NI VST Compatibility with RF Measurement Suits and toolkits

Dear all
I Hope this message finds you all well
I need to know more about the compatibility of NI Vector Signal Transceivers (VST) with the available RF Measurement Suits.
The below information is what I have gathered so far , since there is no compatibility chart available to help :
NI WiMAX Measurement suit (Not Compatible with VST):
In the Datasheet , It is mentioned that the compatibile hardware is
RF vector signal generators : NI PXIe-5673 and NI PXIe-5673E
RF vector signal analyzers : NI PXIe-5663 and NI PXIe-5663E )
NI GSM/EDGE measurement Suit : (Compatible with VST).
NI WCDMA/HSPA+ Measurement Suit : (Compatible with VST)
NI LTE Measurement Suit : (Compatible with VST)
In the Datasheet of all the 3 measurment suits (they are only one Measurement suit called NI Cellular High performance Test system) , it is mentioned that they are compatible with the NI VST Hardware
NI Wireless LAN Measurment Suit : (Compatible with VST)
In The Datasheet of the WLAN Measurement Suit , the VST is mentioned as a compatible hardware.
NI Bluetooth Measurement Suit : (Not Compatible with VST)
In it's Datasheet , it is mentioned that "The NI Bluetooth Measurement Suite is a software-defined approach to Bluetooth testing. With this solution, you can generate and acquire Bluetooth signals using vector signal generators (VSGs) and vector signal analyzers (VSAs)." , No VST was mentioned
NI GNSS Toolkit : (Not Compatible with VST)
In it's catalog page , nothing is mentioned but the NI PXIe-5672 RF Vector Signal Generator
Kindly I need confirmation about the above data , since I am not sure about it . in addition , some white papers are mentioning that the VSTs can be used with the RFSG and RFSA APIs , does that mean that the Measurement suits and toolkits supporting RFSA and RFSGs only will work on the VSTs as well ?
Thanks in advance
Eng. Mohammed Ashraf
Certified LabVIEW Associated Developer
InnoVision Systems Founder, RF Test Development Engineer
www.ivsystems-eg.com

Hi Mohammed,
I've spoken with R&D and determined that the NI Bluetooth Measurement Suite is VST compatible. The NI GNSS Toolkit is also VST compatible, but only through the VST Instrument Design Library and not through the NI-RFSG driver. The NI WiMAX Measurement Suite is not VST compatible.
Hopefully this information is helpful!
Josh B
Applications Engineer
National Instruments

Similar Messages

Windows 7 Compatability with Labview 8.0 and missing files while interfacing the FPGA with LV

I am trying to use an FPGA (PCI-7830R) with Labview 8.0. The computer has Windows 7 OS. I installed LV 8.0 in the proper order with the FPGA Module and labview is able to see the FPGA when I open a .lvproj (the FPGA is in the tree) however there is a warning symbol next to the FPGA selection and when I try to open a .vi file that is used on the other stations in my lab (it works on all the other stations), labview is unable to find a whole bunch of files. There are some pictures.
Missing File (there are a bunch more but this is the fist one).

According to this LabVIEW Compatibility LabVIEW 8.0 is NOT compatible with Windows 7
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

Font compatibility with Office (for Mac and Windows)

