NFS Sharing Tab is not found..NFS sharing provisioning fails with error....NFS sharing using command fails in windows 2008 r2

Hi All,
Operating System: Windows 2008 R2 Enterprise SP1
H/w: VMware virtual machine vmx 09
Installed: File server role with "Services for network file system"
Server for NFS and Client for NFS services and up and running.
But when I try to create an NFS share using the folder properties the NFS Sharing tab is missing.
I tried to provision an NFS share using server manager "New NFS share folder cannot be created"
Noticed Event ID 1015 from NFSserver " Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated"
Tried to create the NFS share using command line but that too failed.
Request all to kindly assist me in isolating and fixing this issue.
Thank you so much
Shaji P.K.
Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated
NFS server is so weak (especially for 2008 R2) and keeping in mind you run that all hosted by VMware ESXi the best thing you can do is to get rid of using Windows as a NFS server completely and spawn a FreeBSD or Linux VM with a decent and recent version
of Samba.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Similar Messages

Operating system not found when deploying to machines with two hard drives using MDT 2013.

Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the
machine to boot by swapping the hard drives' boot order, but the task sequence won't complete after this. The deployment works fine on machines with one hard drive, and I'm not getting any errors from the task sequence. I'm deploying windows7
enterprise x64 using MDT2013. This is a new custom image and task sequence generated using MDT2013. I can't remove the second hard drive because there are scripts that run on the second hard drive during deployment and also because I don't desire
to remove and re-install 250 hard drives. I've not experienced this problem with earlier versions of MDT.

The bdd.log file you sent does not show two internal drives, it shows only one.
Console > Please wait while DiskPart scans your configuration... ZTIDiskpart 12/16/2013 9:57:04 AM 0 (0x0000)
Console > DiskPart has finished scanning your configuration. ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk ### Status Size Free Dyn Gpt ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > -------- ------------- ------- ------- --- --- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Disk 0 Online 60 GB 60 GB ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > DISKPART> ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume ### Ltr Label Fs Type Size Status Info ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > ---------- --- ----------- ----- ---------- ------- --------- -------- ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Console > Volume 0 D DVD-ROM 0 B No Media ZTIDiskpart 12/16/2013 9:57:05 AM 0 (0x0000)
Is this the problem?
Keith Garner - keithga.wordpress.com

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

SetID not found for name='BUSINESS_UNIT', value='' with record 'BI_DISC_SUR

Hi
While entering identifier in Discount/Sub charge page it giving following error:
SetID not found for name='BUSINESS_UNIT', value='' with record 'BI_DISC_SUR', tree ''. (2,214) FUNCLIB_CA.RENEWAL.FieldFormula Name:SelectDiscountSurcharge PCPC:12887 Statement:186
Called from:CA_RNW_CYCLE_PNG.GBL.CA_RNW_LN_REDUC.DISC_SUR_ID.FieldChange Statement:9
The PeopleCode built-in function GetSetID has been called with parameters that were
not found in the table set definitions.
Review the table set control tables and the PeopleCode and correct whichever is wrong.
Please help me to solve this issue.
Thanks
Mani

did you check if your business unit (setcontrolvalue) is setup with record group BI_04, and it has a default setid associated.

Could not found any usage key in the work center WC001(Use T-CODE CR02)?

my question:
(1) I have created one Work Center WC001 and one Plant HJW1.
(2) I have created one Routing with T-CODE CA01.
(3) Then I use T-CODE CA02 to change this Routing.
(4) When I enter the Head details screen,I click the Operations button to enter the Operations Overview screen.
(5) In the Operations Overview screen list,I input the Work Center WC001 and the Plant HJW1 at the first line and press enter.Then the sap raise error message like below.
(6) The question was: I could not found any usage key in the work center WC001(Use T-CODE CR02)! Could any one tell me the answer or give me some advice to resolve the problem?Thank you so much.
error message:
Work center WC001 plant HJW1 does not exist for task list type N
Message no. CR084
Diagnosis
You want to allocate the work center WC001 to a task list of the type N . However this work center is not intended to be used in a task list of the type N.
Procedure
The usage of a work center in task lists is restricted via the usage key. You define this key in work center customizing and allocate to it those task list types in which a work center with this usage key can be used.
Proceed as follows:
Check the usage key for the work center WC001 in work center maintenance.
If necessary change the usage key in the work center or change the allocation of task list types to the usage key in customizing or
allocate to the task list a work center which is valid for use in a task list of the type N.

