NI Measurement Suit for Mobile/Fixed WiMAX 1.0 , is there any optiion to enable PUSC or AMC for the generated signal?

Hi.
I am using a NI VST to generate WiMAX signal. I have installed NI Measurement Suit for Mobile/Fixed WiMAX 1.0 on the compute. But I can't find any option on the front pannel of the generation suit to enable AMC or PUSC for generated signal. Does such feauture exist at all?
Thanks.
Solved!
Go to Solution.

Hello sam2013ni,
This is all that I am seeing for AMC and PUSC. Look in 'Zone Type'.
Best regards,
K. Anderson
Applications Engineer
National Instruments

Similar Messages

HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.

I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.

No.
You must restore.

Wait for the digital signal

Is there like "wait for the panel activity" in digital signal, "wait for the digital signal goes up" etc. ?
Or is it bad to make it with sequence structure and inside of first sequence use while loop?

If you need to wait for a digital signal before continuing on with your program, the best way is to have a while loop that continuously reads the signal and stops the loop when the signal goes high. You can put this loop in the first frame of a sequence, or you can wire an output from the loop (like error out from the device read vi) into your next step. Be sure to put a delay (100mSec) in your loop so that the loop does not hog CPU time.
- tbob
Inventor of the WORM Global

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!, Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it!

Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it! Does it at home and work so not either broadband connection

jp270759 wrote:
Hi. MAny thanks for the answer. Am new to Apple - what's the "real" MacBook Pro forum?
I would like to know also!
For your issue - Solution may be found if you search in the "More Like This" section over in the right column.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

PC Suite for the iphone

Is there anything like a "PC Suite" (Nokia) for the iphone which will allow typing text msg's on the PC ??? I chekced the internet and found some doubtful chinese software for it ! Isn't there anything from apple ???

There is no such app without jailbreaking.

Day and Month date format - Calculating a measure only for the last day date format

Good evening all,
I'm really struggling with a MDX query and so would greatly appreciate your help ..
Here is a simplified representation of my data:
Id
Tenor
VarX
1
10-Jan-14
10
2
10-Jan-14
10
3
10-Jan-14
10
4
11-Jan-14
10
5
12-Jan-14
10
6
13-Jan-14
10
7
Feb-14
10
8
Mar-14
10
9
Apr-14
10
And here is the MDX result I’m trying to get:
Tenor
VarX
VarY
10-Jan-14
30
0
11-Jan-14
10
0
12-Jan-14
10
0
13-Jan-14
10
90
Feb-14
10
0
Mar-14
10
0
Apr-14
10
0
Where: if tenor is the last tenor in day format (i.e. dd-mmm-yy) VarY = total sum of VarX else VarY = 0
Here is a first try below which hopefully will help you understand my problem.
MEMBER [Measures].[VarY] AS
IIF (
ISEMPTY([Measures].[VarX])
OR vbamdx!Len([Tenor].CURRENTMEMBER.Name) <= 6
OR TAIL(
FILTER(
{[Tenor].[ALL].CHILDREN},
NOT (ISEMPTY([Measures].[VarX])) AND vbamdx!Len([Tenor].CURRENTMEMBER.Name) > 6
).ITEM(0).Name <> [Tenor].CURRENTMEMBER.Name,
NULL,
SUM ( [Tenor Group].[Tenor Group].[all], [Measures].[Delta] ) )
Please let me know if you have any ideas and/or advice.
Thanks in advance! Kevin

Hey Aleksandr
Tenor is a string. The tenor table is used by other reports too and contains tenors in day, month, etc format (e.g. 01-Jan-14, 02-Jan-14, 03-Jan-14, ..., Jan-14, Feb-14, ...).
This is why I was trying to differentiate the 2 "groups" of tenor using length.
Something like:
MEMBER [MEASURES].[MOUT] AS
iif(
isempty([Measures].[VarX]),
null,
iif(
(Len([Tenor].CURRENTMEMBER.NEXTMEMBER.Name) =
Len([Tenor].CURRENTMEMBER.Name)
null,
SUM ( [Tenor].[all], [Measures].[VarX])))

Adobe Creative Suite 5 Web Premium Student and Teacher - Is there any chance to get a CC discount?

Hi there.
I'm currently a user of Adobe Creative Suite 5 Web Premium which I bought when I was eligible for Student&Teacher version. I'm not a student, neither a teacher anymore. Is there any chance to get a discount for Creative Cloud?
I thought I would be able to get a discount due to the fact I have previous version of Adobe software, but it seems that it is not for people who bought S&T versions.

Hi,
first of all look at your "Help" on top, where you could go to this:
http://www.adobe.com/ap/support/contact/ ("Need a different country or region?" = Asia Pacific - English) or
http://www.adobe.com/support/service/
Also what concerns the service from ADOBE support I personally made very good experiences with the telephone hotline.
All other product help
800-833-6687
Monday-Friday, 5am-7pm PST
And particularly well I found that Adobe now also offers the chat. All I can give you this link:
http://kb2.adobe.com/cps/403/kb403784.html#Free Support
To 1.: Did you read Adobe's terms and conditions? If so, the question should answer itself. Student version prohibit commercial work, I could read it in a former thread, an academic version would allow it and come with full upgrade rights. (You could use search function here on top.)
To 2.: Since I have no experience, I would even here use Adobe's or Google's search function.
To 3. Yes.
Hans-G.

TLS cipher suites: Is there any Windows application that is using one of the two NULL cipher suites?

My question is about these two standard cipher suites from Windows 7/8 (and Windows Servers):
TLS_RSA_WITH_NULL_SHA256
TLS_RSA_WITH_NULL_SHA
Question: Is there any native Windows 7 application/process that must use one of these two ciphers?
If not, I would simply kick them out to make sure that they are never used.
Bonus question: Is there any reason to keep these on any Windows Server?

