NI_VISA install errors on Windows 2008 R2

I have installed LabView 2009 SP1 on a relatively modern PC (XeonW3520, 12 GB RAM, Windows Server 2008 R2 Enterprise) computer running some equipment in an optics lab.  However, I got a variety of errors during installation of drivers.  As I need to communicate with a NI GPIB-Enet/1000, I tried installing the 2.8.0 version of 488.2.  However I got 4 errors.  Per the install program, I rebooted and tried reinstalling.  That did not get rid of the errors.  The errors were of the form:
The "NI-DIM 1.11.0f0 for 64 Bit Windows" has failed with the following error:
Error 1722.  There is a problem with this Windows Installer package.  A program run
as part of the setup did not finish as expected.  Contact your support personnel or
package vendor.
I answered yes at the continue prompt.  Other errors were with:
NI-MDBG 1.10.0f0
NI-MXDF 1.11.5f1
NI-ORB 1.9.3f0
(all for 64 Bit Windows).
I then figured out that these are part of NI-VISA so I downloaded the most recent version
I could find (5.0.3) and tried to install that.  I got the same errors, rebooted and tried again
and got the fun "Please correct the problem and try again" message.
Any hints on how to correct the problem?
I'm logged in as Administrator and on the machine console (remote desktop is configured and licensed as that is part of our site license).
Will these errors prevent LabView from working correctly?
Will they prevent programs compiled with C++/C using IEEE-488 from working correctly?
I have been running a slightly older version of LabView under Windows Server 2008 (32-bit, not R2) and didn't have installation problems.  I was using the 32-bit version of Server as some hardware I'm using only had 32-bit support (of both Server 2003 and Server 2008) until recently.
Thanks,
Stuart

I've tried again.  Removed all NI software and removed the installation directory.  Rebooted and logged in as Administrator (Windows Server 2008 R2 Enterprise).  Installed LabView 2009 64-bit from a burned DVD (University site license) with logging enabled.  No errors shown on screen.  Rebooted.  Then installed the default stuff from the Feb 2010 driver DVD using logging.  Some errors but now in log.  Rebooted.  Then installed 2.8 of 488.2 (I have a new GPIB-ENET/1000 which requires 2.8) using logging.  Got errors but now in another log.  Rebooted.  Then installed VISA 5.0.3 with logging.  Got errors but now in yet another log.  Rebooted ...
I don't know if I need VISA or not.  The instrument VIs for some of the instruments connected by GPIB use VISA calls.  So I just did the default installs for drivers, 488.2 and then VISA.
I've zipped the four installation logs into one file - still quite large (25 MB).  I'll try attaching - no idea if it will work.
Does not work - got error (in pink) - so how should I get them to you?
Stuart

Similar Messages

  • OBIEE install problem on Windows 2008 R2 64bit server

    Hi!
    I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
    I follow these documentations:
    Oracle® Fusion Middleware
    Installation Guide for Oracle Business Intelligence
    11g Release 1 (11.1.1)
    E10539-01
    and
    http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
    Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
    First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
    Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
    Then from JRockIT installed WLS_1035 generic.
    Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
    Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
    Tests I have done,
    Install loopback adapter
    Deinstall loopback
    Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
    Verified that we have static ip on the server
    Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
    And checked the installer logs everytime, no errors, no warning.
    Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
    Best regards,
    Anders

    Hi!
    It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
    Best regards,
    Anders

  • Installing Dirsync on Windows 2008 Server Standard FE

    Hello all,
    I need to Dirsync my only domain controller i have to Office 365.  My server is a Windows 2008 Server Standard FE.  I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
    (Says my Powershell is not at least 2.0, but it is...) 
    Anyone tried to install Dirsync on that kind of server ? (and made it work?)
    Regards,

    It is
    required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2.  I believe the same applies to 2008 SP1 as well.
    Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell.  You may want to temporarily change your regional format  to English to test this, if this applies to you.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Unable to Install OBIEE on Windows 2008 Server R2

    I am Unable to Install OBIEE on Windows 2008 Server R2. It is giving the error
    Oracle Business Intelligence is not supported on this Windows version. Oracle Business Intelligence is only supported on Windows XP x86, Windows 2003 x86, Windows 2003 AMD64, Windows 2003 EM64T, Windows Vista x86, Windows Vista AMD64, Windows Vista EM64T, and Windows 2000 x86.
    But is there any patch to install the OBIEE on Windows 2008 Server R2

    Hi Sk
    I think it might be due to compatible issue.So check the properties of the install.exe file and change the compatability to windowsxp or windows 2003 ,then try to install .I think its going to work.Because i installed OBIEE10.1.3.4 on windows server 2008.
    Regards
    Sandy

  • TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

    ChrisJ4203 wrote:
    Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
    Chris,
    This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!!   I was having the exact same error messages as Mike.
    Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
    G

  • WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows 2008 R2 for WMI namespace "\root\cimv2"

    WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows
    2008 R2 for WMI namespace "\root\cimv2"
    On Windows 2008 and Windows 2012 R2 GetSecurityDescriptor works fine.
    Thanks,
    Sandygg
    Dev

