Ni-Pal service Manager hat ein Problem festgestellt und muß beendet werden

Die Meldung "Ni-Pal service Manager hat ein Problem festgestellt und muß beendet werden" wird jedesmal wenn ich den Computer starte angezeigt. Das nervt. Weiß jemand Abhilfe?

Hallo!
Der NI-PAL service manager wird am Anfang immer gestartet und ist dafür verantwortlich, dass die entsprechenden DLLs in den Speicher geladen werden. Wenn bei Ihnen jetzt ein Fehler auftritt dann sollten Sie herausfinden welche DLL den Fehler verursacht. Wenn der Fehler auftritt haben Sie die Möglichkeit diese Informationen aufzurufen. (For more information about this error, please click here), danach öffnet sich ein Fenster in dem Sie den Namen der DLL finden.
Die DLL sollte dann deinstalliert und nachher nochmals installiert werden, wird die DLL nicht mehr benötigt kann Sie auch uninstalliert bleiben.
Dieser Fehler wird meistens durch eine fehlerhafte Installation verursacht und kann durch die Reinstallation behoben werden. Nach der Installation Rechner neu starten damit der Speicher neu geladen wird.
Viel Erfolg und ich hoffe ich liege richtig!
LG, Günther Prossinger

Similar Messages

Photoshop Elements 9 Organizer hat ein Problem festgestellt und muss beendet werden.

Mit dieser Popup Meldung verabschiedet sich mein neu installiertes Pse9.
Eine Neuinstallation half nicht weiter.
Weitere Informationen zum Fehler:
AppName: photoshopelementsorganizer.exe AppVer: 9.0.3.0 ModName: pclempegbox.ax
ModVer: 4.0.8.0 Offset: 00020c3e
Um Hilfe bin ich sehr dankbar.
:-) Jürg

Hallo!
Der NI-PAL service manager wird am Anfang immer gestartet und ist dafür verantwortlich, dass die entsprechenden DLLs in den Speicher geladen werden. Wenn bei Ihnen jetzt ein Fehler auftritt dann sollten Sie herausfinden welche DLL den Fehler verursacht. Wenn der Fehler auftritt haben Sie die Möglichkeit diese Informationen aufzurufen. (For more information about this error, please click here), danach öffnet sich ein Fenster in dem Sie den Namen der DLL finden.
Die DLL sollte dann deinstalliert und nachher nochmals installiert werden, wird die DLL nicht mehr benötigt kann Sie auch uninstalliert bleiben.
Dieser Fehler wird meistens durch eine fehlerhafte Installation verursacht und kann durch die Reinstallation behoben werden. Nach der Installation Rechner neu starten damit der Speicher neu geladen wird.
Viel Erfolg und ich hoffe ich liege richtig!
LG, Günther Prossinger

NI-Motion, 7344, NI-PAL Service Manager Problem

We have a 7344 motion card installed in a PC. The error started
to happen after we had a power failure. When the PC starts up the
following message is displayed: "NI-PAL Service Manager encountered a
problem and needed to close" The Error signature is: szAppName:
nipalsm.exe, szAppVer: 2.1.0.49152, sz ModName: NIMCInit.dll,
szModVer:7.2.1.3003 offset: 0001cfac.
More Details:
We have two 7344 motion cards: 1 and 2 and two computers A and B.
Both motion cards were installed in PC A when we had the power
failure. We can install card 2 into either PC A or PC B and not
encounter the error. We install card 1 into PC A and we have the
problem. When card 1 is installed into PC B the problem does not
occure.
What should we do?
Pat Pointer ([email protected])

Pat,
this is really weird behavior. Most likely the issue is caused by a harddrive problem on PC A which might be resolved by following these steps.
Run CHKDSK /F from the Windows recovery console
Uninstall NI-Motion and remove the 7344 boards.
Install NI-Motion 7.4 which is the latest NI-Motion version
Install the 7344 boards in your PC.
I hope that helps,
Jochen Klier
National Instruments Germany

