NI Data Acquisition stuff for sale on Ebay

I'm sorry if this offends any of the loyal readers of this group, but I
didn't know where else to post this type of message.
I have a NI DAQ-1200 for sale,
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=142689200
And also a 6810 serial data analyzer;
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=142692934
Thanks
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

BEFORE you erase your iPhone 4, turn off FaceTime, iMessage & delete the iCloud account. After doing that, then erase the phone. If you fail to do so, your phone's IMEI number will still be associated with these services, even after you erase.

Similar Messages

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

Seeing rebuilt/refurbished iPhone 4s for sale on ebay. Tempting.

Seeing rebuilt/refurbished iPhone 4s for sale on ebay. Tempting. Anyone know any reason not to get one from ebay? Thanks, Nancy

1) Could be stolen.
2) Could be a scam and you'll get nothing at all; that happens on occasion even though eBay claims to provide protection against such issues.
3) Could be locked to a carrier and hacked to unlock it, which will void all support and probably would be relocked at the next OS update
4) Any "refurbished" iPhone is done by some unknown entity - only Apple can sell factory-refurbished products and they don't sell refurbished iPhones - so what was done during this "refurbishment" is completely unknown.
5) There is no guarantee that the iPhone was originally sold in your country, and an iPhone that came from elsewhere will get no support from Apple except in that country (if any would be possible after a "refurbishment" at all); you'd have to find the country yourself and send it there should any service be necessary.
Need more?
It's really a risk to buy an iPhone (or any smartphone) from an unknown and unauthorized source. I strongly suggest you either buy from someone you know, or buy from an authorized iPhone outlet.
Regards.

Ho do i prepare my Motorola Droid for sale on eBay?

Just got my iPhone 4 today and plan on selling my Droid on ebay. What do I need to do to prep it for sale? I want to make sure all my personal info is off of it as well as make sure when they activate it it doesn't interrupt cell service on my iPhone.
Thanks in advance!

Make sure everything you want is backed up from your sd card, go into Settings- SD Card & Phone Storage. Hit unmount SD card and Format SD Card when it shows up. Then mount the sd card back. To clear off the phone, go to settings-privacy and choose Factory Data reset. That should clear everything off.

Data transfer files for Sales Invoices (A/R Invoices)

Hi,
I want Data Transfer Sheets for A/R Invoices in Sales module, Can you provide me?
Thanks,
Surendra.

Hi Fidel,
I have checked that path.
The below mension templetes are available in that path
C:\Program Files\SAP\SAP Business One\Data Transfer Workbench\Templates\Templates\
oSalesForecast, oSalesOpportunities, oSalesPersons, oSalesStages, oSalesTaxAuthorities, oSalesTaxAuthoritiesTypes, oSalesTaxCodes, oSalesTaxInvoice, & etc
No templates for Sales Invoice. I saw oInvoices template, it will usefull for Sales invoices, can you check it & confirm me please?
Path: C:\Documents and Settings\Noni SAP4\Desktop\ZSL\Templates\Templates\oInvoices
Thanks,
Surendra.

Turning on cam so I can take pics of stuff for sale

does anyone know how I can take pics so people can see what I got for sale thanks I am on PC Mac G5

by the way my pc Mac G 5 is not a intel sorry

ACI - Date Range issue for Sales Details report

I am working on ACI setup for one of my client. I set everything us as per documentation.
This is regarding ‘Sales Details’ (Public Folders > ATG > Commerce > Sales > All Sales) report.
Report is being generated if I select ‘Date Range’ under ‘Time Period’; but if I select ‘Predefined’ I get below errors:
RQP-DEF-0177
An error occurred while performing operation 'sqlPrepareWithOptions' status='-9'.
UDA-SQL-0107 A general exception has occurred during the operation "prepare".ORA-32035: unreferenced query name defined in WITH clause RSV-SRV-0042 Trace back:RSReportService.cpp(758): QFException: CCL_CAUGHT: RSReportService::process()RSReportServiceMethod.cpp(239): QFException: CCL_RETHROW: RSReportServiceMethod::process(): promptPagingForward_RequestRSASyncExecutionThread.cpp(774): QFException: RSASyncExecutionThread::checkExceptionRSASyncExecutionThread.cpp(211): QFException: CCL_CAUGHT: RSASyncExecutionThread::run(): promptPagingForward_RequestRSASyncExecutionThread.cpp(824): QFException: CCL_RETHROW: RSASyncExecutionThread::processCommand(): promptPagingForward_RequestExecution/RSRenderExecution.cpp(593):
Has anybody come across this issue?
Any help in this regard will be highly appreciated.
Thanks,
Mukesh

