NI Spy does not capture data unless I am in VB debug mode

We use the NI C++ libraries to create VB controls for users to interface to external equipment using GPIB. Something that has happened recently is that while doing debug work, NI Spy captures no calls unless the user has his code running in VB. The C++ controls are compiled and are not provided to the user so the same underlying code (ib calls, not VISA calls) is executing no matter if the session is in VB debug or running standalone compiled.
This used to work fine but since ~GPIB v1.7 this seems to be a consistent problem. For a developer this is not a hard problem to get around but when trying to collect data from systems in the field where VB is not installed it is a major roadblock. Any ideas?
I am not sure if there is anything that we should modify or if this is just an NI-Spy issue. I'm open to whatever solutions might allow for data collection under all modes of operation.

Hey Warren,
Long time no speak. I was talking to some of our developers about how this might happen, and it's never been reported to our knowledge. Here're my standard questions:
-Is this OS 2000 Advanced Server like we were working on before?
-What is the version information that shows on your NISpy.exe file in C:\Program Files\National Instruments\NI Spy?
-What is the version information that shows on your nispylog.dll file in C:\Windows\System32? (These should match)
-Can you search your system to make sure that only 1 NISpy.exe and nispylog.dll exists?
-What version of NI-488.2 are you using?
-Do VISA calls similarly not show up in NI Spy?
I'm going to have Shawn continue to handle this one, but I'll be talking with him offline and maybe together we can figure out what's going on.
Scott B.
GPIB Software
National Instruments

Similar Messages

Format that does not permit data modification?

When I try to change date/time of some images, I get this message.
+"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.

kfuse wrote:
When I try to change date/time of some images, I get this message.
+"Aperture was not able adjust the date and time of the master files because they have a format that does not permit date modification."+
While some images are modified successfully, others are not. Those files are not locked nor wrong permission setting. Anybody know what is causing this? The files are all Nikon's NEF files.
hi, kfuse
unless I'm mistaken you cannot edit the exif data created from the camera like date and time. you might want to do a search about this subject in our forum, there was a big brouhaha regarding this about a couple of years ago regarding a court case and exif date/time data.
victor

Submit MC.9 does not retrieve data in background processing.

Hi,
Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
kindly advise,
regards.
Message was edited by:
sheldon barretto

Hi Tushar,
Thanks for ur reply.
I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
Does it mean i cant run MC.9 in background.
regards,
Message was edited by:
sheldon barretto

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.

-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

AddOnsLocalRegistration.sbo file does not match data in the common datab...

We are receiving the following error everytime we logon our pc for the first time: Add-On Outlook_Integration: This Add-on cannot be upgraded. AddOnsLocalRegistration.sbo file does not match data in the common database for this add-on. See SAP Note 1323680 for more information.
A few months ago, SBO Server was moved from one server to a new virtual server, but we had no problems with the addons. The other day, we upgraded from SBO 2007 to 8.8 and now we are having problems with the Outlook Integration.
I have followed the directions in the message noted above, and did find the AddOnsLocalRegistration.sbo file in some odd places, with a reference to the old server. I cleaned this up, on the server and the client and I can get it running...however, after the user shuts down the pc and logs back in the next day, the problem is back.
In the process of cleaning this up (un-registering the addon and removing the addon references in the local .sbo file) I noticed at times that we would still receive this error, when there really shouldn't be an reference to it.
Thanks for any help.

Hi Vaughn.........
I guess you need a re installation of Outlook Integration Addon.
Whatever version addon of OI you installed just uninstall it and Install it freshly from 8.8 setup package......
Regards,
Rahul

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

Server Socket does not read data input stream

Hi all,
I am very newbie to Java Network programming with sockets and multi-threading.
But I am obliged to develop a chat system written in Applets which can be placed on the website and used by visitors who come to my website.
In order to understand this, I have tested a basic web chat program I downloaded from the Internet which use sockets and multi-threadings. The program work fine, no bugs at all at both compilation and run time. I noticed that all three streams for Client side (i.e. first one is input stream used receiving data from User; the second one is socket input stream used for receiving data from Server socket, and the third is socket output stream used for writing data to server socket) were established. And the same, two socket streams (input & output) for Server side were also connected when running program giving right port number and IP address of the server.
The problem is both server and client sockets do not read data using the following stream classes:
1. DataStreamInput: I use input.readUTF() method
2. or BufferedReader: I use input.readLine() method
The example of the codes are below:
private BufferedReader input = null;
private PrintWriter output = null;
private Socket socket = null;
public void open() throws IOException
{ input = new BufferedReader(new
InputStreamReader(socket.getInputStream()));
System.out.println("Server socket input stream was created, and");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Server socket output stream was created");
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
System.out.println("Server is reading data from Client, wait...");
String fromClient = input.readLine();
System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
The problem is at the line: String fromClient = input.readLine(); in the run() method? What is wrong with the codes above?
Note: I also try to use original codes which use readUTF() method in DataStreamInput class instead using readLine() in BufferedReader. Both methods dont read data from inputstream socket?
I very appreciate any help/advice from experienced developers.
Best regards