Hi,
Despite extensive searching, I'm struggling with a font compatibility issue between my Mac and my colleagues' PCs. The main points in order:
The fonts work correctly on both my Mac and other PCs.
The font in question is HelveticaNeueLT Std, rolled up into which are several different weights. The files are OTF files. The same files install without any problems on all the computers in question (and show up in Font Book). And the font can be used successfully:
- in Keynote, I select Helvetica Neue LT Std, and underneath choose whichever weight I want
- on PCs, the font and weight can be selected from the drop-down list in MS Office.
- in Office for Mac 2016 (Preview), I cannot select the font from the drop-down list, but can hit Cmd+T, and then select the appropriate font and weight under 'Latin text font'. What is odd is that in the dropdown list, only a particular weight/typeface is shown:
As this is a preview version, I wouldn't expect Office to work perfectly just yet...
When a file is created on a PC, it works fine on my Mac.
Every file I have attempted to open that was created on a PC, and using these fonts, works fine. The fonts display correctly (i.e. including the correct weights), and I can work with the document without any problems. The only odd bit: sometimes in the dropdown box on my Mac it then says (null):
Whereas at other times, the font name shows correctly:
Both of those examples were created using the 'Thin' weight of HelveticaNeueLt Std. I can't see any pattern as to what causes this inconstency.
The problem is that what I create on my Mac shows incorrectly on a PC.
If I create anything using Office 2016 or Keynote, selecting the preferred weight as described above, it shows just fine on my Mac. But when I send the PPTX file to a PC, all weights look identical (it looks as though the PC has just displayed everything in a standard weight). This is the problem I am trying to solve.
To try to get around this, I tried the process of removing the Helvetica/Helvetica Neue .dfont files that come with the Mac - but this didn't work and caused several other problems. Besides, the font I'm trying to get to use as intended has a different name.
All help would be greatly appreciated - my thanks in advance.
John

Thanks Kappy and apologies if it is inappropriate - but just to clarify, my main question is whether fonts used in Keynote should be compatible with other software (in this case Office running on Windows). The Office for Mac Preview is a bit of a red herring but I thought it should be mentioned.
I tried to clarify my first post, but it didn't work. What I wanted to add was simply whether Keynote handles fonts in a way that other pieces of software struggle to read - despite the font itself working perfectly in both environments.

Compatibility between Oracle Developer suit and application server

Hello
We are going to user oracle 10 to develop and deploy our application.
The tool that we were going to use are
Developer Suite 10g Release 2 (10.1.2) and
Oracle Application Server 10g Release 3 (10.1.3.2.0)
But i need to know whether this are compatible
Where can I find any documentation related to compatibilities between developer suit and application server ?
May thanks in advance

Hi Ana,
Compatible version of IAS is
10g Release 2 (10.1.2) or 10g Release 2 (10.1.2) with patch 1(10.1.2.1.0)
Also if u are using only forms and reports services there is a forms and reports standalone version is available. And hence u dont need to install infrastructre.
And this is a very compact product.
Even if you use forms 9i /developer suite 9i to develop the forms, when u compile them on IAS, it gets upgraded. There is not much diff between forms 9i and 10g
Rajesh Alex

Logic Pro X compatibility with mbox 2 mini and 2009 core duo macbook

I currently have Pro Tools LE 8.0.3 and an Mbox2 Mini, both of which amazingly still work on Mountain Lion 10.8.4. I'm interested in learning Logic and am trying to confirm compatitility with the Mbox2 Mini on a first generation core duo Aluminum Macbook (2.4 Ghz) running 4gb of RAM. The system requirements just say 10.8.4 or later with a 64 bit processor. The Macbook runs fine, and I primarily just record stereo piano tracks, so it's not like I'm going to have 16 tracks running on it. Anyone using an Mbox2 Mini, and any issues with the hardware?

It's not an external device's compatibility with LPX that matters...
It's your external hardware's compatibility with whatever OS X version you are using to run LPX in.... that is important.
Im guessing you upgraded OS X about the same time you switched to LPX?
So....
Make sure you have installed the drivers and software from this page....
http://www.apogeedigital.com/support/quartet#tab-id-1
Failing that, contact Apogee support for further assistance
http://www.apogeedigital.com/support/contact-support
Note: Why is it showing Duet and not Quartet briefly? Are you sure you installed the correct drivers or did you, at one time have a Duet?
Additional: You might want to try this.. though I doubt it will fix things... but this can cure all kinds of weird issues...
Delete both the main plist and the CS file...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
Restart the computer.
Note: if you cannot find either of these files you didn't follow the instructions exactly as described

When is Firefox 4.0 going to be compatable with my AVG Antivirus and toolbar????

