NI-DAQmx 8.8 install failure on Vista x64

[not sure which board is for NI-DAQmx questions ...]
When installing NIDAQ880f2.exe on 64bit Vista, I get a failure:
"The NI-APAL Error Files 1.2.0f0 installation has failed with the following error.
Internal Error 2202, C:\Windows\Installer\c0702.msi, -2147287035
Continue?"
If I continue the install there are no other failures (except for the "Your install failed .." message at the end). However, when running my NI-DAQmx program I get an NI-DAQmx "internal error". The same software worked last week on a Windows XP machine (with "recent" NI-DAQmx). In both cases I'm using two *simulated 6536's.
Steve
Attachments:
niInstallError.png ‏19 KB

A few more questions:
Did you install 8.7.2 from an online download?
Yes
When you say that the install was a "failure" what exactly does that mean, and what kinds of errors did you get?
Attached are the two errors (8.8. I continued the install.
Does your NI-DAQmx program run without any errors?
Yes.
When you open up Measurement and Automation Explorer and expand the "Software" tab, do you see NI-DAQmx listed there?
Yes
When you open up Control Panel»Add/Remove Programs»National Instruments do you see NI-DAQmx listed as part of your NI software?
Yes (under Vista's Programs and Features)
Have you tried Repairing NI-DAQmx within the Add/Remove Programs?
Just now. Also two failures; screen shots attached (oops - can only attach three - error was in NI-RPC (Part 87 of 87)
Interestingly, it only tried repairing 87 "things" whereas the install installed something like 129 "things" (as in the messages like "Part 17 of 129").
Attachments:
niInstallError8.7.2.png ‏27 KB
niInstallError8.7.2-2.png ‏17 KB
niRepairError8.7.2.png ‏76 KB

Similar Messages

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

Installing Lightroom on Vista x64

I've already opened a support case about this... but I figure many of you are better than Adobe support anyways. So, here goes.
I'm trying to install Photoshop Lightroom 1.1 (the latest downloadable version) on Windows Vista Ultimate 64-bit. I've read forum posts of others working, so I have no doubt that it is compatible.
On a clean installation of Vista x64, running the MSI installer gives me an error. While the error in the dialog is long and tedious to copy, the same error is found in the LOG file after the installation rolls back.
Below is the log file:
Error 1935.An error occurred during the installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, assembly name: Microsoft.VC80.CRT,type="win32",version="8.0.50727.42",publicKeyToken="1fc8b3b9a1e18e3b", processorArchitecture="x86"
=== Logging stopped: 8/29/2007 23:36:32 ===
What should be done to resolve this? I have already ran Windows update and obtained the latest of everything.

http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
The above link will take you to all previous versions for the Mac. Download the latest one for the Lightroom version you have.

Photosmart Premium C309 can not install on a Vista x64 laptop???

Ok, here's my issue and I do hope someone can help.
I have Windows 7 on my main PC. My network is run by a Linksys WRT610N which is a dual band wireless router. The Printer is successfully installed on the router and prints just fine from my Windows 7 PC.
The problem is with a Dell Latitude D630 laptop running Vista x64. I can see the printer under network properties and the HP Network Diagnostic software sees the printer as well. Printer and laptop are connected to Wireless G under the same band.
The problem is when I go to install the driver from HP's website. The same ones that installed fine on the WIndows 7 system. Version 13.1. During the install, it scans for a Wireless device yet can't find one. It then asks for a driver (not baked into Vista, of course). It asks for the disk but I downloaded the software from HP and don't have the disk. There is no INI file in the 140+mb file from HP so I can't manually install the driver.
How do I get the HP software to recognize the printer from the laptop? Even though Windows sees it?? If I go to "add printer" in Control Panel it sees it.
Help!

