[nForce] no audio on disk or image when burning a dvd movie

i've recently bought a K7N2 Delta I lsr and since i've had this i have never been able to burn a dvd movie no matter what i try. I've started from scratch trying with just the AC-97 audio drivers installed and downloaded the latest nforce audio drivers from nvida website, nomatter what i do i cant get a movie on disk correctly. When i build an image on my harddrive, i play it and theres no audio and when i build a dvd disk either the audio wont play or the entire disk wont play. my dvd player either says disk cannot be played or the disk is dirty. But when i import the image or disk into dvd shrink the film plays fine with audio. I'm at a total loss. i dont think that my processor has anything to do with it but i have an AMD Athlon 3200+ and 512meg 3200 Geil ram. If anybody has any ideas or better still a solution i would greatly appreciate a reply.. Thankx for your reply in advance...

Hello SON!
Recently bought, you say. Does that mean you have installed all mobo drivers, repair installed Windows, etc?
Have you tried the disks in another system?
Do you use the same software for playing and recording?
I don't think this is it, I think it is a software/driver problem, but two quick ones:
Untic in Device Manager for the optical device "Recognise insertion", as that can ruin a burn.
Remove the audio cable if you got one between the optical device and the sound card.

Similar Messages

Audio soundtrack won't play when burn to DVD or save to a file! HELP!

When I edit and playback a video project, the soundtrack plays back fine. But when I burn to DVD or export to a file, the soundtrack is silent. It DOES still play audiotracks that are from the original video footage, but it won't play the soundtrack song that I added to the video. I have this problem only when I make a HD version. The sountrack source file is in standard WAV format (44.1 khz). The project settings include:
Editing mode HDV 1080i
Timebase 29.97 frames/sec
Video frame size 1440x1080
Thank you for your help!!!

Glad that it worked.
As to why the Fixed Soundtrack sometimes has issues, I haven't a clue. What version of PrE are you working on?
Several users have reported issues with both the Fixed Soundtrack, and Narration Tracks, not working properly, but those cases seem to be Project specific, in that when the same users use those Fixed Tracks, in other Projects, everything works fine. In every case, that I can recall, the "fix" has been to Move the Audio Clips to an empty "regular" Audio Track.
The issues seem to have cropped up in about PrE 7, and continued through PrE 9. Again, because the problems with those Tracks, seems to be Project related, it is tough to diagnose what the real "cause" is. To date, I do not recall anyone having the issues in PrE 10, but maybe no one has hit the right combo of criteria (we have never been able to nail down what those criteria are) in a Project, to cause the problems.
Wish that we could track the problem down to something specific, so we could just say, "Don't do that," but we do not know what "that" is. Until we do, we'll just keep recommending that users Move the Clips to another regular Audio Track.
Good luck,
Hunt

How can I improve quality of image when burning a movie to a DVD

How can I improve quality of image when burning a movie to a DVD?

What resolution are you using? If the DVD is to be playable on an ordinary DVD player, only ordinary TV resolution is supported. You need Blue ray for HD.
Geoff.

HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display. I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities. It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

Does anyone experienced bad quality when burning a DVD?

Does anyone experienced bad quality when burning a DVD?
Using OS 10.6.8 and Magiv Video in iDVD, I am having a hard time creating a decent DVD. The videos per se are fine, but the intro menu and menu text and images are extremely poor quality and hard to read. What is going on?

Hi my notes on this - might be of help
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser and as Large (NOT HD or other resolutiona as result will suffer) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

How can I increase resolution when burning a dvd with elements 11 premiere

How can I increase resolution when burning a dvd with elements 11 premiere
I am trying to generate a slide show DVD....the pictures on the TV are poor quality

Welcome to the forum.
As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
Good luck, and please let us know the pixel x pixel dimensions of your Images.
Hunt

When burning a DVD from Elements 13, it freezes at 90%

when burning a DVD in elements 13, it freezes at 90% and locks up elements until I cancel burn.