Hi,
Yes. The readLine() method hangs! After the test, the execuation of the program is stopped at the line of readLine() method; it does not pass it?
There is no problem with writing to Server socket. After the test, the program pass through flush() method. Here is the code for writing to sever socket within ChatClient (client side socket) class:
private BufferedReader input = null;
private PrintWriter           output = null;
public ChatClient(String serverName, int serverPort)
{ System.out.println("Establishing connection. Please wait ...");
try
{ socket = new Socket(serverName, serverPort);
System.out.println("Connected: " + socket);
start();
catch(UnknownHostException uhe)
{ System.out.println("Host unknown: " + uhe.getMessage()); }
catch(IOException ioe)
{ System.out.println("Unexpected exception: " + ioe.getMessage()); }
public void start() throws IOException
{ input   = new BufferedReader (new
                         InputStreamReader(System.in));
System.out.println("Client User input stream was created,");
output = new PrintWriter(socket.getOutputStream());
System.out.println("Client Socket output stream was established, and");
if (thread == null)
{ client = new ChatClientThread(this, socket);
thread = new Thread(this);
thread.start();
public void run()
     while (thread != null) {
     String fromUser;
          try{
               while((fromUser = input.readLine())!= null)
               System.out.println("Client wasreading a data from User, and");
output.println(fromUser);
     output.flush();
     System.out.println("Client has written a data to Server");
catch(IOException ioe)
{ System.out.println("Sending to server error: " + ioe.getMessage());
stop();
etc.
Here is a piece of codes for reading data from the Client Socket in the ChatServer Class (Server Side socket):
public void run()
{ System.out.println("Server Thread " + clientPort + " running.");
while (true)
{ try
{ //server.handle(clientPort, input.readLine());
System.out.println("Server is reading data from Client, wait...");
String fromUser = input.readLine();
//while((fromUser = input.readLine()) != null)
     System.out.println("Server received a message on " + clientPort + ".");
catch(IOException ioe)
{ System.out.println(clientPort + " ERROR reading: " + ioe.getMessage());
server.remove(clientPort);
stop();
etc. Please advice why the readLine() method hangs; does not read data from the input stream received from the CLIENT?

Viewset does not have data passed from GenIL

Hi All,
We have a custom component in which data is not getting passed from a ViewSet to the Overview page. The details of the issue are given below:
There is a detail view zsoEF and a table view zsoChild. These 2 views are housed in a viewset zsoVS. This view set has an event Eh_OnBack which requires the data from views zsoEF and zsoChild to be passed to overview view zsoOV.
We recently upgraded to CRM 7.0. After the upgrade, the values entered on the views zsoEF and zsoChild are processed in the ZGenIL. The context nodes and the custom controllers are filled correctly with the screen values and some auto added data based on validations..
When we click on the Back button, then Eh_OnBack does not have data in the Custom Controller. I am not able to pin point the reason for this missing data in the Back event. From the way i understand, when we do data binding in the views, we don't have to do that in ViewSet. Has there been any change in this design in CRM 7.0?
I would like to know if there is any workaround for this issue.
Thanks,
Rini

Hi Rini,
Did you try to bind the context nodes with the component controller. Can give it a try whether it resolves the problem. Any way it is difficult to say anything as we don't have an idea what exactly you did in the component. Lets take it forward. In the mean time have a look in the below link.
History navigation and context initialization calls - CRM - SCN Wiki
Thanks,
Javed.

0EC_PCA_3 does not return data in RSA3 if the target system is entered

Hello all,
Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
Datasource 0EC_PCA_1 works fine for the same target system.
There is one thread dealing with the same problem but the person does not provide the solution he found.
Does anyone know what the issue is?
Regards and thanks,
József.

The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Ipod does not power up unless plugged in

My ipod touch does not power up unless plugged in or connected to the computer. It is fully charged and when I unplug from the power outlet or computer it will stay on for a minute and then turn off again. It only shows the apple icon when I try to turn it on unplugged and then turns back off.

Likey the battery is dead.
Try the following to rule out a software problem
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

My network goes off and does not come back unless I switch off and switch on

I have a vodafone connection.
Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???

I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)

JDev 11.2.1 Commit button does not save data

I am using JDeveloper 11.1.2. I am having trouble saving updates to the database. I am trying to create an application that displays database records in a form, allows the user to modify data in the form and them saves that data to the database. I have successfully created the database, entity objects, view objects and application module. I created the form on the page by dragging the data control on to the page. I used the same method to create a table from the same data control. I included a submit button on the form. I dragged the create, delete and commit buttons onto the form. This application gets the data from the database, the user modifies it, select the submit button. This displays the change in the table. I can do the same with create and delete. However, I use the commit button to write the data to the database but it never happens. I have set up logging with –Djbo.debugoutput=console. I can see that the delete button {#bindings.Commit1.execute} is doing something but no change is made to the database.
Thanks for your help, Steve

I have had some success. I tested with the BC browser in my application and got the same results, no update. So I created a new application. I used the 'Create Business Components from Tables' option to create a set of Entity objects, Entity View objects, and Query View objects. The interesting thing I found was that when running the BC browser and trying to update the database using an Entity View object I had success. Was able to add and modify records and results saved in db. However, when I use the browser and try to do the same thing using a Query View object I get the behavior I've been seeing all along, it looks like it is working but not data saved to the database. In order to make the Query View object updatable in the browser I had to make all of its attributes updatable 'Always'. this made the view look updatable in the browser but no save. In my real application I did not have any Entity View objects. the Query View objects look the same so I didn't create any Entity View objects. So I want back to my real application, removed all Entity objects and Query View objects, recreated them with the 'Create Business Components from Tables' option. I created Entity View objects this time. When I drat a data control based on an Entity View onto my page I can make updates and the commit works.
I'd like to understand the difference between the Entity View objects and the Query View objects. Once they have been created I have a hard time telling them apart. The Entity View object for the Employee looks very much like the Query View object for Employee. There are some flags set differently and the Entity View object 'Entity Objects' tab shows the Employee table selected. I can tweek the Query View to look like the Entity View but it still does not behave the same, the commit does not save data.
Thanks for all the help, Steve

NI Spy does not capture data unless I am in VB debug mode

Similar Messages

Maybe you are looking for