'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

Hello,
Any idea how to fix this problem that casuses this error?
'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day. This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
'' Problem sending commands to the program"
Thank you
Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
Yesterday I started having this error message pop up when I first boot up my computer. I haven’t even started LabVIEW.
Recent changes:
6Jan08 Replaced motherboard and CPU.
6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition). Computer working fine.
8Jan08 Installed LabVIEW 8.0 Student Edition. LV is working fine and the message does not appear.
9Jan08 Download and install NiDAQ 8.6.1. Reboot the system and the above error shows up. LabVIEW works fine so far.
Anybody have any ideas on what the problem is? I have a screen shot of the actual message, but I can't load it on this page.
Oliver
[email protected]

NIMCInit.dll NI-PAL Service Manager Error

Hello all,
I'm getting the attached NI-PAL Service Manager error every time I start my computer. I've tried solution given in this post: http://forums.ni.com/ni/board/message?board.id=240&message.id=4362 thread with no luck.
If I uninstall the NI-Motion drivers, or remove my PXI-7350 from the PXI chassis, the error goes away. After I re-install the NI-Motion drivers and re-start the computer, the problem occurs as soon as the "Found New Hardware" wizard completes, and on every boot thereafter.
Any pointers to what I should try next would be helpful.
OS & Driver Versions:
Windows XP SP2 Version 2002
NI Measurement & Automation Explorer 4.4
NI Motion Assistant 2.2
NI-488.2 2.5
NI-CAN 2.5.2
NI-DAQmx 8.7
NI-FGEN 2.5.1
NI-Motion 7.6
NI-VISA 4.2
Hardware:
PXI-1042 Chassis
PXI-8187 Controller
PXI-7350 (Slot 2)
PXI-2566 (Slot 3)
PXI-8464 (Slot 4)
PXI-6254 (Slot 5)
PXI-6602 (Slot 7)
PXI-5402 (Slot 8)
Attachments:
NI-PAL Error2.png ‏19 KB

Hi Mark,
Make sure that when you uninstall everything you also
1. Uninstall MAX
2. Delete the MAX data folder (this doesn't uninstall when you uninstall).
On Windows XP and Windows 2000:
Navigate to C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data\
The folder named Application Data is a hidden folder. You can view hidden folders by selecing Tools » Folder Options..., click the View tab, and selecting Show hidden files and folders.
Note: Remember that deleting the Data folder in its entirety
will remove all configuration settings. The next time MAX is launched,
you will have to configure all of your hardware again.
Thanks,

Web services manager control login problem

hi,
I have installed SOA suite using Advanced installation type.
After installation I am able to login into BPEL Console and it's working fine , but unable to login into web services manager control(http://localhost:8888/ccore) with oc4jadmin user...
I found below errors in ccore.log file
2008-10-03 09:33:45,879 INFO [AJPRequestHandler-HTTPThreadGroup-54] userregistry.UsersTable - isValidUserPassword() failed for oc4jadmin
2008-10-03 09:33:45,879 INFO [AJPRequestHandler-HTTPThreadGroup-54] sampledb.LocalDBAuthProvider - The error in authenticate for user : oc4jadmin
2008-10-03 09:33:45,879 SEVERE [AJPRequestHandler-HTTPThreadGroup-54] uibeans.LoginBean - Error when authenticating user. Invalid user id or password
2008-10-03 10:17:30,744 SEVERE [AJPRequestHandler-HTTPThreadGroup-54] userregistry.UsersTable - isActiveUser() failed for oc4jadmin
com.cfluent.utils.db.DBException: ORA-01017: invalid username/password; logon denied
     at com.cfluent.utils.db.DBContext.getConnection(DBContext.java:95)
     at com.cfluent.db.userregistry.UsersTable.isActiveUser(UsersTable.java:2599)
     at com.cfluent.db.userregistry.UsersTable.isValidUserPassword(UsersTable.java:2996)
     at com.cfluent.accessprovider.sampledb.LocalDBAuthProvider.authenticate(LocalDBAuthProvider.java:61)
     at com.cfluent.access.AccessSessionFactory.isAuthenticated(AccessSessionFactory.java:137)
     at com.cfluent.access.AccessSessionFactory.createSession(AccessSessionFactory.java:92)
     at com.cfluent.webui.uibeans.LoginBean.authenticateUser(LoginBean.java:31)
     at com.cfluent._coresv._Login._jspService(_Login.java:354)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.i18n.servlet.filter.ServletFilter.doFilter(ServletFilter.java:130)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
     at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:48)
     at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
     at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:771)
     at org.apache.commons.dbcp.PoolingDriver.connect(PoolingDriver.java:175)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.cfluent.utils.db.DBContext.getConnection(DBContext.java:86) ...
can any one help me resolve this problem..