    Hi Anna,
    No event getting generated under Application / Security, but following event was reported under Microsoft-Windows-WMI-Activity/Operational
    log.
    Id = {01EAEC48-F800-0001-5A81-6ADB7E6CD001}; ClientMachine =
    sever2008r2; User
    = sever2008r2\user;
    ClientProcessId = 12580; Component = Unknown; Operation = Start IWbemServices::ExecMethod - root\cimv2 : __SystemSecurity::GetSecurityDescriptor; ResultCode = 0x8004101d; PossibleCause = Unknown
    Will let you about WMI Diagnosis tool result.
    Thanks,
    Sandy
    Dev

  • Error when Installing OBIEE on Windows 2008 r2

    Hi all
    When Install Oracle BI 10.1.3.4.2 on Windows Server 2008 r2  x64I have several errors in install log:
    (Aug 13, 2013 8:52:46 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\server\Bin\installperfsas.bat error=2
      at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
      at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
      at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
      at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
      at java.lang.Thread.run(Unknown Source)
    (Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\web\bin\installperfsaw.bat error=2
      at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
      at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
      at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
      at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
      at java.lang.Thread.run(Unknown Source)
    (Aug 13, 2013 8:52:47 AM), Install.product.install, com.siebel.analytics.install.ExecWizardActionCustom, err, com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
    STACK_TRACE: 7
    com.installshield.util.ProcessExecException: CreateProcess: G:\BI\OracleBI\oc4j_bi\bin\oc4j.cmd -start error=2
      at com.installshield.util.ProcessExec.executeProcess(ProcessExec.java:180)
      at com.installshield.wizardx.actions.ExecWizardAction.executeProcess(ExecWizardAction.java:412)
      at com.installshield.wizardx.actions.ExecWizardAction.run(ExecWizardAction.java:457)
      at com.siebel.analytics.install.ExecWizardActionCustom.run(ExecWizardActionCustom.java:79)
      at java.lang.Thread.run(Unknown Source)
    I found several discussions on this, but there was no solution.
    JVM - jdk1.6.0_37 and it works fine. Tried to use x86 and x64 jdk. No reason.
    I tried to install "as administrator", but it did not worked. Copy the install folder to the C:\, run with comtatibility with Windows7 and got the same error.
    I install the same OBIEE on other servers and it was no problem to install.
    Please HEEEELP

    Hi Agha,
    Yes, You can install a Windows 2008 Enterprise R2 machine as additional domain controller  along with Windows server 2008 Enterprise SP2 DC's. There will not be any issues.
    Before you add a domain controller that is running Windows Server 2008 R2 to an Active Directory forest run Adprep.exe from the Windows Server 2008 R2 media on your existing domain controllers to prepare your domain and forest.
    http://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Unable to install DPM2012R2 on Windows 2008 R2 or Windows 2012 Server :(

