NI-DAQmx 7.5 upgrade failure causes MAX seizure?

I have just attempted to upgrade my NI-DAQmx from 7.3 to 7.5 by
downloading and running the driver per the install.txt. After an
apparently successful install, MAX locks up as it is trying to
start. All I get is the splash screen. Any suggestions?

You can actually simulate 1600.
When you select to Simulate a device, expand the SCXI Chassis section
and select the chassis you will be using. In the next dialog, you'll
notice that it uses a 1600 by default for communications.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

[svn] 4950: * Fixed some junit test failures caused by revision 4939.

Revision: 4950
Author: [email protected]
Date: 2009-02-13 08:31:33 -0800 (Fri, 13 Feb 2009)
Log Message:
* Fixed some junit test failures caused by revision 4939.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
Bug fixes: SDK-19299
API Change: NO
Reviewer: Darrell
Code-level description of changes:
Modified compile() by moving check for no inputs above the call to
recompile().
Modified link() to only call FileUtil.getCanonicalPath() if the
output is not null.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19299
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java

Upgrade Failure from apex 3.0 to 3.1 on Oracle 10.2.0.3

Hi:
When I was upgrading apex from 3.0 to 3.1 on Oracle 10.2.0.3, I experienced the error below: I did use the sysdba login when I was doing the upgrade.
Thank you for your help!
...create wwv_flow_sw_binds
references flows_files.wwv_flow_file_objects$(id)
ERROR at line 7:
ORA-02270: no matching unique or primary key for this column-list
create index wwv_flow_sw_bind_idx1 on wwv_flow_sw_binds (file_id)
ERROR at line 1:
ORA-00942: table or view does not exist

Surely that's telling you something?
If you did manage to hack it, you would then have an unsupported installation of APEX.
Upgrade the DB, or upgrade to the max supported APEX version for your current database version (which I think would be 3.2.1).
Cheers
Ben

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

If i bought a macbook pro on 4 juin,can i get the upgrade of new max os lion free?

if i bought a macbook pro on 4 juin,can i get the upgrade of new max os lion free?
i buy it directly from the apple store.

Might be a discount voucher near-term, to match up with past programs. That would positively scream "epic win" in addition to being a really nice gesture by Apple. But this is an educated guess.
We still have to find out how 10.4 and 10.5 holdouts from late '06-mid '09 (and y'all know who y'all are, ladies and gents) are going to get Lion based on the only system requirement of a 64-bit CPU. I suspect a Mac Box Set refresh would be in order for this task.
Also: how would one reinstall Lion "clean" if, say, the hard disk flips out or one just doesn't want excess baggage gumming up his machine? Recovery partitions assume the worst won't happen.
Unfortunately, this also leaves the earlier '06 Macs on life support and effectively kills off all prior Macs with PowerPC chips, so to anybody with a Core Duo or G-series chip, Apple wants you upgrading hardware--NOW!
Nate

Install FormsFT Helper Failure: Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

Hi
I just install the OATS 12.4.0.2.129, no problem at all, but when I try to start recording an EBS Functional test, I'm getting this message:
Install FormsFT Helper Failure:
Cause: Dynamic enable formsFT failed, no any JRE is static or dynamic enabled.
I have JRE 1.6.0_45, Firefox 24. I have already run the OpenScript Diagnosis Tool and solve the issues listed, but still have the same problem. Can anyone help me with this?
FYI: When I start record a functional test, no EBS, but Web, I have no trouble.
Regards
Diego L

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

[svn:bz-4.0.0_fixes] 20615: fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as " className", we should filter out the special case

Revision: 20615
Revision: 20615
Author:   [email protected]
Date:     2011-03-04 12:11:09 -0800 (Fri, 04 Mar 2011)
Log Message:
fixing the regression failure caused by the nest collection level fix, an actionscript type without remote alias will resolved as ">className", we should filter out the special case
Modified Paths:
    blazeds/branches/4.0.0_fixes/modules/core/src/flex/messaging/io/amf/AmfIO.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Upgrade has caused many failures...can I do a reset to default software?

I upgraded my Galaxy III on 7/20/14 and have had many failures of the phone since then. I generally charge it every night and 3 mornings last week when I went to check my phone it was blank....like it was turned off. None of the buttons responded. I finally took the battery out and then it powered up letting me know that it was fully charged, so I know that it was not a discharged battery. It has also distorted the wallpaper picture on the lock screen. The camera failed 3 times last Saturday. I had to reboot to get the camera to work.
In the settings there is a factory data reset. What do I need to do to save all my info before I do something like that. Will doing that put the original software back on and thus solving this problem? I had no problems with my phone before the update.
thanks for any help on this...