You need to enable JSSO if you want the oc4jadmin password to be in scync with the other AS products. If you just want to login with oc4jadmin you perform the following steps. PLease note that if you change the passord in EM you will have to make these changes again to keep the password the same. JSSO is a cleaner solution.
To change the default password for the user "admin", follow these steps:
- delete admin user
- add admin user back
- add admin user to the super user group "su1-grp"
1. Go to OC4J_HOME/owsm/bin directory and modify manageUserGroups.properties
user_id=admin
user_name=admin user
user_password=yourNewPassword
user_email=[email protected]
group_id=su1-grp
group_desc=super user group
2. Delete the existing admin user by executing
wsmadmin manageUserGroups deleteUser
4. Add the admin user again by executing
wsmadmin.bat manageUserGroups addUser
5. Add admin user to super user group
wsmadmin.bat manageUserGroups addUserGroup
The admin user password is changed.

NI-PAL Service Manager Error Message

Hello Fellow LabVIEW users
I am getting error message everytime I switch on my computer as shown in the attached image file.
1) what is the NI-PAL? I could not find any help topics related to it.
2) Why is this error message shown? Could it be because I changed the PCI port for my GPIB card?
3) How do I overcome this issue? Is it a major problem?
Thanks
mhaque
Attachments:
error message.JPG ‏44 KB

Mhaque,
May be the following link help for u..
http://forums.ni.com/t5/LabVIEW/NI-PAL-service-manager-generate-an-error-at-the-startup-of-the/td-p/...
Siva
Sivaraj M.S
CLD

NI-PAL Service Manager problem at startup of PC

I have been using the same version of LabVIEW (8.6) in the same computer with the same DAQ (PCI-6221) and the same OS (Windows XP Pro SP2) for a couple months but since a couple days ago, at startup I get a message saying that NI-PAL encountered an error and needs to close. When I click on "View more" it says that the problem is in szAppName: nimxs.exe szAppVer: 2.1.0.49152 szMonName: nipalut.dll szModVer: 1.5342.3.0 offset 00001204, and then, when I open an .exe built from a VI file, I get the error -2147220712, saying that such error occurred at DAQmx Create Channel (AI-Voltage-Basic) .vi: 4 and (AO-Voltage-Basic) .vi: 1(two different pop ups) and that there is no description of the error.
To my knowledge no one have added/modified/deleted any component or module.
Attachments:
Error.jpg ‏218 KB
20130918_110647CROP.jpg ‏287 KB

Hi EIEN1,
This problem is due to a corruption in DAQmx. A DAQmx reinstall should solve the problem. If it persists you should try erasing Max Database:
http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
I hope this information is useful,
Cheers!
José Alberto G.
National Instruments
ELP Support Engineer
www.ni.com/soporte

