NI-Update after Installing LV2012 asks for 12,5GB of updates?!!!

Hi all,
got my yearly NI Installation package these days and installed the SW of my DevSuite Ds2 Test Edn.
This installed LabVIEW & Teststand and some Toolkits of 2012. After Newstart the NI Update Service checked for Updates and now wants to download 12.5 GB of data, amoung is > 550MB of patches etc.
JUST AFTER INSTALLATION OF FRESH SOURCE DVDs?
For all the drivers I'll try to install from the driver DVDs first and run Update Service again.
IN ANY CASE: Those amounts of downloads will block even a DSL line for days, not to ask for having to run my PC overnight in this period as well!
Quite disappointed!
Solved!
Go to Solution.

Update Service displays patches, but also upgrades and service packs for any software you already have installed. The upgrades and service packs, which indeed are usually pretty large, also ship on our Developer Suite, Device Drivers, and any DVDs that come with new hardware. Update Service is just another delivery tool you can choose to get your software updates. Obviously, I do recommend installing the patches, which are typically small. Each patch's update description links to a web article with more information about the patch, so you can determine which patches apply to how you're using the software and only install what you need. We by no means want to block your DSL, just offer you another way to receive the upgrades and patches you're entitled to.
Thank you for your feedback, and please feel free to let me know if you have any additional comments or suggestions for NI Update Service.
LaRisa Mohr
Staff Product Support Engineer - NI Update Service
National Instruments R&D

Similar Messages

  • Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    I have had about 9 iOS devices at work do this. 
    The fix and it will wipe out anything on your iphone is to connect it to your computer and have the latest version on iTunes open.  Hold the Power/Sleep and Home button till it blanks out.  Keep holding the home button untill it says recovery mode on the screen of the computer and do a restore.

  • How do I install apps without sharing my credit card information, when I press install it ask for my apple ID I put it in and after it says to review my iTunes account

    How do I install apps without sharing my credit card information, when I press install it ask for my apple ID I put it in and after it says to review my iTunes account

    Click the none option for your credit card when you review your apple id

  • Why every time when im going to install games that cannot be installed and asking for newest version of iphone software, how can i upgrade newest version of iphone software?

    why every time when im going to install games that cannot be installed and asking for newest version of iphone software, how can i upgrade newest version of iphone software?

    Plug your phone into your computer running iTunes. Click on the phone in the left pane of iTunes. Click the "Check for Updates" button on the right.
    If you have a 3G, the highest you can go is 4.2.1.

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • After installing iOS 8 for my iPad all my PDF files in iBooks disappeared.

    After installing iOS 8 for my iPad Air, all my PDF files in iBooks disappeared.

    Did you back these books up to your computer before updating to iOS 8? It is always suggested that you back everything up before updating, so if something goes wrong, you can easily put them back on.
    You should just be able to plug the device into the computer you sync to and they should sync as long as you have "Sync Books" ticked in the books section.

  • How do creative cloud apps get installed without asking for administrator?

    The title says it all but I'll reiterate. How do CC apps downloaded with the Creative Cloud desktop app get installed without asking for administrator user/password? Its the sam on both Mac and Windows and I don't understand how its doing it. This seems like a security hole to me.

    JscottCMD are you installing the Adobe Creative applications with a Creative Cloud Individual subscription?  If so please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the applications and updates included with your membership.

  • After installing Mavericks, office for mac 2008 doesn't work properly

    After installing mavericks, office for mac 2008 is slow, unresponsive a lot of the time, and slows my whole mac down if i want to do other things at the same time. Is there a solution that doesn't involve spending loads of money on a newer version of office for mac?

    All Good. Are there any pending updates for MS Office by chance? Just check under the Help menu in the top Menu when you open Word.
    I highly recommend you to reinstall the latest Office 2008 update > http://www.microsoft.com/en-us/download/details.aspx?id=36897 Note that Office 2008 is not supported by Microsoft anymore (thanks Mende1 for the link)
    Pete

  • I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

    I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

    Contact Adobe support:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Can't start Tomcat after installing Bea WorkShop for JSP

    Hi,
    I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.

    I installed BEA Workshop for JSP Version: 3.1.0
    Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
    Thanks for your assistance.
    Ron

  • After installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable

    after installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable what should i do ???

    Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

  • HT5654 my ipad is not working i just install a software update  after that it ask for restore ipad when i did that it show error 3194?

    my ipd is stop working after i install a software updates it ask for restore ipad when i did that it show error 3194?

    savvyfromvic wrote:
    ...  error 3194?
    Please see the  More Like This  section on the right.
    Also... see item 3 Here  >  Community etiquette

  • RAW 5.02 update installed without asking for admin creds

    I was prompted to install this update while logged in to a non-admin account.  I went ahead, but it never asked me for admin credentials which I thought was odd.  Is this correct behavior? 
    I did check disk permissions and nothing showed up.
    Regards, Patrick

    At least in OS X Mavericks, you are not asked for the user account password when you install OS X updates from Software Update. This does not happen if you download and install the updates from the Apple website.
    If you want to be asked for your user password, send the idea to Apple > http://www.apple.com/feedback

  • Updated ipad3 settings. after 'done' it asked for passcode. I never had a passcode. how to fix?

    I updated Ipad3 Settings. After the Done message, it said I was locked out and asked for a Passcode. I never had a passcode. How do I fix this?

    Do you mean you updated to IOS 7 and now you are being asked for a password. If so, at the end of the upgrade process I was asked to set a PIN number. You probably gave a PIN number and that would be your password.

  • After Waves install, Logic asking for serial number unless xsKey plugged in

    I installed Logic Studio and have been using it without dongle. After installing Waves Gold bundle and going through super paranoid copy protection maneuver, Logic now needs the xsKey dongle to run. Otherwise it asks for new serial number, then the original SN, which is of course the xsKey you must insert to proceed.
    Does anyone know what needs to be done to correct this, short of dumping the Waves stuff and starting all over again?
    Help!

    It's unlikely to be Waves related I think. I'm running iLok Waves plugins here in LP8 without my XSkey connected. Waves has nothing to do with the XSkey, it either uses hard disk authorisation (old plugs) or iLoks (current plugs).
    It sounds to me more like the Logic installation is screwy, if it's forgotten it's authorised. Try running some disk utils and verifying permissions, and if no joy, rerunning the Logic install and reauthorise.

Maybe you are looking for

  • Problems with frontend

    Hi friends! I'm trying to save a web template (WAD 7.0 support package 0 revision 277) and it fails. The error message is: RSBOLAP             000   Program error in class SAPMSSY1 method=UNCAUGHT_EXCEPTION RS_EXCEPTION    000   an exception with the

  • Hi how to set filters in ALE idoc and types of filters

    Using filters how we can validate data? what are the mandatory fields to set filters pls give me solution ravi

  • How to fix the ipod touch

    I have problem charging with it    

  • HPCM - Manage Database not creating outline in Essbase application

    Hi, I've created the HPCM application from EPM 11.1.2.1 and I have also created the Stages, POV , Drivers and assignments but I cannot do data entry since the Essbase cube outline itself is not created. I've gone to Manage Database -> "Deploy Now" se

  • Error in Data Column

    Hi, I have created Generic data Source based on ~Infoset Query and called the schdeule the data in BW... I am getting the error in the Column in the report.... without message.. it says errior and gives the grand total.. Can any had face same sort of