NI software won't detect Multiple Ethernet Cameras

I have two identical Ethernet cameras which have been assigned unique static IPs. NI software  (MAX, Vision assistant) will only detect one of them. Is there some special setup that needs to be done so that both are visible to NI software?

Yeah, let me clarify.
When using certain IP cameras with DirectShow drivers, MAX will treat the DRIVER as the camera, and not the device itself, and will therefore only show one device available.  One workaround is to use a different driver, like the one I mentioned, to allow the second camera to be connected.
There may be ways of installing a second instance of the IP camera driver, but I am not aware.
This does not apply to USB cameras, which also use DirectShow.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

Similar Messages

  • My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help!

    My Canon MP Navigator scanner software no longer detects multiple photos on the platen - help! I have scanned thousands of old photos over the last few months without problem. I scanned several full pages from photo albums right before this problem began. I wonder if there is some sort of memory which is not being cleared.  I have researched everything I can findto no avail. Any ideas?

    I'm not familiar with this software, but if your scanner is supported, you can achieve this task via Preview.app.
    Printer and scanner software available for download
    http://support.apple.com/kb/HT3669#gestetner
    I believe your model would fall under the MX880 series, and if that's correct, you'll be all set once you learn Preview's way of scanning.
    Best of luck!

  • IPad won't detect iPhone with camera connector

    So I got the camera connector kit and wanted to use it to transfer photos from my iPhone 4GS to my iPad 1. Unfortunately, the iPad doesn't detect it, it just sits there. How do I fix that?

    According to the support page: "In addition to supporting digital cameras and SD cards, you can also import photos and videos from your iPhone*, iPod touch, and iPod nano (5th generation) using the Camera Connector."
    http://support.apple.com/kb/HT4101

  • Computer won't detect camera

    All of a sudden my computer won't detect my Rebel XT. I replaced the USB cord but nothing is even detected in "My Computer" or in the Device Manager. I am sure that the USB ports work properly as they work with other devices.  I reinstalled the software it came with and tried changing the communication settings on the camera. Does anyone have any suggestions? 

    Hello!
    To ensure the most accurate information is provided, we will need to know the version of Windows you are using.
    Thanks and have a great day!

  • New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

    New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.  If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially.  Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time.  How do I fix this?

    If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

  • Software won't recognize SX50 camera

    I installed the software, and uninstalled and reinstalled but the software still does not recognize my camera.  I know my computer does because it shows up in image capture.  Help!

    Hello -- I had the same problem and just about 2 minutes ago, received the following info from support.  I was told that they are going to release an update making the software compatible with Mavericks and that it was to come out sometime around the end of November.  Because I need to make a plan around it, I wrote back for a closer approximation, since we are now into December.  Here is what I got in the email from Support:
    Thank you for contacting Canon product support regarding software for your PowerShot SX50 HS camera.
    Canon is conducting compatibility tests for the current versions of Canon digital imaging software with the shipping versions of the new Mac operating system.  Results will be posted soon at www.powershot.com.  For now, Canon is not claiming compatibility with this version of Mac OS.
    Mac OS X 10.1 and newer come with Image Capture drivers that support most of Canon's digital cameras with USB interfaces.  When a compatible camera is connected to a compatible Mac computer running OS X 10.1 and newer, the computer detects the camera and automatically launches Image Capture.  This Apple program allows JPEG images in the camera to be downloaded to the Macintosh.  Try doing the following to download the images:
    1.  Click on your hard drive.
    2.  Open your APPLICATIONS folder.
    3.  Open the program that says IMAGE CAPTURE. 
    4.  With Image Capture still open, click on the IMAGE CAPTURE menu, found on the top left corner of your screen, next to the Apple icon. 
    5.  Select the option that reads PREFERENCES.
    6.  The dialogue box that appears should say something like "When camera connected open."  From the pull down menu select IMAGE CAPTURE and then close the window. 
    The next time you connect the camera to the USB and power it on in replay mode, Image Capture should come up and download picture files on the camera. 
    I haven't tried this yet.  Just thought I'd post this info while I had the time.  I hope it helps you.
    Marie

  • Macbook won't detect ethernet cord...

    Hey guys-
    I'm staying in my girlfriends dorm and last night and earlier this morning the internet was working fine on my Macbook and then all the sudden it stopped detecting my ethernet cord...I keep plugging it in and out and no detection and then I put it in my girlfriend's macbook and it connects instantly...any ideas?