NI-PAL Service Manager has encountered a problem and needs to close

Hello,
I am getting this error after a few hours of running a Labview 7.1 program installed on an XP machine. A reboot and start up of the program seems to go as expected but after the error will pop up again after a few hours.The program appears to still run normally and you can interact with the interface.
The following information was listed:
szAppName:nimxs.exe szAppVersion: 2.1.1.49152 szModName: nismslu.dll
szModVer: 1.4.0.49152 offset: 00003eb7
What does this mean and will I have to reinstall Labview or could it be a WinXP problem?
Thanks,
Mike Cotharin

Hi,
Could you please tell me if you are using MAX (measurement and automation explorer)? This looks like a data base corruption.
Regards,
Miguel Fonseca
Applications Engineer
National Instruments

NI Pal Service Manager memory error on pc startup

Hello,
I have two XP-pc's with NI-488.2 (ver. 2.30) and MAX (ver. 4.0.0.3010) installed.
Both pc's give on startup an nipalsm.exe memory error (see attachment).
When starting MAX, (if no error) no installed hardware is shown.
On both pc's also McAfee Virusscan 8.00 is running.
What does nipalsm.exe (internal) that can cause this error ?
With thanks,
best regards,
Geert
Message Edited by GeertVN on 11-03-2005 12:55 AM
Attachments:
nipalsm error on pc loading.jpg ‏25 KB
nipalsm.exe info.gif ‏34 KB

Hi,
I have some suggestions for you:
Try the latest driver, version 2.4:
http://digital.ni.com/softlib.nsf/websearch/1DDE5C48F30C2C658625702000681295?opendocument&node=132060_US
---> Don't install the new driver over the other one. First remove the old one.
Are you testing the same GPIB card in both PCs? If yes, does the error occur without any cards plugged-in?
Try a Repair of MAX in Add/Remove programs
Make sure that you install first the driver without the card plugged-in.
Check if no firewall is blocking the nipalsm.exe. Maybe you can check if the error occurs when you have no McAfee software installed. (I don't think that the problem is caused by the MCAfee soft but I haven't tested it yet with the latest version)
Regards.
JV

Problem in Service Manager

Hi,
I m using SAP 2007 B. SAP is working fine only problem which i have is when is open service manager suite by clicking on the icon the service dropdown list is blank and all options are disbale. But my license manager is set as automatic in the services and application. How to bring these services in the list..?
Swapnil

Hi Swapnil,
If you are using OS Windows Vista, before installing the Server Tools please check whether UAC (User
Account Control) is Set off. You can set it off from Control Panel=>User Account=>User Account Control. Please also deactivate "Data Execution Prevention" as per the attached note [1179514|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1179514].
Please also go through SAP Note [1253820|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1253820] describing a similar issue.
hope it helps,
Regards,
Ladislav

JCAPS UDDI - Problem Using the Web Service Management Application

Hi everyone, this is my problem:
1.) I installed the JCAPS UDDI Server in a Solaris. <-- Ok
2.) In the eManager I installed the Web Services Access Manager. <-- Ok
3.) I started the UDDI server. <-- Ok
4.) I check that the process is running (in Solaris). <-- Ok
5.) I'm trying to load the Web Service Management Application Login Page, but it doesn't show the page so I can't login and in consequence I can't publish, remove, view, and search WSDLs by using the Web Service Management Application.
I appreciate some help about this.
Regards

Yes, I am connecting to the same system where we have data..
Anirban

Problema con Service Manager

Hola Expertos
Tengo un detalle con el Service Manager, en primera instancia los botones de los servicios de resaldos y el mailer no se habilitan.
Lo que hice y me funiono adecuadamente es reinstalar el Server Tools y nuevamtne los botones de los servicios estaban habilitados para ejecutar los servicios.
El problema es el siguiente, CADA QUE RE-INICIO EL SERVIDOR por x motivos, los servicios se vuelve a desabilitar quedan los botones en color gris. y nuvemente se tiene que hacer la re-intalacion del Server Tools.
Esto le ha ocurrido a alguien mas?, tienen alguna idea de que es lo que puede estar ocurriendo?
Ojala puedan ayudarme
Reciban un Saludo.
Yen

