NI USb 6211 DAQ to get a signal inside the computer

I am using Ni USb6211 DAQ to get a signal inside the computer, but the signal displayed as blocks of samples and I need contiuous signal display, I mean instance signal. Could you please help me?

They are medical signals and the synchonization is important.
I have experience in Labview enough to finish my work. Thank you for your time and you do not have to solve.
Attachments:
ECG & Pulse oximetry.vi ‏388 KB

Similar Messages

USB 6211 DAQ counter

I am using the circuit and labview program found on the following link and I would like to use a USB 6211 DAQ. I have noticed that the ctr0 and ctr1 both have multiple pins on the DAQ. The circuit diagram says to connect one to "out" and the other to "gate". Do I have to initialize anything or declare what pin i am using, or can i just wire to the "out" and "gate" pins for the respective counters and run the program?
http://decibel.ni.com/content/docs/DOC-8665

Hey,
At the DAQmx Create Channel.vi you declare what counter you are using with the Physical Channel Input.
E.g. you specify Dev1/ctr0 then you have to take CTR0 Out or Gate or Source, depending on the Task.
Christian

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201328 I'm trying to use an iphone 3 with t-mobile plan, itune say the phone is unlocked however i can't get a signal with the new sims card

I'm trying to use an iphone 3 with t-mobile plan, itune say the phone is unlocked however i can't get a signal with the new sims card

How is iTunes telling you it is unlocked? Did you go through an unlock procedure with your cell company and then Restore it in iTunes?

I am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My computer is authorized to play purchases but for one of the songs I recently purchased I keep getting prompted to authorize the computer to play the song. How do I fix this?

I recently purchased a song on my iphone. When I synced my phone to my computer, I was prompted to authorize the computer to play the song, which I did. It did not compute and thus when I try to play the song in iTunes on my Macbook Pro, I keep getting prompted to authorize the computer. Does anyone know why this is happening and how I can fix it? I also cannot play the song now from my iPhone. I even tried re-downloading it from the iTunes store and that did not help.

That suggests the track is damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Video signal out the computer

Hi all,
I'm looking for a video interface FW, that I could distribute video signal out the computer into for example, an external TV monitor or video recorder.
I need it has an audio channel too.
Could you recommend me a video interface ( converter ) FW for Mac Intel ?
Thank you in advance.

Try here:
http://desktop.grassvalley.com/products/videoconversion.php
aL

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your iphone backup file". This is very frustrating

I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

I have the "Hanvon 5040 drawing tablet",it was working perfectly with mac till last month.As soon as i plug the USB of my tablet into my macbook pro the computer is blocked and an error apears: "you need to restart your computer..."nothing works.Any help?

I have the "Hanvon 5040 drawing tablet",it was working perfectly with mac till last month.As soon as i plug the USB of my tablet into my macbook pro the computer is blocked and an error apears: "you need to restart your computer..."nothing works.Any help?

Check with the manufacturer for updated drivers for your tablet.

I keep getting a message that the computer can not find a .local server

I keep getting a message that the computer can not find a .local server

Hi, ImTiffanyA.
The most common cause for this issue would be media present that is purchased with another Apple ID. The article below will walk you through the process of verifying if that is the case or correcting the issue if not.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Jason H.

I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Is there a way to get lightroom to search the computer for catalogs like aperture does?

Is there a way to get lightroom to search the computer for catalogs like aperture does? I've switched over from Aperture to Lightroom, and i liked how in Aperture when i went to open "other library" it would basically scan all connected drives for them, and show me when last opened and what version. Is there a way to do this with Lightroom, either in program or by a third party app?

The user interface is on a level of elementary PC software
something I have deteced till now
no free moving workspace windows
no search function for the whole catalog
no support of mpg files in the archive
no chromatic appararture correction
second screen sometimes gets lost, when moving between screens
no automatic creation of collection ( very risky direct interfacing with the original file system )
wrong counting of objects in catalog folder when creating virtuel copies
What worked good is the import of the APERTURE Archive ( 40000 objects ) took me one night and its there with the above obsticles!!! I am using just three days and I have to say
not user friendly
not workflow supporting
risky user interfacing with masters
As JimHess stated, there is no risk working with the masters.
Chromatic aberation correction is available in Lightroom, searching the entire catalog is available in Lightroom.
With regards to your other comments, the idea that Lightroom should work the same (or very similar) to Aperture is one that you should remove from your thoughts. It will only get you into trouble. Lightroom is not Aperture and will not work the same, and has different underlying principles, and so its pointless to think you will be able to do everything the same way you did it in Aperture. You need to be open to Lightroom's features, and Lightroom's way of doing things. I agree with JimHess that it takes most people a while to learn Lightroom's way of doing things, but your patience will be rewarded.

HT2188 my ipad is stuck on itunes showing the usb lead and cant get off it touch the screen nothing happens

my ipad is stuck on itune showing the usb cable but cant get it off

After a trip to the Apple Store with this problem, I found out that USB connections have different levels of power. Try changing USB ports, then look for iTunes to recognize the iPad is connected. Good luck!

Does the 3G get better signal in the dock? (like the orignal iPhone)

For those of you who have the 3G, do you find that you get more bars when the iPhone is sitting in its dock? This has always been the case for the original iPhone.

Hi elmnt61,
I recently took an hour drive to the nearest Apple Store to talk about my iPhone 3G reception problems at the genius bar only to be told I needed to make an appointment. So as not to be a totally wasted trip, I picked up a couple of accessories. One of my purchases was the iPhone 3G Dock. I was pleasantly surprised to learn that it boosted my nearly nonexistent signal at home to two or three bars. This occurs whether it is plugged in or not, as I get the same benefit when the phone is just in the dock with no cable attached. I can use it as a stand and easily use the speakerphone feature and plug it in when the phone needs charging.

How to get a signal from the serial port to start a labview program?

I need to synchronize the data obtained from a program (which is not in Labview)with the data collected with Labview on a different computer. I can send some data strings to the serial port of the computer running the Labview program when the other program starts. However, I need to be able to read the trigger in my Labview program. Do you know what I should do? Thanks.

If you don't have any other programs listening on the COM port, you need to let a LV program run BEFORE the signal comes, otherwise you won't be able to read it. You can have the program wait in a slow timed loop so that it doesn't use up too much CPU time, and when the required "trigger" comes, to move into the main part of the program.
You basically need a while loop waiting for a certain string in the serial buffer. Once the string is found the while loop is exited, and the data acqquisition or whatever else you require from the progam can be performed.
In the example attached the program wait for ANY text to be sent to the COM port. Please note that you need to configure the VISA resource before using it. Once there is something at the COM port, the loop will exit and the rest of the program will be executed.
Hope this helps
Shane
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)
Attachments:
Wait for serisl message.vi ‏17 KB

NI USb 6211 DAQ to get a signal inside the computer

Similar Messages

Maybe you are looking for