    Hi together
    I'm trying installing (fresh) on a new Win 2008 R2 System DPM2012R2, i tryed the same on Server 2012.
    I got every time a error message while its installing DPM (after the SQL prepraration).
    I tested with SQL 2008 R2 Standard and SQL 2012 Standard without success.
    On the Setup, the setup Clients dies and gives me dotn.net error Message:
    1. Dialogbox
    An unexpexted error occured during the installation
    Fore more details, check the DPM Setup error logs.
    ID: 4387
    SetupDpm.exe has stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: setupdpm.exe
      Problem Signature 02: 1.0.523.0
      Problem Signature 03: 5226e038
      Problem Signature 04: mscorlib
      Problem Signature 05: 4.0.0.0
      Problem Signature 06: 517a19ee
      Problem Signature 07: 2606
      Problem Signature 08: 9c
      Problem Signature 09: System.IO.FileLoadException
      OS Version: 6.1.7601.2.1.0.272.7
      Locale ID: 2055
      Additional Information 1: 88d5
      Additional Information 2: 88d5dcdc6016348f4f024ac221a8d43d
      Additional Information 3: 7cab
      Additional Information 4: 7cab783845fc6de75e0b56019fda732a
    2. DPM Log
    [08.11.2013 14:54:47] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [08.11.2013 14:54:47] Data : Mode of setup = User interface
    [08.11.2013 14:54:47] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:54:47] Data : File Attributes = Directory
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:54:48] Information : The setup wizard is initialized.
    [08.11.2013 14:54:48] Information : Starting the setup wizard.
    [08.11.2013 14:54:48] Information : <<< Dialog >>> Welcome Page : Entering
    [08.11.2013 14:54:56] Information : <<< Dialog >>> Welcome Page : Leaving
    [08.11.2013 14:54:56] Information : <<< Dialog >>> Inspect Page : Entering
    [08.11.2013 14:55:02] Information : The setup was cancelled by user.
    [08.11.2013 14:55:02] Information : Microsoft System Center 2012 R2 Data Protection Manager setup over.
    [08.11.2013 14:58:52] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [08.11.2013 14:58:52] Data : Mode of setup = User interface
    [08.11.2013 14:58:52] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:58:52] Data : File Attributes = Directory
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:58:53] Information : The setup wizard is initialized.
    [08.11.2013 14:58:53] Information : Starting the setup wizard.
    [08.11.2013 14:58:53] Information : <<< Dialog >>> Welcome Page : Entering
    [08.11.2013 14:58:54] Information : <<< Dialog >>> Welcome Page : Leaving
    [08.11.2013 14:58:54] Information : <<< Dialog >>> Inspect Page : Entering
    [08.11.2013 14:59:05] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:05] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:05] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:06] Data : Path of inspection output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:06] Information : Instantiating inspect component.
    [08.11.2013 14:59:06] Data : Path of output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:06] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:06] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:06] Information : Getting scenarios for the product: DPM
    [08.11.2013 14:59:06] Information : Getting scenarios for DPM
    [08.11.2013 14:59:06] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [08.11.2013 14:59:06] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:06] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
    [08.11.2013 14:59:07] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:07] Information : Inspect context initialized with
    SQL Server namespace:
    \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace:
    \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [08.11.2013 14:59:07] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:07] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:07] Information : **************************************************************************************
    [08.11.2013 14:59:07] Information : Start Inspect.
    [08.11.2013 14:59:07] Information : Getting checks for the group : Common
    [08.11.2013 14:59:07] Information : Getting checks for the group : Install
    [08.11.2013 14:59:07] Information : Getting checks for the group : Retail
    [08.11.2013 14:59:07] Information : Getting checks for the group : Remote
    [08.11.2013 14:59:07] Information : Check if the machine role is Domain Controller.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_ComputerSystem
    [08.11.2013 14:59:07] Data : Localhost in Computer role = 3
    [08.11.2013 14:59:07] Information : The machine role is not a Domain Controller.
    [08.11.2013 14:59:07] Data : checkId = Processor
    [08.11.2013 14:59:07] Information : Running the check: Processor
    [08.11.2013 14:59:07] Information : Getting the check for the checkId : Processor
    [08.11.2013 14:59:07] Information : Calling the method: CheckProcessor
    [08.11.2013 14:59:07] Information : Check processor configuration.
    [08.11.2013 14:59:07] Information : Query WMI provider for configuration of processor.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_Processor
    [08.11.2013 14:59:08] Data : Clock speed of processor = 1900
    [08.11.2013 14:59:08] Data : Manufacturer of processor = GenuineIntel
    [08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Processor and result: 0
    [08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:08] Data : Result = 0
    [08.11.2013 14:59:08] Data : checkId = Memory
    [08.11.2013 14:59:08] Information : Running the check: Memory
    [08.11.2013 14:59:08] Information : Getting the check for the checkId : Memory
    [08.11.2013 14:59:08] Information : Calling the method: CheckPhysicalMemory
    [08.11.2013 14:59:08] Information : Check the amount of RAM.
    [08.11.2013 14:59:08] Information : Query WMI provider for configuration of memory.
    [08.11.2013 14:59:08] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_OperatingSystem
    [08.11.2013 14:59:08] Data : Found memory = 25119276
    [08.11.2013 14:59:08] Data : Total amount of memory = 25119276
    [08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Memory and result: 0
    [08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:08] Data : Result = 0
    [08.11.2013 14:59:08] Data : checkId = MMCVersion
    [08.11.2013 14:59:08] Information : Running the check: MMCVersion
    [08.11.2013 14:59:08] Information : Getting the check for the checkId : MMCVersion
    [08.11.2013 14:59:08] Information : Calling the method: CheckMMCVersion
    [08.11.2013 14:59:08] Information : Check the version of Microsoft Management Console on the machine.
    [08.11.2013 14:59:09] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
    [08.11.2013 14:59:09] Data : Required version of Microsoft Management Console = 5.2.3790.2560
    [08.11.2013 14:59:09] Information : MMC correct version is detected.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MMCVersion and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB962975
    [08.11.2013 14:59:09] Information : Running the check: KB962975
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB962975
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
    [08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
    [08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB962975 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB975759
    [08.11.2013 14:59:09] Information : Running the check: KB975759
