NI 6509 court circuit

Bonjour à tous,
J'utilise une carte NI-6509 (96 I/O) et un boitier SCB-100.
En manipulant, j'ai par erreur fait un C/C entre un I/O configurée en sortie au +5V et une I/O configurée en entrée à la masse.
Depuis, plus rien.
A l'aide de l'outil Measurement & Automation, j'ai testé les ports : Autotest = OK, plus rien sur les sorties (j'ai mis des leds).
Je pensais que la carte était protégée contre les court-circuits.
Quelqu'un a-t-il un élément de réponse?
Merci d'avance

aie !
oui, MAX établira un dialogue avec ta carte et la carte "répondra" ok.
Mais MAX ne permet pas de tester "en réel" les buffers d' entrées/sorties.
Tu as court-juté une sortie TTL au niveau haut, avec une autre configurée au niveau bas ... sans résistance.
Oups ... le courant n'a pas été limité ... à mon avis l' I/O configurée en entrée est morte.
de plus la 6809 est définie comme une carte à 96 voies CMOS/TTL 5V à courant élevé
donc je suppose qu'une sortie "haute" est capable de délivrer un courant non négligeable.
Juste une question,
ta carte comporte 96 entrées/sorties. Tu n'as "plus rien" sur les sorties (tu as mis des leds) ...
Plus aucune I/O ne répond ? Tu n'arrives plus à commander une led sur aucune des 96 I/O ?
(attention, avec une led, il faut une résistance en série ... max 20mA pour une led)

Similar Messages

Courant de sortie analogique maxi et conséquence d'un court circuit (PXI 6221)

Bonjour,
Tout est dans le titre quasiemment,
Je suis à la recherche d'informations concernant la carte PXI 6221 :
- le courant maximal de sortie pour une sortie ana à 10 V : dans les spécications j'ai trouvé : Output current drive............... ±5 mA
je suppose que c'est ça ?
- deuxième point plus délicat : en cas de court-circuit sur une sortie ana, y-a-t'il une protection ? y-a t'il un risque d'endommager la carte ?
Merci

Bonjour,
Merci d'avoir posté votre question sur le forum de National Instruments.
Pour le COURANT de sortie, oui c'est bien + ou - 5mA pour 10V.
Au niveau des courts circuits, biensur il n'est pas conseillé d'en faire. Vous n'avez aucune protection de type fusible ou diode.
Brice S.
National Instruments France

Perte du réseau sur mon iphone 3gs

En fait j'ai fait la mise à jour de mon iphone 3gs iOS 6.1.3..mais depuis qu'il a démarré il fait la recherche du réseau pendant 5 min environ et me met après "réseau indisp".....j'ai essayé de réinitialiser tout le portable mais ça n'a rien changé. J'ai réinitialiser les réglages réseau aussi mais ça aussi ne marche pas!je suis désespéré...quelqu'un pourrait m'aider SVP?

Bonsoir, or rather, "Good Evening"!!!
Ce forum est en anglais, aussi il y a peu de chance que vous receviez une réponse à votre question. Sinon, il est vrai que l'iPhone 4 a rencontré et rencontre encore des problèmes de connexion dus au fait qu'en plaçant la main ou un doigt sur le petit joint en silicone noir situé entre la petite partie en alu qui cercle l'iPhone par le bas et celle, plus grande, qui le ceinture par le haut, l'utilisateur créé un court-circuit qui empêche la réception des ondes. En fait, il s'agit ni plus ni moins que d'un parasitage, encouragé par le fait que la peau humaine est conductrice... d'électricité et autres ondes. Le mieux est donc, soit de tenir son iPhone 4 par un autre endroit (pas toujours facile), soit de l'équiper de ce qu'on appelle un "bumper" (on en trouve à la FNAC pour 10 à 20 euros, selon le modèle), qui isolera l'antenne externe du contact de la peau.
Sorry guys for this long tirade in French, but this gentleman has been experiencing the same "bad reception due to bad hand placement" that has recently made Apple a laughing stock on the mobile phone market... Had to set things straight with him, and I thought it was better to do it in his (and my) maternal language...

Perte de réseau sur l'iphone 4...

Bonjour,
j'ai eu récemment un iphone 4 en 4.2.1.
Le problème que j'ai constaté c'est qu'il y a généralement une perte de réseau quand je le tiens dans la main. Je tiens à préciser que je sais que de nombreuses personnes ont eu ce problème...que puis-je faire ? l'envoyer au SAV ? le restauré ? faire jouer la garantie ?
Merci de votre aide.

Bonsoir, or rather, "Good Evening"!!!
Ce forum est en anglais, aussi il y a peu de chance que vous receviez une réponse à votre question. Sinon, il est vrai que l'iPhone 4 a rencontré et rencontre encore des problèmes de connexion dus au fait qu'en plaçant la main ou un doigt sur le petit joint en silicone noir situé entre la petite partie en alu qui cercle l'iPhone par le bas et celle, plus grande, qui le ceinture par le haut, l'utilisateur créé un court-circuit qui empêche la réception des ondes. En fait, il s'agit ni plus ni moins que d'un parasitage, encouragé par le fait que la peau humaine est conductrice... d'électricité et autres ondes. Le mieux est donc, soit de tenir son iPhone 4 par un autre endroit (pas toujours facile), soit de l'équiper de ce qu'on appelle un "bumper" (on en trouve à la FNAC pour 10 à 20 euros, selon le modèle), qui isolera l'antenne externe du contact de la peau.
Sorry guys for this long tirade in French, but this gentleman has been experiencing the same "bad reception due to bad hand placement" that has recently made Apple a laughing stock on the mobile phone market... Had to set things straight with him, and I thought it was better to do it in his (and my) maternal language...

