NI PXI-8175 not powering up

Hi,
This PXI-8175 in not powering up. We've checked with the facility power & it's okay & there is no issue with the supplu power. When we turn on th swith the SMPS inside the chasis is not powering up, suspecting may be the SMPS gone bad.
I'd appreciate if you can send somebody from your end to our facility to check the system as I can not send the chasis to your end as it's a custom bonded material.
Best Regards,
Tushar Rane

Hi Tushar,
It may be possible for a field engineer to visit your site locally. However this engineer would be unable to affect any modifications or repairs, and would only be able to verify that the 8175 has malfunctioned and indeed needs repair. At this point, the unit would need to be sent into us.
In order to initiate an return merchandise authorization, please give our technical support a call at 1-866-275-6964, so we can obtain all the required information from you.
Knowing this information, if you'd still like to have a field engineer visit you, please reply with your company name, and location of the facility so we can verify which individuals serve your region. You can alternatively call in to the number listed above to speak with one of our support engineers.
Best Regards,
Evan R.
Applications Engineer
National Instruments
http://www.ni.com/support

Similar Messages

MXI3 (NI PXI-8330) board not detected. Not powering up, no link light.

MXI3 (NI PXI-8330) board not detected. Not powering up, no link light. Cable looks fine. Any ideas?

PeteMan,
I will need to know in more detail how your system is behaving to give you better tips, so please feel free to send me more information.
For now, let me send you a couple of troubleshooting tips:
Cable connection
Make sure both ends of the copper cable are well connected to the PCI-MXI-3 and the PXI-MXI-3 boards. Be careful when disconnecting the copper connectors. you need to push down the plastic connector so it does not get damaged. Damaged connectors could result in bad MXI-3 links.
If the connector has not been used properly, it could be broken (this rarely happens). Make sure you are not connecting the cable backwards.
Power - Up order.
It seems you are controlling your PXI chassis using a PCI-to-PXI extender (copper cable). Make sure you are powering up the PXI chassis BEFORE powering up the PC.
PXI is built on top of the CompactPCI spec, so it uses the PCI high speed bus. The MXI-3 extender is really a PCI-to-PCI bridge toyour computer, so for your PC, all the slots in the PXI chassis look like more PCI slots. In other words, your computer suddenly has more PCI slots.
It is very important to power up the PXI chassis first before powering up the computer, because at power up the PC enumerates all PCI slots. If the PXI chassis is OFF during boot up, the slots in the PXI chassis will never get enumerated and your PC will never see the board installed in the PXI chassis.
Normal Power up LED sequence
Each MXI-3 board has four LED light on its front panel: two green lights (POWER and LINK) and two orange lights (Tx and Rx). When you power up the PXI chassis you should see one green light and one orange light ON steadily (POWER and ). Then, when you power up the PC, both green lights shoudl be ON steadily and the orange lights shoudl flicker.
If you do not see this behaviour at power up, most probably one of your boards its damage.
If you have another MXI-3 extender kit, try to set up the system mixing the boards from the two kits to try isolate which board is the one that is damaged.
Run the MXI-3 Optimization Software
The MXI-3 Optimizaton Software makes sure that the link between the PC and the PXI chassis has been set up properly. It will show you an error otherwise.
MXI-3 Software Version 1.15 for Windows 95/98/NT/2000/ME
The PC powers up fine if the PXI chassis is OFF, but if I turn on the PXI chassis first and then try to power up my PC, my PC does not boot
There are several things that could be causing this behaviour:
It could be that your PC has an old BIOS that has issues detecting PCI-to-PCI bridges. You could try upgrading the BIOS.
A part of the hardware could be damaged. If you have a main-stream computer (like a DELL or HP PC, for example), test your MXI-3 extender in it to make sure that the hardware is in good conditions. Main-stream computers tend to use new Motherboards with good BIOS.
There are more tips in the following KnowledgeBase:
KB 267FAS5P : MXI-3 Troubleshooting Guide
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments
http://www.ni.com/ask

My iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates

my iphone 5 is not powering the scree, when i connect the iphone to the power it only vibrates o make the connect sound (is like the sound when you connect the phone to power) and the screen remains black, itunes recognizes the iphone, but i cannot do a hard reset because the power button does not work, and have password in my phone so itunes wond restore it. i want to know if is a hardware problem like the mother board o something. help please

If you have iOS 7 installed, you can try to restore it via the instructions given by lllaass in https://discussions.apple.com/thread/5634135
As an alternative, you could take it to an Apple store genius bar and have the techs test it and see what is wrong beyond the failed power button.

