NFS File adapter donu00B4t generate log file.

Hello!
We have a problem with a File adapter. when adapter catch file, this one don´t archive this file into archive directory.
We have:
Processing mode: Archive.
Archive directory : /XIcom/INT181_GECAT/LOG
This directory is created correctly.
Someone can i help me. Thanks.
Best regards.

Hi ,
>>>NFS File adapter don´t generate log file
Do you mean you are not getting the processed files archived only when the file adapter set to NFS File system ?
Did you try same thing by setting File adapter as FTP ?
If you face same issue with File adpter set in FTP mode also then there is some issue with access to the folders.
Please check this ...
Regards,
Nanda
Message was edited by: Nanda kishore Reddy Narapu Reddy

Similar Messages

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

File Adapter to read Zip file and send it as input to another webservice

Hi,
I have the below requirement:
1. A service will generate 3 attachments and place it in a particular directory.
2. SOA service has to pick those 3 files and send those files as input to another custom application which will email.
Design :
1. First SOA will create an archive file of those 3 attachements and then file adapter will poll for that zip file in that location and send that file as a whole to the custom application.
Query:
Now my question, is the above design feasible? If so, how to configure the file adapter to pass the file as input to that custom application?
Kindly do the needful
Thanks,
Priya

You can accomplish this via java embedding activity...Create a java embedding, which will create a zip file.. this java code is easy to implement..
You can also do away with un-necessary polling file adapter.. and you can use "Synchronous File Read" operation of File Adapter.. For Sync Read, you'll have to pass the zip file name, which you can easily fetch from java embedding activity..
Let me know, if this doesn't work.

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

Sender File Adapter stop processing all files

Hello all,
the file adapter pick up all files in the directory by default.
if a large number of files are in the directory then this could slow down the pi processing.
is there any way to process only one file per polling??
regards

>
Ralf Zimmerningkat wrote:
> Hello all,
> the file adapter pick up all files in the directory by default.
> if a large number of files are in the directory then this could slow down the pi processing.
> is there any way to process only one file per polling??
>
> regards
I do not have any proble if you have got the answer. BUT this blog says how to exclude the other files from the same folder.
Your Case: For example, Your Sender CC wants to pick up file ABC.txt from /xyz dir, now suppose there are 10 thousand files of same name in the dir and you want ABC.txt should be picked up one by one, So how this blog is going to help you. Can you Plz explain to me and others too?
@Sachin may be you can throw some light on this... may be I am missing something.

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

File Adapter is not polling File.

Hi All,
I am using file adapter to poll a file. When I am restarting server then it is picking file. After then when I am dropping a file then File Adapter is not picking File.
Can any one guide me what si problem?
I am using SOA SUITE 10.1.3.4
Thanks in Advance.

First clusterGroupId is a unique value. Do not use the same clusterGroupId across different adapters even in different process.
Once clusterGroupId is defined, the multiple activations of the same adapter Activation Agent is to be detected implicitly and automatically by all the instances of the adapter framework active in that cluster. The cluster will allow onlye one node activation to start the reading the files/messages. The adapter framework instances chooses one among multiple nodes, randomly to assume the Primary Activation responsibility. The other activations (instances) in the cluster will initiate to a hot stand-by state, without actually invoking EndpointActivation on the JCA resource adapter.
If a primary activation at some point becomes unresponsive, is deactivated manually or if it crashes/exits, then any one of the remaining adapter framework members of the cluster group will immediately detect this, and reassign the primary activation responsibility to one of activation agents standing by.
This feature uses JGroups underneath for the implementation, hence the clusterGroupId property. These features require cluster and JGroups configuration in collaxa-config.xml and jgroups-protocol.xml. All BPEL instances participating in the cluster must share the same cluster name in collaxa-config.xml,and the same multicast address and port in jgroups-protocol.xml.
As far as for this issue, I too face the same across diff environments and searching for the exact reason. I believe this happens when primary activation agent crashes, the hand-over to the other node is not happening properly through jgroups.
Nirav

File adapter picking up partial files

Hi All,
We are facing a wierd problem with the File Adapter.
The problem is that, we are getting the xml files from the source system, and PI is supposed to pick them up and process them. Sometimes, the file adapter is picking up the empty files / partial files, i.e., before the file is completely written on to the FTP folder.
We tried increasing the polling interval. But this did not help. Since we are taking the files from the FTP, the option "MSecs" in Additional Parameters also will not work. As we are on PI 7.0 SP13, we tried to search for the "Empty File Handling" option wherein we can make the file adapter skip the 0kb files. But we are not able to find that option anywhere.
Please help us find a solution to this problem.
Thanks,
Hari.

Hari,
In sender communication channel click on Advanced. Then you see the paramter Msecs to Wait Before Modification Check. Add a value 3000. Then you should be good.
Regards,
---Satish

XI File Adapter sending/receiving zip files

Can the XI File Adapter create a zip file to send outbound from XI and/or can it also translate a zip file inbound into XI?