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB975759
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759 is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
    [08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
    [08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB975759 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB2279787
    [08.11.2013 14:59:09] Information : Running the check: KB2279787
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2279787
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2279787 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB2223201
    [08.11.2013 14:59:09] Information : Running the check: KB2223201
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2223201
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB2223201 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2223201 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2223201 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = MonadSoftware
    [08.11.2013 14:59:09] Information : Running the check: MonadSoftware
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : MonadSoftware
    [08.11.2013 14:59:09] Information : Calling the method: CheckMonadSoftware
    [08.11.2013 14:59:09] Information : Detect if PowerShell is installed.
    [08.11.2013 14:59:09] Data : Installed Version of Windows PowerShell. = 6.2.9200.16398
    [08.11.2013 14:59:09] Data : Minimum Required version of Windows PowerShell. = 6.0.6002.18111
    [08.11.2013 14:59:09] Information : Required version of PowerShell software is installed on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MonadSoftware and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Running the check: DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Calling the method: CheckDotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Check if reboot is required because of Dot Net installation.
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
    [08.11.2013 14:59:09] Information : Reboot is not required.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: DotNetRequiresReboot and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SISFilter
    [08.11.2013 14:59:09] Information : Running the check: SISFilter
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SISFilter
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckSISFilter
    [08.11.2013 14:59:09] Information : Detect if SIS Service is running.
    [08.11.2013 14:59:09] Information : Detect if SIS Filter service SIS is running.
    [08.11.2013 14:59:09] Information : SIS Service SIS is running on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SISFilter and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = MSIVersion
    [08.11.2013 14:59:09] Information : Running the check: MSIVersion
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : MSIVersion
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckMSIVersion
    [08.11.2013 14:59:09] Information : Check the version of Windows Installer on the machine.
    [08.11.2013 14:59:09] Data : Version of Windows Installer on the machine = 5.0.7601.17807
    [08.11.2013 14:59:09] Data : Required version of Windows Installer = 4.5.6001.18000
    [08.11.2013 14:59:09] Information : Windows Installer correct version is detected.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MSIVersion and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RebootRequired
    [08.11.2013 14:59:09] Information : Running the check: RebootRequired
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RebootRequired
    [08.11.2013 14:59:09] Information : Calling the method: CheckRebootRequired
    [08.11.2013 14:59:09] Information : Check if reboot is required.
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
    [08.11.2013 14:59:09] Information : Reboot is not required.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RebootRequired and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServerTools
    [08.11.2013 14:59:09] Information : Running the check: SQLServerTools
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerTools
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerTools
    [08.11.2013 14:59:09] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:09] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerTools and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServer
    [08.11.2013 14:59:09] Information : Running the check: SQLServer
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServer
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServer
    [08.11.2013 14:59:09] Information : Check if SQL Server 2008 R2 SP2 is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:09] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServer and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ReportingServer
    [08.11.2013 14:59:09] Information : Running the check: ReportingServer
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingServer
    [08.11.2013 14:59:09] Information : Calling the method: CheckReportingServer
    [08.11.2013 14:59:09] Information : Check if Reporting Server 2008 R2 SP2 is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for Reporting Server 2008 R2 SP2.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11 for query: SELECT * FROM MSReportServer_Instance WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] Information : Reporting Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingServer and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLAgentService
    [08.11.2013 14:59:09] Information : Running the check: SQLAgentService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLAgentService
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlAgentServiceConfig
    [08.11.2013 14:59:09] Information : Check SQL Server Agent service configuration.
    [08.11.2013 14:59:09] Data : SQL Server instance name = DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : SQL Server Agent service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlAgentService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServerService
    [08.11.2013 14:59:09] Information : Running the check: SQLServerService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerService
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerServiceConfig
    [08.11.2013 14:59:09] Information : Check SQL Server service configuration.
    [08.11.2013 14:59:09] Data : SQL Server instance name = DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : SQL Server service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Running the check: SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerReportingServices
    [08.11.2013 14:59:09] Information : Check if SQL Server 2008 Reporting Services is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SqlReportServerService
    [08.11.2013 14:59:09] Information : Running the check: SqlReportServerService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlReportServerService
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckRosettaServicesConfig
    [08.11.2013 14:59:09] Information : Check SQL Server 2008 Reporting Services report server service configuration.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : Report Server service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ActiveDirectory
    [08.11.2013 14:59:09] Information : Running the check: ActiveDirectory
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ActiveDirectory
    [08.11.2013 14:59:09] Information : Calling the method: DetectActiveDirectory
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0