Practically all who have Galaxy S III, the upgrade brings us problems. But from what I've researched, this problem is only Verizon because I have friends with the same phone but ATT and T-Mobile and have no problems. One year I have the Galaxy III and I have been 3 upgrade makes. Each upgrade makes the phone run slower. Call customer service and they suggested to change the device for other newest model. I think it's a ruse Verizon to sell new phones. Unfortunately we can not access the original software that was bringing the phone. When I bought worked very fast but now is a turtle. I will cancel Verizon and I'll go to another company. regarding your question, you can make a back up of your information by sending it to a Google account (g-mail) and then rescue her from there. I did it once but the phone just continued as reinstall the latest software. Luck.

PXI - DAQmx tasks will not export to MAX 5.4

I am in the process of upgrading a PXI 1050 with an 8176 to an MXI bridge. The latest headache is that the CVI program had several DAQmx (tasks) defined in MAX 3.1.1 which will not export to MAX 5.4. I have been posting these additional questions on my original thread MXI not visible in MAX. I have many tasks for installed PXI cards. I was trying to make simple tasks just defining these cards to change the errors I receive in CVI. I do not have the option to define a task for some of these cards like the 4070 DMM. I did not generate the original CVI code. I am not sure what is defined the DAQmx. Can someone provide some insight ? I have viewed the suggested videos and white paper links. They were instructive but of little help.

Unfortunately; no updates without dollars. While we all work for the same company, we must contract work between departments. There was no defect with the software as delivered. Old age crept in to the hardware. Any upgraded hardware, it turns out, requires updating of the software. The unit had operated reasonably well, until a couple years ago. An unfortunate selection of network security software caused massive headaches. The software chosen assumed a more advanced level of hardware. Mandatory installation on all network computers rendered these controller inoperable. Our local IT guys shaved down the install to minimal components but the controller lost all available ram to this software, NI-MAX requires 20 minutes to build it's database on reboot. The computer controllers struggle to function. They periodically get lost and require a reboot, causing 30 minutes or more to restart. This is driving a replacement. We decided that it would be more cost effective to move to a standard computer interface. With the MXI, we could have a much more friendly and versatile interface. The upgrade is with a different "color" of corporate money. There isn't enough funding to contract a software upgrade. It is feasible to complete the upgrade in house, once we can identify the players and their function. Second we need the necessary time and access to the equipment. I do not have the ability to expend too many extra hours at work. So it takes time. I have been able to piece together the following. In the development stage back in 2004 - 2005, the developers used both Traditional DAQ and DAQmx. They build tasks for the SCXI in CVI. They have toolboxes making calls to Traditional DAQ. Also at some point in time they must have used the option in 3.1.1 to Convert Traditional NI-DAQ(Legacy)Configuration to NI-DAQmx, which built all the extra DAQmx devices we see in the device tree in the MAX 3.1.1. So beyound the errors there appears to be a few red herrings, just for fun. So there is no tasks to convert from 3.1.1, everything is contained in the CVI code. I have to find a way to use the CVI debugger to lead me to the nested, buried code causing the errors, and simply correct them. Just for another layer of complexity, they are probably logic errors, not syntax errors, or updated code errors where the legacy code no longer functions with the updated drivers. Or, hey, it could be the beta version of NI-DAQ, because it is the only one working with Windows 7 (32).

Upgrade failure(dbua) from 8i to 10g on solaris

Hi,
current version is 8.1.7.4 and trying to upgrade to 10.2.0.1 which is already been installed.
I am running dbua from 10ghome/bin
I have changed the oracle_home to 10g also
when I am trying to install by using dbua, after clicking on the finish button
it is getting failed by throwing the error at pre upgrade step.
ORA-0178: failure in processing system parameters while upgrading
Please assist me
Regards,
RB

Hi User,
It seems to me that you just want the upgrade done as fast as you could without really putting enough thoughts and understanding of the whole upgrade process. What metalink note are you following? Did you check the "Database Upgrade Guide"?
There are two scripts to run to check all your settings before the upgrade. Please search metalink for "upgrade" procedures for the details.
The errors you are encountering are mostly caused by obsolete parameters used in 8i or new parameters in 10g not acceptable in 8i.
Please provide error log.
Regards,
ArtRed

