NI 8452 How to make sure enable pull-High???

Hi,
Now, i want to code 8452 Driver, and 8452 will be a slave of I2C.
So, I want to make sure whatever pull-High is needed Pull-High or not.
Thank you very much

If you are using LabVIEW create a property node and write I2C Pullup Enable to True
Otherwise Use ni845xI2cPullupEnable to enable or disable the onboard pullup resistors for I2C operations. such as "kNi845xPullupEnable (1)" to enable the pullups
Jeff

Similar Messages

I just upgraded to the new 4, but not sure how to make sure all my apps (purchases) get over to the new phone from iphone 3. can't seem to find instructions. thanks.

I just upgraded to the new iphone 4, but am hesitant to get it plugged in b/c I don't know how to make sure all the apps purchased on my iphone 3 get to the new phone. can't seem to find instructions so I'm sure it just "does it", but hesitant to literally pull the plug. thanks.

Follow these instructions: iPhone: Transferring information from your current iPhone to a new iPhone, http://support.apple.com/kb/ht2109

HT200131 how to make sure only my laptop can connect to my apple tv?

I don't want to see my flatmate apple tv under "connect"
how to make sure I don't click on his tv accidentally and he won't be able to connect mine?
thank you!

Hey J-Justin,
Great question! You can name your Apple TV to differentiate it from others in the AirPlay list:
Apple TV: Change the name of your Apple TV - Apple Support
http://support.apple.com/en-us/HT200028
Furthermore, you can setup an onscreen code or password to restrict access for AirPlay. The password method sounds like the best option for your setup:
Apple TV (2nd and 3rd generation): Understanding AirPlay settings - Apple Support
http://support.apple.com/en-us/HT202618
Set a password
Go to Settings > AirPlay > Security > Password > [set password]. You can use this setting to require a password for AirPlay-enabled devices to connect using AirPlay on the Apple TV. Use this setting if your device will need permanent access and you only want to enter the password once.
Thanks,
Matt M.

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

How to make intellisense enable in powershell in CSOM for sharepoint online?

how to make intellisense enable in powershell in CSOM for sharepoint online?
I am loading assembly as following
[Reflection.Assembly]::LoadFrom("$scriptdir\Microsoft.SharePoint.Client.dll")
[Reflection.Assembly]::LoadFrom("$scriptdir\Microsoft.SharePoint.Client.Runtime.dll")

Hi,
try this
http://powerguivsx.codeplex.com/
http://mackenzie-sharepoint.blogspot.com/2011/12/sharepoint-2010-powershell-intellisense.html
https://technet.microsoft.com/en-us/library/ff461033.aspx
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fcb85984-abf9-428a-a2a7-952cec37ea49/powershell-ise-intellisense
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

How to make buttons enabled after the data is entered in JTextField?

I got a JTextField. I want to test the entered data in JTextField is eight length. If the data is of length eight then i want to enable two buttons. How to make it enable? I am getting the length eight, but the buttons are not enable. What listeners I have to use.
Can anybody help me out.
Thanks for your help in advanced.

Create a class that extends KeyAdapter. Add a field that is an array of buttons. Override the keyTyped(KeyEvent e) method to use getSource() to access the text area, check the length of the text, and if > 8, go through the array and enable the buttons in the array. Then, when you create the text area, create an instance of your listener, passing it an array of the two buttons you want to enable, and then use addKeyListener(yourKeyListener) to add your key listener to the text area.
Doug

How to draw a perfect circle and how to make sure it is perfectly centered inside a square

How to draw a perfect circle and how to make sure it is perfectly centered inside a square in Photoshop elements using the Ellipse option.

1. Create a square canvas.
2. With the Elipse tool, hold down Shift (Shift forces a circle). Draw the circle anywhere on the canvas (Shape 1 in this example).
3. Simplify the circle layer
4. Ctrl-click the layer to select the circle.
5. Copy the selection to the clipboard (Edit > Copy).
6. Deselect the selection.
7. Paste from the clipboard (Edit > Paste). The pasted circle (Layer 1) will be centered.
8. Delete the original circle layer.
NOTE: Step 6 is the key. This guarantees that the pasted circle will be centered.
If you want a circle completely within a square you can simply draw and simplify a circle on any shape canvas. Ctlrl-click the circle to to select it and copy to the clipboard.
Then do File > New from Clipboard. This creates the circle cropped to a square on transparent background.