Remplacer un interrupteur

bonjour à tous,
voilà mon problème,
j'ai un petit boitier avec un interrupteur physique pour le on-off (il est associé à une pompe).
je désire gerer cette pompe avec Labview, je dispose d'un cable rs232, et j'ai pu trouver comment regler ma vitesse, ...
mon problème réside maintenant dans cet interrupteur.
en effet dans le schema de mon cable rs232, je sais que si l'interrupteur se situe entre les pins 6 et 7.
mais comment simuler cet interrupteur (je ne veux pas avoir à passer par celui physique de mon boitier).
je ne vois pas très bien comment je pourrais proceder.
merci d'avance d'avoir pris le temps de lire mon problème et encore plus merci si vous pouvez m'aider à le résoudre!
Résolu !
Accéder à la solution.

Bonjour,
Si je comprends bien, la pompe est reliée à un pc par une laison RS232 qui permet de régler la vitesse de la pompe.
Il y a en plus un boitier avec un interrupteur qui permet de court-circuiter les pins 6 et 7 de ce même câble pour allumer / éteindre la pompe ?
Pourquoi ne pas simplement commander une vitesse à 0 pour l'arrêter ?
Cordialement,
Micaël DA SILVA

Comment effacer l'utilitaire "Adobe acrobat Reader installer" ?

Bonjour,
Je suis connecté au Adobe Creative Cloud et je tiens à jour toutes les applications à jour via l'utilitaire prévu pour.
Toutefois, depuis une mise à jour d'Acrobat Reader, l'utilitaire "Acrobat Reader Installer" bondit de mon dock et me "demande" depuis deux mois, à chaque connection à mon compte système (Apple MacBook Pro sous Mac OSX.8.3), si je souhaite mettre à jour le Reader ?
Comment effacer cet utilitaire ou le court circuiter ?
Je vous remercie par avance pour toute aide.
Cordialement,
PG

Bonjour,
Je vous remercie. J'ai confondu Adobe Reader et son ancien nom.
Adobe Reader : http://get.adobe.com/fr/reader/
Mais je viens d'effacer la version de ce logiciel Adobe Reader (lien ci-dessus), car avec Cloud Creative Suite je peux disposer de Acrobat XI. Et apparemment il pourrait y avoir un conflit entre les deux logicieels lors de leur intégration dans les différents navigateurs Web installés (safari, chrome, Firefox) ?
D'où, je pense, cette invitation répétitive à réinstaller Reader, à chaque ouverture de session, puisque l'intallation de Reader échouait.
Cordialement,
Ppg198

Why my p key p0 gives me on my Mac Book Pro Keyboard

why my p key p0 gives me on my Mac Book Pro Keyboard

The p and 0 characters are in the same diagonal column on the keyboard, hence share one of the keyboards printed circuits. The behavior you describe, involving two or more keys that are associated by location or arrangement, often indicates damage to the keyboard. This damage can be from dirt or a circuit failure, but usually results from a liquid spill onto the keyboard creating a short circuit; this short circuit can link two rows or columns, or just two keys in the same row or column.
A good way to test for this is to use a different keyboard. If the problem disappears when using the different keyboard, then it can be assumed the original keyboard is damaged. If this is the case, the question then is to consider whether to attempt repairs, or replace.
(translation via bablefish -)
Le p et les caractères 0 sont dans la même colonne diagonale sur le clavier, par conséquent la part un des circuits imprimés de claviers. Le comportement que vous décrivez, impliquant deux clefs ou plus qui sont associées par endroit ou arrangement, indique souvent des dommages au clavier. Ces dommages peuvent être de la saleté ou d'un échec de circuit, mais résultent habituellement d'une flaque liquide sur le clavier créant un court-circuit ; ce court-circuit peut lier deux rangées ou colonnes, ou juste deux clefs dans la même rangée ou colonne.
Une bonne manière de déterminer ceci est d'utiliser un clavier différent. Si le problème disparaît en employant le clavier, alors lui différents peut être supposé que le clavier original est endommagé. Si c'est le cas, la question alors est de considérer si essayer des réparations, ou les remplacer.

Problem NI 6509 DI: lines short-circuited?

Hi Everybody,
I have some problems with an NI 6509 card. I configure
Port0 as Digital Input, but while my program runs (and after....),
lines of port 0 are short-circuited, that is, I am not able to acquire
TTL signals, and, moreover, if I use a multimeter to check the
impedence between Port0-line0 and ground, I get 0! (beeeep....) And so
on for any other input digital line
   If I run max, test panels runs correctly, I have no "beep" from my multimeter.
   Thanks....
graziano

Hi Matteo,
   now everything works, I changed some stuffs....
   I use LabWindows 7, and I will keep it, because I have to
do bit maskings, bit operations, and so on. that is not easy in
LAbView, maybe because I'm experienced in LabWindows and C, while I'm
quite new to LabView.
   Anyway,there's one thing I don't like: that after a device
reset, port 0 and 1 are shortcircuited, that's not good for my
application, but I can bypass this problem!!
Goodbye and thanks!
graziano

6509 Power Supply Output Failure

I have a 6509 chassis w/1 Sup720 and dual 3000W power supplies. When I power it on it runs for about 3-5 minutes and the power supplies shutdown. The red "Output Failure" light comes on. They are connected to 110V/20Amp circuits. These are the same circuits that were used with a previous set of power supplies (lower wattage). I removed everything from the chassis except for the fan tray and the sup module to reduce the power demand. Same result. Thoughts?

