NI Report does not work in LabVIEW 7.0

I was running Text Report Example.vi. Every time the Set Report Font.vi is called, error message "Error -2147352573 Member not found" is poped up. I tried to remove the NI Report and reintall the run time engine, the same error message still show up. Except the solutions posted on NI web site, is there any other settings I shoud do?
Thanks.

This may be way off in left field, but you do have the font that it is trying to set it to, right? I don't know what the error means, but that would be something to start with.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Similar Messages

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

CRVS2010 Beta - Crystal Report does not work with VS 2010

After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
Thanks
Patrick
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Thread moved to NET Development - Crystal Reports
Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
From: <Saved by Windows Internet Explorer 8>
Subject: Crystal Reports for Visual Studio 2010
Date: Fri, 2 Oct 2009 17:24:34 -0700
MIME-Version: 1.0
Content-Type: multipart/related;
     type="text/html";
     boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
This is a multi-part message in MIME format.
=_NextPart_000_0000_01CA4385.35B07AB0
Content-Type: text/html;
     charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
then followed by characters whch are not readable.
Thank you for your help
Patrick

Print report does not work in built mode (LV7.1+XP)

Good morning,
I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
I really hope that NI has a solution
for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
Thanks in advance!
Martin

Skinny wrote:
> In normal edit mode I can use the Print Report.vi (using the default
> win printer) to print out some data. The generated report is a
> standard NI report (that is NOT HTML).
>
> When building an application this no longer works. No data is passed
> to windows (the printer icon in the system tray never appears) - and
> hence no output on the printer!
>
> I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
> but I've also tried using the old stable Canon LBP 8 II on the FILE:
> port - but in .exe mode the file box does not appear.
>
> I really hope that NI has a solution for the problem since we need the
> built application on several client. And we do not want to pay for
> several LV licenses.
Are you sure you checked the "NI R
eport Support" under the Advanced
button of the Installer tab in the application builder?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

TCP Listen vi does not work in Labview RT 7.0

I'm trying to use a TCP Listener to accept connections from another PC on the local network.
When running the program with Labview 7.0 all works fine and I'm able to receive IP packets from the remote PC.
However, when I run it in Labview RT 7.0, the TCP listener does not listen on the specified port.
Another issue - after running the program in Labview 7.0, and then trying to run it again with Labview RT 7.0, if the specified port
is the same, I get error 60: "The specified network address is currently in use."
I'd appreciate your help,
Alik

Hi alikm,
I am a little confused on what your set up is. When you say that you are running LabVIEW Real-Time, do you mean that you are running the program on a Real-Time target? How are you establishing that the project you are setting up is a Real-Time project?
Also, if you are trying to access one port at the same time using two systems, you will get an error that you are not able to do this, since you can only write to a single port once at a time.
Regards,
Stephen S.
National Instruments
Applications Engineering

HTMLDB_ITEM.date_popup on single row report does not work

Dear HTML DB Team,
On a report wit a single( one ) row the "HTMLDB_ITEM.date_popup" does not fill the selected date to the cell. (Same for wwv_flow_item.date_popup)
On the same report with 2 or more rows HTMLDB_ITEM.date_popup works fine.
Any suggestions?
Erik
testcase:
create region:
select htmldb_item.hidden(1,empno) empno,
ename,
htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
wwv_flow_item.date_popup(6,null,hiredate) hiredate,
htmldb_item.text(7,sal,10) sal,
htmldb_item.text(8,comm,10) comm,
htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
from emp
delete 13 rows from emp ( 1 row left ):
delete from emp
where ename <> 'KING';
=> date_pop does not work

Using the htmldb_item API vs. built-in multi-row update functionality:
I can't speak to the question about the date for the next HTML DB release. But I'd like to add a few comments to this discussion regarding the use of the htmldb_item API package. It is generally advisable to use the built-in multi-row update functionality instead of htmldb_item function calls when implementing tabular forms. While I do acknowledge that some display types such as date popups are not yet available, I would nevertheless recommend working with what's available on the report column attributes page (i.e. using a text field for the date columns) as opposed to using htmldb_item functions whenever possible. Please keep in mind though that they are mutually exclusive, so they can't be combined on the same report.
The reasons for my recommendation are simple: first of all, if you use htmldb_item calls as part of your SQL statement, the HTML form elements are rendered for all rows in your result set. The built-in types on the other hand only render HTML form elements for those rows shown on your current page, thus you get better performance. Secondly, htmldb_item calls make your SQL statement quite complicated, not only has the engine to jump back and forth between executing your SQL and calling the PL/SQL functions, you also need to take extra care implementing your PL/SQL processes according to the item IDs you assigned in your htmldb_item function calls. When working with e.g. popup LOVs, this gets even more complicated because that type actually results into two html form elements for each column (one storing the hidden ID, one storing the display value). And lastly, by using the multi-row update functionality, you would get lost update detection automatically built. That means, that you can't accidentally overwrite another person's changes in the event that you should both be working on the same data. Implementing this kind of functionality with your htmldb_item based tabular forms would take a lot more effort than simply go with what's already provided.
So please carefully weigh the benefits of additional display types that you'll get by using the htmldb_item API against all the functionality you'll get by using the built-in tabular form and multi-row update features.
Regards,
Marc

