請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2
NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版,不適用。
找了許久都沒看到有1.1.2。
舊的正版軟體不會放在網站上,請洽業務部
Similar Messages
-
Ecxel and Report Generation for Microsoft Office
Hi,
I'm trying to do move measurement data to a predefined Excel template. I
need to put data into same template from different measurements into
different places of the template. If the template (and Ecxel) is closed
accidentally outside LabView 7.0 it creates troubles. (Next time Excel do
not open correctly etc.) Is there any way to detect when Ecxel is closed
outside LV. Any other good ideas to prevent Excel to crash or other
solutions.
Thanks in advance EJUnless you must have Excel visible for some reason, the best approach is to make Excel invisible when you open the application. Feed the Excel application object into a property node and set property "visible" to false. Then the only way for a user to close Excel is to end the process in the Windows Task Manager.
Dave.
==============================================
David Kaufman
LabVIEW Certified Developer
============================================== -
How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office
I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreetHi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi 23 KB -
LabVIEW Report Generation Toolkit for Microsoft Office
Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
StefanHi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel -
I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason PhillipsLookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls 120 KB
eb_rain_gauge_ss.csv 23 KB
EastBankHourlyRainReport.xls 28 KB -
National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.
The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htmIt is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.
-
LabVIEW Report Generation Toolkit for Microsoft Office 1.1.2
Where is possible to buy LabVIEW Report Generation Toolkit for Microsoft Office v1.1.2?
Thanks.
FranciscoYou are right, the page does not say that but the local distributor says that I have to purchase an update to the latest version of LabView: about USD 1000. I can't believe that.
-
Add Report Generation toolkit for Microsoft Office in exe
Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi 132 KB
Untitled Project 1.zip 3841 KBHi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG 92 KB -
I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit? -
Control checkbox form field in word with report generation toolkit for Microsoft office
Hi all,
Happy New Year!
I insert in the word template the check box form field. It has a bookmark name "Check1".
Now I'm trying to checked or unchecked this field using the report generation toolkit for Microsoft office and I couldn't. If anyone now how to do it? I'm using LabView 8.0
Thanks in advance,
Boris
Solved!
Go to Solution.Boris,
The Microsoft Office Toolkit does not have support for checking/unchecking check box forum field. You would have to research the activex functionality that enables this to be checked or unchecked and then do the activex calls yourself. I did hear of one csutomer who used a special font to write a blank box or a checkbox into a word document and changed it that way as well.
Maybe http://www.ozgrid.com/forum/showthread.php?t=53715 gives a hint to an activex reference
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video -
In the very near future we will be forced to upgrade to Office 2010 Company wide and I am a little concerned with some of our older test platforms that have applications built in LabView 8.2.1. These applications save data to MS-ACCESS 2000 databases using the LabView database connectivity toolkit 1.0.1. Office 2003 is also loaded on these test platforms with all test reports generated using the LabView report generation toolkit for Office 1.1.3.
I have not gotten my hands on a copy of Office 2010 yet to see if there will be any compatibility issues. Does anyone have any experience in this area?The MS-Access part is fairly well isolated through the ADO interface LabVIEW uses. The only possible problems there IMHO are difficulties with possible Acess compatibilities itself such as an example, SQL statement you may have invoked directly through the ADO interface. Maybe you did use a depreciated command back then that has since been removed. As long as the only thing you do are simple INSERT and SELECT statements only, I would expect it to just keep working.
The Report Generation interface is a different beast. Microsoft manages to change the Automation interface with every version of office in a way that strongly binding applications like LabVIEW break on. There is no good way around that except not changing those methods, but that is a cause that has been lost already. You will certainly have to verify the version dependant Report Generation API VIs to still work with Office 2010 and most likely you will have to make some changes to those VIs to make them work again with the modified ActiveX interface of Office 2010. Note, that I have no experience with porting report generation to Office 2010 but I have had some headaches from porting that between Office 97, 2000, 2003, and 2007.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Hi all,
I am having trouble locating a LabVIEW Toolkit. Could somebody please send me a link to somewhere where I can download the eval version of the Report Generator Toolkit for Microsoft Office for LabVIEW 2013 64bit.?
