NFORCE2 on K7N2 Delta Series..HOW TO MAKE IT WORK!!!

If you have a K7N2 Delta Series, and are experimenting problems with 200FSB, and you are sure its not caused by PSU / RAM / Jumpers Settings / Incorrect Installation / Overheat, or anything else....
  FLASH YOUR BIOS !!!!!!!!!!
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
I used the Award BIOS here, and it JUST WORKS FINE!!! I just wanted you guys to know how i finally managed to make my Athlon Xp 3000+ (400FSB) CPU to work!!
If anyone is experiencing problems, then FLASH your BIOS!!! Give it a try!!!   (Remember: From DOS!)
Finally i just wanted to give my sincere thanks to all these great people in this board that have helped me and give me advice   You guys are the BEST!!!   Thanks for everything!!!!!!    
  I JUST LOVE IT WHEN EVERYTHING GETS TO WORK JUST FINE!!!!!  

:biggthumbsup:glade u got it working

Similar Messages

  • MOVED: need help with my k7n2 delta series motherboard please

    This topic has been moved to AMD SocketA based board.
    need help with my k7n2 delta series motherboard please

    "...the other memory ive been using is  memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.

  • IDE Harddisk and DVD ROM cannot detected by BIOS in K7N2 Delta Series

    Does anyone can help...
    I have problem with my system, From now on i cannot use my computer because it cannot started the windows. When i checked to the bios there is no detected Harddisk in IDE 0 ( i have 2 harddisk installed), only 1 detected in IDE 1 - only CDRW drive ( for CDRW drive and DVD ROM drive). I checked the power cable to the both Disk drive and Optical drive there is no problem. If i change the master and slave pin the problem stil happen.
    I don't know what to do  Please help me.
    my system :
    MSI K7N2 Delta Series
    AMD Athlon XP 1800+
    Windows XP Pro SP2

    Quote from: ici on 08-February-06, 01:06:02
    When problems occur go back to basics.  You stated D: is unreadable but C: partition is readable (if I understood right).
    As sharp said use only one stick of ram.  Remove any additional PCI cards installed other than Video.  Do not plug in anything but the hard drive set to master.
    Check to see if system will detect.
    If at this point it properly detects your drive, check for a boot to windows.  If it boots then remove the hard drive and try just the CD-ROM for detection purposes.  If this detects try them together again, if they fail to detect you most likely have a power supply issue.  And yes, PSU issues can crop up very suddenly.
    If this fails take the Hard Drive to a friend and have them test it along with the CD-RW/ROM drives.  If they work there and your issue still persists when you have eliminated all other possible points of failure you probably have a bad motherboard.
    Sorry i forgot to tell that the harddisk that the D: cannot unreadable is i check it on other system as a slave.
    Okay i will try your suggestion.
    Thanks for your comment 

  • Network controller on k7n2 delta series mainboard?

    Hey everyone,
    just a quick question...
    Does anyone know where I can get the driver for the network controller on a k7n2 delta series board?
    Thanks. Skin1301

    Quote from: Doctor Stu on 06-May-05, 03:02:08
    is the on-board LAN enabled in BIOS? (Integrated Peripherals)
    have you loaded the nforce system drivers?
    and can you explain in more detail your problem and what you have tried to do?
    i have downloaded the nvidia driver and tried to update it from the and it dont finds any software

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I have the same problem.
    Two similar discussions:
    https://discussions.apple.com/message/23081658#23081658
    https://discussions.apple.com/message/23281391#23281391
    I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
    If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
    Please let us know what feedback you got from asking Apple support.

  • How to make buttons work in Interactive Adobe Forms

    Hi Experts,
    I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP  (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
    Kind Regards,
    Sharat.

    Please refer to my earlier post ... You will get an idea
    Please refer to the below thread for detail solution
    Sample Interactive form example ?....urgent...
    Cheers
    Satya

  • Deleted itouch files using ifile from cydia. i restarted it but now it shows the apple logo and that is it... it doesnt respond. any ideas of how to make it work?