Hi
1) Check what task list usage key you entered for the work center in the basic data . If it is 009 then the work center can be used in all task list type.
2) If you have defined and used any other usage key , ensure that for this key , the routing type N is allowed in OP45.
Regards,
Ramasamy

Context menu tab SERVICE not found in IB PI 7.1

Hi,
I am working in PI 7.1 for a scenario IDOC r/3 to PI 7.1 file.
Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 > Message split according to Receiver list>'Party and service not found'.
I am new to this. Could someone guide me with steps or links. I searched some links but I didnt get answers.
Thanks,
Deepak.
Edited by: KDeepak on Jul 2, 2009 2:36 PM

Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 --> Message split according to
Receiver list-->'Party and service not found'.
Is it that you are looking for a tab which was called Business Service in PI7.0?........if yes then in PI7.1 we do not have such a tab.....it has been renamed as Business Component ......in ID right-click -
> New -
> Collaboration Profile -
> Business Component ---> Give Name ---> Click Create and then one more Business Component (Service) will be created under Communication Component section of ID
In PI7.1 Business System, Business Component, Integration Process will be under Communication Component..
Check if this is what you are looking at...
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 3, 2009 10:09 AM

Weblogic 10.3.5 Install Failing on Windows 2008 R2 64bit Shared Drive

I am attempting to install Weblogic 10.3.5 on a Windows 2008 R2 64bit machine.
This will be part of a scaled out OBIEE environment.
As per Oracle's instructions (http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#BIEIG2028) I am attempting to install the Middleware Home Directory to a shared drive (DFS).
When I get past the "Choose Product Installation Directories" I get a "Insufficient Disk Space" error saying there's 0 MB available on my shared drive, which is clearly not the case.
I have verified that I have full access to the shared directory.
I have also tried with several other non-DFS directories.
Tried with java version 1.6.0_24 Oracle JRockit build R28.1.3-11-141760-1.6.0)24-20110301-1430-windows-x86_64
Tried with java version 1.6.0)24 64-bit server (no JRockit)
All with the same results.
I've seen some people post about getting the same error in Mac installs where the solution was to specify -d64 on the commandline, but this is not in the windows 1.6 JDK. I tried -server, but got the same results.
I've also seen some people post about getting the same error in Unix installs where the solution is to point to a different version of df which is used to check space on the file system.
I have yet to find a solution in Windows 2008 64bit that applies to me.
Any ideas?

I was able to get around this by installing from the jar using the -Dspace.detection=false option
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e14774/weblogic_server_issues.htm#BCFFDCFI

Page Not Found and The parameter is wrong errors

We are experiencing a problem with out 4.5 portal. After people log into our portal they are seeing either a "The parameter is wrong" page displayed or a Page Not Found, Bad request. If the user the goes to our portal home page the will the see they did successfully sign on to the portal and all is well. What could be causing this?

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]
[[How to set the home page]]: Firefox supports multiple home pages separated by '|' symbols.

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

"XML File not found for the Container DataBindings.cpx" error after deploy

Hello,
I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
In my EAR-File the DataBindings.cpx is at:
\WEB-INF\classes\
My JSP-File:
<jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
My web.xml:
<context-param>
<param-name>CpxFileName</param-name>
<param-value>DataBindings</param-value>
</context-param>
My DataBindings.cpx:
<?xml version='1.0' encoding='windows-1252' ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
Package="" ClientType="Generic">
<pageMap>
</pageMap>
<pageDefinitionUsages>
<page id="eonerrorPageDef"
path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
<BC4JDataControl Configuration="AppModuleLocal"
Package="model.data"
xmlns="http://xmlns.oracle.com/adfm/datacontrol"
id="DataModule">
<Parameters/>
</BC4JDataControl>
</dataControlUsages>
</Application>
What can i do?
Thanks, steve

Adding the dependency in the ViewController fixed this for me.
I'm using two AppModules in the controller and the second one wasn't being picked up.
I was able to fix this by:
Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
HTH
Phil

When I download Itunes I get an error that my apple application support was not found how do I fix this error

I have downloaded, uninstalled and redowloaded Itunes about 50 times and I continue to get the error that my apple application support was not found and that I should uninstall and reinstall Itunes. I can not get to my music and this is starting to really make me mad. Can anyone (other than some bogus virus filled program) give me a hint as to how I can fix this so I can play my music?

