NI VISA freezes when initializi​ng

Why does NI VIsa configuration (version 5.3) freezes in initializing? 
Attachments:
Screen Shot 2013-06-25 at 12.43.36 PM.png ‏208 KB

Hi, were you able to solve this issue? I also got Arduino Uno and have exactly the same problem. NI-Visa freezes while initializing...
I am using Labview 32-bit 2011 on Mac OSX 10.8.4.
Let me know if you could make it work. I'm dying to get started with my Arduino!
Thanks in advance.

Similar Messages

  • How to fix Acrobat 9 Standard freezing when I try to open a PDF form I created?

    How to fix Acrobat 9 Standard freezing when I try to open a PDF form I created?

    Hi jamesh,
    Considering the error 'licensing has stopped working', I would refer you to visit this KB doc link and try troubleshooting:
    Error "Licensing has stopped working" | Windows
    Regards,
    Anubha

  • FireFow freezes when printing to Adobe PDF printer

    Hi,
    I regularly but not always have FireFox freezing when printing a page with the Adobe PDF printer (not with the plug-in but by using the "print this page" button on the page I visit or by clicking File > Print . The only way to get out is to kill FireFox.
    Most often, I can eventually print the page after restarting FireFox and regaining access to the page. The trouble is that the page may no longer be available if the site requires identification and starts a new session ( ignoring the previous one).
    This is annoying.

    This is as much as I know about that add on [http://helpx.adobe.com/acrobat/using/using-pdf-printer.html] Have you checked the printing preferences or made any changes recently?
    It is also possible to reset the printer settings: [[Fix printing problems in Firefox]]

  • It seems that my firefox hangs/freeze when I'm playing youtube vids, unable to surf at all. When i check task manager it seems to be a plugin container.exe problem? Can someone help me pls..

    My firefox sometimes totally hangs/freezes when i try to replay a youtube video. I click the play button but the whole firefox juz hangs. When i try to end task it, i noticed a firefox "plugin container.exe" process.. So i figure it might be a plugin problem? I hope someone can help me with this..
    Its getting very irritating and i love using firefox for web surfing.
    Thanks in advance for ur help

    YouTube videos use the Flash plugin. You can test your Flash plugin and see what version is installed by going to [http://www.adobe.com/software/flash/about/ Adobe's Flash Player test page]. To update Flash to the latest version, see [[Managing the Flash plugin]].
    Starting in Firefox 3.6.4, Flash is loaded in a separate plugin-container process. For the background, see the articles [[What is plugin-container]] and [http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins Plugin-container and out-of-process plugins (MozillaZine KB)].
    If Firefox hangs when playing Flash videos at YouTube, it could be a video driver issue, Try turning off hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player display settings] (visit any page that uses Flash, such as [http://www.adobe.com/software/flash/about/ Adobe's test page], then right-click the Flash animation, select Settings, and uncheck "Enable hardware acceleration" on the Display panel). ...More information here:
    *[[Cannot view full screen Flash videos]]
    *[http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos Performance or display issues with certain Flash videos (MozillaZine KB)]

  • Crash or freeze when using Spot Removal

    I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
    Message title was edited by: Brett N

    yes it is Windows 7
    Date: Sat, 27 Oct 2012 14:46:54 -0600
    From: [email protected]
    To: [email protected]
    Subject: Crash or freeze when using Spot Removal
        Re: Crash or freeze when using Spot Removal
        created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
    Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Lightroom by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Nano freeze when finishing sync

    iTunes freezes (completely non-responsive, won't close, etc) when it is finishing sync.  Doesn't occur all of the time but occurs enough (> 50%) to be incredibly annoying as it ends up basically locking up the system as any apps launched after tend to lock up or not even start. I can kill iTunes with resmon but there is something (service, ??) still lingering and fouling the system up, even a windows shutdown will not complete as it hangs in the process of shutting down.
    Latest iTunes (10.4.0.80), Win7. ipod nano multitouch (latest version).
    I've tried un-installing & re-installing iTunes.  I've scanned the "freeze when finishing sync" and they don't seem to apply; I don't have any iTune add-ins installed and am not using remote drives. I do tend to run close to the limit of the Nano capacity.
    any help would be appreciated.