Hi
Have u tried running the box with single power supply instead of both supplies ??
Also are u getting the LED status on both the power supply unit ??
You can also use show environment power,show environment,show power commands to check out the power supply status.
for more info on power supply management with 6500 do check this link out..
http://cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa8.shtml
regds

How can I get a list of IP's that have got access to my account I have a court summons and the information could only have been gathered from my Icloud account. Apple cant or wont help me. Urgent please have to go to court tomorrow.

Need some urgent help please.
I have a court summons for some information that has been taken from my Icloud account.
I believe my ex employer has hired someone to hack into my account. They have had my laptop inspected by a forensic company. Orginally they did not know what the five emails I sent myself were about. Now they do. I believe they have hacked my Icloud account. I have asked Apple to help but they are refusing is there any way I can find out please feel free to email me [email protected] Thanks have to go to court tomorrow morning.

It sounds like you really might want to consider seeking legal advice for this matter.

With some websites (eg the EU Court of Justice) I can't either open or download the pdfs of court judgments - why is this and how do I get things to work?

I have Firefox 4.0.1. Most of the time I can open or download pdfs supplied by business sites without any problem. But sometimes (eg with the EU Court of Justice website) I can no longer do this. I say "no longer" because I could do it with earlier versions of Firefox. The only way I can now get at the EU Court of Justice pdfs and other unobtainable pdfs is to fire up Internet Explorer, which seems a bit silly. How can I get Firefox 4.0.1 to open up / download these pdfs?

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

NAT IN CATALYST 6509-HOW TO DO IT?

Hello friends,
The LAN CAMPUS is conformed by more than 20 VLANS and all the PCs can go to Internet.
Now I have a new network cloud and I have to attach that network into my campus.
To do that, I have a Public IP Pool to do translation.
But I just need that some IPs (from diferent Vlans)could go to the new Network while keep having connecivity to Internet.
So my Question is:
I am not interested in perform Static NAT.
I wonder if I can NAT a group of IPs (in different subnets) with the Public POOL. i.e: group to group.
I have a PIX 525. I could do it in that PIX but I think It could be better to do it in the Catalyst 6509. (Because the Pix CPU percentage is High-and sometimes I have problems)
How can I do NAT in C 6509?
I am attaching a referecial picture.

Hi bosalaza:
yes, I think ACL will help so much...
Look I need to translate only this IPs:
172.16.8.56
172.16.24.85
172.16.33.95
172.16.86.56
172.16.125.81
172.16.157.89
To this Public IPs:
200.xx.45.170
200.xx.45.171
200.xx.45.172
200.xx.45.173
200.xx.45.174
200.xx.45.175
But whitout Static NAT.
And do it but in the C6509.
I have no enough experience to perform NAt in C6509.
Thanks in advance.