Where is the DAQmx Task information saved in MAX

I currently had a computer crash which resulted in a complete reformat of my Windows computer system. When the system was rebuilt, the IT professionals made a backup of the reformatted drive before reformatting. Since I had a computer rebuild I now have to reconfigure DAQmx task in MAX but was wondering if there was a file (such as a task or configuration file) from the old system backup that would allow me to import the DAQmx task information in without having to reconfigure the task. The hardware on the system is unchanged. Thanks, Jeff

From Max select File>import or Export. Export will create a *.nce file that contains the MAX information you select and Import prompts you to selet the *.nce file you want.
Its a pretty good idea to save your config information frequently so that you can restore to a known good configuration if something bad happens (like a rebuild of the PC)
Jeff

How to have a runtime error or failure cause all executions to stop and cleanup

I am using batch parallel mode. It's easy enough to terminate or abort all executions from SequenceFilePostStepRuntimeError using IEngine.TerminateAll() and .AbortAll(), but I would like to be able to set an error on all my running executions and cause them to run cleanup when I encounter an error on ANY of the test socket executions.
Anyone have an example of how I might do this?
Thanks,
Jake

I did something like this for a failure handler once... and looking through my code I think the biggest headache is to realize that one execution socket has no easy way of seeing the execution references for other sockets. These things are kept by the process model's top level execution... which you also don't have a super easy time accessing without tweaking some logic in your Model file.
(1)Somehow or another you want to get access to the "TestUUTs"/"SinglePass" Fileglobals.TestSocketExecutions[] array and make use of it in your classic RuntimeError callback. The easiest solution (but not the most elegant) would be to edit your model to copy/clone the file global into someplace more convenient... ie "TestUUTs - TestSocketEntrypoint".
(2) in your error callback, handle your error as usual i.e. tell top level sequence to go to cleanup etc. but also loop through the other execution references and do some variation on GetSequenceContext() and setting Runstate.sequenceErrorCode and the rest. The example api calls below are probably overkill...
Locals.currentExeContext=Locals.currentexecution.AsExecution.GetThread(0).GetSequenceContext(0, Nothing)
Locals.currentExeContext.AsSequenceContext.SequenceErrorCode=Locals.RecievedError.Code,
Locals.currentExeContext.AsSequenceContext.SequenceErroroccurred=Locals.RecievedError.Occurred,
Locals.currentExeContext.AsSequenceContext.SequenceErrorMessage=Locals.RecievedError.Msg,
Locals.currentExeContext.AsSequenceContext.ErrorReported =True, Locals.currentExeContext.AsSequenceContext.GotoCleanup =True
I'm using "Locals.RecievedError" as my error buffer in this case because it made sense to me to modifiy the error text to include which socket actually had the error (since now it's propigated to all sockets).
Locals.RecievedError.Msg=Parameters.Step.Result.error.msg+" Occurred on Socket#"+Str(RunState.TestSockets.MyIndex)
or something like that...
Was this what you were looking for? If you're really stumped and can tell me what version of TS you're using, I'll try and extract an example from my old code that you can use, but hopefully this helps.
Cheers,
Elaine R.
www.bloomy.com

Calendar upgrade failure, how can I reset the new calendar

Upgrading to the new v4 calendar on MobileMe has been a complete failure. Currently have a ticket open with Apple support, the upgrade failed with a "catastrophic failure message", my data was not fully transferred, etc.
I need to reset the new calendar, clear it completely, then reimport data from my v3 calendar from a backup to see if it will work. Any clues? There appears to be zero data on this.
Apple you really dropped the ball on quality control on this....

Launch Photos again, but hold down the alt/options key ⌥ while double clicking the Photos icon to launch the app. This will bring up the library chooser panel. select the library that you want to migrate to Photos.
After Photos completed the conversion, open the Preferences and select the new library as the main system library on the General tab of the Preferences.
Then you can delete the other migrated Photos library.

Upgrade failure, then restore failure, error code is 1604

IOS 5.01 upgrade to IOS 5.1 failure and can't restart, then restore failure and the error code is 1604

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

NI-DAQmx 7.5 upgrade failure causes MAX seizure?

Similar Messages

Maybe you are looking for