    Read the PDF user manual for a possible solution:  iPod Manuals, search through Apple's Knowledge Base for support Articles and/or iPod Nano Support 
    If still under warranty, you can also visit your local Apple Store or AASP.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.

  • I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    This is an open forum, not Adobe support... you need Adobe staff support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Extension Manager CS6 freezes when loading extensions

    Extension Manager CS6 freezes when loading extensions
    When launching Extension Manager CS6 it starts loading extensions but totally freezes when the last 30 percent of the loading extension bar is still unaccomplished. It is not possible to close the window, not even with the task manager.  I have restart the computer to get rid of it.
    My OS is Windows 7, 64 bit. The most recent versions of the entire Adobe CS family are installed, freshly updated, including the Extension Manager CS6.
    To trace the cause of the problem I tried to create a log file in the folder C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6. I logged in as administrator and wrote in the Command Prompt Window:
    echo > ExManLog.YES
    The log file was created but contains nothing but "ECHO is on".
    A possible cause of the problem might be that I have two installed active version of Ajatix Advanced CSS Drop Down Menu, which is an add-on to Dreamweaver. The first version is the free one, the second is the full paid version. I would like to deactivate the first one since which might make the Extension Manager happier. But the only way to deactivate it that I know of is to use the Extension Manager. Catch 22.

    Dear Carl, thanks for the advice that made me understand how to remove an extension without using the Extension Manager. However, the problem persists, i.e the Extension Manager freezes soon after it is launched, when the last 30 percent of the loading extension bar is still unaccomplished.
    Following your instruction I have tried to remove both my versions of the troublesome DW extension (Ajatix Advanced CSS Drop Down Menu). Which in my case meant that I deleted the following files:
    the files com.ajatix.AdvancedCSSMenuLight.mxi, com.ajatix.AdvancedCSSMenuLight.mxi_air and com.ajatix.AdvancedCSSMenuLight.zxp in C:\Users\<My UserName>\AppData\Roaming\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
    and the files ajxcssmenu2.3.0.mxi, ajxcssmenu2.3.0.mxi_air and ajxcssmenu2.3.0.mxp in C:\ProgramData\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
    In the hope of cleaning out everything from this extension I have also deleted the following files:
    AJXCSSMenu.chm, AJXCSSMenu.dll in C:\Users\UpdatusUser\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
    and AJXCSSMenu.chm, AJXCSSMenu.dll, AJXCSSMenuLight.chm, AJXCSSMenuLight.dll in C:\Users\ipb-master\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
    Every time I thus get rid of the Ajitex files the Extension Manager seems happy and loads the only extension I currently have left (Adobe exchange). However when I reinstall the Ajitex extension, the Extension Manager behaves in the same bad manner, freezes after approximately 70 percent of the process of loading extensions. Same thing when I remove this extension and try to install another from Ajitex (Email Spam Blocker). It seems to install all right but afterward the Extension Manager freezes when launched.
    Don't know what to do now.

  • MacBook Pro Mid 2012 freezes when plugged in

    Hi. My Mid 2012 MBP which runs on Yosemite 10.10.2 keeps freezing even when just browsing on Chrome so I uninstalled Chrome and used Safari. I was still having problems after switching browsers so I restored my device to its factory settings but the restore did not solve my problem. All this time my device was plugged in so I unplugged it and tried to browse. It did not freeze or crash. I read the forums and found out about the SMC reset and a NVRAM reset but my device is still freezing when plugged in. I am typing this while my MBP is unplugged. Please help.

    Reset the SMC again:
    http://support.apple.com/en-us/HT201295
    Then try s safe boot:
    http://support.apple.com/en-us/HT201262
    Any change?
    Run an Apple Hardware Test:
    https://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    Ciao.

