Ni-Scope 3.3 driver install

I run LV 7.1 , LV Run Time 8.0 , MAX 4.0 , Ni-Daqmx 8.0 and Ni-Scope 2.1.
Now I need Ni-Scope 3.3 for my PCI 5911 hi speed digitizer.
Could I " overwrite " the present Ni-Scope 2.1 or should I deinstall 2.1. en install 3.3 from scratch ?
Thanks for help ( couldn't find the answer in the archive ).
Peter.

Hi Peter,
NI-Scope depends on NI-DAQmx for low level device detection and simulation. So when you upgrade to NI-Scope 3.3 NI-DAQmx will also be upgraded to the minimal version that is requered for NI-Scope, you can find this inforamtion in the readme file of NI-Scope.
MAX is part of all NI Driver software, thus also NI-Scope and NI-DAQmx. the MAX will also be upgraded to the minimum version required by the NI-Scope 3.3.
Hope this helps,
Thanks
Karsten

Similar Messages

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

How to restore music on computer after new hard drive installed?

had new hard drive installed and am not able to retrieve/find music that was backed up on my computer before new hard drive was installed. Only music that was in the "cloud" was able to be retrieved. Any idea where it could be?
Thanks!

Did you reinstalled iTunes ? It looks like you had a newer version of iTunes with the corresponding database, and now your iTunes seem to be an older version. If you are a little patient, you might easily fix this with iTunes 10.5 which should come out very very soon since iOS 5 has been annonced for tomorrow.

I have an Epson printer on a Wifi network. Windows 7 desktop and and HP Win 7 laptop (my wifes) print to it just fine. My MacBook Pro running Yosemite won't detect it, and I have the latest driver installed. No problem when I had a Canon...

I have an Epson printer on a Wifi network. Windows 7 desktop is running the network, and my wife's HP Win 7 laptop prints to it just fine. My MacBook Pro running Yosemite won't detect it, and I do have the latest driver installed. I didn't have a problem when I had a Canon Pixma on the network, but when I replaced it with the Epson nothing seems to work. I go to add a printer to the queue and only the FAX function of the printer shows up - not the WS-4530 print function. Does anyone out there have any suggestions? Please??? :-)

Hi Kelly,
As someone who has to print from my Mac to a networked printer at home all the time, I can certainly understand how frustrating it must be to have that fail to perform as expected. Let's see if we can get you up and running.
I would suggest that you troubleshoot using the steps in this article -
OS X Yosemite: Printing troubleshooting
Start with the section titled Check the network.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

I had a new hard drive installed on my IMac. Now I am trying to find my photos on time machine to restore on Iphoto. How do you do this?

I had a new hard drive installed on my IMac. Now I am trying to reload everything back on. I do have time machine. How do I find all my pictures on TIme Machine to load back on IPhoto. I hope I haven't lost all my family photos. Help! Thanks a bunch!

Hi, I never use TM, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Is it possible to get a 1TB hard drive installed into my Macbook Pro Retina?

I am a photographer and I have a lot of photos and its hard to store them all. I have a back up drive I currently have my iPhoto library on, but it crashes a lot.
Can I get an internal drive installed? How much does this cost?

Welcome to the Apple Support Communities
The MacBook Pro with Retina display can only use flash storage because a hard disk doesn't fit onto this computer. Unfortunately, the only thing you can do is to store the photos onto an external disk, if they doesn't fit onto your flash storage.
If your external disk is slow, you may want to buy a Thunderbolt external disk. It's much faster than a USB external disk and you shouldn't notice any problem anymore with it

My old iMac broke so i got a new hard drive installed. How can i retrieve my old purchased items?

hiya
got a new hard drive installed and couldn't retreive anything off my old hard drive
can i get my old purchased items from itunes
thanks

Hi hopscotch,
Log into the iTunes store and do a search to find your previously purchased items. Click the "Buy" button, and put in the same iTunes id and password that you originally used to purchase. A dialogue box will come up indicating that you have already purchased this item and do you want to download it again for free....
Say yes, and it will be re-downloaded to your Mac.
Hope this helps!
Cheers,
GB

A connection to the deployment share could not be made - Networking device did not have a driver installed

I have a couple of HP 8200 desktops that I think might have bad nics. When I PXE boot them and start my LiteTouch, I get a Wizard error that says
A connection to the deployment share (\\mydpshare\share) could not be made. The following networking device did not have a driver installed
PCI\VEN_8086&DEV_1502&SUBSYS_1496103C&REV_04
I have that driver in MDT and it works on other HP 8200s. Looking into the Wpeinit.log, it looks like the driver loads but maybe the nic is bad:
Installing device root\kdnic X:\WINDOWS\INF\kdnic.inf succeeded
Installing device pci\ven_8086&dev_1502 X:\WINDOWS\INF\net1ic64.inf succeeded
Spent 16903ms installing network drivers
QueryAdapterStatus: no adapters found
Spent 0ms confirming network initialization; status 0x80004005
WaitForNetworkToInitialize failed; ignoring error
Has anyone seen this before?
Orange County District Attorney

Hi,
According to your description, it should be Intel NIC driver problem. I have checked HP official website, there is new NIC driver released, please access to the link below to download the NIC driver for test:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5037932&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dvc_111651_1%257CswEnvOID%253D4060%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Roger Lu
TechNet Community Support

HP Color Laserjet 2600n cant print on Win8 even with the right driver installed!

I configured the HP Color Laserjet 2600n from TCP/IP port and dit the windows update on drives, installed my printer but it won't even print the test page. it says error printing on the print queue. I cheked the network and sharing. I checked the printer works perfectly on Win 7 but not on my hp Win8.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp deskjet 2514 driver install issue

My deskjet 2514 driver will not install properly from the website or cd provided and this is very upsetting. I can't not use the printer from my laptop running window 7 at this point in time. I have runned the install wizard and troubleshooter and still can't get the driver installed and I have had no issues with a different hp deskjet1000c on my desktop running WinXP. I need to know as to why the driver is not installing at all. I saved the driver onto another cd (blank) to try it and still fails to install. How can this happen when the printer is brand new from the store and is useless.

I have the same exact problem. I get driver 82801EB 24D2 during the initial install, then I went to troubleshoot and it says it found the problem and to install again and each time it gets the same driver issue but a different ending suffix. it goes from 24D2 to 24D7 and 24Dx.

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.

New hard drive installed on my 2009 mac book. Can I reinstall pages, numbers, etc... from the App Store? I was running Lion.

HI Corey ...
Yes. Make sure you use the same Apple ID.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
If you can't re dowload the apps, launch iTunes. From the iTunes menu bar top of your screen click Store > Authorize This Computer. Sign out of the iTunes store and try re downloading your apps from the App Store again.

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
(110687)

Ni-Scope 3.3 driver install

Similar Messages

Maybe you are looking for