NI PCI 6515 DIO and NI PCI 4065 DMM cards configuration

I am using NI PCI 6515 DIO card and NI PCI 4065 digital multimeter.I haven't any card yet and it will take some days to have them. I have installed these cards drivers. Is there any way that i can configure them in my software. I have added them virtually in MAX. Please suggest me possible ways i am using labview 8.5
timmy

Thanks Sunaina.
But I didn't found any examples regarding pci 6515 and 4065. I also searched C:\Program Files\National Instruments\LabVIEW 8.5\examples. I am uploading some screen shots may b am missing some steps. please help me with this
timmy
Attachments:
1.JPG ‏225 KB
2.JPG ‏181 KB
3.JPG ‏175 KB

Similar Messages

NI PCI 6533 DIO to NI PCIe 6536 compatiablity

Hi All,
I have NI PCI 6533 DIO PCI card which is very old and now NI is not manufacturing the same card , so it is replaced by NI PCIe 6536 DIO . I am using the PCIe to PCI adaptor as I dont have the PCIe slot.
Now my questions are :-
1) does the same DLL can be used to NI PCIe 6536 DIO ?
2) I am using the LabView 5.1 for NI PCI 6533 DIO is that same can be compatiable for NI PCIe 6536 DIO .
can any one please help me in above questions
Thanks in advance
Hussain .

No and no. The 6536 requires the DAQmx driver and DAQmx is not compatible with version 5.1. So, you finally have a good reason to upgrade LabVIEW.

How do I configure 128 channels of DIO and 128 channels of Analog output with the availability of 3 pci slots

I have only 3 slots of PCI or 4 slots of ISA bus, I want to configure with the minimum possible modules to attain 128 channels of DIO and 128 channels of analog output. This is inturn fed to the PCM (Pulse code Modulator). The cards will be placed in industrial PC.

Associate Engineer-Marketing,
Using just those 3 PCI slots you're not going to be able to get the 128 analog output channels. You will probably want to go either the MXI-3 (PCI bus extender) to a PXI chassis or E Series DAQ card to a SCXI chassis for such a high channel count system. Which analog output cards and which digital I/O cards you will want depends on your application. You will have to decide whether you will need static or dynamic analog output as well as whether you need clocked digital I/O or not. I highly recommend contacting our internal sales department at 1-800-433-3488. They are great at helping specify systems.
Ames
Applications Engineering
National Instruments

Can I synchronize two pci boards - DIO-6527 and MIO6036E - via RTSI?

Thanks in advance. I'm interested in synchronizing a Analog PCI (MIO 6036E)and a Digital I/O board (DIO6527). But I am not sure if this is possible via RTSI. Can anybody give me some advice? Are there any Digital I/O boards which own a RTSI-interface?

Well, you can't do buffered pattern input with the 6527. You can only sample the digital lines one scan at a time through software. The speed of this is limited by the speed of the software.
Now, the MIO board already has a built in hardware trigger you can use to initiate an analog acquisition. You can also use your MIO card to "gate" the scan clock using one of the counters. (Only acquire scans while the gate signal is high, for example)
From what I gather, it seems you want to sample the AI and the DI with the same clock and be able to associate each analog sample with a corresponding digital sample. If you do need to do a buffered acquisition of digital patterns in addition to triggering an analog acquisition, then yes, you'll probabl
y want to switch to a 653x. Then you would be able to share the same clock between the two.
If I have misunderstood your application, then could you give me some more detail about what you would like to happen?
Russell
Applications Engineer
National Instruments

NI PCIe 6535 DIO help needed !!

Dear All,
I have NI PCIe 6535 DIO card and I need to write a Labview code which will simultaneously acquire data from 24 channel's with 30 KHz refresh rate for a capture duration of 4 seconds and then Move data and corresponding time stamps to PC RAM.
Somebody please help me on how to achieve the above mentioned.
Thanks for your time and support in advance.
Regards,
WEIVBAL

Hi Weivbal,
have you looked at the examples coming with LabVIEW? Maybe "Read Dig Chan.vi"?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Z600 workstation missing pci data acquisition and signal processing controller driver

I just installed Win7 Pro x86 on my Z600 workstation. It was an upgrade from WinXP Pro. In Device Manager I am missing the driver for the PCI Data Acquisition and Signal Processing Controller and Hardlock USB 1.02. Can someone assist me in finding these drivers. I looked on the Support/Drivers page for this model but couldn't find anything.
This question was solved.
View Solution.

Hi,
You might get better assistance on the HP Enterprise Business Forum since you have a professional worktsation.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Driver missing - PCIe Data Acquisition and Signal .....

Hello, i recently used Boot Camp to install Windows XP on my 2010 15" Macbook Pro.
All the drivers are working (so far) and i haven't encountered many problems.
However, there is one thing bugging me:
When i go into Device Manager in Windows, and look down the list of installed/uninstalled devices, there is a device called "PCIe Data Acquisition and Signal Processing Controller" which has no driver installed.
I'm PC savvy, but i have never seen this before. My guess is that one of the motherboard drivers is missing, and Boot Camp installer doesn't include that driver?
Has anyone seen/resolved this, and if so, how?
Thanks.
Kaj.