    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLEval
    [08.11.2013 14:59:09] Information : Running the check: SQLEval
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLEval
    [08.11.2013 14:59:09] Information : Calling the method: DetectSqlEval
    [08.11.2013 14:59:09] Information : Detect if SQL Server is evaluation edition
    [08.11.2013 14:59:09] Information : Starting service
    [08.11.2013 14:59:09] Data : Service name = MSSQL$DPM
    [08.11.2013 14:59:09] Data : Current status of service = Running
    [08.11.2013 14:59:09] Information : Service is already running
    [08.11.2013 14:59:09] Data : Edition = Standard Edition (64-bit)
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlEval and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Running the check: ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Calling the method: CheckIfClientTCPEnabled
    [08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
    [08.11.2013 14:59:09] Information : The SQL and DPM machine are same so not checking for DPM installed
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Running the check: ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Calling the method: CheckReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Check Reporting SecureConnectionLevel.
    [08.11.2013 14:59:09] Information : Getting the reporting secure connection level for SERVERDPM/DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:09] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Check the disk space for remote database.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='C:'
    [08.11.2013 14:59:09] Information : Remote DB disk space required : 900 MB disk space available = 191786 MB
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbTCP
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbTCP
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbTCP
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbTCP
    [08.11.2013 14:59:09] Information : Check the Named Pipes protocol for remote database.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbMsi
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbMsi
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbMsi
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbMsi
    [08.11.2013 14:59:09] Information : Check whether the remote DB msi has been installed.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Information : Getting the string form of report object
    [08.11.2013 14:59:09] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:09] Information : End Inspect.
    [08.11.2013 14:59:09] Information : **************************************************************************************
    [08.11.2013 14:59:10] Information : Instantiating inspect component.
    [08.11.2013 14:59:10] Data : Path of output xml = \PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:10] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:10] Information : Getting scenarios for the product: DPM
    [08.11.2013 14:59:10] Information : Getting scenarios for DPM
    [08.11.2013 14:59:10] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
    [08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:10] Information : Inspect context initialized with
    SQL Server namespace:
    \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace:
    \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [08.11.2013 14:59:10] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:10] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServer
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerReportingServices
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerTools
    [08.11.2013 14:59:10] Information : Getting the installables which were not detected
    [08.11.2013 14:59:10] Information : Getting the string form of report object
    [08.11.2013 14:59:10] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Getting the falures while performing checks
    [08.11.2013 14:59:10] Information : Getting the error results
    [08.11.2013 14:59:10] Information : Getting the warning results
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Getting the falures while performing checks
    [08.11.2013 14:59:10] Information : Getting the error results
    [08.11.2013 14:59:10] Information : Getting the warning results
    [08.11.2013 14:59:10] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:10] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:12] Information : <<< Dialog >>> Inspect Page : Leaving
    [08.11.2013 14:59:12] Information : <<< Dialog >>> User Information Page : Entering
    [08.11.2013 14:59:26] Information : <<< Dialog >>> User Information Page : Leaving
    [08.11.2013 14:59:26] Information : <<< Dialog >>> Install location Page : Entered
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : File Attributes = Directory
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : File Attributes = Directory
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 14:59:45] Information : Check if the media is removable
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] Data : Drive Name = C:\
    [08.11.2013 14:59:45] Data : Drive Type = 3
    [08.11.2013 14:59:45] Information : Check attributes of the directory
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:45] Information : Query free disk space
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] Data : Free Space = 191786
    [08.11.2013 14:59:45] Information : Query free disk space
    [08.11.2013 14:59:45] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:45] Data : Free Space = 191786
    [08.11.2013 14:59:52] Information : Check if the media is removable
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] Data : Drive Name = C:\
    [08.11.2013 14:59:52] Data : Drive Type = 3
    [08.11.2013 14:59:52] Information : Check attributes of the directory
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:52] Information : Query free disk space
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] Data : Free Space = 191786
    [08.11.2013 14:59:52] Information : Query free disk space
    [08.11.2013 14:59:52] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:52] Data : Free Space = 191786
    [08.11.2013 14:59:56] Information : Check if the media is removable
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:56] Data : Drive Name = C:\
    [08.11.2013 14:59:56] Data : Drive Type = 3
    [08.11.2013 14:59:56] Information : Check attributes of the directory
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:56] Information : Check if the media is removable
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:56] Data : Drive Name = C:\
