NI Update Service 2.1.0.103 recommends installing LV 2012 f1 patch over later version

Reporting this to NI support people as a possible bug: NI Update Service 2.1.0.103 (which came on the Aug'12 Dev Suite discs) still recommends the LV 2012 f1 patch as an urgent update, even after I installed the f3 patch.
Solved!
Go to Solution.

It's recommending the FPGA patch, not the LabVIEW core patch.
Chris M

Similar Messages

Service Station closes after starting after install of 3 Toshiba patches

Hello there,
there was recently a "patch day" in Toshiba Service station. I believe from my memory the patches came out earlier but I installed them on 23 april 2010. There were three patches and as far as I can reconstruct from the system recovery it were:
- BIOS flashing
- HDD/SSD Alert patch
- HDD Recovery patch.
So, besides that I had problems getting the BIOS flashing patch to run, eventually succeeded by extracting the installation files to a different location and run it with administrator rights.
My problem is, that after this patch session, my Toshiba Service Station does not start up any longer. When I start my system, after logging on it seems to start up but then always closes again with the windows error report saying "stopped working" and that's it. I am not sure of which patch this could be. Also I believe that one of these patches said in the description that it will update Service Station itself?! I downloaded Service Station from the Toshiba Website but it will not turn out to the better, doesn't matter if I uninstall it before, start the installation with administrator rights or not.
My system is Satellite A500, Windows 7 64bit.
I hope you can help. Unless I cannot access updates any longer!
Note: Some days before I installed a graphic's driver for my Nvidia GT 230m FROM THE NVIDIA WEB SITE. Why did I do so? I experienced literally HOURLY an unwanted system restart and as I can see from the problem report it was always due to the graphic's driver. In the following I installed the two patches from the Toshiba Website, the older and the newer but the problem persisted. Luckily at some day I recheched the Nvidia website and there was a new driver.
Although it said BEFORE (not now any longer) that this graphic card should rely on a manufacturer driver, I nevertheless installed it because it coulnd't become worse. The positive thing is, that I had not a single system crash until now even if I leave the laptop switched on for hours.
I am not quite sure if the problem with Service Station started right after this graphic driver installation, but it can't be because I installed the three patches mentioned above THROUGH Service station some days later.
But it might have affected the software after these patches? I am not sure.

Hi
Simply said; Toshiba Service Station crashes and new installation of this tool didnt help.
Right?
Well, because you are not sure whats wrong and according to the posting, you have got some other problems related to the software, I recommend to recover the notebook using the HDD recovery option!
This will set the notebook to factory settings.
Of course you should backup the data if you have important files.
Run HDD recover and after that check how the notebook would functions!

BBC iplayer says Adobe Air needs updating: Adobe Air will not install, but says I have a later version already on my PC!

Use Firefox. Have BBC iPlayer which will not load, saying I need a newer version of Adobe Air: when trying to instal Adobe Air, get message saying I already have a more recent version. It worked when I was using IE, but not since changing to Firefox.

Hi there,
stumbled on this conversation after having problems myself.
After lots of trial and error, I was finally able to install iPlayer on my MacBook Pro.
Firstly remove Adobe Air (Applications, Utilities, Adobe Air Uninstaller).
Reboot (not sure if it is needed but it is what I did).
Download Adobe Air 2.5 from http://kb2.adobe.com/cps/853/cpsid_85304.html
Then retry installing iPlayer from the BBC webpage. I ignored the prompt from Adobe Air to upgrade to the latest version (3.1).

Mac OS X Server v10.6.6 Software Update Service Host Older Updates?????

Is there a way to manually add older software updates to the software update service?
My issue started out like this. I would click change version beside both Mac OS X update/combo update v10.6.6 and select v10.6.5 because I want to push the older version. When I clicked save the check marks went away on those two items. I then figured I would refresh everything by renaming /var/db/swupd/http to /var/db/swupd/http-old and /etc/swupd/ to /etc/swupd-old. I restarted the service and all of the files were recreated and updates were downloaded but now when I click change version the older version is no longer available. Keep in mind that I still have the old folders so I can always go back and I can always download old updates from the Apple web site if need be. So if there is a way to manually add older updates hopefully my issue will be resolved. It was written in the description of Mac OS X Server v10.6.5 that a new feature was available that allowed hosting older updates but I can't find instructions on how to do so.
I welcome any takers. Thanks in advance!