I upgraded to Firefox 4.0 and it said that my AVG is no longer compatable with this version. When is the new version going to be compatable, as now I do not have my AVG toolbar and dont feel secure using Firefox 4.0.

The best bet would be to contact the add-on developers and let them know you'd like to use their extensions on the new version.
You can use [https://addons.mozilla.org/en-US/firefox/addon/15003/ Add-on Compatibility Reporter] to do this.

Report Generation Toolkit Compatibility with Microsoft Office 2013 and LabVIEW 2012

Hello community,
on this page there is shown the Report Generation Toolkit Compatibility with Microsoft Office and LabVIEW.
In our company we use actually LabView 2012 and it works perfectly with MS Office 2010.
Has anyone ever tried the "Report Generation Toolkit" of LabVIEW 2012 with MS Office 2013? Does it really not work? Has anyone an emirical value for this topic?

Hi digital_badger,
as you sure have seen in the link it is not officially supported by NI, which means to you one of the following things:
1. You could upgrade your LabVIEW and your Report Gerneration Toolkit to Version 2014 and use MS Office 2013
2. You could just try it with MS Office 2013 which might work but if it's not working you don't get any support from NI.
Even if someone tried it already and it worked for him does not mean that it will work on your machines. It is possible that on some of your machines it could work but not on others. Their can be a lot of problems while playing around with unsupported setups.
3. You could leave your setup as it is and stick to your MS Office 2010.
I hope I could give you a good answer to your question

Integration Scenario with Oracle SOA Suite and SAP

Hi to all
I have the following integration scenario:
The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
But, I want to hear options, possibilities and comments. Where I find information related ?
Thank you very much
Dario

Hi Rodriguez ,
you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library for integrating SAP system .
you can find more information in given link -
http://www.oracle.com/technology/products/integration/adapters/dev_support.html
Regards,
Amit Shivhare

Mac Pro Compatibility With Older SATA Drives And DVI Connectors

I soon plan to replace my 5 year old G5 with a new Mac Pro and need two questions answered so that I will know what options i have for the transfer of older data and apps. The Apple web site for the Mac Pro includes the following paragraph which gives me reason for concern:
Your Mac Pro includes four drive bays, allowing you to configure it with
up to 8 terabytes of storage using 7200-rpm Serial ATA 3Gb/s drives, up
to 2 terabytes of storage using high-performance solid-state drives, or
any combination of each type of drive. Configure each drive bay
separately.
Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
I currently have two internal SATA 250/300 GB Maxtors (Maxtor 7Y250M0 and Maxtor 6B300S0... both are 7200 RPM but I don't know the data transfer speed). Ideally I would get a Mac Pro with a single 1 TB drive, move one or both of these older SATA drives to the new computer, one temporarily and the other permanently in order to transfer data and Apps to the new machine. If this is not possible then the new machine will need to wait until after I get a new larger FW external drive to use as a data transfer medium (I had planned to do that anyhow). I need to do some advance planning for this so I need to know what to expect in advance. I noticed this possible wording ambiguity on Apple's description of the Mac Pro long ago, but now I need to find out the answer for sure. Apple, you need to be more specific with your words.
Can anybody answer this question for me?
My second question regards display connectors. Does the standard (no bucks added) display card include a standard DVI connector or only the newer Mini-DVI connectors. I think I see a standard DVI connector in the low res picture of the back of the Mac Pro but am unsure. My 5 year old Apple display bit the dust a year ago and I had to replace it with an HP 2009m display (mumble grumble) which does use a standard DVI connector. A new Apple display is too rich for my blood so I plan to continue using the HP display for now and need to find out if I will need a display adapter to go with it.
Many thanks to anyone who can answer these questions authoritatively.
For anyone who asks why I still run 10.3.9 on my G5, I can only answer response speed. New OS versions always act like a lead anchor on a machine with their added overhead and Tiger really does feel like a ball and chain tied to me... it just does not reaspond as fast as I do. I look forward to the speed of a new machine.
Phil Rogers
--

Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
Any commercial sATA drive will do just fine. 7200 RPM is not a requirement.
WD "Green" drives have caused user complaints about "long delay until ready" when installed inside a Mac Pro, but are fine for backups.
You are making the leap from PowerPC to Intel Mac. Eventually, you should re-initialize your old drives to GUID partition table for best responsiveness.
Migrating your System will not be possible. Use the pre-installed System or Install a new System on a GUID-partitioned drive with the release DVD in the box.
Migrating your Applications is a Bad Idea. You should plan on re-installing all your third-party Applications from their release discs.

Browser compatibility with 10.6.8 and security update

Hi. I'm running Snow Leopard (v10.6.8) on a mid-2010 quad-core Mac Pro. According to Apple Support, Safari v5.1.10 (which I am running) is the recommended version for this OS. It works great except that every so often I get a warning about Safari not being able to verify the identity of the website "name" and I have to flush the DNS Cache using a Terminal command which I found online. When I was connected to the internet using Airport, the warning was popping up frequently but after switching to an ethernet connection it's much less of an issue. Is this something I'll just have to live with or is there anything else I can do?
My next question concerns the Security Update 2013-004 that Software Update displays as being an available update. I've read a little about it and it seems to apply mostly to the newer Mac operating systems. Should I just ignore it or will it be of any benefit to me? I don't want to download and install it if I don't really need it.
Lastly, is there a particular version of Firefox that anyone would recommend for 10.6.8? I think Firefox 18 was the first version that would work w/ Snow Leopard. How much higher should I go?

What is your objection to not simply upgrading OS X to Mavericks?
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

HELP please with Nokia PC Suite and MAC

I have just bought the Nokia E71 and incredibly confussed with that instalation process of the PC Suite.
Is there a program that is suitable for MAC?

For Mac users Nokia has two different programs.
You can use isync for syncing your contacts and calender and Nokia Multimedia transfer for transfering music (help of iTunes) and photos(iPhoto). Also from NMT you can sync safari bookmark.
Nokia has different plugin for the device. you need to download the plugin for your E71 to start syncing with addressbook which is available in nokia website http://europe.nokia.com/A4299040
You can download NMT from here http://europe.nokia.com/A4423135 to start working on iTunes and iPhoto and safari bookmarks.
There some FAQ is available for mac users, you can refer this link http://europe.nokia.com/A4423136
Make sure you have installed all available updates from Apple using Software Update and your phone firmware is updated.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Reconcilliation with E-Business Suite and OID using DIP?

I am planning a E-Business Suite (11.5.10) / SSO (IDM 10.1.4.0.1) implementation using AD sync and WNA. On both the AD and E-Business Suite sides there are existing users with account names that do, and do not match. We would like to reconcile these existing accounts as part of the initial load into OID, rather than use the "link on the fly" or "auto link user" capabilities to link users on first login. I cannot see in the documentation how this would be approached using the DIP. Can anyone tell me if this is possible and if so point me in the right direction?

Ryan
You can do this by first loading your existing ActiveDirectory accounts to OID, and then updating the USER_GUID field on FND_USER table with the corresponding orclguid of the user entry on OID.
You can either update this table directly or use the FND_USER_PKG api. There are some notes on Metalink about this but they are intented for when you delete and recreate a user account with the same login. (ex, note 399117.1). But dont expect much help from support if you have trouble.
Also you can expect to have some trouble since there will be some logins only on Oracle Applications and your network admin might creates a new account with a login that already exists on Oracle Applications and is linked to a different login on the network.
Best Regards,
Luis

