NIC only works at 10 Mbps/Half Duplex

Ever since I got this MOBO (almost 1 year ago), I have not been able to connect faster than 10 Mbps/Half Duplex with my ADSL modem. Any attempt to change speed will result in Windows indicating tha the cable is unpluged (Auto mode does not work either). I've updated BIOS, NIC drivers, I've installed WinXP (and re-installed) with and without SP1 and SP2. I've also changed cables with no luck.
I got an external NIC from a friend and could connect at 100 Mbps/Full Duplex so the problem is NOT on the modem side.
System info shows the internal NIC shares IRQ 18 with a USB controller wich I uninstalled just to see if it would make a difference. Same results.
I've just installed the latest drivers from INTEL and I'm still getting the same problem.
Any ideas?
Help will be greatly appreciated.
Abraham

Don't know how to fix this but I had the same problem when I was connected directly to my cable modem. I eventually got it to run manually at 10Mbs-full duplex and didn't worry about it further since that's faster than actual transfer speeds from my ISP anyway.
I then configured a wireless network using a Linksys router and noticed that my NIC now automatically connects at 100Mbs-full dupex as it should.
If you feel this limiting your actual transfer speeds(it wasn't in my case) you might consider purchasing an inexpensive router. This will also give you the benefit of having a hardware firewall.

Similar Messages

Solaris 8 on a Sun Fire v480 (full vs half duplex)

Hi All
I've installled Solaris 8 on a Sun Fire v480.
Now, when I boot I get the following (via serial A/LOM):
{2} ok boot -r
Boot device: /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w2100002037cfdf9d,0:a File and args: -r
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: ce0.
Hostname: abcdef
WARNING: ce0: fault detected external to device; service degraded
WARNING: ce0: xcvr addr:0x01 - link down
Configuring /dev and /devices
NOTICE: ce0: fault cleared external to device; service available
NOTICE: ce0: xcvr addr:0x01 - link up 100 Mbps half duplex
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s5: is clean.
/dev/rdsk/c1t0d0s7: is clean.
starting rpc services: rpcbind done.
Setting netmask of ce0 to 255.255.224.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway abcdef
syslog service starting.
Print services started.
volume management starting.
The system is ready.
abcdef console login:Dec 22 11:01:34 abcdef picld[70]: Device PS1 AC UNAVAILABLE
Dec 22 11:01:35 abcdef picld[70]: FSP_GEN_FAULT_LED has turned ON: 1 failed device(s)
abcdef console login:
My question is what is going on. I see 2 things:
1)
NOTICE: ce0: fault cleared external to device; service available
NOTICE: ce0: xcvr addr:0x01 - link up 100 Mbps half duplex
what does the first line means and why half duplex and not full
2) FSP_GEN_FAULT_LED has turned ON......
hmmm, what does this mean ?
Any suggestions to help me untangle those messages ?
Thanks a lot in advance
Luca

Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help..

FaceTime audio half duplex / doesn't work simultaneously

I gave my parents a new iPad Air for Christmas. Note: They are 'older' and have a lot of trouble operating electronic devices. Before sending it to them I did check for recent updates, set up their email and contacts, installed some apps that I find useful and uploaded some photos. Otherwise it's a fresh unit right out of the box.
Yesterday we tried facetime with them. The video worked as it should. The audio seemed to be in a 'half duplex' mode on our device. Meaning, they could hear us perfectly and normally on the iPad. We could only hear them when we were perfectly quiet. Any sounds or talking on our end would mute their transmission during and about 1 second after speaking.
We tried multiple calls. (I called them and then they called me). We tried an iphone 5 and a MacBook, the problem was consistant in all cases. During one of our calls on the mac, my brother placed a facetime call to my phone and his connection worked perfectly, while my parent's connection continued to have the issue.
I sent them the following instructions, in hopes that it may fix the issue, but I'm doubtful. I don't have an iPad handy (only iphones and the mac in our house) so there may be some settings that are present on the iPad and not on the iphone that they should try. Any and all help would be appreciated! They live on Kauai, HI so if there are any places there that would be helpful that they could visit, I would appreciate the recommendation.
Go into settings, scroll down until you see facetime. Select it. There will be some settings for facetime. One simply says facetime and there is a small green slider button next to it. Touch the button. It should slide and turn white. This disables facetime.
Go to settings, then general, then software update. It should say "checking updates" and then will either display your version (7.0.4 ?) OR it will say there is a new update and you can download it. If so, download/install. (Should be a button asking and just hit yes or ok).
Next, do a network reset:
Go to settings, general, scroll down to "reset". Select reset and then select "reset network settings". It will ask if you want to do this and yes, you want to do it.
Next, After all this is done, reboot the ipad. This is done by pressing and holding the top (power/sleep) button and the home button down at the same time. Hold it for 30-seconds maybe longer until the screen goes black and then the apple logo appears. Then let go.
(If you hold just the upper button for 5 seconds a red slider will appear to allow you to turn off the ipad. For a reset just ignore that and keep holding down the buttons).
Once it reboots, add yourself back to your network. It may ask on its own, but if not :
Go to settings, then wi-fi. Select your network and enter your password.
Last, go into settings, general, facetime and turn it back on by touching the white slider button. It should turn green.
I found two other cases that sounded like mine:
https://discussions.apple.com/message/22808569#22808569
https://discussions.apple.com/message/22705969?searchText=Facetime%20duplex#2270 5969

