NI-RIO 4.0 not compatible with 64-bit LabVIEW?

Hi,
  I have a 7841R multifunction RIO card.  I'm currently installing the evaluation version of LabVIEW to test it out.  I've got 64-bit LabVIEW successfully installed and I had installed NI-RIO 3.6 (which was on the disk that came with the card).  In the process of installing other features (I believe the C interface for FPGA or something) I discovered that I needed NI-RIO 4.0.  I uninstalled NI-RIO 3.6, downloaded NI-RIO 4.0 and now I'm attempting to install it.  I get the following message a few steps into the process:
Important note about NI-RIO support for LabVIEW (64-bit Versions)
A 64-bit version of LabVIEW was detected on your system.  This version of the NI-RIO driver does not support 64-bit versions of LabVIEW.  However, this version of NI-RIO is fully compatible with 32-bit versions of LabVIEW installed on 64-bit operating systems.
Is there a version of NI-RIO 4.0 that supports 64-bit versions of LabVIEW?  If so, could you point me to it?
Or should I install the 32-bit version of LabVIEW?
Thanks for the help!
Cheers,
tom
Solved!
Go to Solution.

Hey Tom,
Unfortunately we do not have a RIO driver that is compatible with our 64-bit LabVIEW Development software.  If you need to use the RIO driver, you should install the 32-bit version of LabVIEW and build your applications in that development system.  Sorry for the confusion initially during the installation process!
Ben N.
Applications Engineering
Certified LabVIEW Developer

Similar Messages

  • "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode"  when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    "Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode" 
    when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

    You should probably post your question on the Parallels forums:  http://forums.parallels.com

  • TS1538 Mine keeps telling me that it not compatible with 32 bit needs 64, uninstall and re install which i have done but still hasnt worked any advise please ??

    I need help, trying to update a new iphone 4s and my old phones that were already registered now it telling me that its not compatible with the 32 bit i need the 64 bit to uninstall and reinstall which i have done several times and it keeps giving me the same message so i can't use my new iphone or update my others, some one please help me

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Presenter 9 not compatible with 64-bit PPT 2013

    I've just discovered why I can't launch PPTX on my Win8.1 machine, so I'm posting this for others that may run into this...
    Does anyone know when Presenter 9 will work with 64-bit PPTX 2013?
    Dr.'s Partridge and Jaisingh: Could you please have the Presenter installer check for 64-bit PPTX 2013 prior to installing the software?!

    You have a 64bit OS, that is irrelevant. Apparently, you installed LabVIEW 64 bit.
    For compatibility with your toolkits, you should make sure to install the 32 bit version of LabVIEW. It is fully compatible with a 64 bit OS.
    Once the tookits are installed, you will have additional palettes in LabVIEW that contain the additional functions.
    LabVIEW Champion . Do more with less code and in less time .

  • ITunes 6.0.5 Not compatible with 64 Bit Windows/AMD

    I currently have 6.0.4.2, while upgrading to 6.0.5 and error window pops up to say that iTunes 6.0.5 does not support 64Bit. Is there a way I can get to the older 6.0.4.2 download, as I need a new install. My burner software erased over the itunes drive support and now I cannot burn CD's from iTunes.

    I have quite a similar problem, I reinstalled Win XP x64 and wanted to install the latest version of iTunes as well. I hoped that this version might fix some problems I had before with QuickTime (it seems there is an incompatibility between QuickTime and a Security Update for Win x64). But instead, it refused to install.
    This is really annoying, I bought several songs at the iTunes Music Store in the past and now I can only listen to them on my iBook. That's better than nothing, but I would like to have my music on the PC as well.
    I don't want to install an older version of iTunes because there where some security issues in the past.
    In another thread, someone mentioned that there will be a 64-bit version of iTunes/Quicktime somewhere in the future, but there's no release-date for it.
    Is there a way to give feedback to Apple?

  • Is RoboHelp compatible with 64-bit Windows 7?

    I'm having a problem with RoboHelp/RoboSource (posted about elsewhere in the forum) and in response to a support query, I received a message stating that RoboHelp is not compatible with 64-bit Windows 7.
    Quoting: "Please ensure that Windows 7 is not 64 bit, as RoboHelp is not compatible."
    This seems to be in conflict with the blog posting by Ankur Jain, Product Manager - RoboHelp, (http://blogs.adobe.com/techcomm/2009/12/adobe_robohelp_8_now_supports_windows_7_also.html) in which he states "I'm pleased to inform you that Adobe RoboHelp 8 now also supports Windows 7. With this, RoboHelp 8 is now compatible with Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® with Service Pack 1 or Windows® 7."
    Now, Mr. Jain doesn't specify 32-bit or 64-bit Windows 7, but considering the detail in his posting regarding service packs, I'd expect that a blanket statement like RH is compatible with Win 7 would mean both 32-bit and 64-bit, unless otherwise stated.
    Some questions:
    1) Is RH compatible with 64-bit Win 7 or not?
    2) What about RoboSource? Is it compatible with Windows 7? If so, which versions? 32-bit or 64-bit?
    Also, the tech person said that we also need to try running RoboHelp in "simplified mode." What exactly is that?
    Thank you in advance!

    Hi again
    I'm wondering if the "Simplified" bit is stemming from this Adobe Knowledge Base article?
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Mail app deleted and reinstall wont open, says not compatible with OSX

    i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)

    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks.

  • I have Trend Micro antivirus for Windows 7, but I am being told it is not compatible with Mozilla 9.1, how do I get an older version or adapt?

    I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.

    See:
    * http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632

  • I have installed Firefox4 to find it is not compatible with my version of OSX how do I get version 3.6 back or do I just give up and use Safari?

    I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!

    Go to this link and find your language:
    http://www.mozilla.com/en-US/firefox/all-older.html

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

    I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
    XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
    Another message they get is:
    AutoConfigAlert:
    Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
    This is on Windows XP

    Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20

    Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
    Platform version '1.9.2.18' is not compatible with
    minVersion>=1.9.2.20
    maxVersion<=1.9.2.20"
    That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?

    You're welcome

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • I'm getting this error statement: XULRUNNER error: platform version 6.0.2 is not compatible with min etc max etc6.0.1 - what is this about and how can it be corrected?

    This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
    XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
    What is this about and how can I retsore access to Firefox on my pc?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

    How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

    How to Downgrade OS X Yosemite Back to OS X Mavericks

Maybe you are looking for

  • Cannot create billing document from sales document

    Hi, i am trying to create billing document from the created sales document. But the billing document is not generated. I was getting  the error - ' Document is blocked from billing'. SO, i changed the billing block and left it blank, and when  I trie

  • My computer stopped recognizing my ipad mini.  How can I fix it?

    My computer stopped recognizing my ipad mini.  How can I fix it?

  • Code changes during database upgrade

    Hi, We are planning to upgrade from 10gR2 to 11gR2 on AIX plateform. Do we need any mandatory changes in existing codes (at sql level or plsql level)so that the the behaviour and the performance of the system remain same after upgrade? Thanks.

  • How to list a table field as a checkbox on ALV with button to update tbl

    The requirement of my report transaction is to display rows of the z_table where one of the fields (revision complete? y/n) is to be displayed as a checkbox. This checkbox is editable for the user to check or uncheck. When the user edits the checkbox

  • Wind Blowing Effect - HELP

    Hello, I'm trying to create the effect of a plant blowing in the wind. I'm not a Action Script guru by any means. Currently, I just have the plant on the stage and I just skew the image every 10 frames or so and tween. It's OK but it's jumpy and defi