Thank you for your response. I kicked out the NULL ciphers and everything weaker than 3DES. Consequently I also deactivated SSLv3 on five windows clients (computers and not servers, no server admin here). Rearranged the order of preference according to
my needs. So far I don't experience any issues. Did the same with JRE many years ago (just kicked it out), now I lean back and enjoy the show.

Signal to noise ration for the attached signal

Hi every body
any one can help me to find the signal to noise ratio of the attached signal, and how to convert it to frequency domain. I know it is easy but it is not working with me since the power must have a main amplitude at the fundemental frequeny which is 1Hz and I cann't find any component there.
any help is appreciated
qqa
Attachments:
SNR.vi ‏15 KB

ejkaiser wrote:
billko wrote:
ejkaiser wrote:
The SNR is defined as the ratio of signal power / noise power. So if you have an FFT you must decide which part of the spectrum is your signal. Then you can sum up the signal part of the spectrum giving you the signal power and the sum of the rest of the spectrum gives the noise power.
Cheers
Edgar
It sounds so easy - all you have to do is separate the signal from the noise, measure both, then take the ratio... Of course, if we could do that, we wouldn't have to worry about SNR in the first place!
Well Billko,
what is your message then?
This is exactly the procedure and LV provides the tools to do it. But as always: first one needs to understand the task, then the tools. We have to worry about SNR because it inevitably spoils the signal, not because it couldn't be measured.
Cheers
Edgar
The point was to show that it is very easy to go down the wrong path if you have no guidance. For instance, the OP painted themselves into a corner by believing that they needed to separate the signal from the noise to measure each, but you explained the real world, correct way to do it. I was just pointing out the subtle flaw in the logic that if we could separate the signal from the noise, we wouldn't need to measure the noise because it would be irrelevant.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How to specify file names for the generated code in wscompile

Hi,
We want to follow a certain file naming conventions for the artifacts generated by wscompile.
How is it possible to set the name for the service interface file, service implementation file etc....
This is possible in AXIS ant task Wsdl2Java. How do we do it for wscompile.
thanx

Thanks Chris and c. Under Description I'm presented with three Names for the profile: ASCII, UniCode and Mac Script. ASCII and Mac Script are the same name for the profile, with nothing being in the UniCode Name box. Which do I change -- both?
Am I going to screw things up in Photoshop if I change these names to something I can comprehend? Looks like I may just have to make a sticky-note list of the cryptic profile names with my own descriptive name as a reference. Thanks.

Best Anti-Virus/Firewall/Spam Software Suite for the Mac

What are the alternatives to Intego's Internet Security Barrier dual protection software suite?

I have to agree with all that has been said. Also - we have found Net Barrier - current version - is worthless - no longer a functional working product. Completely worthless on Leopard 10.5.5.
Nothing is usefully functional in Leopard - Cookie Filters - Banner Filters - nothing works any more. Hasn't for a long time actually. Waste of time to try an install this product.
Recently loaded it on a fresh 10.5.5 build - worthless effort.
The interface is worthless in my opinion - childish and frustrating.
Virus Barrier - works - Updater is very troublesome. Fails often. And... frankly - a waste of time - just gets in the way!
Intego Support - non-existent. Unless you count the one time they responded four weeks after a support request was made. Worthless effort! Intego needs to concentrate on their Windows product.
Now - one product that has always worked for us - never let us down - Little Snitch! Highly recommended!!!! Perfect Watch Dog! Grrrrrrr!
Mac Scan - also seems to be coming right along - but - the scans are just always a waste of time. Nothing is ever there! Updates regularly! Adds maybe one item! It was free recently or I would not have it installed! It's just amusing to watch!
As the one commentator said - responsible use and operation is always the best! Always!
The only Mac infection seen by us to date - the user invited it in the front door and made it comfortable and welcome. Very Dumb! Why sure - here is my admin password too!
Enough Said!

Looking for assistance in developing a magazine with 117 pages - iPad App with Adobe digital Publishing suite for the iStore

We are looking for some help in developing and App, so that we can publish our current hard-copy magazine with 117 pages onto the iStore any suggestions?

as bob said, it depends what kind of assistance.
which language is needed, are you able to spend money on it, when is the deadline.
do you need technic support, design help? do you have a license for dps, which one?
ect.
if you need a professional, experienced team our company could help you. but we will not work for free

Why does Apple not offer Logic Pro X as an extra when you buy a 13" MacBook Pro online? Is Logic not suited for the 13"?

Hi Guys,
Is there a reason that Apple does not offer Logic Pro X as an extra when buying the MacBook Pro 13" online?
I understand that the screen is probably a bit small, but I need the portability (recording in studio/gigs etc), and will be plugging it into a bigger monitor when I am working at home.
I cannot afford the 15", and an iMac is not an option, due to portability.
Also, for music production (audio tracks and midi, with plugins), would you guys recommend I upgrade to the 2.9Ghz i7 and 8bg RAM?
Thanks!

http://www.apple.com/logic-pro/ has a "Buy Now" in blue to add it to your store cart.
http://www.apple.com/logic-pro/specs/ explains the specs.

My iPhone 5 has damaged, it is out of warranty,by plug in other iphone 5 charger it became warm and shut off, Now aim in Estonia here is no place to replacement service for out of warranty. Can anybody hep me to how to fix my iPhone? Is there any mail add

hi any body please help me

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

NI Measurement Suit for Mobile/Fixed WiMAX 1.0 , is there any optiion to enable PUSC or AMC for the generated signal?

Similar Messages

Maybe you are looking for