Hi Kirk.
What you can do is use the OS command option on the adapter in order to unzip the file after the File\FTP adapter completes its file transfer to the specified path.One of my colleagues used a freeware zip app. that excepts an os command actions.
I know it works for file receiver but not sure about the sender. check SAP Note 801926 for more sender adapter parameters.
Regards
Nimrod Gisis

File adapter reading while the file is still being written....

Hello BPEL Gurus,
I had a quick question around BPEL or ESB file adapter. Does BPEL file adapter starts reading a huge file that is being written or it waits until the writing process is completed and file is complete?
Any response is highly is appreciated.
Thanks.
SM

It goes like this. At every polling frequency, the adapter looks into the directory for the files with specified pattern (e.g. *.csv, MYCOMPANY*.txt) and specified condition, e.g. minimum file age. This means if there will be 2 files available with matching criteria, the both will be picked up and processed simultaneously in two different BPEL instances. No specific order of execution. However you will find the instances in BPEL console with little delay based on file size.
Perhaps you can elaborate your scenario further. Do we have knowledge of the file name that are to be picked up from the folder. You may use synchronous read option. If you are using 10.1.3.4 version then you can specify the file name before file adapter makes a synchronous read into the give directory.

How do you generate log files using ActionScript 3?

Is there any way to log activity using AS3 by using a Red5 Media Server?
I cam across www.as3commons.org/as3-commons-logging but in this I have no clue how to access logfiles or where the logfiles are generated.
I was wondering if there's a way to generate and store log files on a media server. Say for example, I need to log when the user starts recording a video, when the connection to the media server is successful and so on.
Any help would be greatly appreciated. Thanks.

In FMS backend scrips also works then log file can be create from beckend scripts.

WCF 4.5 doesn't generate log file

Hi,
Recently, I am using WCF 4.5 windows 7 for my testing of WCF appliation. When enable tracing, the WCF servce works fine, however, the WCF application doesn't generate the log file(
web_messages.svclog or web_tracelog.svclog).
Here are the configuration of the web.confi
g file:
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="警告,ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source propagateActivity="true" name="System.ServiceModel" switchValue="详细,ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="e:\project\test\wcf_tutorial\webapp_consume_wcf\webapp_consume_wcf\web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="e:\project\test\wcf_tutorial\webapp_consume_wcf\webapp_consume_wcf\web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"></serviceHostingEnvironment>
<diagnostics wmiProviderEnabled="true" performanceCounters="All">
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" />
</diagnostics>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true"></serviceHostingEnvironment>
<diagnostics wmiProviderEnabled="true" performanceCounters="All">
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" />
</diagnostics>
</system.serviceModel>
Regards

Hi Paul_PMA,
Based on this
MSDN document, trace files are not created without initially creating the log directory. Make sure that the directory for
web_messages.svclog or web_tracelog.svclog exists, or specify an alternate logging directory in the listener configuration. Please also mark sure that IIS has write permissions to the log file path.
For more information, please try to refer to the following articles:
#Configuring Message Logging:
https://msdn.microsoft.com/en-us/library/ms730064(v=vs.110).aspx .
#Simple Steps to Enable Tracing in WCF:
http://www.codeproject.com/Articles/420538/Simple-Steps-to-Enable-Tracing-in-WCF .
#How to enable wcf tracing and wcf message logging:
http://dotnetmentors.com/how-to-enable-wcf-tracing-and-wcf-message-loging.aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Rman can not able generate log file in linux shell script

Friends,
In shell script we use below command to save processing information.
$ORACLE_HOME/bin/rman "target=/" > ${LOG} <<- EOF
Recent days, it does not work and return message as
./test.sh: line 78: LOG: command not found
./test.sh: line 83: /u01/test/oracle/scripts/crons/logs/testdb_013120141148.log: No such file or directory
find: /u01/test/oracle/scripts/crons/logs: No such file or directory
It seems that rman can not create a log file when we passed log variable value.
Thanks for help

Hi,
Seems some one removed the log directory.. check the log directory as specified in the script. and create that one if not exist.

Sender File Adapter Not Picking Any File

Dear Expert,
I am newbie in PI. Just tried to create File Content Conversion Scenario. Details as follow :
1. Source Directory ..\file\log\test_q.txt
2. Target Directory ..\file\log\xml\test_q.xml
Transport Protocol : NFS
Message Protocol : File Content Conversion
Adapter Engine : Integration Engine
I have completed all the design and configuration in IR and ID. However, when I produce the log file in the directory, nothing happen.
Hacing checked in the RWB as well, I could not find any clue. simply nothing happen.
Would you please advise me on how to trigger the interface? As per my understanding, sender file adapter will be activated directly once the file is created.
Thank you very much in advance.
Best Regards,
Y

Hi Yonisiwa,
Things you should check here are:
1) If the sender file adapter is active or not.
2) If the source directory is correctly spelt or not. (Check if you are using the correct slash \ or /)
3) The file name/mask is correct or not.
4) The polling interval is too long.
Alternatively, you can check the message monitoring in RWB at the adapter level and go into the audit log if the message.
There you can see the reason for the file not being picked up.
Also check the Communication Channel status in the Component Monitoring link in RWB.
Regards,
Ravi Kanth Talagana

NFS File adapter donu00B4t generate log file.

Similar Messages

Maybe you are looking for