NI TestStand 2010 Installer not found

Hi,
I am trying to deploy a TestStand system but it keeps saying
Insert the CD or browse to the location where the following component is located:
NI TestStand 2010 Installer.
The last directory this component was found was:
C:\Documents and Settings\smcmahon\Desktop
I have inserted all four labVIEW 2010 CD's 1/3, 2/3, 3/3 and Devices and drivers. 
I also tried downloading TestStand2010Patch276751 and TestStand4.0.1f1Patch236977 to see if these would fix the issue, whcih they did not.
I suspect that I have downloaded an update to the desktop, unfortunately I recently erased all my downloads and cleared my desktop.
Does anyone know what file I need to download?
Thanks,
Sean

Hi Sean,
Thanks for using the NI Forums!
The reason you are seeing this error message is due to the TestStand engine not being cached on the PC. What I would recommend is to download TestStand 2010 evaluation ( https://lumen.ni.com/nicif/us/teststand3/content.xhtml ) if you do not have the installer discs or from ni.com/src if you are entitled to the files. The patch applications will only contain the patches rather than the full installers.
When you try and build the installer, browse to the location of the downloaded TestStand installer.
Please let me know how you get on!
Ashish Naik
Field Sales Engineer
National Instruments UK

Similar Messages

  • Document splitting: Items for clearing 0010/100062508/2010/001 not found

    HI Gurus,
    I hava issue with FC valuation. I have done configurtin for FC Valuation of GL A/c i.e, Long Term loan paybles which is created as Open Item management.
    It is working fine post the entries at the end of May and reversed  the same on 01.06.2010 in development system. i have moved saem request to Acceptance client and testing the same scenario.  But i am getting the following error.
    "Document splitting: Items for clearing 0010/100062508/2010/001 not found
    Message no. GLT0002
    Diagnosis
    Document splitting cannot perform clearing because it was not possible to find complete splitting information on the items to be cleared (company code 0010, document number 100062508, fiscal year 2010, item 001).
    System Response
    Clearing cannot be performed and the document cannot be posted.
    Procedure
    Exclude the affected item from clearing.
    It may be that this item was not posted with active document splitting. In this case, this item or document would have to be migrated."
    I have checked the docuemnt splitting config . In two systems it was same and doc.splitting was configurated very long back.
    Could any one help on the above error
    Thanks in advance
    PAVAN

    Hi Pavan,
    Please note the following, the error GLT0002 is normally caused by a change done in your customizing for splitting. Since you mentioned that this is happening for one company code, it seems to be that one change was made only for this company code in your SPRO settings.
    For example if you have activated open item managment subsequently on account or another example would be that you posted document prior to activation of document splitting.
    Please see section 5 of note 891144:
    Items posted while open item management was still inactive in G/L account master data cannot be cleared after open item management has been activated subequently if New G/L document splitting is active.
    Therefore, if document splitting is active, open item management should never be activated subsequently on accounts to which documents had already been posted with inactive open item management.
    Review note 891144 in full. I believe that this will help you resolve the issue.
    Best Regards,
    Vanessa.

  • Sap Tutor Installation error "target installation not found"

    Hi All
    I am getting an error when ever i am installaing SAP tutor full in WIN2K3 saying that
    "Target Installation Not Found"
    But when i am installing on windows XP there was no problem.
    Please suggets
    Sudhakar A

    Dear Sudhakar,
    You downloaded patch of tutor not SAP Tutor for this reason you are receiving this error message.
    Download SAP Tutor from https://websmp201.sap-ag.de/~sapidp/011000358700001572552002E
    Regards,
    Nikunj Thaker

