NI-VISA (no access permission)

Hi,
I have 5 systems running one version of labview software and all but 1 is working properly.
the one that is not is having a memory leak.
This one also have (NI-ViSA with no access permission) icon on the lower right hand corner.
All the others does not say so.
I am very sure it got to do with NI-VISA but i have tried upgrading NI-VISA and that didnt solved the problem.
Can someone guide me on fixing this?
thanks
Best regards,
Krispiekream
Solved!
Go to Solution.

I'm pretty well stumped.
Maybe this from the VISA User Manual helps:
How to Configure and Use Remote NI-VISA
On the server machine (the one to which the hardware is connected), you
must install Remote NI-VISA Server. This installation optionmay not exist
in all NI-VISA distributions. By default, the server is disabled and access
from any other computer is disallowed. Use the NI-VISA configuration
utility (MAX onWindows, visaconf on UNIX) and make sure the server
is enabled. You must also specify each address or address range of the
computer(s) you wish to allow access. An address can be either in dot
notation (x.x.x.x) or the network machine name; an address range can only
be in dot notation (x.x.x.*).
On the client machine, no configuration is necessary. The VISA resource
string contains the server machine name and the original VISA resource
string on the server: "visa://hostname/VISA resource string".
The hostname can be represented as either an IP address (dot-notation) or
network machine name.
If you want to search for all resources on a specific server, you can pass
"visa://hostname/?*" to viFindRsrc(). On Windows, you can use
the “Remote Servers” section of MAX to configure NI-VISA to access
certain servers by default. In this case, using "?*" will cause
viFindRsrc() to query all configured servers as well as the local
machine. If you want to limit the query to the localmachine only, regardless
of whether it has been configured to access any remote servers, pass "/?*"
as the expression to viFindRsrc().
Remote NI-VISA supports the complete functionality of all attributes,
events, and operations for all supported hardware interface types.

Similar Messages

The build directory of the test run either does not exist or access permission is required.

i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
Roey

Hi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible that network access permission control in acs 5.1

Hello
We have ACS5.1, WLC 7.0 and using 802.1x to authentication users.
Anybody know how I can configure network access restriction with using internal user group information.
For example, under the same SSID(like that "test") , same VLAN ID.
But two different user group has a different network access permission.
One group has full permission and the other has a limit network access permission.
Is it possible?

The equivalent of a NAR would be ACS 5.1 returning an authorization profile after authentication. Just configure your authorization policy to return one profile for one group of user and the other profile for the others.
Now to restrict access to the network, I think you're best with an ACL ? So link ACLs to your profiles.
Nicolas

How to List view web part to display document library for only users with access permission

Hi
I am trying to accomplish this requirement but I don't know if that is possible or how to get there. Any suggestion or advice are helpful.
On a site collection, I have several document libraries, with each library have unique permission to a few user or SharePoint group.
I want to create a web part page and make that the site home page. On this web part page, I want to create a Content Search Web Part to list the content of the document library that the logged on users have permission to see.
Is this possible with CSWP or is there anything easier or if it is not possible at all, please advise.
Thanks
Swanl

Hi ,
Based on your description, my understanding is that you want to create a Content Search Web Part to list the documents that the logged on users have access permission.
It is feasible with CSWP, you can follow the below step:
Edit Content Search Web Part->Change query-> Select a query: Items matching a content type (System); Restrict by app: Current site collection; Restrict by content type: Document.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]

Running a report on web : donot have access permission

hi ,
i am installing Oracle clinical 4.0.3 January 2003 version
and in that Web and Reports server on windows 2000 using
Oracle 9i Application Server Release 1.0.2.2.2a
Amongst the talklist given ,one step isto " Test connections to Oracle Developer6i "
a) run a form on web : successful
b) run a report on web : it says
start --> programs --> Oracle Reports 6i --> Run a report on web
report tester page opens
(drive/oracle/806/Tools/web60/html/runrep.htm )
on clicking 'run' User Authentication page opens,
on submitting this page I get the following page ( expected to display success screen)
FORBIDDEN
donot have access permission to /dev60cgi/rwcgi60.exe/setauth on this server..
URL of page is : http://machinename.domain:port/dev60cgi/rwcgi60.exe
what to do ??????
Thanks and Regards