  • I have a powerbook G-4 15 inch, It wont boot up and the display only works on the first try. it gets to the apple screen and freezes, when i try to restart theres no display. Help please, whats the issue here?

    I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.

    Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
    Safe Boot takes longer than normal startup
    http://support.apple.com/kb/TS1884?viewlocale=en_US
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://docs.info.apple.com/article.html?artnum=106214
     Cheers, Tom

  • IPhone 4 freezes when I try to make or receive a call

    When I try and call another person my iphone freezes. Sometimes its instant, sometimes the speaker is lit up and then it freezes.
    It also freezes when somebody tries to call me.
    Please could somebody help as this is doing my head in.

    Hey there ElizabethPetit,
    It sounds like when you try and change your wallpaper the Settings app becomes unresponsive and you have to quit it. I want to recommend a few things here. First close all the running apps on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone and try again:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, I would next backup your device to iTunes, and restore it with
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Numbers freezes when I attempt to open a file from the iCloud

    Hello,
    My Numbers app for my iMac freezes when I attempt to open a spreadsheet file from the iCloud.  These same files open fine on my iPad, and I make sure to close Numbers on my iPad before I attempt to open the file on my iMac, but it makes no difference.  The app freezes, and I have to manually force stop the Numbers process.  Any help would be appreciated.

    How do I get the dock to recognize the latest numbers version I have.
    Go to the Applications folder, find Numbers 3 and drag it to the dock. It will then look like the lower icon here (the one with the 4 columns). 
    Another way is, if Numbers 3 is already open, to right-click the icon in the Dock and choose 'Keep in Dock' under 'Options':
    You can drag the icon with the three columns off the Dock if you don't want to open Numbers 2 from the Dock.
    SG

  • I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

    I Mac freeze: When powered on all I get is a blank white screen with the apple logo. No "beach ball" nothing more. Tried all the usual restarts. Help?

    Tried all the usual restarts. Help?
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    ===========
    Your profile is a complete blank!!!!
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • ITunes 11.0.2.26 freezes when adding folder to library

    iTunes 11.0.2.26 freezes when adding folder to library. This did not occur with any previous version and is taking place with several different folders. Adding files as a batch wrks fine.

    Hi DJ_Dan,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    - Judy

  • Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly

    Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
    Original message posted Aug 4, 2007:
    "For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
    I have done the following:
    Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
    I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
    I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
    Thanks in advance for any help you can provide."
    Solution provided by Apple:
    I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.

    As a guess it suggests to me that the leads on U28 need to be reflowed.
    Mad Dog

Maybe you are looking for

  • 5th Gen Ipod won't start after setting for a day...

    If I let my Ipod sit for more than a day or two after turning it off it will not start up but keeps displaying the folder icon with the support URL. I try to reset it but it will not reset, it just keeps starting up and displaying the folder and then

  • How to add new fields in message creation screen

    Hi All,     My requirement is to add another 2 fields in the message creation screen.     Also I found this link is bit useful. Add custom fields to Support Message Can anyone share the detailed procedure to add a field in the message screen. Thanks

  • Installing from early system disc

    I have an early Leopard disk, which my mac mini spits out after a quick examination. I have an up-to-date version of Leopard installed on an external drive and would like to install from my old Leopard disc -- which I paid for! -- COPYING all the ele

  • Queues on Hold in Cockpt (SMWP), but Running in SMOHQUEUE

    Dear Gurus In the **** pit when I go to  <b>Runtime> CRM Middleware R&R Queues>Status of R&R Queues>Queues on Hold</b>. The status is <i><b>Red</b></i> with the description SUBCHECK on Hold. When I right click on the red button and go to the Analysis

  • Date Conditional Formating

    I know this is a simple question but don't have a lot of time to research it. I want to apply 3 different font color formats to a date field. How do I manipulate the dates in the formulas so that i can get the following: Over 9 Months old = Green Ove