NI Vision Assistant trial version doesn't allow LabView code generation

Hi,
I am trying to evaluate NI Vision Assitant 8.5. When I attempted "Create LabView VI..." available in the 'tools' menus I get an error message indicating that it needs LabView 7.1 or higher and IMAQ Vision 8.2.1 or higher. As I already have necessary LabView versions I downloaded IMAQ Vision 8.2.1 from NI web site but it appears IMAQ is not availabe for trial. It asks for an activation code which I dont have. Are there any trial codes availabe for NI IMAQ Vision 8.2.1 or higher?
Thanks

Hi manyam,
NI IMAQ Vision (I presume you mean NI Vision Acquisition Software) contains three drivers (IMAQ, IMAQdx, and IMAQ I/O), only one of which requires a license (IMAQdx). You should be able to evaluate NI Vision Acquisition Software for 30 days by skipping the activation when it prompts. Was this option available?
Bill E. | Applications Engineer | National Instruments

Similar Messages

I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

You're talking about the dock?
To check on that, go to System Preferences > Dock > indicate your preference.
I can get iTunes up, and safari, but i don't know how
Not sure what you mean - if you can "get it up" - does that mean you can launch it? What do you not know?

Lr4 trial version doesn't open on my Mac Pro?

Lr4 trial version doesn't open on my Mac Pro? Error message: (com.apple.installer.pagecontroller error -1.). Any ideas are appreciated.

Try running an Apple software update on your Mac.
See http://forums.adobe.com/thread/1081486

PS CC trial version doesn't load. I get this message from Windows ... "has stopped working".

PS CC trial version doesn't load. I get this message from Windows ... "has stopped working". I have used PS CC once successfully and still have 19 days on the trial. How can I get PS CC to work?

adobe photoshop cc 2014 has stopped working in windows 8
Take a look at this thread and see if it is any help.

Master Collection turns into trial version - 30 days later serial code doesn't work (MAC)

Last year I bought Master Collection for my Mac. I had a lot of fun with it till suddenly a trial version notice started popping up every time I started PS. I ignored it because I didn't really care, to be honest. I thought it was a mistake or whatever, but 30 days later it really stopped working and started asking for my serial code. I entered it, but it said it didn't recognize it. I updated all of the programs and entered it again and it then said the serial code didn't belong to Master Collection.
I'm really desperate because I need PS, but I'm not willing to pay for it AGAIN...

Some student licenses actually did expire.
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

How to update trial version to full using activation code just downloaded

Can anyone help with this - there seems to be no way of doing this. I just got the activiation code sent thru for the full version, mainly to save having to do mail order/go to shop, but how do you update the trial?? The trial version hasn't converted automatically as is implied on the invoice! Thanks SA.

Hi,
It seems return table contains many errors and all errors cannot be sorted out at once. Try to correct one by one.
E MEPO 002 PO header data still faulty
W ME 658 Please also populate interface parameter
POHEADERX
For the above errors, Try to populate POHEADERX to the BAPI "BAPI_PO_CHANGE".
W ME 887 Error transferring ExtensionIn data for
enhancement CI_EKKODB
Also please ensure the data must be transferred to extension structure.
E SG 105 Enter rate INR / rate type M for 07.02.2014 in
the system settings
Maintain the exchange rates properly through the OB52 transaction. TCURR table will hold these values.
Please try and let me know what other issues you are facing.
Regards
Gangadhar

So I want to use an imaging device with Vision Assistant then incorporate that into my LabView 8.6 code. How can I do this?

So here's what I have so far written, I have LabView program to interface with my microscope stage, autofocus. I want to try now to interface the camera using Vision Assistant.
The procedure I want the program to perform is taking this CR-39 detectors and placing them on this stage and the camera to take images of this detector frame by frame. So I want the program to go to the very top corner of the detector on the stage. Then the camera would autofocus (if needed) and take an image. So this would take an image for every micron of the detector on that row. Then move to the next and so on. Until it has successfully imaged the whole detector. Is anyone well versed on Vision Assistant and willing to give some advice on this? It would be greatly appreciated.
The purpose is eliminate the previous method of acquiring images by manually focusing on the tracks created by the particles. I want to this program to run itself without a user being present, so just pressing a button would send the program into autopilot and it would perform the procedure.
What are CR-39 detectors?
Allyl Diglycol Carbonate (ADC) is a plastic polymer. When ionizing radiation passes through the CR-39 it breaks the chemical bonds of the polymer and it creates a latent damage trail along the trajectory of the particles. These trails are further ethced using a chemical solution to make the tracts larger which can finally be seeing using an optical microscope.
Thank you,
HumanCondition