It seems you did not set the Permissions on the Table or view, aUnder Database objects, find your table or view, and grant access to PORTAL, PORTAL_PUBLIC or PUBLIC as needed

Problem with default file access permission

Hi,
I am accessing a common area '/NFS_DATA' by both my java and oracle codes by the users 'javaUsr' and 'oraUsr' respectively.
As per the requirement, the oracle code (oraUsr) needs to create some file in the specified location and then the java code (javaUsr) needs to update those files (created by oraUsr) with some new data.
At present scenario the 'oraUsr' creates files with default access permission 644, which does not permit 'javaUsr' to update them.
Constraints : I am not supposed to set umask at the .profile of 'oraUsr'.
Execution of any shell script from oracle procedure is not permitted.
Is it possible to specify file-system specific default file access permissions??
Any idea to overcome this issue??

Hi,
I am accessing a common area '/NFS_DATA' by both my
java and oracle codes by the users 'javaUsr'
and 'oraUsr' respectively.
As per the requirement, the oracle code
(oraUsr) needs to create some file in the
specified location and then the java code
(javaUsr) needs to update those files (created
by oraUsr) with some new data.
At present scenario the 'oraUsr' creates files
with default access permission 644, which does
not permit 'javaUsr' to update them.
Constraints : I am not supposed to set
umask at the .profile of 'oraUsr'.
Execution of any shell script from oracle
oracle procedure is not permitted.
Is it possible to specify file-system specific
default file access permissions??
Any idea to overcome this issue??You might like to try using File ACLs
man setfacl(1)
as oraUsr
setfacl -s user:oraUsr:rw-,user:javaUsr:rwx,group::r--,other:---,mask:rwx file
This way the oraUsr can not execute file
but javausr can
getfacl will show the ACL
user::rw-
user:javaUsr:rwx #effective:rwx
group::rw- #effective:rw-
mask:rwx
other:---
hope this helps a bit

File access Permission numeric value 640

Hi,
I am picking up the files from one ftp directory. The file has access permission with value 640. When I am connecting to FTP Server with user id & passwrd I can move the files from from the directory to Arch directory. But when I am testing this with XI it is showing error in Adapter monitoring as "FTPEx: 11260001.bwh: The file access permissions do not allow the specified action".Any suggesting on this.
Regards,
Daniel.LA

Check this and this should solve your problem
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https:///message/589420#589420 [original link is broken]

Ask user filesystem access permission only when necessary

Hello
Sorry I can't find an explicit title.
I try to remove my applet signature to avoid the startup security dialog which is not user-friendly.
But my applet offers the possiblity to save something on the user file system that can't be done without signed applet.
Is there a way to ask the file system access permission just when it is mandatory, like the PrintUtilities.print() does?
Thanks you in advance

Hi ,
Thanks for you reply.
I will try this out and will let you know the results.
Are you talking about "setting default home page" for the user ,in your last line of reply ?
I think , this is the case when user clicks on Home link then this default page will be rendered. Am i right ?
Is there any docs which can tell all about the Access Privileges and also tells about how to play with Role Based Security in Oracle Portal Server ?
Thanks Again
<Neeraj Sidhaye/>
Try_Catch_Finally AT YAHOO DOT COM
http://ExtremePortal.blog.co.uk

FIELD WISE Access Permission????? Help me

Hi all,
<b> I want to specify the Field level of Access Permission for the SBO Users. </b>
For Example
i) I have one Screen named 'SALES ORDER AMENDMENT'
ii) Here i added four checkboxes for the CGM,HOD,Manager,Supervisor.
<b> If the Manager login into the Company he only access the Manager CheckBox.Like that all users.</b>
Please give Solution for FIELD WISE Access Permission .
Regards,
G.Suresh.

Hi Suresh,
You can do this in a couple of ways. Herewith two suggestions. I suggest you add a user-defined field to your user's window that will specify whether it's a CGM, HOD, Manager or supervisor or normal user. Then you can get the details of the logged in user when the add-on starts up using a query or the user object.
Firstly, when you custom form (sales order amendment) is loaded you can disable the check boxes that does not belong to that user.
Secondly, you can also check whenever these check boxes are checked (check on before action) what the permission for the user is and if he doesn't have access, set the BubbleEvent to false, this will mean that the user will not be able to change anything on the controls that is checked, unless he has access.
Hope it helps,
Adele

Class VIs for access to private Data: reentrant or not?