Ipod Nano Compatibility with Ipod Universal Dock and Remote

I have an 8GB Black 2nd Gen iPod Nano. I want to connect it to my stereo. I was told that the Apple Ipod Universal Dock would be a good solution.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E07A&nplm=MA045G/C
The website says that it is compatible with my nano, so no big deal right? I just wanted to make sure it would work fine with my iPod nano before I went and bought one. Does it come with the AV cable to connect the dock to my stereo / tv? DOes the dock have a graphical menu interface like some of the third party docks/remotes have?
Also, will the Apple Ipod Remote work with the universal dock?
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=BB5 E48CD&nplm=MA128G/A
The apple store website says that everything will be compatible, but I wanted confirmation from someone who has actually owned this or knows about this.
Can you offer any better docks/remotes ideas?
Acer Aspire AMD Sempron , 512MB, 60GB,15.4" Widescreen, XP Home Edition Notebook, AS3004WLCi - LX.A5505.A74 Windows XP

I was looking at the review CNET had for that Kensington dock.
http://reviews.cnet.com/mp3-player-accessories/kensington-entertainment-dock-500 /4505-6519_7-31631868.html?tag=uolst
I had a question about part of the review though, I am not sure I am understanding it correctly.
"We were impressed by the remote's ability to take control of our iPod; most of the third-party iPod-dock remotes we've seen only pause the music or video, skip tracks, and adjust the volume, not browse the menus. That said, the Entertainment Dock still isn't perfect. When you navigate the menus, your TV screen will be blank, so you must rely on the iPod's screen for your visual cues. Our other gripe is that the remote seems cheaply designed: The buttons on our review model looked misaligned (if usable), while the battery cover was annoyingly difficult to pry open. We got about 30 feet of range from the remote, which is more than adequate for most living rooms."
So this means that even though the remote can navigate the menus on the iPod, you wont be able to see what you are doing unless you go to the screen of your iPod?

Iphone 6 compatibility with belkin car charges and cables

Hey
upon reading stories of certain car charges not working with the iphone 6 i want to find out if either of these 2 car charges and cables from belkin will charge my iphone 6.
In theory the 12v 2.4amp charger should charge my phone up faster than the rest however the iphone 6 is not listed in compatible devices, strangely neither is it listed on the 10w 2.1amp version of this product.
Am i missing some sort of trick here? the only thing i can think of is that the iphone 6 has a list of compatible devices or (certified) and will not allow connection with either of these belkin devices.
here is the 12v 2.4 charger http://www.belkin.com/uk/F8J121-Belkin/p/P-F8J121/
Here is the 10w 2.1amp charger http://www.belkin.com/uk/F8J078/p/P-F8J078/
What exactly is the problem with using either of these? isnt it the same lightening connection as the iphone 5?

Belkin probably just hasn't updated the page yet. Give them a call or contact their customer support. Note that the maximum current an iPhone will draw from a USB adapter is 1 amp (5 watts) whether the adapter can supply 1 amp, 2 amps, or 100 amps. So it won't charge any faster than a 1 amp adapter. An iPad can use up to 2.1 amps.

My college has informed me that firefox 7 is not compatable with their online classes and I must go back to firefox 6 but you down load of 6 will not let me it is trying to force me to upgrade to 7 how can I get 6 back?

My school (Highline Community College) as advised me that firefox 7 will not allow people to use the (Angel) online e-mail system. I need to stay in contact with my teachers. They said don't get firefox 7 but I already have it. They said go back to firefox 6 which they even provide a link for but when you upload it it says this is an old system click here to get 7. I already have 7 and know it will not work. How can I get 6 back.

I have the same problem. It was literally snuck in as a simple update and suddenly I couldn't upload any of my assignments. You can get rid of 7 by going to control panel and removing the Mozilla file. then look for the FF 6 upload. I warn you though. It REALLY wants to be 7. Don't allow any updates to happen or you will be in the same position.
I like Firefox and it is truly disappointing that they would force this situation. My nest step is back to IE 8 which wants to be 9. Arghh!

NI VST Compatibility with RF Measurement Suits and toolkits

Similar Messages

Maybe you are looking for