Hi Justin,
Yes I already have a vi that controls the stage.
So the camera is stationary above the stage. Now what I want to do is get the camera to take the pictures of the detector by moving the stage frame by frame for example starting from the top right corner of the detector (by taking an image) then ending on the top left corner of the detector (by taking an image) then having the stage move down a row and starting the process over again until each frame (or piece) has been imaged.
My goal is while the stage is moving to every little frame of the detector I would like for it to autofocus if necessary, and take a image to be for each frame of the detector.
Using the auto focus requires the moving of the stage up and down.
HumanCondition

I downloaded a trial version, wich is the activation code?

I was trying to install a trial version, but I cant access because a have to enter these digits.

A trial download will not ask for activation code until it has entries in host file.Download Adobe Creative Cloud apps | Free Adobe CC trial
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   On Windows XP navigate to following location:
   \windows\system32\drivers\etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree

NI Motion Assistant LabVIEW Code Generation Error

Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.

Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi ‏9 KB
1 axis movement.zip ‏8 KB

Free vision assistant download

i need vision assistant trial version. how can i get?

That does not say free cloud... it is for the 30 day trial
No, there are no Cloud programs without a subscription
Some general information
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

Photoshop CS5 trial version has stopped working. Will the Full version do the same?

Once I try to open a file or create a new file in the trial version it stops working and Windows closes the program. I have read on the forum that others had this problem so I tried the solutions without luck. A sales live chat guy tonight told me that the trial version will not allow a lot of the features and I should have no problem with the full version. Does anyone know if this is accurate? That is a lot of money to spend for a full version to stop working when a file begins to open.

Hi Iamrami,
You've posted in the forum for Photoshop.com (an online service and product info portal).
For a speedier response regarding Photoshop CS5 iisues, please repost here: http://forums.adobe.com/community/photoshop.
thanks,
- Don

FLV File support in PE7 Trial Version?

I just downloaded and installed PE7 Trial version. My main interest in this version was to be able to edit .FLV video files. I've noticed in some reviews PE7 is able to upload .FLV files to Youtube. Well the trial version doesn't appear to suport .FLV files for editing. The trial version install procedure mentions that not all features of PE7 are included in this install. My question is does the full PE7 version support editing .FLV files?

You can not import and edit FLV files in PE7, it will only export to FLV. It can import and edit SWF files. If you want to edit FLV files you will need to convert them to another format, ideally DV-AVI. You could do an internet search for a free converter (there are a few) or purchase one.

The old version had a home icon to return to the main page but this version doesn't appear to have one

the old version had a home icon to return to the home page.
This version doesn't allow me to do this when I want to leave
a website and return home. Is this something I can add in the browser bar?

It's now at the far right end of the address bar. If you want to put it somewhere else, you can do this:
View > Toolbars > Customize
and drag the Home button into the window, then drag it bakc out to wherever you prefer.

Registering Standard Object on SAP NetWeaver 7.01 ABAP Trial Version

Hi guys:
I´m trying to manually apply the SAP Note 1465965, to make several tests regarding this funcionability on the Trial Version; before to activate it on our "Real" system.
Because the table to create is a SAP Object the system is asking for:
Enter the key for
the object       R3TR TABL SCICHKV_ALTER
SAP Release      701
Access key
Installation     DEMOSYSTEM
It is possble to request this access key to SAP, I already request the trial license, but I don´t see where I can generate this access key.
Thanks in advance.
Joel Antonio
Edited by: Joel Antonio Rivera Gutierrez on Dec 13, 2011 12:02 PM

Joel ,
With the Netweaver ABAP Trial version youu2019re not allowed to alter SAP objects. Instead you can create any local objects with a name Z or Y as the 1st char.
Access key is a known issue for the trial version. Iu2019ve read several posts about this magic key, none worked for me.
Have fun.

NI Vision Assistant trial version doesn't allow LabView code generation

Similar Messages

Maybe you are looking for