  • 1.4 plug-in installer not found during auto download

    HISTORY: My functioning Windows 1.4.1_03 applet with a Linux web page properly downloaded the plug-in installer when none was present on the client approx. 2 months ago.
    PROBLEM: The same web page now fails on a Windows client with out a plug-in previously installed, when attempting to download the installer.
    I tried this on multiple clients and with multiple servers.
    I get the same result when the 1.4.2 htmlconverter.exe is used (as it produces the same code). When I manually download and install the 1.4.2 plugin from the Sun plug-in web page, the About version is 1.4.2-b28 (the installer sought after below is 1.4.2_01-b05).
    QUESTION: Are you loading and running this installer sucessfully?
    ROOT CAUSE(?): Sun installer is unavailable due to virus attacks or more likely the installer file has been misplaced on Sun web page, OR the wrong installer name is being sent to the browser.
    WORKAROUND: Download and install the plug-in manually (unacceptable for customers).
    CODE: (company specifics removed, behaves identically)
    <html>
    <head>
    <OBJECT
    classid = "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    codebase = "http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0"
    WIDTH = 0 HEIGHT = 0 >
    <PARAM NAME = code VALUE=com.dummy.anApplet >
    <PARAM NAME = "type" VALUE="application/x-java-applet;jpiversion=1.4">
    <PARAM NAME = archive VALUE=some.jar,another.jar>
    </OBJECT>
    </body>
    </html>
    OBSERVED BEHAVIOUR:
    1) The plug-in download dialog appears: "
    Security Warning
    "Java Plug-in 1.4.2_01" signed on 8/14/2003 by Sun Microsystems ...
    [Yes] [No] [More Info]
    2) Click Yes. The following dialog appears:"
    Server Problem
    The server has not found anything mathcing the requested URI (Uniform Resource Identifier). [OK]"
    3) Click OK. The following dialog appears:"
    Error - Java(TM) Installer
    Unable to download http:''java.sun.com/1.4.2/1.4.2_01-b05.xml for installation. [OK]"
    4) Returns to applet page with no plugin installed and applet is not running.

    I see some differences between your <object> definition and mine.
    codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,03">
    <param name="type" value="application/x-java-applet;jpi-version=1.4.2">Notice that you are missing the dash in "jpi-version".
    I have working fine.
    Hope this helps.
    Adolfo

  • SAP BPC 7.5 SP6 on Win 7 x64bit & MS Off 2010 - Path not Found errors

    Hi,
    We have currently started a test group of 16 users to test Win 7 before migrate the entire company. Some of the test users are in Accounting and they use SAP BPC 7.5 for their Budget and Forecasting. We have Win 7 x64 bit and MS Office 2010 installed. For one user, after logging into the Production server for BPC he opens the report library and he is unable to get certain macros to allow for different changes within the excel spreadsheet. For example, there is a section that asks him to change the company name. When he clicks on the field to do so it says "Path Not Found".
    Another user when he tries to open up a report, he gets "Loading Dimension information..(Customer)" then a popup comes and says File not found. We have tried to uninstall and reinstall BPC on the new machines to no avail.
    Any help you can provide would be great. If more information is needed, please let me know.
    Thanks,
    Lakiasha Walker
    IT Security Administrator

    Hi Lakiasha,
    Could you re-install .NET 2.0, .Net 3.0. .Net 3.5 framework on the machines and check the results.
    I guess you may need to upgrade your BPC server as well as client version to SP8 ( minimum) to work with MS office 2010.
    Regards,
    Deepak Kori

  • TestStand 2010 Deployment not including TestStand VIs in deployment

    Hi all,
    I have a question about a deployment I am trying in TestStand 2010, having just recently upgraded from 4.2.1. I was building a particular deployment with no issues in TS 4.2.1, using LV 2010. The VIs in the project use the TestStand Get/Set Property VIs quite a bit, and in the 4.2.1 support VIs directory, you can see them there.
    However, using the same deployment configuration, I tried to build the deployment in TS 2010. This deployment didn't have any of the TestStand VIs which were present in the 4.2.1 deployment. As a result, VIs that call the TestStand VIs are reported as broken. Note that the VIs were created while I was using 4.2.1, so the TestStand VIs are for that version (it has never been an issue for previous upgrades, however).
    Recap:
    TS 4.2.1, LV2010 - Deployment works fine
    TS 2010, LV2010, using same deployment configuration file - Deployment broken, no TS VIs included in support VIs
    Ideally I'd like to sort this out at a deployment level, rather than employ any workarounds. Is there a difference in the TS 2010 and 4.2.1 VIs? Or am I missing something glaringly obvious?
    Any help is greatly appreciated!
    Thanks,
    Rob
    Rob Greene,
    ATE Engineer,
    Benetel Ltd.

    Rob,
    I tried a small demo using TS2010 and LabVIEW 8.6.1 (only have this on my system at present)
    When I created my deployment image, I open the LLB that was created and present in the LLB was TestStand - Get Property Value (Number).vi.
    I then changed one of the options in the LabVIEW VI Options dialog so that I excluded files from VI lib and then rebuilt the Deployment image, TestStand - Get Property Value (Number).vi was missing, as expected.
    So It seems to be working for TS2010 and LabVIEW 8.6.1.
    Can you check that you haven't got any options selected that are excluding files.
    Regards
    Ray Farmer

  • AIR Installer Not Found

    I recently attempted to install an AIR application, but got the error message "This application requires an update to Adobe AIR but download of that update has failed".  I tried numerous times, but always the same error.
    I'm now trying to reinstall AIR, but whenever I try to run the installer (from the desktop, My Documents or wherever) I get the error "Windows cannot find 'C:\Users\(my Windows username)\Appdata\Local\Temp\AIR(4 random characters).tmp\Adobe AIR Installer.exe'. Make sure you typed the name correctly, and then try again".  I've checked that file location and the folder exists (presumably extracted by the installer), but no "Adobe AIR Installer.exe" - just "setup.msi", "setup.swf" and a folder called "Adobe AIR".  No matter where I run the installer from or with what permissions, it still throws the same error. I am using Windows 7.
    Any help would be greatly appreciated.