    [08.11.2013 14:59:56] Data : Drive Type = 3
    [08.11.2013 14:59:56] Information : Check attributes of the directory
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:56] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 14:59:56] * Exception :  => The path C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
    UInt64 requiredDataDiskSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
    *** Mojito error was: PathTooLong; 0; None
    [08.11.2013 14:59:59] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:59] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:59] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:11] Information : Check if the media is removable
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] Data : Drive Name = C:\
    [08.11.2013 15:00:11] Data : Drive Type = 3
    [08.11.2013 15:00:11] Information : Check attributes of the directory
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:11] Information : Query free disk space
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] Data : Free Space = 191786
    [08.11.2013 15:00:11] Information : Query free disk space
    [08.11.2013 15:00:11] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:11] Data : Free Space = 191786
    [08.11.2013 15:00:12] Information : Check if the media is removable
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:12] Data : Drive Name = C:\
    [08.11.2013 15:00:12] Data : Drive Type = 3
    [08.11.2013 15:00:12] Information : Check attributes of the directory
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:12] Information : Check if the media is removable
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:12] Data : Drive Name = C:\
    [08.11.2013 15:00:12] Data : Drive Type = 3
    [08.11.2013 15:00:12] Information : Check attributes of the directory
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:12] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 15:00:12] * Exception :  => The path C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
    UInt64 requiredDataDiskSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
    *** Mojito error was: PathTooLong; 0; None
    [08.11.2013 15:00:22] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:22] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:22] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:31] Information : Check if the media is removable
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] Data : Drive Name = C:\
    [08.11.2013 15:00:31] Data : Drive Type = 3
    [08.11.2013 15:00:31] Information : Check attributes of the directory
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:31] Information : Query free disk space
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] Data : Free Space = 191786
    [08.11.2013 15:00:31] Information : Query free disk space
    [08.11.2013 15:00:31] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:31] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Check if the media is removable
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Drive Name = C:\
    [08.11.2013 15:00:33] Data : Drive Type = 3
    [08.11.2013 15:00:33] Information : Check attributes of the directory
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:33] Information : Check if the media is removable
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Data : Drive Name = C:\
    [08.11.2013 15:00:33] Data : Drive Type = 3
    [08.11.2013 15:00:33] Information : Check attributes of the directory
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:33] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 15:00:33] Information : Check the filesystem on which DPM and prerequisites are installed
    [08.11.2013 15:00:33] Information : C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Information : C:\Windows\system32
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Data : Location of program files = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:38] Information : <<< Dialog >>> Commit Page : Entering
    [08.11.2013 15:00:38] Data : An instance of SQL Server to be used to create database = DPM
    [08.11.2013 15:00:38] Data : Target directory for installation = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:38] Data : Physical location of database = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:39] Information : <<< Dialog >>> Commit Page : Leaving
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : Log setup inputs =>
    [08.11.2013 15:00:39] Data : ProgramFiles = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:39] Data : UIProgramFiles = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 15:00:39] Data : DatabaseFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:39] Data : IntegratedInstallSource = C:\_SOURCE\_SC2012R2\SCDPM\
    [08.11.2013 15:00:39] Data : SqmOptIn = 2
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : <<< Dialog >>> Progress Page : Entering
    [08.11.2013 15:00:39] Information : Function >> MsiSetInternalUI
    [08.11.2013 15:00:39] Information : MsiSetInternalUI returned INSTALLUILEVEL_DEFAULT
    [08.11.2013 15:00:39] Information : Function >> MsiSetExternalUI
    [08.11.2013 15:00:39] Data : Path of main msi = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\msi\msdpm.msi
    [08.11.2013 15:00:39] Data : Path of log file = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\DpmSetup.log
    [08.11.2013 15:00:39] Information : Getting the string form of report object
    [08.11.2013 15:00:39] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 15:00:39] Information : Getting the reporting secure connection level for SERVERDPM/DPM
    [08.11.2013 15:00:39] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 15:00:39] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : Present Secure Connection Level:0
    [08.11.2013 15:00:39] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 15:00:39] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 15:00:39] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : Deploy reports
    [08.11.2013 15:00:39] Data : Path of configuration file of SQL Server Reporting Services =
    \\SERVERDPM\C$\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
    [08.11.2013 15:00:54] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
    [08.11.2013 15:01:09] Data : Source folder for reports (.rdl files) = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\DpmReports
    [08.11.2013 15:01:09] *** Error : CurrentDomain_UnhandledException
    The OS self is patched on the latest updates, SQL too...
    Can anyone give me a hint, this drives me crazy :(
    Thank you for any help
    Volkan