I am new How to make internet enable group in my active directory 2003 ?

I am new How to make internet enable group in my active directory 2003 ?
Thanks & Regards, Amol . Amol Dhaygude

Greetings!
What is Internet Enabled Group? Would you please clarify this?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

How to make sure that schema name is not included with generated sqls

How to make sure that schema name is not included with generated sqls with tableadapter wizard.
What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
I want
"Select a,b from t1" ,not "select "a","b" from schema.t1"
Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
. I now manually edit XML files of dataset. It works but....
thanks

The full hardware :
Processor Intel core due 3.00 MHz
RAM:1.5GB
psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
HD Disk:160 GB
But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

How to make icon_checkbox enable in ALV list

Hi,
I am using the checkbox icon (icon_checkbox) to write into my ALV by using this FM REUSE_ALV_HIERSEQ_LIST_DISPLAY.
The output of the ALV will be like this:-
header-                        | Col A    | Col B      | Col C      | Col D
line item1-                     chkbox   1               456          789
line item2-                     chkbox   2               xyz          kkk
The first coloumn (Col A) is the checkbox.
I am facing problem when using icon_checkbox to display it at the ALV. Currently my checkbox is showing all check in all item and I can't check and uncheck it.
My question is:
1. Is it possible to make the checkbox enable/editable by writing the icon_checkbox?
2. How to make the checkbox enable/editable?
Thanks for your time for reading this. Let me know if more info is needed.

This can be done one of two ways:
1. Customize the form in Infopath, right click your field and disable the control.
2. Use JavaScript/jQuery on the page to disable the element.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

MacBook Pro 15" 2007 is dead. How to make sure it's the left I/O board?

My 15" 2007 MacBook Pro is now completely dead. No light on the 85W magsafe (which does work on unibody MBP 15), battery completely empty, no sign of life whatsoever. Apple Store says I need a new "logic board" but could not specify which one, main or left I/O. How can I make sure it is the left I/O board?
The computers' power circuits have been steadily declining in recent months. It has a checkered history - it's the one that ran hot, had kernel panics due to graphics card drivers, and had the graphics card hardware issue. The computer died in October 2008 and "the logic board" was replaced under Apple Care, free of charge. When AppleCare ran out I bought a unibody MPB and my son inhereted the 2007 model, using it for his music and being pretty happy with it, until the battery would not charge anymore. He then ran it on the power supply only, until it would not boot up. Apple Store did some magic with it (probably reset SMC), it ran for a while longer without charging battery, then did the same thing (not booting, but magsafe connector showing green LED). Searching on the web I found some hints as to how to reset SMC and this worked - once. Took the computer off the magsafe when going on a holiday, when I came back it had deceased.
Apple Store quoted $ 540 for a logic board replacement. The left I/O board is available online for $ 119 and I am able to mount it myself, would do so if I could make sure that this unit has failed and not the main board. And that, friends, is my question.

Let the Apple folks - or an AASP - run diagnostics on the machine. They'll be able to tell if you need a new logic board or not. Get an estimate - if it seems outrageous then it's probably time to buy a new computer.
Just my 2¢...
Clinton

How to make sure plots in xy graph are present?