Hi jahhaas,
Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
http://support.apple.com/kb/HT1923
Cheers,
GB

HTTP 404 File not Found running a page created with the wizard

Hi all,
I created a page "tabular form" with the wizard to delete and update records in a table.
All pages of the application are ok. Only this page, when refresh after click on the "delete" or "submit" button send the message "HTTP 404 - File not found".
OS - Windows XP
DB - 10.1.0.4
HTMLDB 2.0
any idea?
thanks in advance.

Hi Scott,
this is the error.log
[Fri Oct 06 11:39:41 2006] [error] [client 10.20.101.243] [ecid: 1160127581:10.20.101.243:3860:2904:21,0] mod_plsql: /pls/htmldb/wwv_flow.accept HTTP-404
wwv_flow.accept: SIGNATURE (parameter names) MISMATCH
VARIABLES IN FORM NOT IN PROCEDURE: F51,F52,F53,F54,F55,F56,F57,F58,F59
NON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM:
This is my first application with htmldb and i don't understand where is the error because i don't added parameter after the wizard creation. I just created the page and run. If this page start the first time when is called from another page, why after refresh fail?
thanks, Fabio

File not found: Label (variation label page giving error)

Please bear with me as I have to explain.
I have a publishing site with variations.
English (source)
Spanish (target)
The site was working fine since the beginning it was created a few months ago. But today something happened to the top navigation in Spanish site. The option in "Navigation" under "Site Settings" selected was "Show current site navigation"
but it started showing all other links which are not part of it.
I then changed it to "Show parent site navigation" upon which it showed correct links based on parent site. So I tried to change it back to "Show current site navigation" but still it showed those incorrect links and not the actual site
navigation.
I thought let's restart IIS which I did and viola it almost solved the problem. Now I could see current site navigation but there was one link missing which I added a couple of days ago.
I tried to investigate as to what happened exactly and tried to access "Variation Labels" page in site setting but got error "File not found: Label"
It turns out somehow there is a field called "Label" in Variations list which is hidden or may be somehow its name got changed. I found out using SharePoint Manager 2013. I could access both English and Spanish site variation settings page by going
to the page directly and passing their ID but:
1. Why did it happen? I mean why all of a sudden SharePoint would do this? Or is it one of those SharePoint things which you cannot explain and this is how it does?
2. If let's say somehow "Label" field got deleted then how can I put it back or how to find the new name of this field if it got changed somehow?
3. How do I fix Variation Labels page?
Because of this problem I am also facing another issue and that is there is a page in Spanish in which I have added custom web part that use resource files. It was working fine but after this issue it is showing error that it is not able to find resource files
when they are actually there and are present all the time.

what he did he went to List setting directly and compare it with freshly created list in different farm.
as he mentioned:
"by going to _layouts/ListEdit.aspx?List={GUID of Variation Labels list} and compared the field names with the freshly created site collection on a separate VM with variations"
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

"The HP Deskjet 3050 J610 series was not found." Can't scan with wireless printer to desktop. Help

Our new wireless printer will not scan. I have tried to scan from the computer and get the below error message and then I have activated the scan from printer and when I push the scan button on the printer, I get the same error message.
Thanks!
Product Name: HP Deskjet 3050 J610 Printer/Scanner/Copier
Operating System: Windows 7
Error Message: The HP Deskjet 3050 J610 series was not found - when trying to scan.
No changes made to system

I had some problem. I found you must use HP 'Update IP address' program to add printer instead use window add printer. All programs -> HP ->HP Deskjet 3050 610 series -> Update IP address.

I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

NFS Sharing Tab is not found..NFS sharing provisioning fails with error....NFS sharing using command fails in windows 2008 r2

Similar Messages

Maybe you are looking for