  • Cannot install SP1 on Windows 2008 R2 64bit 0x800f0826

    Hello,
    I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2.
    I tryed install the SP1 in a workgroup machine and the results were successful.
    But when I'm trying to install in my Domain it doesn't work, I think that some GPO or registry keys are modified on their permission.
    So I removed the machine from the Domain and again try install the SP1 but doesn't work either.
    I think that some GPO removes permission on some files and folders.
    What permissions in files or folder should I have to successful deploy of Service Pack 1 on a Windows 2008 in my Domain?
    Thanks in advice.
    Manuel
    Manuel´s Microsoft Forums Threads

    Hi Ramesh,
    I followed your instructions and found that there are 2 updates that were not allowing the installation of several updates that were pending. 
    But the Service Pack 1 of Windows 2008 R2 does not install correctly either, I always get the same error described above. 
    I was reviewing the CBS.log I found this information:
    2014-01-23 16:06:17, Info                  CBS    Obtained poqexec from Cbs key. C:\Windows\System32\poqexec.exe
    /display_progress \SystemRoot\WinSxS\pending.xml
    2014-01-23 16:06:17, Info                  CBS    Startup: Processing non-critical driver operations queue, Count 118.
    2014-01-23 16:06:17, Info                  CBS    Doqe: Locking driver updates, Count 124
    2014-01-23 16:06:17, Info                  CSI    00000005 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:4428ce568718cf01010000006c032801} pathid: {l:16 b:4428ce568718cf01020000006c032801} path: [l:202{101}]"\SystemRoot\WinSxS\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816"
    pid: 36c starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    00000006 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01030000006c032801} pathid: {l:16 b:250fda568718cf01040000006c032801} path: [l:194{97}]"\SystemRoot\WinSxS\amd64_tsusbhubfilter.inf_31bf3856ad364e35_6.1.7601.17514_none_776b19f55ac34470" pid:
    36c starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    00000007 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01050000006c032801} pathid: {l:16 b:250fda568718cf01060000006c032801} path: [l:178{89}]"\SystemRoot\WinSxS\amd64_rdmdrv.inf_31bf3856ad364e35_6.1.7601.17514_none_fe44596e331ef9d7" pid: 36c starttime:
    130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    00000008 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01070000006c032801} pathid: {l:16 b:250fda568718cf01080000006c032801} path: [l:180{90}]"\SystemRoot\WinSxS\amd64_tsprint.inf_31bf3856ad364e35_6.1.7601.17514_none_ca1bed7d5beee2f8" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    00000009 Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01090000006c032801} pathid: {l:16 b:250fda568718cf010a0000006c032801} path: [l:178{89}]"\SystemRoot\WinSxS\amd64_winusb.inf_31bf3856ad364e35_6.1.7601.17514_none_561ae9f52c40e492" pid: 36c starttime:
    130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000a Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf010b0000006c032801} pathid: {l:16 b:250fda568718cf010c0000006c032801} path: [l:180{90}]"\SystemRoot\WinSxS\amd64_hdaudio.inf_31bf3856ad364e35_6.1.7601.17514_none_73863b3e7e0f937c" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000b Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf010d0000006c032801} pathid: {l:16 b:250fda568718cf010e0000006c032801} path: [l:180{90}]"\SystemRoot\WinSxS\amd64_dot4prt.inf_31bf3856ad364e35_6.1.7601.17514_none_cb6128e5835622ff" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000c Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf010f0000006c032801} pathid: {l:16 b:250fda568718cf01100000006c032801} path: [l:182{91}]"\SystemRoot\WinSxS\amd64_clusdisk.inf_31bf3856ad364e35_6.1.7601.17514_none_4bba4b401aee436c" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000d Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01110000006c032801} pathid: {l:16 b:250fda568718cf01120000006c032801} path: [l:182{91}]"\SystemRoot\WinSxS\amd64_modemcsa.inf_31bf3856ad364e35_6.1.7601.17514_none_78520ca36170c34f" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000e Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01130000006c032801} pathid: {l:16 b:250fda568718cf01140000006c032801} path: [l:180{90}]"\SystemRoot\WinSxS\amd64_sffdisk.inf_31bf3856ad364e35_6.1.7601.17514_none_02618e7200897e0a" pid: 36c
    starttime: 130349883608612323 (0x01cf18874d013de3)
    2014-01-23 16:06:17, Info                  CSI    0000000f Performing 1 operations; 1 are not lock/unlock and follow:
      LockComponentPath (10): flags: 0 comp: {l:16 b:250fda568718cf01150000006c032801} pathid: {l:16 b:250fda568718cf01160000006c032801} path: [l:176{88}]"\SystemRoot\WinSxS\amd64_msdsm.inf_31bf3856ad364e35_6.1.7601.17514_none_286d4823f22b1bbe" pid: 36c starttime:
    130349883608612323 (0x01cf18874d013de3)<o:p></o:p>
    It appears the driver may be any device or update any software installed that is causing the problem. 
    We have uninstalled. Net Framework but the behavior is the same, you can not install SP1. 
    Thanks in advance for your help. 
    Best Regards
    Manuel
    Manuel´s Microsoft Forums Threads

  • SQL 2008 R2 install failing on windows 2008 exit code 2068054013

    My install of sql server 2008 r2 is failing with exit code 2068054013. i have checked internet and found few articles to check if OS is debug mode. This is not issue with my server. Here is the summary.txt from bootstrap folder
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Exit code (Decimal):           -2068054013
      Exit facility code:            1212
      Exit error code:               3
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Start time:                    2014-03-14 18:24:11
      End time:                      2014-03-14 18:39:18
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4266.0
    Machine Properties:
      Machine name:                  BEL-BHP-DB01
      Machine processor count:       4
      OS version:                    Windows Server 2008 R2
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       1
      Installation location:         D:\SoftBank\SlipStream\SQL2008R2\x64\setup\
      Installation edition:          STANDARD
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Automatic
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    False
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              D:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   D:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITY\SYSTEM
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  F:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           LocalAccuount
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               E:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data
      SQMREPORTING:                  False
      TCPENABLED:                    1
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlWriter_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Integration Services
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Client Tools Connectivity
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SQLSysClrTypes_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
      MSI error description:         
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\BestPracticesPolicies_Cpu32_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Client Tools SDK
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Business Intelligence Development Studio
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x3
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SystemConfigurationCheck_Report.htm

    Hi,
    Thanks for the update. Glad to know your issue is resolved.
    If you look at the log file SqlSupport_KatmaiRTM_Cpu64_1.log.txt, you will find this error
    MSI (s) (64:94) [18:39:14:853]: Note: 1: 2203 2: D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi 3: -2147287037
    The exact error no. i.e. -2147287037.
    Convert this error no. using a tool (Err.exe)
    D:\Err>Err.EXE -2147287037
    # for decimal -2147287037 / hex 0x80030003 :
      STG_E_PATHNOTFOUND                                           
    oledberr.h
      STG_E_PATHNOTFOUND                                           
    winerror.h
    # The path %1 could not be found.
    -2147287037 = The path %1 could not be found. Which means the msi file path D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi doesn't exist.
    This posting is provided “AS IS” with no warranties, and confers no rights.
    If this reply answers your question, please mark it as Answered for others to find it easily.
    If this reply help you resolving the problem, please vote the post as Helpful.

