NI PCI 6225: How to start and stop an acquisition using triggers

Hi,
Hi already spent two days reading the previous post on start/stop trigger and end up with just a complet breakdown....
I'm using a NI PCI 6225 for a project on brain activity.
I want to start the aquisition of 10 channels at 1Khz on a first trigger (i.e. portline 0) and stop it on a second trigger (i.e. portline 1). The duration of the recording should not exceed 5min.
Any help will really be apreciated as well as some explanations. I'm not an expert but I do can understand if I'm being explained...slowly. I hope this post will not contribute additionally to the/my confusion on this topic....
Thanks for your attention and help,
OD

Hi,
Unfortunately, it is not possible to stop the acquisition with a second trigger (just start the task). There are some approaches to what you need, but not exactly the same. Please take a look to the next example.
http://zone.ni.com/devzone/cda/epd/p/id/5028
I think the only way to perform what you need will be by software and with all the consideration about timing that you should already know.
Regards,
Richard.

Similar Messages

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

I am having data i want to measure pulse width without using hardware and tell me how to start and stop soft timer using labview

soft pulse width measurement

If you are creating a pulse in software somehow, then you can use Pulse Measurements.vi that's on the Analyze>Waveform Measurements palette. This will require that the input is of the waveform data type with signal and timing information. There's several timing functions on the time & Dialog palette that you could probably use. Check out Tick Count and Elapsed Time. If you could provide more details on what exactly you need to do, we could provide more help.

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

How to Start and Stop Processes?

How to Start and Stop Processes?
Im trying to create a program which allows me to Start and Stop (and Restart) GameServers. I will then expand on this so i can start and stop them through a web applet with build in useraccounts.
Currently the way we do this is to log into the server using a RemoteAssistance. Which is not very safe as the users have the abbility to do anything on the server and potentially corrupt it.
Below is my code for how i start the servers. But i dont know how i would stop the process.
                private void startServers()
               for(GameServer gs : servers)
                    int ID = Integer.parseInt(gs.getID());
                    if(isChecked(ID))
                         try
                              String cmd[] = gs.getStartString();
                              Runtime.getRuntime().exec(cmd);
                              int sleepPeriod = Integer.parseInt(sleepField.getText());
                              Thread.sleep(sleepPeriod*100);
                         catch(Exception e)
                         System.out.println(e);
               }//end of iterator
               JOptionPane.showMessageDialog(null,"All Selected Servers Have been started.","Servers Started",2);
     }//end of startserversAnyhelp would be great thanks.

Using the process class would give you a nicer API, but using destroy isn't a nice way to shutdown a process. Its like killing the process with your task manager. You should make a connection in some way with the game server and tell it to shutdown in stead (gracefull termination).

How to Start and Stop the SAP System

Hi,
I have installed "Sneak Preview"; Searched for start and stop scripts but there are more than one script which has named start.bat and stop.bat. Moreover, I searched the documents which comes with Sneak Preview but could find useful instruction there either.
Question: Could you please point me to the documentation where it explains the starting and stopping SAP, for Sneak Preview?
Thanks in advance
Jawad Kakar

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

How to start and stop VIO cluster

How to start and stop VIO cluster
How to extend/modify the VIO cluster once created from webclient
Thanks,
Venkat

VIO 1.0 GA version has the UI to start/stop the cluster

How to start and finish a transaction using EJB 3.0 in JDeveloper

Hello everybody!
Does anybody can explain how to start and finish a transaction using EJB 3.0. I need to start a transaction insert some information in some tables and if everything was fine commit the information.
I put the annotation @TransactionManagement(TransactionManagementType.BEAN) in my session bean and @Resource SessionContext ejbContext; but I don't what anything else I have to do.
Any help will be appreciate.

I tryied to use in the client the statement EntityTransaction transaction = myBean.getTransact(); but I receive the EJBException: Cannot use resource level transactions with a container managed EntityManager
I just need to start a transaction something like this: transaction.begin(); and finish the transaction, something like this: transaction.commit();
Does anybody can help?

How to start and stop a progress-bar thread before/after the main thread

hi. I would appreciate any kind of help on my request.
I have this as my main() function
     public static void main(String[] args)
          SwingUtilities.invokeLater(new Runnable(){
               public void run(){
                    Options op = new Options();
                    OdessaClient oc = new OdessaClient(op);
                    oc.setVisible(true);
     }Whenever I try to start a simple JFrame with an indeterminate progress bar on it just before the main function and stop it somewhere after I get a StackOverFlow error
Exception in thread "AWT-EventQueue-0" java.lang.StackOverflowError
     at java.awt.Component.show(Component.java:1302)
     at java.awt.Component.setVisible(Component.java:1253)
     at com.client.CylonBar.hide(CylonBar.java:25)
     at java.awt.Component.show(Component.java:1302)
     at java.awt.Component.setVisible(Component.java:1253)
...and so on...How must I implement something like it?

Not precisely that way, but just off the top of my head, you would have to have a handle to the proccess (server) in the first window, then have a monitor program that allows you take this handle and end it. I would make this monitor program be the gateway to starting and stopping your server. To run a .bat file you can use runtime.exec().

How to start and stop a queue in ECC??