Hi community,
since updating to LabVIEW 2014 this week I have an issue with code that worked previously (or didn't but the problem was unnoticable).
As shown in the example llb I created to showcase the issue, I'm filling xy graphs with quiete some data and then programatically colour the plots.
The problem is that if there are too many plots then the property nodes that are to colour the plots thow errors as if the corresponding plots were not present in the graph yet - even though I used a single frame flat sequence structure to try to make sure data is written to the plot before trying to colour them.
Maybe this would have happened in LabVIEW 2013 too - but the threshold for the number of plots was higher. All I can say is that I observed this with data sets that worked fine in LabVIEW 2013.
To reproduce simply run "colour the graphs.vi" with sufficiently high values for "numerisch" and "numerisch 2" (50 on my machine may be more on yours). I left the error out terminals of the property nodes unwired so you get taken to the right position when the error occurs.
Can I somehow check whether all plots are in the graphs yet? That way I could introduce a delay that makes sure I don't try to colour graphs that aren't there yet - regardless of the speed of the target PC.
Has xy graph behavior changed in LabVIEW 2014? Or maybe its performance?
Best regards
Florian
Solved!
Go to Solution.
Attachments:
colour.llb ‏194 KB

Florian,
i cannot run your example as it requires some VIs from a LAVA-library (which i dont have installed).
Nevertheless, there are some questions i am stumbling about:
1. Why do you use a local variable rather the terminal to pass all plots to the indicator?
2. If you place a wait function in the sequence frame which waits longer than the expected time for passing the data, does the error still occur?
3. Do you run into the error if you enable panel updates before coloring the plots in order to slow coloring down?
I can imagine that you have a race condition against the UI thread. The local variable (just like the terminal) has a buffer where the data is copied to. The UI thread will retrieve the data as soon as it is ready. I would expect the coloring to require the data be present in the UI thread already (in order to "acknowledge" the plot). So if, for any reason, the UI thread only cought 98% of all plots when you start recoloring, you race against the transfer of the last 2%.. depending on the UI thread execution speed, you can run into the error or maybe not.
That is the reason why i want you to test for waiting times or slowing down the coloring.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to make sure 2 Variables of same class do not share internal variables?

K, I am having trouble making a new instance of an object.
I have a class call File_Class that have a public static attribute call File_Name.
Now in another class, I have a linkedlist and each one of the element is supposely a File_Class object. The problem that I am having now is that whenever I create a new File_Class (File_Class New_Class = new File_Class (File_Name)), i am actually getting a reference to the old one so that anything that I change reflects on every element of my link list.
My question now is
1. how exactly do i enforce that a new instance of the object (File_Class) is created so i can make sure every element in my linked list is distinct.
2. why is this happening at all
thanks for your help in advance.
Hung-Hsun Su

Here is a simple example that i wrote just to demonstrate the point. it seems that i always get the same object no matter what. Thanks again.
Result:
AFTER 0 1 2
1 2
AFTER 1 10 20
10 20
10 20
AFTER 2 99 999
99 999
99 999
99 999
Code:
class T
          public static int A;
          public static int B;
class Test
          static T TA[] = new T[5];
          private static void Set_Value (int i, int A, int B)
                    T t1 = new T ();
                    t1.A = A;
                    t1.B = B;
                    TA[i] = t1;
          private static void Print (int i)
                    for (int k = 0; k <= i; k++)
                              System.out.println (TA[k].A + " " + TA[k].B);
          public static void main (String args[])
                    System.out.println ("AFTER 0 1 2");
                    Set_Value (0, 1, 2);
                    Print (0);
                    System.out.println ("AFTER 1 10 20");
                    Set_Value (1, 10, 20);
                    Print (1);
                    System.out.println ("AFTER 2 99 999");
                    Set_Value (2, 99, 999);
                    Print (2);
     }

How to make sure text in landscape mode appeared in portrait?, How to make sure text in landscape mode appeared in portrait?

I think a few pictures speak a thousand words. I try to get creative and design some pages in landscape mode.
This is how the TOC looks like in landscape. As you can see there is a chapter and many pages. I didn't use sections to make sure that they don't appeared as a list in TOC page.
This is how Chapter page looks like.
But when viewed in portrait mode. nothing appeared.
How shall I make sure that at least the text in chapter page goes there?
Thanks!

If I add a text box, it does not seem that inline is an option.
When I create the chapter page, the bottom part is empty, but I do not know how to add text. If I add a text box, it is not inline.
I hope to be able to add inline text which appeared at the bottom, possible?

NI 8452 How to make sure enable pull-High???

Similar Messages

Maybe you are looking for