I just created in a class some VIs for access to private data (my German translation). I'm talking about these VIs, which enable you to connect your class object to a property node to read or write private class data. These VIs are by default non-reentrant. My question is: what happens, if I try to access two objects of the same class with these property nodes? Does the second object have to wait for the first one to be read? If yes, can I circumvent this by making these VIs reentrant?
Regards,
Marc
CLD
Solved!
Go to Solution.

In theory yes. In pratice it will depend on what you are doing in the private method and the methods it calls.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Virus make your access permission disables

Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item"
The Virus make your access permission disables.
Whenever you are click the exe files or you are trying to open Control panel a message come like Windows cannot access the specified device, path, or file. You may not have the appropriate permission to access the item"

Possibly you have an virus on the notebook.
Try to remove this using Antivirus software
Im using Avira Antivir because it for free and its nice.
If this will not work, you will need to reinstall the OS.
Bye

Update Error: No access permission as table is already locked

Hi All,
I am trying to reload work order master data but keepp getting the update error "No access permission as table is already locked". I have looked at sm12 but no lock entries found.
Pls advice.

Hi Ola,
Have you checked RS12 tcode for master data locks?
Best regards,
Eugene

Java visit microsoft access database question

I want to visit microsoft access database,like follows:
String dirverClass="sun.jdbc.odbc.JdbcOdbcDriver"; String url="jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)}; DBQ=C:\\apache-tomcat-5.5.27\\webapps\\Test\\db.mdb"; String content=""; try{ Class.forName(dirverClass); Connection conn=DriverManager.getConnection(url); Statement stmt = conn.createStatement(); String sql="select * from mytab"; ResultSet rs = stmt.executeQuery(sql); while(rs.next()){ content=rs.getString("zd1"); }
My question is whether I must install microsoft access database?
Thanks

Far as I know and have been able to determine a MS Access ODBC driver comes with every windows install going back to about windows 98. Might be 95 as well.
I haven't looked at some of the more exotic ones like the 64 bit versions nor the mobile versions.

CmdLet to list all mailboxes on which an account has full access permission

Hi, there
Just wondering what cmdLet can list all mailboxes on which a specific account has full access permission,
thanks

This should help you...
Get-Mailbox -ResultSize Unlimited | Get-MailboxPermission | where { ($_.AccessRights -eq "FullAccess") -and ($_.User -like "*SpecificUserAccount*") }
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com

Exchange Admin without the right to assign / revoke the Full Access Permission

Hello,
I would like to create Exchange Administrator who can do all mail box related administration except assign/revoke Full Access Permission and Send As Permission to other users' mail box or hims own mail box.
Exchange: MS Exchange 2007
OS: Windows 2008

You would have to regularly update his rights on the mailboxes - you can't grant the rights to the distribution group and have them apply to the mailboxes it contains. This means that when someone moves from his department, you would need to immediately
have to remove his rights from that mailbox, since just basing his rights on mailboxes in the group would add more members, but never remove him from existing ones.
For instance, in your list above, Bill manages John, Paul, Jim, and Harry. Suppose Harry moves from Bill's department, and Dave joins it. If you just go by group membership, Dave would get added, but there's no easy way to see that Harry is no
longer in the department. You would either have to mark this in the notes of the group ("Harry left 3/16/2015'), or you would have to immediately remove Harry from the group. Consider if Harry was promoted to Bill's level - he wouldn't want
Bill to have rights on his mailbox just because he had them when he was Bill's direct report.
As for a script you can run each week to add the mailbox rights, that's pretty simple. You'd use
Get-Group <group alias> | % { $_.Members } to get the list of group members, and you'd use
Add-MailboxPermission $ChkMbx -User $_.Alias -AccessRights FullAccess
to add the full mailbox access rights. The following would be a good starting point:
Get-Group <group alias> | % { $_.Members } | % {
Add-MailboxPermission $_.DistinguishedName -User <manager alias> -AccessRights FullAccess
I'll caveat this response - I have Exchange 2010 and don't have an Exchange 2007 system to check the commands or their syntax with. Your mileage may vary.

NI-VISA (no access permission)

Similar Messages

Maybe you are looking for