It should find a driver. Run a Windows Update to get the latest drivers. If that does not work.....
You can manually add the printer, however this will only provide printing function. Scanning is done through the HP software. Try this and maybe the software will run better.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

ITunes 10 Install on Win Vista x64 Failure

Unable to install iTunes 10 on Windows Vista even after uninstalling iTunes completely.
I opened iTunes and it told me that there was a new version to download and install. So I downloaded the iTunes64Setup.exe file and executed it, making sure to run it as administrator. Long story short, the install failed with the message.
"There is a problem with this Wndows Installer Package. A program required for this install to complete could not be run. Contact your support or package vendor"
Things I have tried, all have failed.
1. Redown loading the file
2. Trying to install the 32 bit version (It says I need the 64bit version for my OS)
3. Completely uninstalling and reinstalling. http://support.apple.com/kb/ht1925
4. Turning off Anti-Virus (AVG) and trying to install
When I look at the installed programs after getting the failure message, I see that it is installing the following applications. So it's bombing out on the next step whatever that is.
Apple Application Support
Apple Mobile Device Support
Bonjour
This is what the iTunes64Setup log has to say...
=== Logging started: 10/20/2011 14:48:22 ===
Command Line:
Using single-platform PRODUCTCODE.
Product to install: {REMOVED JUST IN CASE IT's SENSITIVE INFORMATION}
Information on cabinet file 'C:\Temp\Downloads\iTunes64Setup.exe'
   Total length of cabinet file : 71256441
   Number of folders in cabinet : 1
   Number of files in cabinet   : 6
   Cabinet set ID               : 0
   Cabinet number in set        : 0
   RESERVE area in cabinet?     : no
   Chained to prev cabinet?     : no
   Chained to next cabinet?     : no
fdintCABINET_INFO
next cabinet     =
next disk        =
cabinet path     = C:\Temp\Downloads\
cabinet set ID   = 0
cabinet # in set = 0 (zero based)
fdintCOPY_FILE
file name in cabinet = iTunes64.msi
uncompressed file size = 44986368
fdintCLOSE_FILE_INFO
   file name in cabinet = iTunes64.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2323456
fdintCLOSE_FILE_INFO
   file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = AppleApplicationSupport.msi
uncompressed file size = 20311040
fdintCLOSE_FILE_INFO
   file name in cabinet = AppleApplicationSupport.msi
fdintCOPY_FILE
file name in cabinet = AppleMobileDeviceSupport64.msi
uncompressed file size = 11078656
fdintCLOSE_FILE_INFO
   file name in cabinet = AppleMobileDeviceSupport64.msi
fdintCOPY_FILE
file name in cabinet = Bonjour64.msi
uncompressed file size = 2682368
fdintCLOSE_FILE_INFO
   file name in cabinet = Bonjour64.msi
fdintCOPY_FILE
file name in cabinet = SetupAdmin.exe
uncompressed file size = 73584
fdintCLOSE_FILE_INFO
   file name in cabinet = SetupAdmin.exe
Executing: "C:\Windows\system32\msiexec.exe" /i "C:\Users\root\AppData\Local\Temp\IXP925.TMP\iTunes64.msi"
Returning: 1603
I have spent many hours scouring the internet looking for solutions to this problem without success. The information I do find seems to be several years old and all seem to be roughly the same, which is to completely uninstall iTunes and reinstall. Right now I have no functioning iTunes all so I no ability to update or sync my iPod. I'm hoping someone out there has the magic answer. Thank You.

According to Apple's iTunes 10 download page system requirements are:
Windows Software
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, or 32-bit editions of Windows 7
64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer
QuickTime 7.6.6 or later is required
200MB of available disk space
Screen reader support requires Window-Eyes 7.1.1 or later.

Install Error for Vista x64

Ever since the release of 7.5, I've been unable to update iTunes. As a result, I've been blissfully enjoying 7.4 for a while now. However, I bought an iPhone yesterday and must deal with my inability to install 7.7. In my attempts to install (both .exe and .msi files individually), I get the following error:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
A quick search for this error on Google and the Apple support forums leads me to http://support.microsoft.com/kb/315346 but it unfortunately only applies to XP/ Server 2003. I figured I should target iTunes as the problem and not Vista, as I have no trouble installing anything else at all.
I'm going crazy in frustration. I've tried everything from quiet installs to editing the .msi files through Orca. Any thoughts?