    Hi Dave,
    Probably the application you are trying to install has an obsolete namespace like 2.0beta/2.0beta2 or it has a higher namespace(not public yet).
    Could you just follow these steps:
    1) Copy the AIR file you are trying to download locally somewhere
    2) Change its extension from .air to .zip
    3) Extract it.
    4) Open the file META-INF\AIR\application.xml
    5) There would be a line of the sort:
    <application xmlns="http://ns.adobe.com/air/application/1.5">
    Could you just copy this line of your application.xml here?
    Also, which is the AIR version you are trying to download? Did you try downloading the latest AIR 2 available at:
    http://get.adobe.com/air/
    - Neha

  • Flashplayer-installer not found

    i have downloaded flashplayer 10 for linux debian then unzipped and untared it bu the sript-shell "flashplayer-installer" is not present (only libflashplayer.so is present in the directory) so that i can't install it. Can you indicate me where i can find it?

    Hi Dave,
    Probably the application you are trying to install has an obsolete namespace like 2.0beta/2.0beta2 or it has a higher namespace(not public yet).
    Could you just follow these steps:
    1) Copy the AIR file you are trying to download locally somewhere
    2) Change its extension from .air to .zip
    3) Extract it.
    4) Open the file META-INF\AIR\application.xml
    5) There would be a line of the sort:
    <application xmlns="http://ns.adobe.com/air/application/1.5">
    Could you just copy this line of your application.xml here?
    Also, which is the AIR version you are trying to download? Did you try downloading the latest AIR 2 available at:
    http://get.adobe.com/air/
    - Neha

  • Voucher not found in local voucher store.

    I am testing Flash Access 2.0.
    I have some error ouccured the falsh player masage is
    Starts to get video metadata at Mon Oct 25 18:04:44 GMT+0900 2010
    DRMContentData received on Mon Oct 25 18:04:44 GMT+0900 2010
    authenticationMethod = anonymous
    ServerURL = http://localhost:8080
    license ID = 60F0CF7D-D0A3-XXXX-XXXX-XXXXXXXXXXXXXX
    Local voucher...
    Load local voucher complete event received on Mon Oct 25 18:04:46 GMT+0900 2010
    voucher not found in local voucher store.
    DRMErrorEvent dispatched by DRMManger received on Mon Oct 25 18:04:47 GMT+0900 2010
    event type = drmError
    Error Code = 3305 [ServerConnectionFailed]
    Sub Error Code = 404
    Error Details =
    drmUpdateNeeded = false
    systemUpdateNeeded = false
    I followed all the steps on FAXS_2_0_Quickstart.pdf
    and here is my cross_domain.xml
    <?xml version="1.0" ?>
    <!DOCTYPE cross-domain-policy (View Source for full doctype...)>
    - <cross-domain-policy>
    <allow-access-from domain="*" secure="true" />
    <site-control permitted-cross-domain-policies="master-only" />
    </cross-domain-policy>
    I want get feed back ASAP.
    thank you for your time

    Thank you for response.
    but I still have a problem.
    I am using the  "License Server for Protected Streaming" and I tested http://localhost:8080/flashaccessserver/flashaccess/license/v1. the message showed "License Server is setup correctly".
    When I made "demopolicy.pol" using sample java program "CreatePolicy.java", I changed "AuthenticationType.UsernamePassword" to "AuthenticationType.Anonymous". Did it cause the DRMError ploblem? 
    policy.setLicenseServerInfo(new LicenseServerInfo(AuthenticationType.Anonymous));
    Error Massage :
    Load local voucher complete event received on Mon Oct 25 18:04:46 GMT+0900 2010
    voucher not found in local voucher store.
    DRMErrorEvent dispatched by DRMManger received on Mon Oct 25 18:04:47 GMT+0900 2010
    event type = drmError
    Error Code = 3305 [ServerConnectionFailed]
    Sub Error Code = 404
    P.s.
    Tomcat dir is C:\Tomcat6
    and also my licenseserver is located in C:\Tomcat6\licenseserver\flashaccessserver\tenants\sam\flashaccess-tenant.xml
    Thank you for your time.