My parents called apple tech support. I'm not exactly sure what they did, but I think they just rebooted the iPad again, as done previously. It seems to be working better now, although it does still cut out now and then from sounds on my end of the line.
Another thing that seems to have helped, I determined that my parents had left it in the original plastic packaging and then crammed it into the case I gave them, which may have slightly muffled their microphones.
Anyway between these two things it is working better. We can speak on this end and still hear them talking. But now and then it still cuts out.

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

Premiere CS4 Audio Effects Only Work On Latter Half Of Each Audio Clip

I'm currently working with Premiere CS4 on a Windows 7 PC and running into some audio issues when exporting the video. In the timeline when I playback the preview the audio sounds fine but when I export it the audio effects I applied in Premiere only work half the time. Each audio clip will play in it's raw form for a few seconds and then halfway through playing the Premiere audio effects will turn on. I have two audio tracks in my timeline, one for music and the other for narration. There are 10 video tracks in total for various masks, overlays, title, etc.
The sequence has 18 audio clips in total and each one has a separate EQ, Highpass, Volume, and Denoiser effect on it (most are similar but are fine tuned for each clip). So far I've tried exporting as an AVI, MP4, and WMV but each has the same issue. I've also tried exporting with and without the "Use Preview Files" option on the Adobe Media Encoder to no avail.
Has anyone else ever encountered this type of issue before or have any ideas on how to fix it?

Posting for anyone else who comes across this issue:
I was able to fix this by taking all of my audio clips and nesting them in a new sequence, which was then moved to the main sequence. I kept all the effects on their individual clips.

My spell check only works for about half of an article. Is there a way to fix this?

When I'm on a wiki, looking at an article, I sometimes see a couple spelling errors that just bug me, so I sometimes go in and fix them. However, when I pull up the editing page, the spell check only works for about the first half of the article. I can't find the errors if they're in the second half of the article. Is there a way to fix this?

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Any ideas why the sound only works on about half of my apps?

Any ideas why the sound on my ipad only works on about half of my apps?

The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck.

Simple TCP chat application half duplex not working for me

I m having a problem in TCP application working half duplex
My friend runs client program who is in near by city and i run the server program in my system
Let my ip address is 116.x.y.z
My server program is
import java.net.*;
     import java.io.*;
     public class tcpserver
         public static void main(String args[]) throws IOException
          ServerSocket s1=null;
          try
             s1=new ServerSocket(98);
          catch(IOException e)
             System.err.println("Could not find port 98");
             System.exit(1);
          Socket c=null;
          try
             c=s1.accept();
             System.out.println("Connection from"+c);
                                  catch(IOException e)
             System.out.println("Accept failed");
             System.exit(1);
          PrintWriter out=new PrintWriter(c.getOutputStream(),true);
          BufferedReader in=new BufferedReader(new InputStreamReader(System.in));
          System.out.println("I am ready,type now");
          String l=in.readLine();
          while(l!=null)
             out.println(l);
          out.close();
          in.close();
          c.close();
          s1.close();
     }The Client program is which my friend executes is
import java.net.*;
     import java.io.*;
     public class tcpclient
         public static void main(String arg[]) throws IOException
          Socket s=null;
          BufferedReader b=null;
          try
             s=new Socket(InetAddress.getByName("116.x.y.z"),98);
             b=new BufferedReader(new InputStreamReader(s.getInputStream()));
          catch(UnknownHostException u)
             System.err.println("I dont know host");
             System.exit(0);
          String inp;
          while((inp=b.readLine())!=null)
             System.out.println(inp);
             break;
          b.close();
          s.close();
     }Important Note: When i run this program specifying within my system its working ( i mean running the program in two different windows(terminals) its working for me)
When i give the client program to my friend its getting compiling for him but not running for him
Its showing him unknownhost exception and main method not found like this.
Please correct the above code or else just what kind of strategy we should follow in order to get rid of this problem
When i normally run this program in my system
the output when i run in my own system is
Output for running tcpserver.java
~\JDK2~1.0\bin>java tcpserver
Connection fromSocket[addr=/116.x.y.z,port=1930,localport=98] // in output i edit the ip address text
I am ready,type now
this is test text
Output for running tcpclient.java
~\JDK2~1.0\bin>java tcpclient
this is test text
My problem is its working in my system when it exceeds out the output is not available for me
Help me Please !!!

          String l=in.readLine();
          while(l!=null)
          out.println(l);
          }That will print the same thing forever. Make it the same as the loop in the client.
Important Note: When i run this program specifying within my system its working ( i mean running the program in two different windows(terminals) its working for me)Looping forever might be what you call 'working'. I don't.
Its showing him unknownhost exception and main method not found like this.Change this:
new Socket(InetAddress.getByName("116.x.y.z"),98)to this:
new Socket("116.x.y.z",98)although your friend may then run into connectivity problems ...