Contact Oracle support. I think we've seen this one before if using a particular version of Oracle(11.1?). There's a particular version of Oracle that doesn't support queries in a WITH clause that aren't referenced in the main query. Cognos seems to generate these types of queries not knowing that the version of Oracle doesn't support it. According or Support Article ID 1063400.1 you can patch this particular problem with Oracle or you can upgrade to Oracle 11.2. I also think that was a to get Cognos to generate an alternative query that doesn't use the WITH clause at all. Something about disabling the use of WITH in all queries by making a change to the report definition or alternatively a global change to the metadata model.
Good luck...
Andrew

Fixed Date and Quantity for Sales order

We have Requested Delivery Date in our order entry page in CRM ISA. This date is transferred fine to R/3 with the sales order.
We want to flag the "Fixed Date and Quantity" field in schedule lines of the order in R/3 when the order is replicated to R/3.
We also want to restrict the order specific to particular organization for which the fixed date and quantity is flagged when the
order is replicated
Any ideas on how to achieve this?

thanks Rajesh..But I would like to do in a sales order without doing going to any other transaction. Can I assume that this is a gap and we need to code in user exit to trigger 413 movement type.
points are rewarded.
regards,

Logic boards for sale on ebay, anybody tried them?

So Apple does not want to fix our faulty macbook pros (which don't qualify for the nvidia timed bomb), and I'm not going to pay thousands just to get that peace of junk work again and sell it for half that price!
I, however, did some search on ebay and found so many logic boards that could replace my faulty one, the sellers claim it's all new and are authentic, but how come they got it in the first place!?! anyone had a successful experience with one of those sellers?
Otherwise should I send my Pro to the states to get the logic board replaced for free since the local apple retailer says it's not included... bla bla... so does it work that way? please help

Boomer, thanks for your reply. The reason why I am asking is that I read somebody's story on this forum that lives in chile or colombia or something, and his local apple retailer told him they can't replace the board in which nvidia's issue is not involved... then he called apple of the US and complained, then they told him they'd fix it for free if he lived in the states or at least send them the laptop... which he couldn't do. So I thought that would work for me, hopefully?
About ebay's sellers, here are some of my findings:
http://cgi.ebay.com/Macbook-PRO-A1229-17-2-4GHz-T7700-Logic-Board-661-4364-/3004 96904049?pt=LHDefaultDomain_0&hash=item45f702df71#ht_500wt922
http://cgi.ebay.com/661-4959-Apple-Macbook-Pro-17-A1229-2-6Ghz-Logic-Board-/1404 75035384?pt=AppleLaptops&hash=item20b4f6eef8#ht_669wt1139
http://cgi.ebay.com/Macbook-Pro-17-2-4GHz-Logic-Board-Santa-Rosa-A1229-/25071814 6653?pt=UKComputing_Apple_MacAccessories&hash=item3a5ff7505d
there are many others... what do you think?