I understood the older version only being able to be hosted/downloaded when they come available, but were updated on SUS due to a bug or something, so as far as I understood, apple wont let you host that VERSION of that file again, unless you had it before.
Essentially, they only allow sus to download the last version of it, if you had the one before the last version, you could keep it. I could/might/usually am wrong though.
my 2 cents

Could not find a part of the path 'C:\Program Files\Update Services\Schema\

clean SC 2012 R2 RTM.
1. had problems with WSUS installation/post configuration
2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
I followed the suggestion: reinstalled WSUS using ps and wsusutil.
I canceled WSUS configuration at recommended step. Everything looked fine.
But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
Any suggestions for fixing this.
Thanks.
Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

>Any Errors in SUPSetup.log and WSUSCtrl.log log files?
No errors in these files. As I mentioned there is no Schema folder in Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~
Here are 3 repetitive errors in WCM.log:
1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
2. Failed to publish client with error = 0x80070003
3. HandleSMSClientPublication failed.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Error: Flash Player "Adobe Flash Player Update Service 11.3 r300 has encountered a problem ..."

I get the following message as soon as I boot up my PC:
"Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience."
Anyone else experiencing the same problem?
According to Adobe, this is the first time they've heard of this issue.

RE:
23. jbacinti, --Jul 22, 2012 2:30 PM in reply to Carolo43
Unchecking auto updates does not stop the message for me.
Sorry to hear that too. I actually recommended this to a few friends who were having the same issue, and it worked for them.
But, I'm wondering.... Have you tried disabling the check for updates settings in both the (Window's Control Panel's) Global settings manager and the (online) Global Notifications Settings panel? (That's the one on this page -- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l ) On that page, click on the "Globe with the Check Mark" tab and make sure that the box is blank.
Hope this helps.
Ortho_Fan

Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?

After trying many different fixes including uninstalling flash player and unsuccessfully trying to reinstall it, would consistently stop loading at about 57 percent. Either there are remains of registry keys interfering or your site or my computer has been attacked. No malware showing after checking with antivirus. Seen same message on other computers. Had to restore computer to earlier date but lost some contact info in the process in Skype. Possible problem from trying to install internet tv software, but restored to previous point there to. Computer works ok but slowed on internet considerably but message shows continuously daily need a better solution or let your site analyze my flash player. What can I do?
adobeloug

thank you for your info, I did edit the question to show I was using vista (business to be specific). I will try again with some afterthoughts. Will enable Java first. I remember that was a problem in a previous update, I thought that was always running and go through the steps again. I don't feel comfortable messing with the registry and if you can add some advice on how to deal with that safely that would be appreciated also. Thank you so much for your quick response. Also, isupgrade to explorer 10 recommended for vista or is it suppose to accommodate windows 8. I don't want to be a beta tester before they work out all the kinks sincerelyadobelougLou Grubin
Date: Tue, 9 Apr 2013 23:42:40 -0700
From: [email protected]
To: [email protected]
Subject: Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?
    Re: Adobe Flash Player Update Service 11.6 r602 stopped working and was closed?
    created by Prabhuram R in Using Flash Player - View the full discussion
Hi, It would have been good if you had added your OS information. However, if it is Windows, please read the following: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-windows.html. For Mac, check in the following article: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-mac.html Hope the above links helps. With regards,Prabhu
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5221727#5221727
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5221727#5221727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5221727#5221727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

P1i dead after running Update Service - any suggestions

Hi
My P1i appears completly dead after running Update Service. I've tried removing the battery, fully charging the battery etc. When i run Update Service again it just says my phone is up-to-date.
any suggestions?

Unfortunately, in this case, we would only be able to suggest sending the handset for service. Usually when running the Update Service, you should get the option for EXIT but also for INSTALL when you are advised that you have the latest software. If you do not have this, the handset may need to be flashed by an engineer.
If you wish to do this, I'd recommend contacting your local support team to be advised of your nearest service location. Contact details can be found here:
http://www.sonyericsson.com/cws/corporate/common/contact

Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close. We are

I get following message:
Adobe® Flash® Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience.
How can I solve this?