Hola de nuevo...
Bueno como ya comentó Mary Merecías, debes habilitar el usuario administrador en el equipo.
Tu administrador de RED y de Dominio debe poderte ayudar con el inconveniente (si tienen departamento de sistemas mejor aún para que te puedan otorgar la contraseña de Administrador de Windows en caso que la tenga).
Para saber si tienes el usuario administrador haz la sigiuente prueba: Busca un programa que quieras instalar, y si al momento de darle doble clic te aparece primero una pantalla pequeña diciendo "El siguiente programa esta intentando instalarse en el equipo, quiere instalarlo?..." y te da la opción de aceptar y comienza la instalación entonces NO estas con el administrador principal.
Cuando estas con el administrador principal, no te solicita que confirmes la instalación de los programas que quieras instalar.
Tambien puedes buscar información referente en Google colocando: "Entrar en Windows 7 con usuario administrador"
Saludos

How can I escalate terrible FIOS service problems above FIOS field service management?

This is a long story, but I will try to keep it short and on point. We use Verizon FIOS for land line telephone, Internet access and TV cable. For the past four and a half months, we have suffered serveral outages a week and sometimes several outages in a single day on all three services. Sometimes we lose our Internet connection for a few moments. Sometimes telephone calls get dropped or there is no dial tone. Sometimes we see pixelation or interference in the cable TV signal.
Often two services are affected at the same time. We've recorded events where all three services were affected at one time.
In the Gateway router logs, we see errors messages that "opaque does not match!" and "rebinding lease." These messages in the router logs occur at the same time stamps when we suffer dropped calls or cable TV interference. It seem obvious, at least to me, that the problem is external to anything that is inside of our house.
We have opened a dozen or more support tickets. We've had four Verizon field technicians come to our house. We've gone through three Verizon Gateway routers.. We've accessed the Internet using only wireless connections of a week to try and rule out internal wiring problems with computer access to the Internet.
Verizon has replaced the ONT (optical network terminal) on the side of our house. They changed the fibre channel cable that goes from the ONT to a vault out by the curb of the street.
We have opened a formal complaint with the FCC and with the PA Public Utility Commission. But the problem has not been resolved. We think that we're just getting the run around now from Verizon field service. Yesterday, a service manager left me a voicemail where he suggested that our Internet problem was caused by a second router that we had hooked up to the Verizon router. We DO NOT have a second router. He said that there was a problem with cable TV interference in my area and 2nd level support was working on it. He did not address the dropped landline calls. He did not address why outages on more than one service would occur at the same time.
Does anyone have any advice on how I get our problem escalated? We are at the end of our rope here and are considering canceling our service with Verizon and going with a competitor. But even after all of this, we are hesitant to switch providers because we will lose our email accounts that we've used for well over a decade.

Hi wepeccant,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Hallo zusammen, habe folgendes Problem. Nutze PSE 11 und habe mir eine neue Cam gekauft Nikon D610... Wie kann ich den RAW Konverter auf diese Cam updaten? Vielleicht hat einer von euch ja einen Tipp. Schon einmal danke im Voraus. Gruß Mark

Hallo zusammen, habe folgendes Problem. Nutze PSE 11 und habe mir eine neue Cam gekauft Nikon D610... Wie kann ich den RAW Konverter auf diese Cam updaten? Vielleicht hat einer von euch ja einen Tipp. Schon einmal danke im Voraus. Gruß Mark

Da gibt's nix upzudaten. Die Kamera wird nun mal erstz ab ACR 8.3 und somit Elements 12/13 unterstützt, also müßtest du das ganze Programm kostenpflichtig updaten. Ansonsten eben mit dem DNG-Konverter durchwurschteln...
Mylenium

Ni-Pal service Manager hat ein Problem festgestellt und muß beendet werden

Similar Messages

Maybe you are looking for