  • OIM 11g installation: oim-config.xml was not found in MDS Repository

    Hi,
    I just installed Oracle Identity Manager 11g (the latest version) on out test system. The installation worked fine. I can start the admin server as well as the soa_server. But when I start the oim_server1, the deployment of oim fails with the following error message:
    ####<Aug 18, 2010 3:33:22 PM CEST> <Error> <Deployer> <oim11g> <oim_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1282138402834> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.platform.utils.OIMAppInitializationException:
    OIM application intialization failed because of the following reasons:
    oim-config.xml was not found in MDS Repository.
    Unable to find keystore "default-keystore.jks" in <DOMAIN_HOME>/config/fmwconfig/.
    Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
    Password for OIMSchemaPassword is not seeded in CSF.
    Password for xell is not seeded in CSF.
    Password for DataBaseKey is not seeded in CSF.
    Password for JMSKey is not seeded in CSF.
    Password for .xldatabasekey is not seeded in CSF.
    Password for default-keystore.jks is not seeded in CSF.
    Password for SOAAdminPassword is not seeded in CSF.
    oracle.iam.platform.utils.OIMAppInitializationException:
    OIM application intialization failed because of the following reasons:
    oim-config.xml was not found in MDS Repository.
    Unable to find keystore "default-keystore.jks" in <DOMAIN_HOME>/config/fmwconfig/.
    Unable to find keystore ".xldatabasekey" in <DOMAIN_HOME>/config/fmwconfig/.
    Password for OIMSchemaPassword is not seeded in CSF.
    Password for xell is not seeded in CSF.
    Password for DataBaseKey is not seeded in CSF.
    Password for JMSKey is not seeded in CSF.
    Password for .xldatabasekey is not seeded in CSF.
    Password for default-keystore.jks is not seeded in CSF.
    Password for SOAAdminPassword is not seeded in CSF.
         at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAppInitializationListener.java:145)
         at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Has anybody seen this error before or knows how to fix it? Thanks for your help in advance!
    Best regards
    Tom

    This also solved my issue. If you can backup the .xldatabasekey file before you reinstall this will allow the OIM application to read the OIM database. I was successfully able to run rm -Rf and wipe my entire Middleware directory. Then I reinstalled ALL of OIM and SOA back to the same VM. I saved the .xldatabasekey file before hand and dropped it right back to the same folder before I ran the rm -Rf command later after the OIM Domain was installed. Finally, as mentioned above, I logged into EM and found that I needed to add the .xldatabasekey "password" and simply used the same password that I entered during the OIM configure steps for the keystore. Remember the .xldatabasekey password IS NOT the xelsysadm password, but the KEYSTORE password. They are different. I am now able to log into OIM and I can see all the pre-existing users. Thanks for the help!

  • The TestStand Engine cannot be initialized. Path not found.

    Hi, up until now i installed and removed TestStand 3.5 3 times in a row, just to always get this message (see subject) when i try to start the Sequence Editor. I even uninstalled all NI-Software i had on this laptop to reinstall the whole package... Nothing worked. Now i wonder, is there anything i am doing wrong ? What can i do to get TestStand running ?
    Well, on that message when i hit OK, another message
     The sequence editor cannot start up. Unable to create the TestStand Engine.
     Hitting OK on that message again just terminates the sequence editor leaving me with a blank screen.
    Any ideas whats wrong ?
    best regards and thanks in advance,
    Ingo
    Solved!
    Go to Solution.

    Ingo -
    Sorry for your frustration. Your idea to uninstall and reinstall should typically work. The second message is just a result of the first error, so we need to figure out what path is not found, and it is unclear why this is occurring. I tried to force my copy of TestStand 3.5 to fail in a similiar way by messing around with the installation and I could not find a way to cause the "Path not found" error. I got many other more detailed errors, but I have been unable to duplicate your message.
    Some questions:
    1) What operating system are you using?
    2) Are you installing to the default location under Program Files? Are you using a network path in any way?
    3) Do you have write authority to the the installation locations on you system?
    4) Are you logged in as an administrator when installing, restarting, and launching the sequence editor.
    5) Have you manually messed with any of the registry settings under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\TestStand\3.5, where something is incorrect?
    6) Have you added any User components under the TestStand directory that might somehow load and cause an issue?
    If you currently have an installation on the system, you could quickly try to clear out the Cfg directory under TestStand, so that it generates new copies of these files.
    Message Edited by Scott Richardson on 11-20-2008 12:38 PM
    Scott Richardson
    National Instruments