People,
Listen. This service is, has been and seemingly will be: FREE. So while emotions are running on the hot side of the guage, let's remember; it is FREE. Adobe owes no one anything. Now who's to blame, really? We, the people are to blame. Why? Because everyone has been ok with the fact that one company essentially designed and released a technology for streaming from the net. One company. And almost all of us are using this one company's technology to stream; for FREE.
But now we are not ok with it when, after we are prompted to update, we have the issue of it not working? We all never saw the ridiculously high potential for this one company to screw things up, intentionally or otherwise? What the ramifications, that we are now experiencing, might be? Nah, we just took it for granted that we would continue to be served. Well the serve came, everyone. Mistake or otherwise.
It's like this country [US], up until four-years ago. Everyone was either running around with snow shovels and hefty garbage bags to gather all the money they were making or sailing the seas of expectation and an, 'I am out there to get mine' attitude, and then the sh*t hits the fan and now people are complaining? About the very system until four years ago was spoon feeding them poolside with mai-tai's? While it was crushing everyone else in the known world?
No doubt it seems incredulous that a multi-billion dollar company has an IT department that would include in an update, for their own software, that would be inconducive to working. No doubt. But keep in mind: we are all either using browsers by Apple or MS. Anything happens to these browsers, including a virus or anything else that threatens our use of them and...?
So climb off the haughty, 'I deserve' crap and walk on the solid ground of trying to resolve this issue here at Adobe and around the net. If we were to band together, as the 99%, we could solve this, no problem. But then that holds true with resolving this fictitious economic downturn nonsense, that we solidly take for truth at face value, because our mainstream media says so. But no other species on this rock flying through space would know what the f*ck we were talking about.

Remote update service on sony ericsson G502 does not work

I have a Sony Ericsson G502. The phone has a problem which causes it to restart when I am on a call. Sometimes it just restarts on its own. I searched on the net and found that other people have also seen the same issue and I believe a software upgrade will fix the problem.
I dont have the usb cable of the phone so I cannot do the upgrade using the 'Update Service' software from the pc. I tried doing a 'remote update service' from the phone in Menu-->Update Service-->Search for Update, but it just says that your phone is running the latest software. The current software version on my phone is 1203-8254 R1FA031 080512. Is this the latest software available? I have bought the phone 2 years back (but used it sparingly), and I am not convinced that there is no update to this software.
Please suggest a way I can upgrade this phone? I like the phone, but this restart problem makes the phone very unreliable for everyday use. Kindly help.

Your best bet is to get a USB cable and update the software with SEUS on your PC.If, as the remote update service tells you, you already have the latest software, you can only re-install the software via PC anyway.Alternatively, you can perform a master reset on the phone and see if that fixes the problem.Hope this helps.

Software Update Service house cleaning

What controls house cleaning for the Software Update Service? If I ask it to stop mirroring updates that have long since been applied, the files still hide in /usr/share/swupd/.
Deselecting the mirroring of an update doesn't help.
The normal house keeping tasks don't seem to clear it out.
I could just navigate to the directory and delete by hand, but that just doesn't seem The MacWay™...

This is probably because you had it set to copy everything automatically in the first place and then you switched that option off. We run into the same problem and, unfortunately, you just have to bear the huge download of the last 4 years worth of Apple updates... Once that has been downloaded SUS will obey new settings. You may need to manually enable the updates if you changed that setting since the download started.
Mind it, since you would have everything there anyway there would be less of an issue leaving on the automatic download option...

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Problems with Lion Software Update service

I just recently upgraded our Xserve to Lion server so we could start deploying Lion clients. The upgrade seemed to go fine, but the Software Update service may end up being a deal breaker. I can get Lion clients to connect to the server for updates, that is not a problem. The problem is when Lion client says it needs to download additional software to run a program, in our case a Java runtime environment. When it looks on the software update server it says "The software is currently unavailable, please try again later." If I point it back to Apple it works just fine. We need to have our clients recieving updates locally for bamdwisth reasons, but if they cant get the software that they need then it makes having a local SU server useless. Anyone know how to fix that? And on a side note the new Server app that is supplied with Lion doesn't list SU as a service, and I can't figure out how to add or remove the services. Am I missing something? Thanks.

To access many of the Server Tools in Lion Server you'll have to go to apple's website and download the Server Admin for 10.7 Server. This is the familar to 10.6.x server admin tool that apple does not include as the standard set of tools. Once you download it you'll have access to these additional services via the GUI:
DHCP
DNS
Firewall
Mail
NAT
NetBoot
Open Directory
Podcast Producer
RADIUS
Software Update Xgrid
LJS

The lastest version of Flash on my pc has a typo in the properties, see as follows: "Adober Flashr Player Update Service 13.0 r0". Notice the "r" at the end of both Adobe and Flash. Is this malware of just a poorly completed application?

Is this malware, OR just a poorly completed application?
It updates to a version that is not the absolute latest on the Adobe website downloads page which is what first got my attention. Yesterday I had to delete the updater executable to get Flash to update to the latest. Yet today here goes the updater again with the properties: "Adober Flashr Player Update Service 13.0 r0".

Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

NI Update Service 2.1.0.103 recommends installing LV 2012 f1 patch over later version

Similar Messages

Maybe you are looking for