Dear all,
I have a problem regarding the Start and Stop of queues in ECC. Whenever I change the data in ECC (for example extension of a material to a new distribution chain, or Creating a quotation which has to trigger a corresponding quotation in CRM), replication is not happening to CRM. On analysis of the outbound queue in ECC, we are finding corresponding ernties for the material / quotation. On dbl cliking an entry, we are able to see the queue in STOP status. When tried to reset status and activate, system throws a message saying GENERIC STOP SET.
1) How to overcome this problem?
2) How to START or STOP a queue (for Eg: R3AD*) in ECC?
Please respond.
Every point you share will fetch so many points / lot many smiles to you (No surprises.. I am plagerizing the famous quote on SDN)
Regards,
Rajesh

Dear Chandra,
Thanks for ur quick response. I have awarded you a sixer. Ofcourse, the content is much richer than that. But if i award 10, thread has to be closed. So that stopped me from awarding that
Dear all,
Can someone else share their views?
Regards,
Rajesh

How to start and stop a server

I am doing some sockets programming.
Now, when I want to get the TomCat 4 server running for instance, I would have to run the startup.bat or startup.sh file. To stop the server I run the shutdown.bat or shutdown.sh file.
Can I do the same thing in Java?
That is, in one window, I run a program: C:\>java myserver start
The server starts running and holds there.
In another window, I run another command: C:\>java myserver stop
and the server in the other window stops.
I am thinking the server would be running in a thread. When I shut it down, I close the thread just like in the Applet Clock example.
I've tried this but it doesn't work.
Can anyone please advise.
Thanks.
Anthony.

Not precisely that way, but just off the top of my head, you would have to have a handle to the proccess (server) in the first window, then have a monitor program that allows you take this handle and end it. I would make this monitor program be the gateway to starting and stopping your server. To run a .bat file you can use runtime.exec().

How to start and stop looping

I'm very new to Flash / action script, so I just need to know where to put both the start loop, and the end loop code (below) in my Flash file to make the waving effect on this flag (link below) start and stop when I need it to, because I'm adding a small amount of flash both before and after it. thanks.....
loopI = setInterval(loopF,40);
to start the waving and use:
clearInterval(loopI);
to stop the waving.
function loopF(){
    // move the matrix by speed along x to shift the noise
    shift.translate(speed, 0);
    // drawing in the perlin movie clip,
    // create a rectangle with the perlin noise
    // drawn in it with an offset supplied by the
    // shift matrix
    with (displace_mc.perlin){
        clear();
        beginBitmapFill(noiseBitmap, shift);
        moveTo(0,0);
        lineTo(ramp._width, 0);
        lineTo(ramp._width, ramp._height);
        lineTo(0, ramp._height);
        lineTo(0, 0);
        endFill();
    // draw the displacement movie clip in the
    // displaceBitmap (used in displaceFilter)
    displaceBitmap.draw(displace_mc);
    // apply displaceFilter to the flag
    flag_mc.filters = [displaceFilter];
updateAfterEvent();
http://www.senocular.com/flash/source.php?id=0.188

i told you and it's in your message:
use:
loopI = setInterval(loopF,40);
to start the waving.
use:
clearInterval(loopI);
to stop the waving.
// do not edit the below code:
function loopF(){
    // move the matrix by speed along x to shift the noise
    shift.translate(speed, 0);
    // drawing in the perlin movie clip,
    // create a rectangle with the perlin noise
    // drawn in it with an offset supplied by the
    // shift matrix
    with (displace_mc.perlin){
        clear();
        beginBitmapFill(noiseBitmap, shift);
        moveTo(0,0);
        lineTo(ramp._width, 0);
        lineTo(ramp._width, ramp._height);
        lineTo(0, ramp._height);
        lineTo(0, 0);
        endFill();
    // draw the displacement movie clip in the
    // displaceBitmap (used in displaceFilter)
    displaceBitmap.draw(displace_mc);
    // apply displaceFilter to the flag
    flag_mc.filters = [displaceFilter];
updateAfterEvent();
http://www.senocular.com/flash/source.php?id=0.188

How to start and stop an embedded sound

I'm putting a sound of a cat purring in the intro to my animation. I've been asked to make it possible for viewers to turn the sound on and off with buttons. I can do it with an outside sound file by using URLRequest.
Is there a way to start and stop the sound if it is embedded in my library? If so, can someone give me that script.
TIA

Hello mnemo,
You can use your digital signal to stop your generation with the following property node
DAQmx-Triggering
Regards.
Jean-Baptiste C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Téléchargez dès maintenant toutes les présentations techniques !

How to start and stop sapmmc server when windows is started and shutdown

Hi,
May i know how i can make sure the sapmmc server for ECC 6.0 to start when the windows 2003 server is started. I know i need to add this as a service in the windows service manager but i dont know how to do that.
Please advise me on how to add a service to start the sapmmc server when windows is started and how to stop the sapmmc server automatically when windows is shutdown.

Hi Raja
checkout this document m sure it will help you in configuration
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0512c790-0201-0010-72b7-886677ad7955
also check
/message/6511605#6511605 [original link is broken]
All the best ,,
Cheers
dEE

NI PCI 6225: How to start and stop an acquisition using triggers

Similar Messages

Maybe you are looking for