NI PXI 2576 Mux and LFH 160 Cable length.
Hi,
This is SIVA from India. We have plan to buy NI PXI 2576 - 64 channel Multiplexer and Interface cable LFH 160. The project is in design stage. We couldn't able to find out the LFH 160 Interface cable length in NI website. If any one come across this cable. please let me know the same.
Thanks
SIVA
Hi Siva,
I believe that the mating cycles on the LFH side is up to 5000, D-Sub side is at least 500. Let me know if you need anything else.
Thank you,
Chad Erickson
Switches Product Support Engineer
NI - USA
Similar Messages
-
My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.
The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao. -
My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?
The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367 -
I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?
If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck. -
When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?
Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
Choose System Preferences from the Apple Menu
Choose Sound
In the output tab you should now be able to make the HDMI "Sticky"
Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI -
Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank youLately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV. -
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
?Is there any Apple TV HDMI port voltage?
When using a HDMI auto switch to connect two devices to a HDMI TV, the
Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
Do you know of any other solutions? Componets? Actual expierances?
Full text below.
Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
Thanks for any help. Sincerely,
HDMI auto switch?Hi Erico,
I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
Do you have any other ideas?
Many many thanks,
Louise -
My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?
bring it to Apple for battery diagnostics.
-
I have a 2008 MacBook with OX10.9.5 and has 160 GB in Hard Drive. Can I expand this in order to Storage more photos and music..?
Yes, any 2.5" dia SATA HDD will be compatible. The largest are 2 TB at the present time> Here is a selection from OWC:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
There are other vendors as well.
You will need a #00 Phillips and a #6 Torx drivers to install the HDD.
Ciao. -
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.
Hi
Chamie7 wrote:
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.
I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
CCT -
i was updating my iphone 3gs software on my pc and it came up with an error and since then i have just had the itunes symbol and a usb cable on my screen. i cant do anything with it what can i do?
The only thing you can do is what the picture is telling you to do: plug it into iTunes and restore it.
-
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Maybe you are looking for
-
Do you remember the days when Apple wrote robust code ? The latest updates have not been great. Maybe the programers are outsourced to a foriegn country now or Noobs out of school ? It looks like someone isn't paying attention to the editing layer.
-
dear All, when i am trying to create the document it is showing me an error. posting period is not open for period 003 2008 what is this error any ideas. regards nalla
-
Hello : Is it possible to make something like this conditions in a Case statment?: Case mycondition of (mycondition >= 10 and mycondition <= 50 ): --do this etc... end Case I know that can use If conditional but is it possible of the above? Thanks in
-
Agent detail report shows calls outside the time range
Hi all, I have an UCCX 7.0 SR5 call center. My problem is that the agent detail report is showing calls outside the defined time range on the historical reporting client. Those calls start slightly after the end time difined in the HR client. Is ther
-
Clientgen does not generate service specific exceptions
Hi, When we use clientgen to generate client stubs and on exploding the generated _client.jar file we find that only the first service specific exception following RemoteException is being generated. All other exceptions seem to be missing. Here is a