I wanna ask is it my display or something else. Im using 1366x768.
Yes it is. The system requirements are there for a reason, not just for fun. These apps all have tons of palettes and require extra space for displaying timelines, compositions and video previews and even if they could be installed with such a small screen res, working with them would be no fun at all because things would get cut off or you would be forced to shuffle palettes around all the time. You really need a qualified computer.
Mylenium

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

JRE not working in Vista x64?

I have download the latest JRE build 1.5.0.10 x64 and installed it on Vista x64. The installation was very fast and OK while I try to find the java console in the control panel but I can not find it and it was not working which launch firefox to visit some web site which required the JRE.
Anything I could do to fix this?

Disclaimer: I work for the people that make MacDrive.
MacDrive does support hardware RAID arrays. MacDrive does not (yet) support Apple RAID (software) arrays.
To the OP, are the disks that you're trying to access visible within the HighPoint array management software? If yes, are they also visible in Windows Disk Management?

Audigy 2 ZS, Vista x64: Finally got bass redirection working!

=Audigy 2 ZS, Vista x64: Finally got bass redirection working!B Hey guys,
I have hooked a Teufel Concept G to my Audigy 2 ZS. The Speakers do not have internal cross mix, so unless the sound card provides a bass signal there will be NO bass at all. This has not been a problem under linux, since it automatically configures the sound card to send out bass, but very frustrating in Windows Vista x64. GTA4 is no fun without bass ;-)
After endless searching and messing with different drivers (breaking the whole vista sound system) I coincidently got bass redirection (and CMSS2 apparently) working today.
These are the steps I took:
. Fresh install of Windows Vista x64
2. Installation of Audigy 2 drivers provided by WindowsUpdate, did not download from Creative Labs
3. Use an old CtPanel-App which actually could activate bass redirection and CMSS2?
I uploaded the App:?
http://www.megaupload.com/?d=L6J0ZJVA
If you start the App it will take ages until it pops up, but then it works just fine. Feedback appreciated!
regards
Tiedemate?

I also have the same problem, sound stop working after getting SP2, I updated vista to SP2 because I want to update to windows 7, with win 7 I have try all the drivers without success I still have no sound and with some drivers I get a blue screen. After 2 restarts windows 7 ask me to fix the problem with restore and vola everything works ok but no sound.
I am trying this:
http://forums.creative.com/showthread.php?=35324

Vista x64 Acrobat window won't maximize or restore properly

I have tried a couple times to run Windows Vista Ultimate x64, but there have been enough problems that I've decided to go back to 32-bit. One of these problems is with Acrobat 8.1.2 Pro.
Whenever I open a PDF in Acrobat, if the window opens fully maximized and I try to restore it to a smaller window, the PDF document does not resize accordingly. It is still zoomed in to the same size as when it was maximized and as a result, I can't see the scroll bar because it's off the window. If I open the PDF in a window that is a smaller restored window and then maximize it, the PDF document again does not resize and remains the same small size that it was in the restored window with the scroll bar in the middle of the now maximized window with just a bunch of useless gray area where the document should have expanded to. The same problem occurs when the window is manually resized as well.
The only workaround I've found is to close the document and reopen it so that the window starts off either maximized, restored, or the new size that you changed it to. This is a real pain, especially when you're in the middle of doing something in the middle of the document.

So I narrowed the problem down to Logitech's SetPoint software. I started from a clean install of Windows Vista x64, installed Acrobat first, and tested it after installing each driver or program. The problem started after installing SetPoint and would stop after closing it. I also found a post on Logitech's forum describing the problem with screen shots: http://forums.logitech.com/logitech/board/message?board.id=software_mice&message.id=10402 . So I thought I'd found the source of the problem, until I had my computer completely up and running except for the SetPoint software and discovered Acrobat was having the same problem! I have basically every program that I use regularly installed, so it won't be as easy to narrow it down this time. I tried stopping services and testing Acrobat with them stopped, but never got the problem to go away. Hopefully a solution will be found soon.

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

Daqmx 9.02 on windows vista x64

I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.

Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz

Adobe Reader V9.0 will not install on Windows Vista Ultimate SP1

I have Windows Vista Ultimate Build 6001 and tried to install adobe reader V9.0. The download was fine but when I run the program (AdbeRdr90_en_US.exe) it returns the error:
"NOSSO (R) has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available
Close program"
So I guess my questions are
1. Is there a version of adobe reader that will install on windows vista ultimate SP1?
or
2. Is there another pdf reader that will work with Vista Ultimate SP1?
Thanks for any and all assistance!!
Mark

I am getting the exact same error:
I have a brand new HP xw8600 systems with 64 bit Vista Ultimate installed.
Via google I found a suggestion to turn on user account control.
I went to control panel > User Account > Turn User Account Control
checked the box and restarted the system. I ran the install as the administrator. It was a minor improvement. Instead of the error coming up immediately like it was, I got the OS confirmation asking if I wanted to install the program. I got the failure right have selecting "yes"
Running out of clues... any help?

Failed to install CS3 on Vista - Component Install Failed

I am unable to install Adobe Creative Suite 3 Design Standard on Windows Vista 32-bit OS.
Short version:
When I insert the installation CD and go to auto play, it says that Adobe Acrobat 8 Professional is all ready installed and greys it out, making it impossible to select as a choice. Funny thing is, Adobe Acrobat 8 shouldn't be installed - more details on that debacle below. Then when I try to install the rest, Shared Components installs successfully but the rest of the programs (Photoshop, Illustrator, Indesign, Version Cue) don't and cite "Component install failed".
The Beginning:
This all started with the pesky "Licensing for this product has stopped working" etc. So I went and tried all the solutions Adobe provided about FlexNet. Those didn't work. So I sucked it up and went to uninstall and install.
When I went to install, things seemed to be fine, shared components were installed and it started installing InDesign. Then, my computer decided to randomly shut down during Adobe installation.
Upon restart, I tried installing again and got the Component install failed error messages for everything but Shared Components. So then I tried going to Add/Remove programs to uninstall Creative Suite.
That seemed to remove everything except Acrobat 8. The add/remove window did not list Acrobat 8 as an option to uninstall. So I went to Adobe's solution about how to uninstall Acrobat 8. Ran the C5 Cleaner Tool. Then went to cmd to del AcroIEHelper, Acro PDF, pdfshell etc. Was told "Access denied". So then I went to manually delete from Program Files, took ownership of what files I could and deleted everything except Acrobat\Resource\CMap. These files appear to be read-only. Attempting to delete says "You need permission to perform this action. Try again".
I attempted to install ignoring that there's little pieces of Acrobat 8 still on the computer. Again, got component install failed.
I think the problem is that I can't clean up the last remnants of the previous install of CS 3, which Adobe lists as a potential cause for the Component install failure.
All ready tried solutions:
C5 Cleaner
Safe Mode
Programs to delete files : Eraser, CCleaner
Disabling permissions (still get "you need permission)
What else can I try to fix this?
Thank you!
[email protected]

Thank you Bob. Good to know. I'm getting a tech guy to come in tomorrow to take a stab at it. If he finds anything, I will update this post in case it helps out others in similar cases.

Toolbox won't install on Vista x64 with HP Business Inkjet 1100

To install my HP 1100 on Vista x64, I was redirected to the only compatible driver which was for the HP 1000. The printer works, but has lost some of it's features such as double sided printing and the Toolbox to monitor ink levels. A search of the forums suggested installing OJProK550_Toolbox_en.exe, but after installing that I can't get it to function because it states the driver hasn't been installed. What driver? I'm confused since I have the functional driver for this printer installed and even reinstalled through New Drivers to be sure I had the latest. I suspect the conflict and failure has something to do with this optional driver I had to use.
Can anyone offer some suggestions please? I hate to wait until my ink cartridges are empty before finding I need one (it usually happens on a weekeng!)
Interestingly, I "scabbed" this printer to my laptop running XP x32 and from there I can do doublesided printing, but cannot access the toolbox either.

Hello, have you tried using the PCL 5 UPD? In my experience, PCL 5 runs better and is not glitchy which seems what was going on before you uninstalled it. Also, how do you have the IP addresses setup for your home network?

NI-DAQmx 8.8 install failure on Vista x64

Similar Messages

Maybe you are looking for