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

A Problem with VSS in the 6509

Hello,
I have a problem with VSS in the 6500, when the switch 1 is active,probably a few months will switchover to switch 2 and switch 1 reload.
config:
switch virtual domain 1
switch mode virtual
switch 1 priority 110
switch 2 priority 110
interface Port-channel1
description To 6509-B-VSS
no switchport
no ip address
switch virtual link 1
mls qos trust cos
no mls qos channel-consistency
interface Port-channel2
description 6509-A-VSS
no switchport
no ip address
switch virtual link 2
mls qos trust cos
no mls qos channel-consistency
interface GigabitEthernet1/4/20
no switchport
no ip address
dual-active fast-hello
interface TenGigabitEthernet1/5/4
description To 6509-B-VSS
no switchport
no ip address
mls qos trust cos
channel-group 1 mode on
interface TenGigabitEthernet1/5/5
description To 6509-B-VSS
no switchport
no ip address
mls qos trust cos
channel-group 1 mode on
interface GigabitEthernet2/4/20
no switchport
no ip address
dual-active fast-hello
interface TenGigabitEthernet2/5/4
description To 6509-A-VSS
no switchport
no ip address
mls qos trust cos
channel-group 2 mode on
interface TenGigabitEthernet2/5/5
description To 6509-A-VSS
no switchport
no ip address
mls qos trust cos
channel-group 2 mode on
show switch virtual redundancy
                  My Switch Id = 2
                Peer Switch Id = 1
        Last switchover reason = active unit removed
    Configured Redundancy Mode = sso
     Operating Redundancy Mode = sso
Switch 2 Slot 5 Processor Information :
        Current Software state = ACTIVE
       Uptime in current state = 5 hours, 24 minutes
                 Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXJ5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 31-Jan-13 14:30 by prod_rel_team
                          BOOT = sup-bootdisk:/s72033-ipbasek9-mz.122-33.SXJ5.bin,12;
        Configuration register = 0x2102
                  Fabric State = ACTIVE
           Control Plane State = ACTIVE
Switch 1 Slot 5 Processor Information :
        Current Software state = STANDBY HOT (switchover target)
       Uptime in current state = 5 hours, 18 minutes
                 Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXJ5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 31-Jan-13 14:30 by prod_rel_team
                          BOOT = sup-bootdisk:/s72033-ipbasek9-mz.122-33.SXJ5.bin,12;
        Configuration register = 0x2102
                  Fabric State = ACTIVE
           Control Plane State = STANDBY
show log
Jun 21 11:20:52.742: %VSL-SW2_SPSTBY-5-VSL_CNTRL_LINK: New VSL Control Link Te2/5/4
Jun 21 11:20:52.786: %VSLP-SW2_SPSTBY-3-VSLP_LMP_FAIL_REASON: Te2/5/4: Link down
Jun 21 11:20:52.786: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   Last VSL interface Te2/5/4 went down
Jun 21 11:20:52.790: %VSLP-SW2_SPSTBY-2-VSL_DOWN:   All VSL links went down while switch is in Standby role
Jun 21 11:20:52.790: %DUAL_ACTIVE-SW2_SPSTBY-1-VSL_DOWN: VSL is down - switchover, or possible dual-active situation has occurred
Jun 21 11:20:53.622: %SYS-SW2_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Jun 21 11:20:54.678: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
Jun 21 11:20:54.682: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
Jun 21 11:20:54.738: %SATVS_IBC-SW2_SP-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP packet: (SA/DA:0x4/0x4, SSAP/DSAP:0x19/0x0, OP/SEQ:0x320/0x8FD9, SIG/INFO:0x1/0x502, eSA:0000.0500.0000)
Jun 21 11:20:56.490: %SATVS_IBC-5-VSL_DOWN_SCP_DROP: VSL inactive - dropping cached SCP packet: (SA/DA:0x14/0x4, SSAP/DSAP:0x18/0x0, OP/SEQ:0x19/0x98, SIG/INFO:0x1/0x502, eSA:0000.1500.0000)
Jun 21 11:21:02.125: %VSDA-SW2_SP-3-LINK_DOWN: Interface Gi2/4/20 is no longer dual-active detection capable
Jun 21 11:23:27.719: %VSLP-SW2_SP-5-RRP_ROLE_RESOLVED: Role resolved as ACTIVE by VSLP
Jun 21 11:23:27.719: %VSL-SW2_SP-5-VSL_CNTRL_LINK: New VSL Control Link Te2/5/4
Jun 21 11:23:27.799: %VSLP-SW2_SP-5-VSL_UP: Ready for control traffic
Jun 21 11:24:43.346: %PFINIT-SW2_SP-5-CONFIG_SYNC: Sync'ing the startup configuration to the standby Router.
Jun 21 11:25:35.304: %VSLP-SW2_SP-5-VSL_UP: Ready for data traffic
Jun 21 11:25:14.946: %C6KPWR-SW1_SPSTBY-4-PSOK: power supply 1 turned on.
Jun 21 11:25:14.950: %C6KPWR-SW1_SPSTBY-4-PSOK: power supply 2 turned on.
Jun 21 11:25:16.975: %FABRIC-SW1_SPSTBY-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
Jun 21 11:25:16.975: %FABRIC-SW1_SPSTBY-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
Jun 21 11:26:13.738: %SYS-SW1_SPSTBY-5-RESTART: System restarted --
Jun 21 11:26:20.446: %SYS-SW1_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:01:47 to ensure console debugging output.
Jun 21 11:26:32.056: %RF-SW2_SP-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)
Jun 21 11:27:56.962: %SYS-SW1_SPSTBY-3-LOGGER_FLUSHED: System was paused for 00:01:24 to ensure console debugging output.
Jun 21 11:27:53.970: %SYS-DFC4-5-RESTART: System restarted --
Jun 21 11:28:34.222: %VSDA-SW1_SPSTBY-5-LINK_UP: Interface Gi1/4/20 is now dual-active detection capable
Jun 21 11:28:36.236: %VSDA-SW2_SP-5-LINK_UP: Interface Gi2/4/20 is now dual-active detection capable
Best Regard