Copying iMovie back to tape: "your firewire camera is not powered on"

I'm trying to follow iMovie 6 instructions for copying a movie back to tape.
I connected my camcorder to the computer with the firewire cable, and it shows up in the Share-->Video Camera menu as an attached device. (It's a Canon Elura 100, btw.)
So all seems well until I start the procedure, and then I get a "Cannot Export to Camera" error message that says "your firewire camera is not powered on or is not available."
My ever so slow brain thinks this might have something to do with the fact that I'm using the DV/firewire cable that I used to import the footage into my iMac, and maybe it only sends stuff OUT the firewire end, and won't send video the other way?
Do I need a different kind of firewire cable?

Thanks for your assistance!
I bought this camcorder from Amazon.com (USA) and I have not daisy-chained it anywhere. I've only connected it to one device at a time. It is capable of receiving digital as well as analog video, and can convert analog to digital.
For example, I used my stereo-video cable to transfer footage from an old VHS tape played by our VCR to my Canon Elura camcorder via the Canon's AV terminal.
Once the tape was safely transferred into my Canon camcorder, I then plugged my DV/firewire cable into the Canon's DV terminal, and the firewire end of it into the iMac. iMovie saw the Canon camcorder and imported all the footage very nicely.
Now I would like to transfer the edited footage from iMovie back to a mini DV tape, and my iMovie help file says I can do it, but it's a little sketchy on what cables I should be using.
The firewire/DV cable I used to send the footage IN to iMovie isn't working to receive the edited footage OUT of iMovie. So maybe I need a different kind of firewire cable?
Thanks for any help you can offer!

HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My apple tv3 is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify

You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

27" thunderbolt monitor is not powering back on with Laptop

Since updating to the new version of Yosemite my 27" thunderbolt monitor is not powering back on when plugged into my laptop via the thunderbolt port. Suggestions on how to get it back up?

Apple Support had me reset the SMC and after doing so my monitor came back up and functioned like it was supposed to. Support said sometimes after updates we need to reset the SMC if changes aren’t cleared from the previous update resulting in behaviors like I was experiencing. Below are the steps i followed to reset the SMC.....
1. Shut down the computer. 
2 Plug in the MagSafe or USB-C power adapter to a power source and to your computer. 
3 On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. 
4 Release all the keys and the power button at the same time. 
5 Press the power button to turn on the computer. 
On MagSafe power adapters, the LED might change states or temporarily turn off when you reset the SMC.

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do

I bought download Adobe Premier elements last year. It is on my old computer which is not powerful enough. I have a new computer that is, I bought and upgrade for $69 but have got no where after several hours. what do I do?

What are you trying to do? What actions are you taking? What happens when you try?

What is the latest BIOS for a PXI-8175 comtroller

I need to know what the latest BIOS is for a PXI-8175 and how to down load it.

The latest version of the BIOS for the PXI-8175 is 1.75.
Here is a link to all the BIOS versions of the PXI-8175: ftp://ftp.ni.com/support/pxi/pxi-8171/BIOS_update/
Inside the zip file, you will find instructions on how to upgrade your BIOS.
Jack

Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light.

Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light. I have tried pressing the small button on the side of the macbook pro to check the battery, but no lights show up.

Hey Angelo_here,
I'd run through these steps:
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh

USB not powering external drive on new macbook pro

My new macbook pro retina display is not powering an external 750GB GDrive moblie. Is anyone having this problem?

It seems as if a number of people are having problems with the USB 3.0 ports on the 2012 MBP's - particularly when it comes to external storage devices.
As you don't have a FW800 port (or, yet, an adapter) the best thing you can do is either return it to your local Apple Store and see if they know of a 'fix' (which I doubt - someone would have posted that by now), whether it's only occurring with some MBP models, and you can always file a bug report with Apple: https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/wa/signIn - you must sign in with your Apple ID.
Hate to be the bearer of bad news, but there have been quite a few people posting here with the same problem.
Good luck,
Clinton

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

When did it happen? After updating/upgrading? or just randomly?
You can try to perform a SMC reset and resetting the PRAM:
SMC Reset -> http://support.apple.com/kb/HT3964
PRAM/NVRAM -> http://support.apple.com/kb/ht1379

Iphone suddenly gone blank. Not powering on

iphone suddenly gone blank. Not powering on. Any suggestions?

Hello Navalagarwal,
The following article contains a few steps that may help get your iPhone powered back on.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Best regards,
Allen

E540: Not powering up

Few months old E540 is not powering up. When I press the power button, the led is lit and the fan turned on but nothing else happens. Nothing on screen and can't even open the DVD tray. Have tried fn+F8, removing battery without luck. Haven't done anything special recently or installed any new software. What next ? Any help is greatly appreciated.

Good day and welcome to the community.
Please have a look at this Knowledgebase article:
https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E540-Cannot-power-up-the-system/ta-p/1497840
Does this seem aplicable to your situation?
Regards.

NI PXI-8175 not powering up

Similar Messages

Maybe you are looking for