Jerry Jarrett
If you wish to pursue your question about burn to disc, then I would be glad for the opportunity to be of assistance.
The following would be my troubleshooting strategy and questions
1. What computer operating system is your Premiere Elements 13 running on?
2. Have you looked at the issue with and without the Intel HD Graphics 2000 and Higher preferences disabled
(See Edit Menu/Preferences/General)?
3. Where are you in Publish+Share/Disc/, DVD, AVCHD, or Blu-ray? And, what does the burn dialog's Quality Area
show for Space Required and Bitrate? What brand/type/capacity disc are you using?
4. Is the issue specific to one Timeline in one project? Or, is the problem there with another Timeline content and another
project.
I would prefer to see you sort out the burn to disc issue if possible because of the download problems associated with the 3rd party software
that is typically needed to obtain the disc product from the Premiere Elements VIDEO_TS, BDMV, or ISO Image. Excellent 3rd party software if you
can get it installed without a lot of companion garbage. Although how to have been described for the safest possible download and install, there
are no guarantees that you will not be hit with a lot of computer cleanup just to get one excellent program.
ATR

When burning a completed movie in idvd the whole sound track of the last chapter disappears

When burning a completed movie in idvd the whole sound track of the last chapter disappears. When I play the whole movie in iDVD before burning to disc both the sound tracks are their, but when burnt to a DVD the two sound tracks disappear half way through the last chapter, can any one help please.

Mike,
There is an iMovie forum, please click the link and repost your question. I suspect the iMovie guru's may be able to help you out.

Will stacks show in pic's when burning a dvd?

Hi all, just wanted to know if the stacks in my pic's will show when burning a dvd. When I fix red-eye or auto smart fix it shows the stacks on my pic's. I don't want the stacks to show when burning the pic's on a dvd.
Thanks, alot

> When I fix red-eye or auto smart fix it shows the stacks on my pic's
My guess is that what you are referring to as "stacks" is the icon superimposed on the thumbnail to show that this photo is part of a Version Set. This icon is present over the thumbnail, but it is not in the photo itself. No, it will not show on the photo file that is burned to a DVD.
You did an auto red-eye and an auto smart-fix. These create Version Sets where they save the file of your fixed photo separate from the original photo file so that your original is preserved.
I think my description answers Colin's question of "what do you mean by stacks showing?" If not, tell us what you did mean.
Then please do answer the question of specifically how you plan to Burn the DVD.
Barb O

FCPX: changing the resolution preferences when burning a dvd?

FCPX: How do you change the resolution preferences from 720 to 1080 when burning a dvd?

DVD standard is 720X480, which is why you don't have a resolution choice.
Russ

Trouble encoding audio when burning to dvd

I have finished editing a nearly 2-hour long wedding video and all is going well, everything encodes fine until....it comes to my audio. I have now tried to burn this movie 7 times to dvd and EVERY time it freezes when it reaches the stage of encoding the audio. Any tips?
Message was edited by: Bri

Hello, trouble,
Welcome to the discussions. Sorry you are having so much trouble burning your DVD. What exactly do you see when you think it is freezing? Does it just look as if nothing is happening? Do you actually get a message that says there is a problem with the burn?
If you are using any version of iDVD prior to iDVD 8, I suspect that your audio is encoding fine and not really 'freezing'. It will LOOK as if everything has stopped, because the those versions did not include a 'time remaining' notice. You can see a small thumbnail of the menus encoding, and you can see the video of your movie as the video encodes, but when audio encoding is occurring, there is only a black square. Depending on your computer system, the process can take some time. I recommend that you just leave it alone, maybe overnight, and see if it is fine in the morning. On my older iMac, a nearly 2hr movie might take over 12 hours to finish encoding/burning.
I do recommend that do a 'save as disk image' for every iDVD project.
If you are not familiar with this process, it is the creation of a file that is an exact replica of your iDVD project. The encoding looks the same as it is occurring, but the end result is a disk image file, not a burned DVD disk. There are several reasons to do this: It can save you from wasting disks if there is something wrong that prevents a successful burn; you can view your disk image on your computer using the application DVD Player to view your project and see if it is ok; you can use the disk image for burning disks through Disk Utility (or Toast); and you can control the burn speed--should be 4x or less.
And, you now have a self-contained image file that you can save and from which you can burn disks in the future. Because it is self-contained, you can safely delete your iMovie and iDVD projects, thus saving drive space. Even though you can burn another DVD using one that you already have burned, the disk image file is a better backup. DVD disks can crack, break, melt, etc. and if you lose your copy, you will not be able to burn another.

Missing Audio When Burning A DVD For Grandma

I've created a short 8 minute video with an audio track on top of it. The 8 minutes consists of a 2 minute video opening created in quicktime. 4 minute slide show imported from iPhoto and 2 minutes of closing credits created in iMovie. The 8 minute soundtrack was created in garage band using several iTunes tracks. (I'M TRYING TO BE ALL APPLE!!)
Everything looks great when I preview in iDVD. However, when I burn the dvd the audio drops out about 3 minutes into the video and then starts up again at the very end (out of synch of course).
I've tried everything I can think of - created an image in iDVD and burned using disc utilities , swapped out the audio tracks, changed the photos...still nothing works.
Any suggestions?? We have a first birthday coming up and we really want to get this to Grandma. Thanks.

