...

Hi all,
My E71 detects the WLAN at home; it reports that signal strength and protocol are OK (Both WEP and WPA), but the Speedtouch does not detect my E71 (on the home page WLAN status)
Does anyone have a clue how to correct this problem on the Speedtouch, or on the E71?

right forget telnet.
thomson speetouch/ gateway routers are problematic with some devices.
(in short the software on the provider supplied ones is **bleep**, limited and very unstable in places)
The handset does not display a name, just the mac address so in the router setup will show the phone as Unknown xx-xx-xx-xx-xx and as so cannot always sign an ip (most operator dependant providers try and protect your backside nowdays from wifi moochers.
log into to your router
the address will possibly be
http://speedtouch.lan or http://192.168.1.254
if it asks you to login the details are
the Username is Administrator (note the CAPITAL A)
password is blank
once your in you'll see the UI
scroll down to HOME NETWORKING (not the menu on the side)
and look at the devices next to wireless. click on the device it shows (for instance "Unknown-0a-2f-d8-cc-cd-3d" )
(that is a fake mac address/device)
it'll take you to the informaton about said device look in the top right hand side for "Configure"
once page loads change the device name to suit your needs - pauls_e71
scroll down to type, make sure it's set to mobile phone
(do not set to PDA there is a bug on most firmware's on thomson routers will spazz out with this setting, it does on both my unlocked st585v6 and my provider supplied tg585v7)
tick "always use the same address" then click apply, it should fix the problem
i hope this helps, as it did with my 2 e71-1's my nokia 8086's UMA and my sons n95-1
Anna/Belle handsets : E6-00
s60 handsets : E71 grey steel, 6700slide Purple
s40 Handsets : Nokia C3-01, 6086, N6300.
JesusPad2 16gb, booklet3g (32gb ssd upgrade) eeepc701SD (64gb ssd) bauer mini laptop (32gb ssd)
Kudos is Nice - please. Pass it on, you'll make a geek happy
@hooker1uk (as a blogger my words do not represent the brands i work with unless stated otherwise.)

Speedtouch 510/ SIP: Don't scream at me!

Please can someone help me. I am not very Mac savvy, but generally cope.
I run a PowerBook G4, with Airport Express and a Speedtouch 510 router to link to Virgin.net (my ISP)
I recently got an iSight camera. I can text chat using AIM but cannot get get Video/Audio.
I have been through the forums and seen Ralph's pages. I have tried turing UnPNP on and off - that didn't work - and have used the NAPT to open ports starting 5xxx - that hasn't worked either.
My Mac firewall is off.
Two questions are these:
1. Do I need to put in the individual numbers for the ports starting 1xxxx
2. I cannot see how to get into unbind the SIP protocol. I can understand Ralph's instructions there, but please can someone tell me how to get into the SIP protocol.
Very happy to provide any extra info any of you may need to help with this - but like many people on this board at present I am very frustrated with the router box!
Thanks
PowerBook G4 Mac OS X (10.4.6)

Hi Tom
See Ralph's reply here http://discussions.apple.com/thread.jspa?messageID=1765896&#1765896 to unbind the SIP.
And then try to contact me defcom1 .mac account.
Tony

NVIDIA nForce Networking Controller problem

Hi, I am a new user of Solaris and Linux and I am having a problem with my internet connection under solaris.... i was reading other messages in the forum and apparently solaris doesn't detect my network adapter because when i run ifconfig -a it only shows lo0....
I went to nvidia.com but the drivers on their website are only for the graphics card... where can i get the requiered drivers (and how do i install them under solaris) for my internet connection to work???
i have a NVIDIA nForce Networking Controller and connect to the internet using road runner trough a router...
thanks...
Javisam376

Hi, I am a new user of Solaris and Linux and and I am having a problem with my internet connection under solaris...<snip>
Javisam376
Hi,
Same problem here Javisam376, but I am on an AMD x64 platform, and wondered if that might be the reason why the Solaris Express Developer Edition was unable to see the NVIDIA nForce Networking Controller, so I wonder which platform you're on (32 or 64-bits?) A general Google search for "Solaris NVIDIA nForce Networking problem" gave a fair number of hits, so the problem, seems well known, but no solutions were suggested by anybody, as far as I could see(!?)
But it seems the Linux community has the same problem, since I found this posting on LinuxQuestions.org (http://www.linuxquestions.org/questions/showthread.php?t=471094):
"I just finished installing Red Hat 9 on my machine, which is running off of an AMD/NVIDIA nForce2 chipset mobo that has integrated ethernet. I was trying to set up my network connection, but was unable to locate the nvida ethernet controller in the Network app/Network Configuration Wizard. So I went on to nvidia's site and downloaded the x86 linux driver (using my other machine) and used a cd to pop it into the other comp... Saved it to the desktop,
then terminaled: sh NFORCE-Linux-x86-1.0-0310-pkg1.run.
It took me through a setup screen where I 'installed a audio and ethernet driver'. I checked the Network wiz again, still no entry for it. So I randomly clicked the hardware browser, and IT lists the 'nForce2 Ethernet Controller' under network devices, but I can't configure it from this screen. Anyway, I would seriously appreciate any help with this. I need to get internet access on this machine quick, so this is drivin' me crazy."
Message was edited by:
troruud