Xl Reporter does not work after the upgrade to 2007A PL 47

Hi Experts
UPgraded to 2007A PL 47 from 2005A. Upgrade was done successfully. However the XL reporter is
not functioning. When you go to Tools and click on XL reporter nothing happens. No error message
comes up even.
Client is using SQL 2005 MS server 2003
I ahve done the test upgarde in an image of the live server
thank you
Regards
Aosara
Edited by: Apsara Senaratna on Feb 10, 2010 4:33 AM

Hi Thannga
The answer is no.
I believe when i logon to SAP add on at the bottom of the menu it should come up " connecting Addon: XL reporter" (i get this on other dB's when connecting to SAP)
Could this be related to the environment. As other than this there was no issues with the Upgrade.
Thank you
Regards
Apsara

C DLL does not working in LabVIEW-2011, but works good in LabVIEW-2009

The C-Language dll which I have for an instrument is working good in LV2009 without any errors, but in 2011 it throws 1097 Error code. In this link, it is mentioned that calling convention in "Call Library Node" is changed since LV2010 which I guess could be the reason for the error. But trgically I need to develop my code in LV2011. Does anyone have an workaround to make the dll work in LV2011?
Thanks,
Ajay.
Solved!
Go to Solution.

And the particular issue at hand is, that stdcall functions CAN have but DON'T have to have a particular naming decoration in their exported name (a @<number> appended to the name, and LabVIEW doesn't show this decoration in the drop down box). Before LabVIEW 2010 the Call Library Node automagically corrected a configured C calling configuration to stdcall if it recognized that decoration. They removed that in 2010 because it is possible, and most probably happened in the wild, for a C function to be explicitedly named with this pattern but get exported as C calling convention. With this automatic and hidden correction, LabVIEW is totally unable to call such a function.
The not so nice thing about this would be IMHO that this automagic correction happened sneakily in the background without even being visible at all (the option in the Call Library Node stayed C calling convention, despite that LabVIEW really decided to use stdcall). And it got made even worse by the fact that 2010 removed this sneaky correction but did not add any mutation code to correct for that, when updating a VI from a previous LabVIEW version. That all said the evil has been done and can't be reversed now. Everybody just has to live with it.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Link in Report does not work when run on Citrix

Hello,
we use Crystal Reports (v11) for creating Reports.
Data is based on our CRM system "SuperOffice".
We have several reports and what we did is to add a column that includes a link to SuperOffice.
For example - if I have a list of contacts as a report, then every line has a link to SuperOffice.
If I click this link, the contact in SuperOffice gets open.
This works on lokal pc installations.
But is doesn't work on a citrix server.
If I click the link - nothing happens.
Is that a known problem or does anyone have any ideas for that?
Are there any known problems with links in reports on citrix servers?
Thanks in advance.
Best regards,
Tony

Hi Don,
thank you for fast response.
That is a good advice. We will check that.
The main question is, to which folders etc. does CR needs access?
To explain the situation better: To run the reports we use Crystal Reports Runtime (Version 11.1.1883).
Do you (or anyone else in these forum) know where we could get information about which kinds of access CR Runtime needs to handle with these links?
Regards,
Tony

Why does not work my LabVIEW VI on PDA well? -without error message

I have a LabVIEW VI with subVI's. It works on desktop Windows very well. If I buid it for PDA , there is no error messages. When i it start on PDA, the problem seems to be on the chart.There is an Adams-Basforth Integrator subVI, and in the subVI there is a Formula Node, perhaps there is the problem. I use LabVIEW 7.1 and PDA Modul.
How can i build this LabVIEW VI for PDA perfect?
Attachments:
integral.vi ‏51 KB

Dear smarci
Have you tried building your VI without the SubVIs ("CLK.VI", "INT.VI" and "TIME.VI"). It would be interesting to see whether these cause the program to not execute properly.
Have you looked if your PDA's resources (i.e. RAM memory) are sufficient for you VI?
Best regards
Philipp Roessler

Enter in search field in Interactive report does not work

APEX 3.2.1
When I type a string in apexir_SEARCH field and clichk on OK button, the report behaves in a correct way - it adds a filter line and does filtering.
When I type a string in apexir_SEARCH field and then <Enter>, nothing happens.
The same behavior in IE9 and Chrome.
Apparently, it's gReport.search('SEARCH') function actioned on apexir_SEARCH's keyup event that is fired, but I don't manage to get further.
I have deleted all non-odp processes and created a test IR page, but there the behavior is still the same.
Any idea what could cause this?
Igor

inspect the input element and see if it has something like this
if($f_Enter(event)){gReport.search('SEARCH'); return false;}if not add this using javascript

NI Report does not work in LabVIEW 7.0

Similar Messages

Maybe you are looking for