  • TestStand 4.2 Error String not found in language resource files

    I've installed TestStand 4.2 on two Windows XP machines.  On one machine it worked fine first time. On the other machine I receive the following message in the login box, and also in the templates pane:  'String not found in language resource files." I have tried uninstalling and re-installing TestStand twice but still get this error.  This error prevents me being able to login as an administrator so I am unable to use TestStand 4.2. I understand that these language resource files are provided by the installer but for some reason it seems that the machine with the error cannot locate these.
    The only difference between the two XP machines that I can find is the location of user profiles.  I note that on Vista compatible TestStand versions that TestStand user settings are stored to C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all user profiles are stored under C:\profiles, rather than C:\Documents and Settings.  This is the standard profile used by our company so I am unable to change this. The TestStand installer does recognise this and installs TestStand user settings to  C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\.  Does anyone know whether the location of the user profiles is important, or whether there is another cause for this error?
    Regards,
    David
    Solved!
    Go to Solution.

    Hi Scott,
    I've held off on the changes suggested by John for now.  You are correct in that the knowledge base article referenced by John does not apply since the engine does initialise. 
    I've attached two screen shots.  The first one is the standard login box which displays the "String Not found in language resource files" message in place of the usual "administrator" user name.  If I overwrite the  "String Not found in language resource files" user name with "administrator" and click OK to log in then I get an "Invalid User Name" error dialogue box. Therefore I am unable to log into TestStand.
    The second screen shot shows the TestStand sequence editor with the String Not found in language resource files visible in the templates pane.
    Regards,
    David
    Attachments:
    TS Login Prompt.JPG ‏11 KB
    TS Seq Editor.JPG ‏75 KB

  • Exchange 2003 to 2010 Migration Mailbox Migration "Object not found"

    I am introducing an Exchange 2010 Server to a single server Exchange 2003 organization. I have HT, CAS and MB roles installed already on 2010 w/ SP1. Prepped the Schema, AD, Domain and LegacyExchangePermissions by using the setup.com of the SP1
    installation files.
    Right now, when I try to initiate a New Local Move Request on 2010 EMC for a mailbox on Exchange 2003, I get an error for all the users saying "Object not found" with a white X in a red circle. I'm not sure what to do at this point to get Exchange 2010
    recognize the 2003 mailboxes. Any ideas?
    Thank you,
    -S

    Tim,
    Here is what I'm getting from ExBPA:
    Error Offline address book replica not found Organization CGU Didn't find a replica of folder 'OAB Version 4' for offline address book 'Default Offline Address List'. Either a replica doesn't exist, or this folder hasn't been created yet. If an OAB generation
    attempt has not yet been made, you can ignore this error.
    Error Couldn't find any writeable domain controllers Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) There were no writeable domain controllers found in Active Directory site 'Default-First-Site-Name'. At least one writeable domain controller
    is required for Exchange to function properly.
    Error Database backup critical Admin Group Exchange Administrative Group (FYDIBOHF23SPDLT) Database 'Public Folder Database' on server EXCH-2010 has never had a full online backup.
    ====
    And this is what happens if I put go ahead with the move request
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:00:00
    Test User
    Failed
    Error:
    Mailbox database "EXCH-01\First Storage Group\Mailbox Store (EXCH-01)" doesn't exist.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.Ex23B42B
    Exchange Management Shell command attempted:
    'cgucpa.com/Users/Test User' | New-MoveRequest -TargetDatabase 'Mailbox Database'
    Elapsed Time: 00:00:00
    Thank you for your help,
    -S

  • Error : file not found in SharePoint 2010

    I have a problem of error "file not found" in a site collection SharePoint 2010.
        I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
        I can access to the page of "all content"
        I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
        I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
        I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
    How could I check the master page? Or this problem has other solution?
    Thank you in advance.

    You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
    UPDATE - Can you configure the web.config to display the detailed error? Make -
    <CustomErrors Mode="Off">, CallStack="true" and
    <compilation debug="true" />
    Do an IISReset and then refresh the site.

  • Network card not found after new installation [SOLVED]

    I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
    dhcpcd: eth0: interface not found or invalid
    although network connectivity (wired and wireless) worked perfectly before the installation attempt.
    This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
    I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
    I should say, the device is there and working:
    lspci | grep Net
    gives
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    I also did
    modprobe ath9k
    just to make sure. No luck.
    Any help will be appreciated.
    thanks
    thea
    Last edited by thea (2012-07-23 23:59:16)

    Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
    But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
    and it does not sound encouraging for the kernel you have there.
    The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
    If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
    Beware that the ones from July dont have the AIF setup anymore.

Maybe you are looking for