hi,
Information of Last System Crash - SP
Writing crashinfo to bootflash:crashinfo_SP_20140621-192052-TW 00 07 00 00 00 00 00 00 00 0F 00 00 00 00 00 00 10 D6 0A 06 FD 37 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
Jun 21 11:19:43.723: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.723: SW1_SP: IPC: Message 504CA554 timed out waiting for Ack
Jun 21 11:19:43.723: SW1_SP: IPC: MSG: ptr: 0x504CA554, flags: 0x24100, retries: 8, seq: 0x315E1ED, refcount: 1, rpc_result = 0x0, data_buffer = 0x504104BC, header = 0x8A453C8, data = 0x8A453E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57837, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF38, lo: 0x8A453E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 5E 0A 06 01 01 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
Jun 21 11:19:43.723: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504CA554, flags: 0x24100, retries: 8, seq: 0x315E1ED, refcount: 1, rpc_result = 0x0, data_buffer = 0x504104BC, header = 0x8A453C8, data = 0x8A453E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57837, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF38, lo: 0x8A453E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 5E 0A 06 01 01 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
Jun 21 11:19:43.727: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.727: SW1_SP: IPC: Message 4528FE20 timed out waiting for Ack
Jun 21 11:19:43.727: SW1_SP: IPC: MSG: ptr: 0x4528FE20, flags: 0x24100, retries: 8, seq: 0x315E1EE, refcount: 1, rpc_result = 0x0, data_buffer = 0x4520B23C, header = 0x8C884C8, data = 0x8C884E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57838, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF39, lo: 0x8C884E8 || DATA: 2C D5 00 01 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 40 0A 06 0A 15 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
Jun 21 11:19:43.727: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4528FE20, flags: 0x24100, retries: 8, seq: 0x315E1EE, refcount: 1, rpc_result = 0x0, data_buffer = 0x4520B23C, header = 0x8C884C8, data = 0x8C884E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57838, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF39, lo: 0x8C884E8 || DATA: 2C D5 00 01 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 40 0A 06 0A 15 01 04 00 00 00 87 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
Jun 21 11:19:43.727: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.727: SW1_SP: IPC: Message 4529E380 timed out waiting for Ack
Jun 21 11:19:43.727: SW1_SP: IPC: MSG: ptr: 0x4529E380, flags: 0x24100, retries: 8, seq: 0x315E1EF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50418920, header = 0x8A93DC8, data = 0x8A93DE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57839, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3A, lo: 0x8A93DE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 12 00 00 00 00 00 00 08 9E 0A 06 9A 0B 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 16 00 00
Jun 21 11:19:43.727: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4529E380, flags: 0x24100, retries: 8, seq: 0x315E1EF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50418920, header = 0x8A93DC8, data = 0x8A93DE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57839, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3A, lo: 0x8A93DE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 12 00 00 00 00 00 00 08 9E 0A 06 9A 0B 01 04 00 00 00 BC 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 16 00 00
Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.731: SW1_SP: IPC: Message 45238524 timed out waiting for Ack
Jun 21 11:19:43.731: SW1_SP: IPC: MSG: ptr: 0x45238524, flags: 0x24100, retries: 8, seq: 0x315E1F0, refcount: 1, rpc_result = 0x0, data_buffer = 0x50372694, header = 0x8468FC8, data = 0x8468FE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57840, sz: 1332, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3B, lo: 0x8468FE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 03 74 0A 06 FD 4C 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45238524, flags: 0x24100, retries: 8, seq: 0x315E1F0, refcount: 1, rpc_result = 0x0, data_buffer = 0x50372694, header = 0x8468FC8, data = 0x8468FE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57840, sz: 1332, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AF3B, lo: 0x8468FE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 03 74 0A 06 FD 4C 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.731: SW1_SP: IPC: Message 4524C89C timed out waiting for Ack
Jun 21 11:19:43.731: SW1_SP: IPC: MSG: ptr: 0x4524C89C, flags: 0x24100, retries: 6, seq: 0x315E1F1, refcount: 1, rpc_result = 0x0, data_buffer = 0x451B45EC, header = 0x894FCC8, data = 0x894FCE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57841, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFE9, lo: 0x894FCE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4524C89C, flags: 0x24100, retries: 6, seq: 0x315E1F1, refcount: 1, rpc_result = 0x0, data_buffer = 0x451B45EC, header = 0x894FCC8, data = 0x894FCE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57841, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFE9, lo: 0x894FCE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 01 00 00
Jun 21 11:19:43.731: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.731: SW1_SP: IPC: Message 45268348 timed out waiting for Ack
Jun 21 11:19:43.731: SW1_SP: IPC: MSG: ptr: 0x45268348, flags: 0x24100, retries: 6, seq: 0x315E1F2, refcount: 1, rpc_result = 0x0, data_buffer = 0x50462254, header = 0x8D4EFC8, data = 0x8D4EFE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57842, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEA, lo: 0x8D4EFE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 38 00 00 00 00 00 00 26 AB 0A 06 05 41 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 19 00 00
Jun 21 11:19:43.731: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45268348, flags: 0x24100, retries: 6, seq: 0x315E1F2, refcount: 1, rpc_result = 0x0, data_buffer = 0x50462254, header = 0x8D4EFC8, data = 0x8D4EFE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57842, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEA, lo: 0x8D4EFE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 38 00 00 00 00 00 00 26 AB 0A 06 05 41 01 04 00 00 00 86 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 19 00 00
Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.735: SW1_SP: IPC: Message 45281D58 timed out waiting for Ack
Jun 21 11:19:43.735: SW1_SP: IPC: MSG: ptr: 0x45281D58, flags: 0x24100, retries: 6, seq: 0x315E1F3, refcount: 1, rpc_result = 0x0, data_buffer = 0x45201860, header = 0x8C2CEC8, data = 0x8C2CEE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57843, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEB, lo: 0x8C2CEE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 B9 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 97 0D 01 04 00 00 00 BB 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.735: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45281D58, flags: 0x24100, retries: 6, seq: 0x315E1F3, refcount: 1, rpc_result = 0x0, data_buffer = 0x45201860, header = 0x8C2CEC8, data = 0x8C2CEE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57843, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEB, lo: 0x8C2CEE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 B9 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 97 0D 01 04 00 00 00 BB 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.735: SW1_SP: IPC: Message 504A2D18 timed out waiting for Ack
Jun 21 11:19:43.735: SW1_SP: IPC: MSG: ptr: 0x504A2D18, flags: 0x24100, retries: 6, seq: 0x315E1F4, refcount: 1, rpc_result = 0x0, data_buffer = 0x451F3A88, header = 0x8BA92C8, data = 0x8BA92E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57844, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEC, lo: 0x8BA92E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 01 48 0A 06 FD 2F 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00
Jun 21 11:19:43.735: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504A2D18, flags: 0x24100, retries: 6, seq: 0x315E1F4, refcount: 1, rpc_result = 0x0, data_buffer = 0x451F3A88, header = 0x8BA92C8, data = 0x8BA92E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57844, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFEC, lo: 0x8BA92E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 05 00 00 00 00 00 00 01 48 0A 06 FD 2F 01 04 00 00 00 DD 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00
Jun 21 11:19:43.735: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.735: SW1_SP: IPC: Message 504AA128 timed out waiting for Ack
Jun 21 11:19:43.735: SW1_SP: IPC: MSG: ptr: 0x504AA128, flags: 0x24100, retries: 6, seq: 0x315E1F5, refcount: 1, rpc_result = 0x0, data_buffer = 0x45228364, header = 0x8D9C8C8, data = 0x8D9C8E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57845, sz: 568, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFED, lo: 0x8D9C8E8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 26 00 0D 00 10 02 20 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00 00 00 00 00 02 3D 0A 06 FE 6C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 2D 00 00
Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504AA128, flags: 0x24100, retries: 6, seq: 0x315E1F5, refcount: 1, rpc_result = 0x0, data_buffer = 0x45228364, header = 0x8D9C8C8, data = 0x8D9C8E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57845, sz: 568, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56AFED, lo: 0x8D9C8E8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 26 00 0D 00 10 02 20 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00 00 00 00 00 02 3D 0A 06 FE 6C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 2D 00 00
Jun 21 11:19:43.739: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.739: SW1_SP: IPC: Message 504C15B4 timed out waiting for Ack
Jun 21 11:19:43.739: SW1_SP: IPC: MSG: ptr: 0x504C15B4, flags: 0x24100, retries: 4, seq: 0x315E1F6, refcount: 1, rpc_result = 0x0, data_buffer = 0x503C193C, header = 0x87593C8, data = 0x87593E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57846, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08B, lo: 0x87593E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 3B 00 00 00 00 00 00 10 A7 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 3B 00 00
Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504C15B4, flags: 0x24100, retries: 4, seq: 0x315E1F6, refcount: 1, rpc_result = 0x0, data_buffer = 0x503C193C, header = 0x87593C8, data = 0x87593E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57846, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08B, lo: 0x87593E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 3B 00 00 00 00 00 00 10 A7 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 3B 00 00
Jun 21 11:19:43.739: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.739: SW1_SP: IPC: Message 45273050 timed out waiting for Ack
Jun 21 11:19:43.739: SW1_SP: IPC: MSG: ptr: 0x45273050, flags: 0x24100, retries: 4, seq: 0x315E1F7, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044348C, header = 0x8C29BC8, data = 0x8C29BE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57847, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08C, lo: 0x8C29BE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00 00 00 00 00 02 24 0A 06 0C 18 01 04 00 00 00 98 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.739: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45273050, flags: 0x24100, retries: 4, seq: 0x315E1F7, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044348C, header = 0x8C29BC8, data = 0x8C29BE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57847, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08C, lo: 0x8C29BE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00 00 00 00 00 02 24 0A 06 0C 18 01 04 00 00 00 98 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.743: SW1_SP: IPC: Message 452A33E4 timed out waiting for Ack
Jun 21 11:19:43.743: SW1_SP: IPC: MSG: ptr: 0x452A33E4, flags: 0x24100, retries: 4, seq: 0x315E1F8, refcount: 1, rpc_result = 0x0, data_buffer = 0x50432830, header = 0x8B8A5C8, data = 0x8B8A5E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57848, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08D, lo: 0x8B8A5E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C4 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 A2 0B 01 04 00 00 00 C5 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.743: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452A33E4, flags: 0x24100, retries: 4, seq: 0x315E1F8, refcount: 1, rpc_result = 0x0, data_buffer = 0x50432830, header = 0x8B8A5C8, data = 0x8B8A5E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57848, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08D, lo: 0x8B8A5E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C4 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 04 24 0A 06 A2 0B 01 04 00 00 00 C5 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00
Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.743: SW1_SP: IPC: Message 4523FFA4 timed out waiting for Ack
Jun 21 11:19:43.743: SW1_SP: IPC: MSG: ptr: 0x4523FFA4, flags: 0x24100, retries: 4, seq: 0x315E1F9, refcount: 1, rpc_result = 0x0, data_buffer = 0x5036F47C, header = 0x844B3C8, data = 0x844B3E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57849, sz: 772, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08E, lo: 0x844B3E8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 F2 00 0D 00 16 02 EC 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 46 0A 06 FE 5A 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
Jun 21 11:19:43.743: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4523FFA4, flags: 0x24100, retries: 4, seq: 0x315E1F9, refcount: 1, rpc_result = 0x0, data_buffer = 0x5036F47C, header = 0x844B3C8, data = 0x844B3E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57849, sz: 772, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B08E, lo: 0x844B3E8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 02 F2 00 0D 00 16 02 EC 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 46 0A 06 FE 5A 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
Jun 21 11:19:43.743: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.743: SW1_SP: IPC: Message 45279200 timed out waiting for Ack
Jun 21 11:19:43.743: SW1_SP: IPC: MSG: ptr: 0x45279200, flags: 0x24100, retries: 2, seq: 0x315E1FA, refcount: 1, rpc_result = 0x0, data_buffer = 0x5039C3B0, header = 0x85F65C8, data = 0x85F65E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57850, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B123, lo: 0x85F65E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x45279200, flags: 0x24100, retries: 2, seq: 0x315E1FA, refcount: 1, rpc_result = 0x0, data_buffer = 0x5039C3B0, header = 0x85F65C8, data = 0x85F65E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57850, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B123, lo: 0x85F65E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
Jun 21 11:19:43.747: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.747: SW1_SP: IPC: Message 504D3544 timed out waiting for Ack
Jun 21 11:19:43.747: SW1_SP: IPC: MSG: ptr: 0x504D3544, flags: 0x24100, retries: 2, seq: 0x315E1FB, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044AE34, header = 0x8C71FC8, data = 0x8C71FE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57851, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B124, lo: 0x8C71FE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 04 48 0A 06 0B 24 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504D3544, flags: 0x24100, retries: 2, seq: 0x315E1FB, refcount: 1, rpc_result = 0x0, data_buffer = 0x5044AE34, header = 0x8C71FC8, data = 0x8C71FE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57851, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B124, lo: 0x8C71FE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00 00 00 00 00 04 48 0A 06 0B 24 01 04 00 00 00 89 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 04 00 00
Jun 21 11:19:43.747: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.747: SW1_SP: IPC: Message 504D5940 timed out waiting for Ack
Jun 21 11:19:43.747: SW1_SP: IPC: MSG: ptr: 0x504D5940, flags: 0x24100, retries: 2, seq: 0x315E1FC, refcount: 1, rpc_result = 0x0, data_buffer = 0x4521415C, header = 0x8CDD4C8, data = 0x8CDD4E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57852, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B125, lo: 0x8CDD4E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 0E 6D 0A 06 9C 5C 01 04 00 00 00 BF 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
Jun 21 11:19:43.747: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504D5940, flags: 0x24100, retries: 2, seq: 0x315E1FC, refcount: 1, rpc_result = 0x0, data_buffer = 0x4521415C, header = 0x8CDD4C8, data = 0x8CDD4E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57852, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B125, lo: 0x8CDD4E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 BE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 0E 6D 0A 06 9C 5C 01 04 00 00 00 BF 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 08 00 00
Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.751: SW1_SP: IPC: Message 452989EC timed out waiting for Ack
Jun 21 11:19:43.751: SW1_SP: IPC: MSG: ptr: 0x452989EC, flags: 0x24100, retries: 2, seq: 0x315E1FD, refcount: 1, rpc_result = 0x0, data_buffer = 0x45172660, header = 0x86DCEC8, data = 0x86DCEE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57853, sz: 1060, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B126, lo: 0x86DCEE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 3E 0A 06 FE 1D 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 BF 00 00
Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452989EC, flags: 0x24100, retries: 2, seq: 0x315E1FD, refcount: 1, rpc_result = 0x0, data_buffer = 0x45172660, header = 0x86DCEC8, data = 0x86DCEE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57853, sz: 1060, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B126, lo: 0x86DCEE8 || DATA: 2C D5 00 00 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 3E 0A 06 FE 1D 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 03 BF 00 00
Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.751: SW1_SP: IPC: Message 504C9DAC timed out waiting for Ack
Jun 21 11:19:43.751: SW1_SP: IPC: MSG: ptr: 0x504C9DAC, flags: 0x24108, retries: 0, seq: 0x315E1FE, refcount: 1, rpc_result = 0x0, data_buffer = 0x451D3748, header = 0x8A772C8, data = 0x8A772E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57854, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D4, lo: 0x8A772E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 97 00 00
Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504C9DAC, flags: 0x24108, retries: 0, seq: 0x315E1FE, refcount: 1, rpc_result = 0x0, data_buffer = 0x451D3748, header = 0x8A772C8, data = 0x8A772E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57854, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D4, lo: 0x8A772E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 CF 0A 06 01 06 01 04 00 00 00 3F 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 97 00 00
Jun 21 11:19:43.751: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.751: SW1_SP: IPC: Message 4525926C timed out waiting for Ack
Jun 21 11:19:43.751: SW1_SP: IPC: MSG: ptr: 0x4525926C, flags: 0x24108, retries: 0, seq: 0x315E1FF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50405568, header = 0x89DD1C8, data = 0x89DD1E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57855, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D5, lo: 0x89DD1E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 80 0A 06 0B 24 01 04 00 00 00 8A 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
Jun 21 11:19:43.751: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x4525926C, flags: 0x24108, retries: 0, seq: 0x315E1FF, refcount: 1, rpc_result = 0x0, data_buffer = 0x50405568, header = 0x89DD1C8, data = 0x89DD1E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57855, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D5, lo: 0x89DD1E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 88 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 06 00 00 00 00 00 00 01 80 0A 06 0B 24 01 04 00 00 00 8A 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 02 00 00
Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.755: SW1_SP: IPC: Message 452512E0 timed out waiting for Ack
Jun 21 11:19:43.755: SW1_SP: IPC: MSG: ptr: 0x452512E0, flags: 0x24108, retries: 0, seq: 0x315E200, refcount: 1, rpc_result = 0x0, data_buffer = 0x451AF00C, header = 0x891CCC8, data = 0x891CCE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57856, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D6, lo: 0x891CCE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C0 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0B 00 00 00 00 00 00 04 B2 0A 06 9E 0B 01 04 00 00 00 C3 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 17 00 00
Jun 21 11:19:43.755: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x452512E0, flags: 0x24108, retries: 0, seq: 0x315E200, refcount: 1, rpc_result = 0x0, data_buffer = 0x451AF00C, header = 0x891CCC8, data = 0x891CCE8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57856, sz: 1008, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D6, lo: 0x891CCE8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 03 E0 00 0D 00 1D 03 DA 01 04 00 00 00 C0 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0B 00 00 00 00 00 00 04 B2 0A 06 9E 0B 01 04 00 00 00 C3 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 17 00 00
Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:43.755: SW1_SP: IPC: Message 504A9C90 timed out waiting for Ack
Jun 21 11:19:43.755: SW1_SP: IPC: MSG: ptr: 0x504A9C90, flags: 0x24108, retries: 0, seq: 0x315E201, refcount: 1, rpc_result = 0x0, data_buffer = 0x45158028, header = 0x85E22C8, data = 0x85E22E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57857, sz: 736, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D7, lo: 0x85E22E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 02 D0 00 0D 00 15 02 CA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 03 4E 0A 06 FE 4C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 C2 00 00
Jun 21 11:19:43.755: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504A9C90, flags: 0x24108, retries: 0, seq: 0x315E201, refcount: 1, rpc_result = 0x0, data_buffer = 0x45158028, header = 0x85E22C8, data = 0x85E22E8 || HDR: src: 0x10000, dst: 0x315001B, index: 0, seq: 57857, sz: 736, type: 882, flags: 0x400, ext_flags: 0x0, hi: 0xA56B1D7, lo: 0x85E22E8 || DATA: 2C D5 00 02 0E 0B 00 00 00 00 00 20 00 00 02 D0 00 0D 00 15 02 CA 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 0A 00 00 00 00 00 00 03 4E 0A 06 FE 4C 01 04 00 00 00 DE 00 00 00 00 00 00 00 07 00 00 00 00 00 00 01 C2 00 00
Jun 21 11:19:43.755: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:19:52.687: %CPU_MONITOR-SW1_SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 120 seconds [21/1]
Jun 21 11:20:22.687: %CPU_MONITOR-SW1_SP-6-NOT_HEARD: CPU_MONITOR messages have not been heard for 150 seconds [21/1]
Jun 21 11:20:33.175: SW1_SP: IPC: Message 504F68E8 timed out waiting for Ack
Jun 21 11:20:33.175: SW1_SP: IPC: MSG: ptr: 0x504F68E8, flags: 0x34101, retries: 21, seq: 0x315AABD, refcount: 2, rpc_result = 0x0, data_buffer = 0x4517147C, header = 0x86D24C8, data = 0x86D24E8 || HDR: src: 0x10000, dst: 0x315000E, index: 1, seq: 43709, sz: 80, type: 1, flags: 0x1404, ext_flags: 0x0, hi: 0xA56AE85, lo: 0x86D24E8 || DATA: 00 00 00 15 00 00 00 00 00 00 07 D1 00 00 00 0A 00 00 00 0C 00 00 00 0F 00 00 00 05 00 00 00 0A 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jun 21 11:20:33.175: SW1_SP: IPC: Send failed: IPC msg timeout MSG: ptr: 0x504F68E8, flags: 0x34101, retries: 21, seq: 0x315AABD, refcount: 2, rpc_result = 0x0, data_buffer = 0x4517147C, header = 0x86D24C8, data = 0x86D24E8 || HDR: src: 0x10000, dst: 0x315000E, index: 1, seq: 43709, sz: 80, type: 1, flags: 0x1404, ext_flags: 0x0, hi: 0xA56AE85, lo: 0x86D24E8 || DATA: 00 00 00 15 00 00 00 00 00 00 07 D1 00 00 00 0A 00 00 00 0C 00 00 00 0F 00 00 00 05 00 00 00 0A 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Jun 21 11:20:33.175: SW1_SP: -Traceback= 4042B17C 404543D0 40454508 408A5DE4 4044FF98 408AAFE8 408AAFD4
Jun 21 11:20:33.179: %C6K_PROCMIB-SW1_SP-3-IPC_TRANSMIT_FAIL: Failed to send process statistics update : error code = timeout
-Traceback= 40BF9E18 40BF9E68 40BFA070 40BFA2D4 408AAFE8 408AAFD4
Jun 21 11:20:52.687: %CPU_MONITOR-SW1_SP-3-TIMED_OUT: CPU_MONITOR messages have failed, resetting system [21/1]

IMac to tv with hdmi short circuit

I have my iMac (Intel) connected to my Sony tv with an hdmi adapter. It works fine except that sometimes the iMac seems to short circuit and turn off. I read once that my cable may not be appropriate but then I lost that info. Can anyone help?

For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer. Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top.

NI 6509 court circuit

Similar Messages

Maybe you are looking for