Nforce network controller

Hi i wonder if anyone can help, this is my first pc build so be gentle with me
Ive built a system around the msi k8n neo platinum and everything seems to fine apart from when i enter device manager there is a ! next to the "nvidia nforce network controller" icon and when i check its properties it says it cannot start.
The the realtek one is fine and thats what im connecting to the internet on now. I've used the live update and let it update all the nforce drivers but it still wont start.
Any ideas?
Thanks in advance
Michael.

I disabled mine as I already have a hardware firewall. Looks like it's good stuff though, I did have it on for a short while but it was conflicting

Nforce networking optimized for cpu?

hi guys, new to nvidia networking settings.. (i used to be a realtek guy)
what means nforce networking optimized for cpu in the settings?
TIA

Ive tried both and I dont like active armour cause its not dummy proof enough for me... ...zone alarm is just easier to set up and use. I assume if you were to understand all of the features and functionality of active armour, then it may be better than zone alarm. For now, zone alarm does the trick for me.
For anyone using the microsoft firewall, get rid of it and replace it! It sucks and does nothing to stop internet outgoing traffic and download zone alarm now imo.

Can no longer connect to my network and 'forget network' option has disappeared??

Can no longer connect to my network and "forget network" option has disappeared??? (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

JEM24 , your suggestion is included in:
- iOS: Troubleshooting Wi-Fi networks and connections
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
JEM24 wrote:
Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

I have had my ipod 4th generation for a year now and had not had any problems until now. My ipod no longer connects to my WiFi. i have reset my network settings, forgot my network and followed all of Apple's advice. Any ideas?

The WiFi isn't working on my 4th generation anymore. I have several devices connected to the WiFi which two of them are iPhone 5 that haven't had ant problems with WiFi. I have had my iPod for a year. I have tried everything and it still doesn't work. Any ideas? Thanks.

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Can not see my Airport in the list of Wifi networks and is blinking organge all the time

Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
You might be able to setup with the v5 utility in windows but there is no guarantee.
You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I rented a movie via Itunes on my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. Will I still be charged?

I rented a movie via Itunes on my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. I have rebooted Itunes and resumed the download of the movie only to receive the same error code. Has the movie file been corrupted? Can I recover the rental even though the time has elapsed? Will I be charged?

Did you figure this out? I haven't rented a movie in this new iTunes yet and saw one tonight I wanted to rent. Same fricken thing is happening to me. I hate this new iTunes, and I really hate that there are problems like this....why the heck do they have to fix something that isn't broken and break it? This just really stinks.

Wireless network and bluetooth not working on touchsmart 600

This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please advise

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My iPhone won't allow me to scan for any network and won't even pick up on any wifi networks near by. How do I fix this?

My iPhone 4s won't allow me to scan for any networks and won't even pull up wifi networks near by. How do I fix this?

Settings > General > Network > Reset Network Settings.
If that does not resolve the issue...
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

My phone wont let me do anything. On the locked screen it says hello in a bunch of different languages and when i unlock it it say to choose a Wi-Fi network and will only let me go to emergency calls. How do i fix this?

How do i fix my phone?
Itis trying to make me hook up to a Wi-Fi network and wont take me anywhere other than that and emergency call. I tried to restore it but I can't because I have find my phone on.

I found this article some time ago when I was trying to help someone else in this same situation. This is a copy and paste from the website. The website is provided below for you to read before you try this.
Plug your phone into iTunes
Click setup as a new device
Immediately unplug your phone from the computer
Give it about 30 seconds and iTunes will give a message (I don’t remember the specific, but regarding you unplugging the device and it not completing)
Plug your phone back in
Viola! no restore occurred and you can access everything again
This computer has previously synced with an iPhone or another iOS device.

NForce networking and Thomson SpeedTouch 510

Similar Messages

Maybe you are looking for