Thank you in advance,
BobYes here is the 2013 version.
http://download.ni.com/evaluation/labview/ekit/other/downloader/2013RGT_downloader.exe
And here is the 2014 version.
http://ftp.ni.com/evaluation/labview/ekit/other/downloader/2014RGT_downloader.exe
I believe both are for 32 bit LabVIEW, which works in both 32 bit and 64 bit Windows. Honestly until all toolkits support 64 bit Windows, I still don't see much of a reason to go with 64 bit LabVIEW. The support is just better with 32 bit.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
I have a Microsoft Word template I want to populate programmatically with test data. The template contains both explanatory text and a data sheet section with test data placeholders (bookmarks). Using the Report Generation Toolkit for Microsoft Office, I have been able to successfully populate the placeholders with data and save the results into a new Microsoft Word document. The problem is the new Word document contains not only the test data but also the explanatory text that was in the original document template. Ideally, I would like to have the generated document contain just the test data without the accompanying text. Is it possible to do this usi
ng the Report Generation Toolkit?Hello Ryan,
Two easy options come to mind.
1. You may want to consider using an �ink annotation� instead of regular text for your explanation.
2. You can programmatically do a find and replace on the explanatory text. Have LabVIEW find the whole paragraph, and replace it with nothing.
If none of these suggestions help, or if I�m not correctly understanding your issue, please reply with comments or answers to the discussion above and any additional information that may help, and I�ll be happy to look further into it.
Have a nice day!
Robert Mortensen
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments -
안녕하십니까? 대전 이엘케이(주)의 박창규입니다.
현재 Labview를 사용해서 엑셀데이터를 리딩 => 데이터 분석 및 요약, 그래프 삽입, 기타 => 원하는 template로 저장
하는 프로그램을 작성하려고 하고 있습니다.
이렇게 프로그램하기 위해서는 전용 툴킷(Microsoft Office용 NI LabVIEW Report Generation Toolkit)이 필요한 건가요?
현재 30일 평가버전인 2011버전을 사용하고 있습니다.
관련한 예제 나 설명자료등이 있으시면 도움도 함께 부탁 드립니다.
감사합니다.
박창규 드림. -
LabVIEW Report Generation Toolkit in the application does not work
I have LabVIEW7.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1, which was updated after installed. I made a VI in LabVIEW7.1 enviroment using the Report Generation Toolkit and it works very well. After the VI was build an application.exe and installed even in the same PC, the Report Generation Toolkit didn't work. Excel that should pops-up does not do anything.
the office i used is office xp. would you like to help me?
thank you very much.
JingWhen you build the application, you have to include as "Dynamic vi" in Source file tab the vi:
_Word Dynamic VIs.vi. from _wordsub.llb
_Excel Dynamic vis.vi from -Excelsub.llb
in the following library
...\National Instruments\LabVIEW 7.1\vi.lib\addons\_office\"
Refer to the following discussion thread
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000053460000&ECategory=LabVIEW.LabVIEW+General
Maybe you are looking for
-
How do I install Lightroom on my new macbook that doesnt have a disc slot?
How do I install Lightroom on my macbook that doesnt have the disc slot? I have the disc copy of lightroom 2 and Im not sure how to install it
-
Id like to know if i connect an av digital adaptor to my hd tv from my ipad can i watch online movies on movies streaming sites?
-
Mac book pro or windows..please help me.....
Ok so I have a mac mini-.i wanna get a mac book pro-im gonna get the 7200 rpm drive..2gb ram.everything good with it as you vcan probably terll money is not an issue-but I c that the mac book pro only has a 2.16ghz processor-..now ive looked at windo
-
I am trying to execute the second example in tutorial of wireless toolkit. My application fails after executing hc.getLength(). This command returns value as "-1". Why this happens and whats the reason for httpconnection to return length of content a
-
Manipulating data between 2 tables
Hi Everyone, Scenario: Having two tables displayed and being able to add a row of data from table 'A' to table 'B' and also be able to remove a row of data from table 'B'. (similar to out of the box UME functionality in adding/removing roles to a us