    My daughter is a student at U. Mass. Amherst and she's having the exact same problem with her Dual Core Macbook. It just stopped connecting via Ethernet out of the blue last week.
    Her roommate can get on fine with the same jack and cable. Since the port detects when the cable is inserted or removed, that suggests the port itself is ok... right? She can get on via airport elsewhere on campus, but not in her room, so that's a pain.
    She's up to date with the latest firmware and OS -- in fact, I updated it over the weekend, not knowing whe was having problems back at school. the folks who run the campus computer support center are apparently not too Mac-savvy.
    Were you able to resolve this problem?
    Thanks...

  • My computer won't detect my iTouch!

    I just bought a new iPod touch today and tried to set it up.
    It won't connect to my computer.
    Now I'm not sure where the problem is actually coming from.
    So to register everything I use my brother's computer and it worked fine.
    Now, I can't sync my iPod.
    Everytime I plug it in, my computer just beeps, indicating that a software has been detected and it just beeps again undetecting itself.
    So I thought maybe it's my computer's problem.
    HOWEVER, when I plug my old iPod in, it syncs, detects, downloads with NO PROBLEM.
    So I thought maybe it's the iPod that has something wrong with it.
    I tried it on both my dad's and my brother's computer they had NO PROBLEM.
    I'm currently using Windows Vista, With Service pack 2.
    My iPod touch is the new one that came out with the camera on it.
    Please help.

    I FIGURED IT OUT.
    It's working now.
    Sorry for the triple post but I really am not sure how to edit my last post.
    Other than that, I followed the instructions here
    http://support.apple.com/kb/TS1538
    and tried to update my driver
    However, it wouldn't work properly and they keep saying that it doesn't work with my 32-bit system.
    So I browsed around some more and found this..
    http://discussions.apple.com/thread.jspa?threadID=2231186
    The solution is here.
    I followed the exact instruction and voila!
    Everything is now working normally.
    Thanks for everyone who tried to help
    cdnfs wrote:
    FIXED!!!
    apple does not properly install drivers into C:\windows\system32...
    so, you must unzip the itunes install.exe, extract apple mobile device support.msi
    download a program lessMSIerables, this extracts files from .msi install files
    extract everything from apple mobile device support.msi
    NOW - use the above guide to update drivers, then instead of looking in the windows folder, simply tell the driver install to look in the folder where you extracted the .msi
    everything solved
    take a crack at it, its not as hard as it sounds
    sorry if i wasnt very concise, a few glasses of wine and a blunt later:)

  • ActiveSync won't detect my Treo 750

    Help!!
    I started with Windows Mobile 5 before with Activesync 4.2 and it worked just fine.
    a year ago, I updated my palm with WM 6 and Activesync 4.5 and it worked just fine.
    Recently, I have got new laptop from my company and try to re-install activesync.
    During the process, I accidentally deleted the connection in my palm and everything is gone!!!
    I tried to install activesync 4.5 in my new laptop and try to connect them, however, activesync won't detect my device.  It did not even charge my mobile.
    Curious enough, I tried to connect it with my other laptop at home (using Activesync 4.5) and it did not detect the device as well.  Running out of idea, I removed Activesync in my home laptop and install Activesync 4.2. Try to connect and it worked!!! However, an error message came out saying that I need to have ActiveSync 4.5 to synchronize with WM 6.
    I uninstall the ActiveSync 4.2 and install 4.5 in the laptop and try to synchronize again.  But this time, same situation happens again where Activesync did not recognize my device!!!
    What to do, I am running out of idea.  Help me please...
    Michael
    Post relates to: Treo 750 (AT&T)

    I went through all the recommended steps I found online and spent 2 hours with palm support and 1 hour with Dell support and still was unable to connect my att palm treo 750 using activesync when I had successfully done so in the past.  I am using a treo 750 with winmobile 5 ver and activesync 4.2  connecting to win XP pro. I would see the phone in my device manager but it would not connect. This is what I discovered that fixed my problem and not just on my Dell computer but another computer I have as well. I would go into the phone to  Start/Settings/Connections Tab and found USB to PC and check the box to allow advanced connections. I would then remove the battery. unplug the USB cable and reinstall the battery. After phone boot up, plug usb in and attempt connection again and it would fail. Again open on the phone the  Start/Settings/Connections Tab and found USB to PC and uncheck the box to allow advanced connections. If connection fails (it probably will) pull battery from phone and unplug USB. reinstall battery to reboot phone then plug the USB cable back in. My device would again connect.. This needs to be done every once in a while because of the buggy phone and/or activesync software. I hope this helps anyone and prevents them from wasting as much time as I have on keeping an otherwise good phone in sync with an xp computer. Peace and long live a free internet and quality software....

