NI 9220 not supported by scan interface

Looks like the NI 9220 is not supported by cRIO scan mode:
http://www.ni.com/white-paper/8136/en/
It's mostly a sign of inadequate communication between the hardware and software sides of my project, but this threw a major wrench in my gears recently. I wasn't anticipating any difficulties like this because it doesn't seem like a super exotic module. Anyone know if there are plans in work to have this module supported?

Hello Jose,
The latest version of NI-Indcom for DeviceNET was released in april, before LV 2012 was released. The upcoming version of the driver should support LV 2012, but until then, we advise our customers to use LV 2011 or earlier.
Best regards,
Eric M. - Application Engineering Specialist
Certified LabVIEW Architect
Certified LabWindows™/CVI Developer

Similar Messages

What is up with Apple's Network not supporting Network scanning and even Ne

Hello.
I have a HP 3210 Network printer/scanner. After upgrading from my LinkSys router to a Time Capsule I now find that my HP Network scanning capability is dead. Apple tech support has admitted that they don't support scanning nor even some network printers on the Time Capsule, airport & Airport express. Apple won't even give me enough details on the issue so I can talk intelligently with HP???
What is up with that? That is completely unacceptable. I can print to my printer, I can browse the built-in web server (and scan interestingly enough using the web server), but when you try and run the HP scanning client it indicates it can't communicate with the printer/scanner.
Any ideas out there? I'm really disappointed.
Len in Canada

What is the deal here?
Easily explained: On or about 24 July the entire discussions.apple.com web site was moved to servers running Windows Vista Enterprise OS. The site was compromised approximately 6 seconds later by a group of Romanian hackers believed to be funded by Nigerian Internet scammers who had millions of dollars in credit to play with when hundreds of thousands of victims sent them their credit card numbers to pay what they thought were nominal fees to get some of the 100,000 missing iPhones sold the first week but according to AT&T never activated. Supposedly, a malfunction in a mail router or address machine (the story varies) inadvertently sent all these phones to a mid-ranking Nigerian official who needed financial assistance with getting them out of the country.
Well, either that or the site is still controlled by Apple & has been undergoing extensive changes which, shall we say, have not yet been completely sorted out, much in the same way that Iraq has not ....

Why does New Gen sbRIO not support Scan Engine?

The 'New Gen' sbRIO's use the LX25 and LX45 FPGA and it seems that none of them support the scan engine. cRIO's that use the same FPGA do support the scan engine. Is it just a RIO driver issue? If so when will this be resolved?

Hi sachsm,
I was told initially that it is a performance issue, but after doing some extra research I have found that it cannot be the case. You are right that the cRIOs that have the LX25 and LX45 FPGAs support the scan engine, so the answer lies outside the bounds of performance requirements. I spoke with some of our more senior engineers, who believe that R&D has phased out scan engine support for the newer sbRIOs based on the majority use cases for which they are deployed. Notice on the product pages for these devices that only OEM quantities are available for purchase, meaning that most of our customers for these are companies producing many units, and who generally desire to use the FPGA interface (not the Scan Interface). Each sbRIO that currently supports the Scan Interface (older models) has a custom scan engine bitfile that is written to the FPGA, and I guess someone on the development side of things decided that it wasn't worth the effort to write scan engine bitfiles for these new models. There is no indication that these will be supported by the scan interface in the future.
cRIO, on the other hand, is intended to have custom and reconfigurable module setups, and thus will always require the scan engine for those who wish to use the real-time functionality without having to deal with the FPGA interface.
I hope that this clears up some of the confusion!
Kevin W.
Applications Engineer
National Instruments

Cisco Nexus and 10GbE Autonegotiation not supported?

Hi,
I'm currently reading through the Interfaces Config Guide for Nexus 5600 NX-OS 7.x and have found the following statement:
Autonegotiation configuration is not applicable on 10-Gigabit Ethernet ports. When autonegotiation is
configured on a 10-Gigabit port the following error message is displayed:
ERROR: Ethernet1/40: Configuration does not match the port capability
Is it true that autonegotiation is not supported for 10GbE Interfaces on Cisco Nexus? I thought autonegotation was supported by 10GbE?! So would it be best practice so set a fixed speed on all Interfaces (servers, other switches) connected to the 10GbE ports on the Nexus switches?
Thanks,
Michael

Hi Bilal,
thanks. Yes, I know that 10GbE can run over both media types, the problem here is that the documentation starts with stating that auto negotiation is not supported for 10GbE in beneral but later references only 10-GBASE-T, so I was not sure what is true - whether auto-negotiation only not works with copper or with all ports.
But I guess then it is true for all 10GbE ports, no matter what media-type. It's somewhat stange however, since I have read that auto-negotiation is generally supported for 10GbE (according to Wikipedia, at least). Maybe only Cisco doesn't supported auto-negotiation for 10GbE.
Thank you again,
Michael

I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.

I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.

Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.

Getting compilation error: java.util.Set is an interface. This interface is not supported.

Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Hello,
Generic java collections can only be handled in a very generic, weakly
typed manner.
Take a look at the
http://workshop.bea.com/xmlbeans/guide/conXMLBeansSupportBuiltInSchemaTypes.html
and also
http://workshop.bea.com/xmlbeans/guide/conJavaTypesGeneratedFromUserDerived.html
You might also ask your question to the XMLBeans newsgroup:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.xmlbeans
Regards,
Bruce
Sanjay wrote:
>
Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Scan function of HP3055 not supported in 10.6

Can someone help me in getting the scan function to work in HP 3055 laser print scan fax machine. HP did not update their driver. I hate HP and will never buy one of their machines again! Having said that, my HP 3055 has always worked well and I don't want to spend the money buying a new machine ( and when I do, it will be a Brother). Sometime in the past I updated from 10.5.8 to 10.6, found the scan function did not work , and then had to go back to 10.5.8 ( and that was a big pain in the neck, as I don't have time machine). Can someone please get me working with the latest Mac operating system. It is a real problem for me... I use Google Chrome and it does not support 10.5.8 Thank you in advance

Image Capture in its preferences has the ability to enable TWAIN which may help if the default scanning doesn't work for it.
If that doesn't work HP's 10.5 drivers are here.
If you do go back to 10.6, the drivers are here.
HP has drivers for 10.7, if you find you can survive without Rosetta, or use Snow Leopard Server in virtualization.
There are no drivers for 10.8 or 10.9 direct from HP or Apple for that printer. However some open source driver solutions* may work.
* Links to my pages may give me compensation.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Coldfusion dev installer wont work - "installer user interface mode not supported..."

i just downloaded the os x version of coldfusion 7 mx
developer edition (for the thrid time making sure the download
wasn't corrupt) and extracted the zip and launched the installer by
double-clicking it. the install screen pops up where it lets you
choose what language and i press ok. almost instantly i get an
error message to pop up that says... "Installer user interface mode
not supported. Unable to load and to prepare the installer in GUI
mode."
umm... what?!
does anyone have any idea what's going on and why the
installer is misbehaving?! thanks!
: : michael

and the answer for others stuck on this...
the problems is an installanywhere bug where if the anything
in the directory path contains special characters like "!" or "#" ,
it causes problems with the install. in my case, the directory path
had a "!" in it... hope this helps someone else out!
: : michael

Windows 8, "Installer Interface Mode Not Supported"

I am getting the "Installer UI Mode Error", "Installer User Interface Mode Not Supported"
I have tried compatibility mode, as this worked on my previous laptop Windows 7 and XP sp3, but when I "Test Program" and the InstallAnywhere Self-Extractor completes install prep. to 100%, there is no response.

Is this a very, very old program? What program?
Have you done an Internet search to see if anyone else has gotten it to install?
Have you tried running it As Administrator, in addition to the compatibility modes?
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Scanning conflict Acrobat 9 pro "Color Format Selected Not Supported"

I have had several conflicts with Adobe Acrobat 9 and my HP C5180 printer/scanner/copier. I have downloaded new drivers from HP. When I try to create a PDF from the scanner, I get this conflict warning: "Color Format Selected Not supported". So, I change the color format selections in both HP and Acrobat and I still get the warning. I must admit I haven't tried the black and white color format. But I want to scan simple color images. No luck.
Has anyone else had such a problem?

This may have nothing to do with your problem, but -- at least with Acrobat 8, there is a 100MB limit to the scanned image. Are you trying to scan something larger than that?

Interface Mapping not supported in the JPA specification?

Are there any plans to add Interface support in the JPA specification? It is not supported by JPA annotations, which seems quite disruptive to proper object oriented design. However, individual implementations of JPA seem to support this:
http://docs.jboss.org/hibernate/stable/core/reference/en/html_single/#inheritance-tableperclass
http://wiki.eclipse.org/Using_EclipseLink_JPA_Extensions_%28ELUG%29#How_to_Use_the_.40VariableOneToOne_Annotation
There is visible interest in getting this implemented at an Annotation level for Hibernate also but the developers for Hibernate point out that this isn't even in the JPA specifications.
http://opensource.atlassian.com/projects/hibernate/browse/ANN-9
https://forum.hibernate.org/viewtopic.php?f=9&t=941363&sid=4abdbc72cbf04380f4a8e2cadd7dfada&start=15
Is this being talked about/in the works for JPA? Why not include @VariableOneToOne in the spec? It would seem to be quite an essential feature for wide adoption.

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

Windows 8 FTP Folder in File Explorer - Interface Not Supported

I access my FTP site Via Windows Explorer in Windows 7 and Have tried doing the same via File Explorer in Windows 8
When I double click a File in the FTP folder, whereas in W7 It would download a copy and open the file, In W8 I receive the error Interface Not Supported.
Does anyone know of a fix for this?
Thanks in advance.
Tim

I remember seeing something similar happen in Windows Explorer on W7 after I installed Google Chrome, however this was happening right from first install on W8.
I seem to remember the solution in W7 was a registry fix but I'm not sure whether this would work in W8
Ravenstar68
Edit
Just remembered it wouldn't let you create the ftp site in W7 so was a different problem
I was waiting to see if you brought that up.
When I first made the standard ftp shortcut (the kind that opens IE), it had no association. That green bird-foot arrow icon comes from OpenWith.exe.
Double-clicking the shortcut brought up a very reduced-choice metro dialog. Those were the only choices. No OpenWith browse options there.
There wasn't even a Open With... choice in the right-click dialog.
I was curious to see what might happen if I made the wrong choice. It was very unforgiving.
No obvious way to fix it. No OpenWith right-click context menu.
I had to reassociate ftp elsewhere.
Even now that I have everything straightened out, the right-click menus don't offer OpenWith.
The left pic above shows the ordinary IE ftp shortcut. I can drag-n-drop it into Firefox and it works. But there's no OpenWith option for that.
The right pic above shows the File Explorer ftp shortcut. What in the world is that "Open folder location" option? It launches IE to my (blank) home page. Hmm?
Just thought I'd share all this with you, since you brought up initializing ftp access.
Deluxe in some ways, but pretty ragged in others.

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

NI 9220 not supported by scan interface

Similar Messages

Maybe you are looking for