    I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it.  I deleted all files from ifile and then it froze... any ideas of how to make it work again?

    Discussions of hacked ipods is not permitted here.

  • I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

  • HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

    My mac is OS X 10.6. has not airplay. How to make it work?

    OS 10.6 is Snow Leopard, which does not support Air Play.  If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer. 
    See this document:
    http://support.apple.com/kb/HT5404

  • Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

  • How to make tablesorter work for GroupedColumns??

    Hi all,
    I imported the class of TableSorter.java to my project. It automatically picks up my normal columns, they all can be sorted.
    but the groupedColumns generated by the drag and drop table node into the design area wont pick up, even i set the property of "onAction" of the column to "Sort"(method) it wont sort the content for me.
    how to make it work?
    thanks

    hi!
    you can get lead selection in the action handler then inset your code for currentContextElement.
    wdContext.currentContextElement().getTableSorter().sort(wdEvent, wdContext.nodeXXX());
    thanks
    vishal

  • How to make rss work

    So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.

    RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.

  • How to make MDM work?

    Hi Guy,
    I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
    The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
    Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
    Thanks
    Parinya.

    Hi Jack,
    For Demo Purpose,
    1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
    2.Extract those master datas from R/3 Servers.
    3. You will get the xml file of master datas.
    4.Open the import manager and import the xml file into  the MDM server.
    5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
    6.Once you imported the record ,u can see the records in the MDM Data manager.
       We can Create/edit/Delete those records .
       We can merge the records for consolidation purpose.
       We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
    7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
    8.Syndicator is used for sending data back to the R/3 servers
       Here also we have to do Mapping against R/3 servers.
       Using XI We can connect the R/3 Servers.
    Hope u will understand this.
    This is very simple example for MDC-MDH Scenario.
    For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
    Best Regards
    Devaraj PK

  • How to make stylesheets work ???urgent

    Hi,
    How to make stylesheets work.I tried including the CSS file on the
    header
    <%@ include file="stylesheets.css" %>
    <%@ include file="stylesheets.inc" %>
    and both options does not work. can somebody tell me what is wrong here.
    Thanks
    jack

    Hi,
    below thing does not work ?? any idea ??
    <TITLE>IBMSWG - <%= childCategoryListBean.getCurrentCategory().getName() %></TITLE>
    <META NAME="Keywords" CONTENT=" passive, components">
    <META NAME="Description" CONTENT=" varistors">
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <link rel="stylesheet" href="stylesheets.css" type="text/css">
    <script language="JavaScript">
    <!--
    function xxx
    Thanks
    jack

Maybe you are looking for

  • Spotlight/Gaming Sweetie Bianca made her MSI Brand Ambassador debut

    (MSI eSport News Report)2014 MSI continuedto popularizing the global professional Electronic Sport (eSport) and made every effort to supporting the worldwide selected eSport gamers and eSport teams. Last year MSI sponsored a popular female eSport pla

  • AF:ValidateLongRange Range Issue

    Hi, JDev Version : 11.1.1.6.0 I have a case where I need to have an InputText component with af:ValidateLongRange in it.   <af:inputText label="Long range validator" maximumLength="21"                      autoSubmit="true" immediate="false"         

  • First Row Record is not inserted from CSV file while bulk insert in sql server

    Hi Everyone, I have a csv file that needs to be inserted in sql server. The csv file will be format will be like below. 1,Mr,"x,y",4 2,Mr,"a,b",5 3,Ms,"v,b",6 While Bulk insert it coniders the 2nd column as two values (comma separte) and makes two en

  • Movies Almost Famous and Almost Heros error on TV, but avail via iTunes

    When I try to access Almost Heroes or Almost Famous via my TV I get an error that iTunes store is unavailable, yet any other movie can be accessed just fine. I can access the details on both the above movies via iTunes on my laptop, including playin

  • Purchase order enhancement is not effective

    Hi Expert,    I have a requirement about the purchase order. The requirement is that we must maintain the field collective no under the document header level. If there is no value exist , I can't print out the purchase order for the signature. I have