  • LaserJet Pro MFP M276nw software installer not detecting printer via USB or wi-fi - Windows 7

    I am trying to install a LaserJet Pro MFP M276nw on Windows 7 Home Premium x64, and I know the printer functions fine, as I have installed it on both Windows Vista Basic x32 and Windows 7 Professional x64 all on the same desktop. The operating system has been changed a couple of times, hence the multiple installs.
    I downloaded the full featured software from HP.com and went through the routine of installation as per usual, except that now the software doesn't detect the printer when it requests that I connect it via USB.  Trying to install via wi-fi doesn't work because the printer still needs to be attached via USB in order to create the proper wireless handshake.  Windows 7 detects the printer, and in-fact installed the drivers for it automatically.  However, the printer installation software suite does not respond to the printer being connected, and just hangs there, waiting for it to appear.
    I have tried multiple USB ports and it's the same issue.  I've installed the basic driver also available for download on HP.com, but that software does not appear to include an option for scanning files to the computer.  The printer itself will scan to email or to to a USB thumb drive, and even to a network folder, but not directly onto the computer.  If it wasn't a necessary function of an all-in-one printer, I wouldn't bother with the scanning feature and simply make do with the basic printer driver. 
    Anyone have some sort of idea regarding this issue?

    Hi @KP_ ,
    I see that you are having issues with setting up the printer on the one computer. I would like to help you out today.
    I would uninstall the software, turn off the Startup programs, Antivirus software and update the driver during the install by the post I have provided.
    Disconnect the USB cable.
    Uninstall the software.
    Here are the steps to run the uninstall from the computer or the CD.
    To uninstall from program files:
    Touch the Windows key and the E key to access the computer window.
    Select the C drive.
    Select program files or program files x86.
    Open the HP and printer name folder.
    Select uninstall.
    Uninstall the software from the CD:
    Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Download, save and then run the latest drivers. Don't Connect the USB cable until prompted during the install.
    HP LaserJet Full Feature Software and Driver.
    Right after connecting the USB cable, follow this document immediately. A Fatal Error Displays During Software Installation. Disregard the title. If the printer stays listed properly, don't worry about updating the driver.
    Test the printer.
    Then you will have to go back and enable the Startup programs and turn the Antivirus Software back on again.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • 10.5.8 won't detect any external hard drives

    I want to update my 10.5.8 Macbook Pro which I bought in 2008.  It runs incredibly slow, and I want to reformat it before updating with Snow Leopard.  The problem is that my computer won't detect any external disc drives, so I can't back up my important files.  Is there any way to fix this, or is there something I'm missing?
    I'm also wondering if I'll be able to reformat without my original OSX install disc that came with my computer, and if so, how?  Thanks in advance.

    If you are going to be upgrading to OS X Snow Leopard, the installer for that should be able to format your drive for you before you do the installation.  I'm assuming that you have those CD's for your computer as you need discs to be able to ugrade to Snow Leopard.  What happens when you plug in an external drive?  Does it just not recognize the drive, or do you just not have it selected to show the drive on your desktop?  With Finder being the top window, click on the Finder Menu and select preferences > select general in the tabs at the top and then make sure that External discs is checked.

  • Computer won't detect audigy

    Greetings all:
    I looked for a while in the forum, but did not find this question, so here goes:
    I purchased an audigy 2zs platinum 0 months ago and had no problems until a month ago when I had to reformat and reinstall windows (one of my sata raid dri'ves died/fried). The windows install was on a new dri've, so there are no residual drivers from the previous install (to my knowledge - but I have tried to install it a few times now). Now windows xp home will not detect the audigy 2zs at all. It does detect the midi/game port on the card. I have also been able to use the firewire port on the card. It just won't detect the card, and I have had to revert to the onboard sound. It will only recognize the card as a "pci audi device" and not as a "audigy 2zs" like it did when I first bought it.
    I like the zs, plus the front i/o bay is handy. Any thoughts on this problem? I have already tried a different pci slot with the same result. Is there a way to force the driver install? Is there a residual driver I am missing? Could the card be fried?
    Here is my setup:
    p4(478) 2.8 ghz, asus p4p800 dlx, ati aiw 9800 pro, audigy 2zs platinum, old-fashioned ide ata hd for now.
    Thanks, Christopher