Hi
Can be audio from iTunes or strange file formats eg .mp3 etc.
iTunes - Copy out as an Audio-CD .aiff
Other audio formats - convert to .aiff 48kHz 16-bit
Use this and it most probably works.
Yours Bengt W

Error message "disk is locked" when inserting blank DVD

My G4 is supposed to be able to burn a DVD, but when I insert the sample DVD that came with the computer when it was new, I keep getting the "disk is locked" message. It also happens with other DVD's that I bought specifically to use with the G4. I would appreciate your suggestions.
G4 Mac OS 9.2.x

VenturaGutek
Any optical drive software that is worth its salt should enable burning of data discs (4.7GB or 8.5GB in the case of DVDs) as well as of specialized file formats. That said, however, one of the commonest reasons for failure to burn, even failure to recognize an optical drive, is extension conflict. This was especially true of Roxio's Toast v5.x, when using which it was necessary to disable all Apple extensions, USB and FireWire, so that control of the drive could be taken by Toast extensions. I had to do this only recently to get a friend's LaCie DVD-R burner to be recognized as a DVD (rather than CD) burner by a B&W under OS 9.2.2, let alone to burn DVDs. That possibility was the reason for asking about your software. However, if you are using only Apple software, there should be no issue of software conflicts of this nature.
Without wishing or intending to fob you off, I suggest that you will get much more up-to-the-moment guidance from active fellow-sufferers than is likely in this antediluvian category if you approach them in the iDVD specialist forums, which are divided into iDVD 6, 5, and 4 and under.
Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT System 6.0.8 to OS 10.4.x

Gaps in audio when burning on dvds and cd

When I burn a dvd and add audio, I have gaps in the playback on the audio only.

Hello BCRC,
What make / model computer are you using?
What operating system?
What program are you using to burn the DVD's and CDs?
By gaps are you meaning that there is a gap from one track to the next and you are looking to burn gapless discs, or are you referring to the audio actually skipping parts of the audio when burning?
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Audio dropped out when burned on DVD - PRE.

I have finished my movie on PRE 8 and burned it on a DVD in high quality. The problem is the background music works, but the audio from the videos is dropped out. When I play it on PRE 8, the audio works perfectly. The video and audio comes from a JVC Everio HDD. Everything works fine until I burn it.
I did not use Instant Movie or Audio Mixer because I did it manually.
Is there anything I need to do before I burn the DVD, or do I need special settings?
Another problem I have is that Organizer turns off and does not work.

Patrick,
You gave me an idea for two tests. They are simple and fairly quick and will not require any real editing in PrE, or another NLE.
Test 1:
From Export/Share, Export your movie. I think you are doing SD/DVD work, so choose DV-AVI. Export just the Video (checkbox for Video and Audio, and you want Video only). This will give you a silent Video-only file. Now, Export>Audio (choose PCM/WAV 48KHz 16-bit) to get an Audio-only file. Test this Audio-only file. Did you get both the AV's Audio and your Soundtrack? You should. Then, create a new Project to the right specs., and Import those two files. Note, your exact placement of the Audio-only file might not be on Audio Track 1, and just let it go to Audio Track 2. I'd not use Narration, or Soundtrack. Test. Burn to a DVD RW disc, so you do not create a coaster, and test again.
Test 2:
Do a Save_As, name and locate it. Delete your music from the Soundtrack. Export/Share the movie with both Audio & Video. Test. If things are working now, without the Soundtrack, I'd bring in your music, but try placing it on Audio Track 2. Test. Note: an alternative to this would be to do two Save_As Projects. In one, remove the AV's Audio completely, and then Share/Export just your Soundtrack as an Audio-only file. Choose the same PCM/WAV 48KHz 16-bit. Then Import that into the first Save_As, the one with no music. Again, try placing this file on Audio Track 2. Test.
I worry that maybe one, or both of the fixed Audio Tracks, Narration, and/or Soundtrack, is getting in the way. The above tests will be quick and should get you the results that you need, with what you have. The tests will also tell us if something is wrong with the Soundtrack Track, as it seems to be killing the AV's Audio on Audio Track 1.
Good luck, and please report,
Hunt

[nForce] no audio on disk or image when burning a dvd movie

Similar Messages

Maybe you are looking for