Data Acquisition Solution for Measurement of Temp,V,I,P,Q,PF,f

Dear All,
I am facing one problem in selecting the Hardware,can anybody support me,
This is regarding DAQ Solution(cFP) for Measurement of Temperature,Voltage,Current,Active Power,Reactive Power,Power Factor and Frequency for a Motor.
Requirement is that, Measurement and Monitoring of Temperature,Voltage,Current,Active Power,Reactive Power,Power Factor and Frequency for a Motor
1)12 RTD Inputs(PT 100 Sensors)
2)3 Current(From 3 CT's) ,3 Voltage(From 3 PT's) [From these 6 Parameters,Active Power,Reactive Power,Power Factor,Frequency we have to derive ]
Hardware which i have selected is attached,please find the attachment..
RTD Module which i have selelcted is ok,but i have one doubt in AI Module Selection,
I selected AI 100 Module(8 Channel(Both V,I).12 bit,360 S/s[in this i have one doubt,i.e.360 Samples that to per channel or 360 Samples per 8 channels?) for taking 3 Voltage Signals from PT's and 3 Current Signals from CT's)
If we install and take signals from Motor,in reality harmonics(Max if we consider 8th Harmonic Components [8*50=400 Hz will be signal Freq]) will come into picture,
For finding frequency(From V,I wave shapes),atleast (5 Fs i.e.5*400=2kS/s i have to take right,correct me sir if i am wrong..)
Why we want this system is,currently,we are using Yokogava Power Analyzer for finding Voltage,Current,Active Power,Reactive Power,Power Factor and Frequency,But RTD it cant..,So we need total System with RTD SIgnals and above parameters to be monitored in a host PC without any Power Analyzer,i.e.our measurement system should be independent of Yokogava Power Analyzer.Again one problem is that Yokogava is giving Accuracy 0.02% in the measurement of Power and what about the accuracy of our system and for this,which Module shall i go for?)
Regards,
Bujjin
Attachments:
cFP System Configuration.JPG ‏141 KB

Hi wayne.C,
Thank you very much for your reply,
Actually Interfacing the instrument for Power and remaining using Compact DAQ is also one more solution as u told,
but problem here is that,we are always dependent on the instruemnt.So i am looking for common Hardware platform
which will server both the purposes,and obviously,i will go for cRIO Solution,as sampling rate will be higher,
Thanks and regards,
Bujjin

Data source Enhancement for Sales Item

Dear SDN Mates,
We are enhancing the data source 2LIS_11_VAITM, when i try to enchance extraction structure it is not allowing to enhance. Showing a message :"2LIS_11_VAITM does not allow enhancing or append structure"
Mates if you came across these difficulties please let me know and suggest any ideas.
Thanks and Regards
Arun S

Hi,
Have a look at these links:
[SAP BW Data Source Enhancement|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16]
[Data Source Enhancement|Data source Enhancement Code Samples;
Hope it helps...
Regards,
Ashish
Edited by: Ashish Tewari on May 11, 2009 12:16 PM

For Sale: SCXI-1124 Never Used - Please Read...

I am a regular lurker, and am a regular LabVIEW 8.5 user. I realize that my post-less count is probably alarming and may be passed off as a troll or SPAM, but I assure you this is not the case. I won't give you a sob story about my life or why I need to sell this module, but I want to make it clear that I have only the purest intentions.
I have a new in box (opened static bag to verify contents) SCXI-1124 DAC Module that I must sell. We had a client pull their design out at the last minute - and of course it was a rush...at least initially. We purchased new components, many of which are NI parts. While we gladly use the other stuff, we have no use for 1124. As a small company (my wife and I...), one rather large purchase cannot be written off so soon and we must recoup our expenses to pay some rather large outstanding hospital expenses, even if it means taking a loss.
We paid the full $1599 and are asking $650 OBO. Please write to envisionelec_at_woh.rr.com or respond to this message if interested. We accept Paypal, Check, Money Order. It is also for sale on EBay 320271675869.
Thank you and Best Regards.