  • Oracle 10g Installation Error on Windows 2008 server

    Hi Experts,
    I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
    Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
    Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
    Can you please suggest how to handle this error and start the service?
    Regards,
    Naresh.

    Hi All,
    Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
    I was under the impression that the service has to be started before going for SAP installation.
    Thanks all for your replies.
    Regards,
    Naresh.

  • 10g BI publisher installation getting error in windows 2008 R2 64bit

    HI Friends,
    I am trying to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64bit server.
    At the running the setup.exe file its checking and getting passed in the pre-requites.
    And its not opening the installer graphical utility instead of that its showing an error like
    "setup.exe  has stopped working
    windows can check online solution of the problem
    close the program"
    I have downloaded the software from the following location in the OTN,
    http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
    http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)
    http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.1 for Windows x86 (765 MB)
    Please suggests us to move further..
    Awaiting for the reply.
    Regards
    Kumar

    Hi
    1. Installed RCU first see the link bleow
    http://lamont-consulting.com/index.php/blog/obiee/11g/107-obiee-11g-rcu-install
    The RCU will communicate with OBIEE
    when you install obiee some information needed regarding the RCU.
    2. Installed OBIEE see the link below
    http://allaboutobiee.blogspot.com/2012/04/obiee-111160-step-by-step-installation.html
    i have 3 machines
    1. I have windows server 2008 64bit, Oracle Database 11g installed
    2. I have windows server 2003 32 bit, RCU and OBIEE installed
    3. I have windows XP SP3 32 bit, OBIEE desktop installed.
    i hope the above links will help you.
    if you have any queries, get back to me .. .

  • Installing Printers from Windows 2008 R2 printer server using the Cname

    Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
    l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error.  this is the message am getting...
    Printer Installation Failed
    You do not have enough privilege to complete the printer installation on the local machine.
    I found this KB and did exactly what is in the KB but stilll....
    lhttp://support.microsoft.com/kb/870911/en-us
     need help

    Hi.
    I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
    When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
    Windows 2008 server R2 64-bit 
    HKLM\SYSTEM\CurrentControlSet\Control\Print
    = ”DnsOnWire” = REG_QWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
    = DisableStrictNameChecking = REG_QWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\ 
    REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
    Windows 2008 server x86 
    HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
    HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\  REG_SZ = OptionalNames = “aliasname”
    (C-name record in DNS)
    (reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
    Don't forget to reboot your system after these changes!
    Best Regards, Mats

  • Weblogic 10.3.5 Install Failing on Windows 2008 R2 64bit Shared Drive

    I am attempting to install Weblogic 10.3.5 on a Windows 2008 R2 64bit machine.
    This will be part of a scaled out OBIEE environment.
    As per Oracle's instructions (http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#BIEIG2028) I am attempting to install the Middleware Home Directory to a shared drive (DFS).
    When I get past the "Choose Product Installation Directories" I get a "Insufficient Disk Space" error saying there's 0 MB available on my shared drive, which is clearly not the case.
    I have verified that I have full access to the shared directory.
    I have also tried with several other non-DFS directories.
    Tried with java version 1.6.0_24 Oracle JRockit build R28.1.3-11-141760-1.6.0)24-20110301-1430-windows-x86_64
    Tried with java version 1.6.0)24 64-bit server (no JRockit)
    All with the same results.
    I've seen some people post about getting the same error in Mac installs where the solution was to specify -d64 on the commandline, but this is not in the windows 1.6 JDK. I tried -server, but got the same results.
    I've also seen some people post about getting the same error in Unix installs where the solution is to point to a different version of df which is used to check space on the file system.
    I have yet to find a solution in Windows 2008 64bit that applies to me.
    Any ideas?

    I was able to get around this by installing from the jar using the -Dspace.detection=false option
    http://download.oracle.com/docs/cd/E21764_01/doc.1111/e14774/weblogic_server_issues.htm#BCFFDCFI

  • Install Error in WS 2008 R2

    Attempting to install CF10 on Windows Server 2008 R2 Standard 64bit SP1. I've attempted twice and received an error near the end of the installation process both times:
    "ExecuteAppCmd.exe has stopped working."
    After dismissing the error, the installation finishes but cfm templates are not being processed. Upon launch of the administrator on the server computer a 403 error is received:
    "HTTP Error 404.3 - Not Found
    The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map."
    Has anyone experienced this this issue, or have ideas about resolving?

    Hi,
    Buhje wrote:
    I followed the steps for manual config in the link you posted, but cfm templates are still not rendering.
    After following the manual config steps, can you check the handlers mappings(cfm, cfml, cfr, cfswf). They should be pointing to cf_root\config\wsconfig\[Magic Number]\isapi_redirect.dll
    Can you check that.
    Buhje wrote:
    Is all this because MX7 left it's connector in place after uninslall? If so, is there a way to manually remove it, and then just reinstall 10?
    We would suggest you to remove the MX7 connector manually (removing the physical files) first, and then try to reinstall CF 10.
    Regards
    Anit Kumar

Maybe you are looking for