Okay, will do.
Thanks.
Also i wonder if you could help with another problem?
http://discussions.apple.com/thread.jspa?threadID=2758766&tstart=0

PCI Data Acquisition and Signal Processing Controller driver

I've installed win 8.1x64 on my HP Probook 450 G2 but I am missing the PCI Data Acquisition and Signal Processing Controller driver.
Can you please help?
Thanks,
Leontina
This question was solved.
View Solution.

Hi:
Please see if installing the Intel Chipset driver installs that device.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

Pci data acquisition and signal processing controller -Device software not installed

My pc shows me ,the driver software for pci data acquisition and signal processing controller is not installed on my Device manager.
Please suggest me a suitable solution.

No its not working , Give me an alternate solution.

Lenovo ideapad yoga 13 pci data acqusition and signal processing center for problem for windows 8

Link to picture
hi everyone,
find original w8 cd and then i installed, when i was installing
i deleted all recovery and other partition, i did not think what can i do,
but then i activated windows and installed all driver, but i taking
after all drivers it stayed
2''unknown devices''
and when i rebooted, it says, usb device not recognized'' and also
''pci data acquisition and signal processing center'' devices problem for windows 8. and touchscreen not working.
i read related for w7 same problem, but what i will do now ?
thanks.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

hi adilsefaersan,
Welcome to Lenovo Community Forums!
By opening your Device Manager right click on one unknown device and choose properties,
>On the properties windows Click on the Details Tab, on the property drop down Choose hadware IDs
> then copy the value and post back here whats on the Value pane
Do it for all those unknown Device and Post here the Value of the hardware ids
also can you share your Windows Version and bit type so we'll knwo the correct download page for you
Thanks and Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Detect and employ PCI or PXI chassis

I'm currently on a project which has historically bee based around a PCI backplane (in a desktop PC) containing a couple of PCI-6229 cards and a PCI-7833R. This forms the core of a testrig of which there are about 25 instances worldwide. In addition, we also support many rigs which are cored around a NI PXI chassis.
There is a drive to replace the PCs and we have opted for a for smaller footprint unit having fewer PCI slots. These are being equipped with an MXI extender card to a PXI backplane. This means in future, we need only keeps spares in the PXI format. Supporting two sets of backplanes containing near-identical hardware without implementing two near-identical pieces of software does present its problems: The FPGA bitmap build for the PCI version of the card will not open through the reference type for the PXI version of the card. We need to have a PCI and a PXI version of the bitmap. Irritatingly, the source code for these two is identical.
The first part of the solution is to establish which backplane we're using. This is straightforward. Supplying the VISA Find Resource function with the appropriate search string will identify if any PXI backplanes are connected. (Figure 1.)
Next, we need to maintain references to both FPGA VIs. Figure 2 illustrates how the FPGA to be used can be opened and proposes a structure in which the references to all available FPGA types (this example actually has four FPGA bitmaps which might be selected). In each of the other cases, the appropriate bitmap is selected in the Open FPGA Reference VI. Further, in each case, the reference is wired to the appropriate component from the cluster. (For calibration records, we also find it necessary to return the serial number of the card, but that portion of this code can be ignored.) Notice that the FPGA_Type component of the cluster is used to control which bitmap loads and which Ref component is used to store its Reference. This is necessary because the reference types are different for each bitmap.
Having set FPGA_Type, Figure 3 shows how to employ the selected resource. A separate Read/Write Control must be coded for each FPGA type.
Closing the resource also requires a case for each FPGA type.
I hope anyone else planning a stepped migration between backplanes can make use of this.

To program any DAQ card for use in Linux you need to use Register Level Programming. Unfortunately, Register level programming for the counter/timer products based on the NI-TIO ASIC (includes the 660x boards) is not supported.

975X and a PCI Controller Card

I am trying to install another SATA controller card to I can flash my firmware on my 360. But for what ever reason this board (975X) isn't allowing me to ever boot to the PCI card.
Any ideas on what settings I need to pick to do it?
Thanks!

I think I have tried that and nothing worked. The card is seen in Windows but just not while booting. I'll try it again here once my computer is done doing some things to where I can reboot. I wanted to make sure I was doing it right and it sounds like I am.

Missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV

missing pci bus 2 and PCI/VEN_10EC&DEV_5209& SUBSYS_3577 103C&REV. Can someone please help me and tell me how to get these drivers downloaded to my pc.Id really appreciate it and thanks in advance...

Hi, It is the card reader. Please try the first one for Windows: http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false Regards.

Is it possible to start a PCI4472 and a PCI-MIO-16E-1 simultaneously using an analog trigger (with pre-trigger)?

I would like to start several PCI 4472 and a PCI-MIO-16E-1 simultaneously. All boards are connected via a RTSI cable.
My program works fine if I use software trigger, or an analog trigger from a PCI4472 channel. However, the analog trigger works only when I set pre-trigger (or pre-scan) to 0.
Is it possible to start a PCI4472 and a PCI-MIO-16E-1 simultaneously using an analog trigger (with pre-trigger)?
Thanks.
Ian Ren

Hi, Bill
I think it is possible to set more than 38 pre-trigger scans on a single 4472 card. I've done this before. You can verify this by running the Labview example "Acquire N - Multi-Analog Hardware Trig.vi" which comes with LabView.
What I try to do but without success/luck so far is to start data acquisitions of several 4472 cards and a PCI-MIO-16E-1 card using an anlog trigger (with pre-trigger).
Thanks for your help.
Ian

NI PCI 6515 DIO and NI PCI 4065 DMM cards configuration

Similar Messages

Maybe you are looking for