    I think you may have misunderstood. If you do it that way and navigate to the windows CD then yes, it will install the windows driver. But i meant the Creative CD. If you install the basic CREATIVE card driver you should then be able to install all the other software. But the basic driver should sound no different than with the software except that the software allows you to EQ it and such.
    Your problem as i understand is that windows DOES recognise there is a device there, but doesn't know where the driver is. So you need to manually navigate to the basic driver on the CD and once thats installed use the CD to install the software.
    Also, i don't see why you can't just uninstall the unknown device in device manager, then without rebooting install from the creative CD as you normally would. In other words, the reason trying to install from the CD as normal isn't working right now is because of the unknown device in device manager. Some kind of conflict between that and windows knowing what to do with the CD install when you try that. So uninstalling the device first then doing a normal instal may also work.

  • Itunes won't detect ipod...

    Hey all. I previously installed my ipod on my computer with all the software and it was working fine. It was working perfectly. I decided to return it to get a smaller version, but before I did that, I had to restore the factory settings. I later decided to keep the current ipod, but now itunes won't detect the ipod. I tried reinstalling the software numerous times and it didn't work. I also plugged it into a different usb port like the manual suggests but it still doesn't work. Can anyone please help? thanks.

    i love you whoever posted the thread in this link!!!!!!http://discussions.apple.com/thread.jspa?threadID=299830&tstart=90

  • ITunes won't detect my iPhone 4

    I currently use a MacBook Pro with the 12.0.1 version of iTunes, however I also have an iPhone 4 and recently got an iPhone 5. In order to backup my iPhone 4 and put it onto the 5 i need to be able to sync, but iTunes won't detect my device (iPhone 4). I have completely uninstall iTunes so that I can install an older version that is compatible with my iPhone 4.
    So my question is, what is the latest version of iTunes available that is compatible with the iPhone 4 software of 7.1?
    All help is appreciated, thanks.

    For anyone else having this issue on OS X this post will fix it.
    Steps 7, 8 and 9 may not be required in Snow Leopard.
    http://discussions.apple.com/thread.jspa?threadID=2465013&tstart=0
    Reinstall the Apple Mobile Device Service:
    1. Disconnect your iPhone, iPad, or iPod from the Mac.
    2. In the Finder, locate iTunes in the Applications folder and drag it to the Trash.
    3. Move the iTunes icon to the Trash.
    4. Choose Go > Go to Folder.
    5. Enter /System/Library/Extensions and click Go.
    6. Locate the file AppleMobileDevice.kext and drag it to the Trash.
    7. Choose Go > Go to Folder.
    8. Enter /Library/Receipts/ and click Go.
    9. Locate the file AppleMobileDeviceSupport.pkg and drag it to the Trash. If prompted, authenticate with the administrator password.
    10. Restart the computer.
    11. Choose Finder > Empty Trash and restart the computer.
    12. Download and install the current version of iTunes.
    13. Connect your device to the Mac again and open iTunes & see if you can sync now.
    Message was edited by: kazop

  • 3429 - Won't detect Networking Devices (And can't manually force drivers)

    Got an "old" 3429 from a friend who's been using it at their office for a few years - Did a complete re-format and installed Windows 8 on it.
    But now it won't detect any of the network hardware (Ethernet OR Wireless) and I can't get it installed manually (not for lack of trying) by using the drivers listed on the driver download page for the computer.
    Additionally - Can anyone tell me what kind of RAM limits this machine has? The specifications seem to be for a never revision of the Thinkcentre that claims the machine uses standard size DDR3 sticks, which doesn't correlate at all with mine - It has a single laptop sized RAM slot (SO-DIMM?)

    I've double and triple checked everything now - Both adaptors are enabled in the BIOS, the Ethernet port shows yellow light when connected to the network and nothing appears in Device Manager for either adaptor (No matter how many times I tell it to scan for hardware changes - nor are they pre-installed and present in the list. Only the bluetooth connection is running)

Maybe you are looking for