Sorry to hear you're having such a bad time, don't know if this is of use to you but others have been reporting 'issues' with BT's tracking of their BB usage here.
A lot of providers (not all though) do throttle P2P because from an IP point of view it isn't time critical. What they mean is, if you throttle VOIP traffic you get a jittery call, same with video etc. When downloading files you don't tend to get these issues (although it's really irritating for the person downloading). If you use UTorrent then you can switch on encryption which has been reported to help some people (as BT's systems can't inspect the packet payload to make a yay/nae decision on throttling).
Some throttling is based on ports and/or destination IP though, so the above may not help. May be worth a try in the meantime.
As far as call centers go, I've found that if I begin the conversation with "Can I speak to a call centre in the UK please?" a lot of operators will put me through to someone a bit more helpful. Not had to call in a while though so this may have changed.
As far as recordings of calls goes, you may be out of luck there. Not all call centres record all calls AFAIK and there's a specific exception under the DPA so you can't request a copy of any recordings without getting a subpoena from a court. I'm not a lawyer, but I do have some experience of dealing with issues like this (Tiscali FWIW).
I've seldom had issues with BT's support, once I've got passed the first line droids that is, but then I've never had a problem with explaining to someone exactly why they are proceeding down the wrong route (doesn't earn me many friends there though!)
Hoping some of this may help a little, though can appreciate some of it probably isn't what you wanted to hear.
http://www.bentasker.co.uk
One Server to rule them all,
One Ping to Find Them,
One LAN to bring them all,
And in the darkness BIND them.
The Tolkien Ring Network

Mac Se for sale

I have an original, approximately 1987 Macintosh SE. I am looking for price quotes because my mom wants to sell it. As I said, I am pretty sure it is from 1987. It comes with all install disks, including Oscar the grouch, Star Trek, and the equivalent of ms word (I forget what it's called), the original keyboard and mouse, (both of which work perfectly).
My question is, what can I expect for this machine to sell for. It is in excellent condition and has much of the original software and all of the original hardware in working/new condition.

There were 3 SE models made. See the specs at http://www.everymac.com/systems/apple/mac_classic/index.html
Suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap After you join, post a FS (For Sale).
You might also post your question at this forum http://68kmla.org/forums/
There's a few for sale on eBay. Here's one that has some bids.
http://cgi.ebay.com/Vintage-SE-30-Most-Powerful-Compact-B-W-Mac-Ever-/1705716338 07?pt=LHDefaultDomain0&hash=item27b6dc948f
 Cheers, Tom

Data source creation for service contract configuration

Hello all,
I have to create a data source for extraction of service contract configuration. I think this could work like data source creation for sales order creation, but I don't know waht to enter in transaction CTBW. Anyone here has done this previously? Any pointers and/or the strategy you've used will be useful.
Kind regards,
Simon

Hi,
If you are asking about "CRM sales contracts", The following help gives the info about standard ODS and Datasource.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d5/9fcd3b869e7d72e10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Prepping a computer for sale

I am readying a Dual G5 for sale on eBay.
What is the best way to securely erase the hard drive so an identity theif cannot mine it for files?
I performed a clean install of the original OS from the install discs. I chose Erase and Install from the options.
Is that good enough? Does it completely erase all traces of previous files?

Here's my method.
This is the way I prepare old machines that came with OS X installed, which allows them to act just like one from the factory. First, boot with the Apple Hardware Test disk that came with the machine, run the extended tests, and make sure everything passes. Then, boot with the restore disk that came with the machine, erase and zero the HD (as discussed in those articles). When that's finished, reformat it Mac OS Extended, install the OS 9 drivers (if the machine can boot into OS 9), and then restore the software.
When finished, click on the restart button, holding down the CMD+S keys. This puts the machine into single-user mode and gives you an Unix command line terminal screen. When the text stops scrolling, type in this command and click the return key:
shutdown -h now
This shuts down the computer; the next time it is turned on, the Setup Assistant will appear and the new user will get to personalize it. This also alleviates the necessity of presetting any display parameters, internet and e-mail settings, etc. As long as the monitor can hook up to the machine, the OS will select a usable resolution and the user can use the Display prefpane to suit their needs. They'll also have to run Software Update and bring everything up to the latest version.
G4 450 MP Gigabit Mac OS X (10.4.7)

NI Data Acquisition stuff for sale on Ebay

Similar Messages

Maybe you are looking for