Help my MBP 2011's USB ports only work with powered devices

Hey.
My USB ports are only working with powered devices ( such as an interactive white board) they are not working wiht a USB modem, it picks up but doenst have the energy to dial out. it also doesnt work with a flash drive.
this is only recent after i updated non vital programs such as printer things.
now the other problem is that i have not updated this too recently but i dont mind losing some info.
ps. i have done all of the restarts such as smc, ram. pram. the only thing i have not done is take out the batt. but thats becuase its really hard to do and there are warnings all over it saying dont remove.
p.p.s i am running snow10.6.8
Please help becuase i need it to help teach some of my stundets and not being able to use a USB or the internet to research is impeeding my planning.
Thanks so much in advance
Andrew

One final detail. it is a 2011 early model. if there is any more details that you want please ask. i am very desperate because i dont want to take it to apple unless i have to.

Wired ethernet stops working on c2d MBP

I am a new 15 inch C2D MBP owner and I'm just starting to learn all the Mac stuff... I need your help because I have a serious problem with wired ethernet stability under macOS. I need to know if it's something specific to my machine or if anyone else has similar problem.
I am connected to a LAN with a 10/100 Mbit switch. I'm using a good cable (checked!). And my connection seems to hang from time to time. Usually this happens under heavier load (torrent plus multi-tab browsing), but it dies sometimes during casual browsing or checking for system updates. And it's anywhere from 3 minutes to 12 hours between hangs...
The symptoms are strange. The connection seems to be on, but there's a sudden surge in bad packet received number and the network connection stops working remaining on-line. Putting the machine to sleep or manually shutting down the line helps immediately. I'm using:
sudo ifconfig en0 down
sudo ifconfig en0 up
At first I suspected hardware problem but the same line works perfectly under Windows (with even higher load, and tcpip.sys patched to 1000 connections).
It acted like this from the very first moment I got it and I have no clue if I should contact service or wait for a patch or maybe just stick to Windows (just kidding)...
I've browsed the forum and it seems I'm not the only one with the problem:
http://discussions.apple.com/thread.jspa?threadID=649927
but this topic is unsolved... There's nothing really strange in system.log:
Dec 15 17:22:45 honsiu kernel[0]: AppleYukon: bad packet received. length: 20, packet status bits: Packet fragment
Dec 15 17:25:01 honsiu sudo: Janek : TTY=ttyp1 ; PWD=/Users/Janek ; USER=root ; COMMAND=/sbin/ifconfig en0 down
Dec 15 17:25:04 honsiu sudo: Janek : TTY=ttyp1 ; PWD=/Users/Janek ; USER=root ; COMMAND=/sbin/ifconfig en0 up
Dec 15 17:25:05 honsiu configd[41]: posting notification com.apple.system.config.network_change
Dec 15 17:25:05 honsiu lookupd[13803]: lookupd (version 369.6) starting - Fri Dec 15 17:25:05 2006
Dec 15 17:25:05 honsiu kernel[0]: AppleYukon - en0 link active, 100-Mbit, half duplex
Dec 15 17:25:06 honsiu kernel[0]: AppleYukon: bad packet received. length: 21, packet status bits: Packet fragment
Any hints appreciated. It's a beautiful machine and I'm so sorry it doesn't work as it should...
15inch C2D MacBook Pro Mac OS X (10.4.8)

evans_re,
does the trackpad not work? If it works, you could try selecting “Shut Down…” from the Apple menu.
As a last resort, you can hold down the power button for approximately ten seconds, which should force a (non-clean) shutdown.
If your keyboard is completely non-functional (excepting the power button), then you should take it to an Apple store or other qualified service facility.

Unable to use Auto setting or 100BaseTx in either full or half duplex!

Hi here is the issue, I have a small home network of three desktops, one laptop (wireless) and two game consoles with a WRTP54G router and cable modem. I have noticed that if I try to change the NIC setting on any device to either Auto or 100BaseTx in either full or half duplex the connection drops. The pc will say network unplugged, the minute I change it back to10BaseT in either full or half duplex it comes right back up! Before anyone asks yes my NIC's are 100BaseTx compatable. I have made sure all drivers are up to date. Has anyone had this issue? I would like to use 100Base Tx in Full Duplex! Any help would be appreciated!

hi. the auto sense feature of the router is not working anymore. i dont know if a firmware upgrade will help, but you can give it a shot.

Javascript only works for "easy" numbers (and multiplying error)

HIi Everyone,
I have a scripting problem. I used javascript to do some division and subtraction, but it only works some of the time in the second half of my form. What I mean is, if I'm using a nice even number like 100-the calculations are correct, but if I use 415.75, it calculates, but not correctly. (I actually also have that problem with some multiplying also???) It's very weird. And it only seems to be this particular form.
I can e-mail the form if that will help. I'd appreciated any help you can give me.
Thanks,
Valerie

Sure. The form looks like this: (Field Names are in quotes.)
1. Total Amount of Third Party Recovery      "total third"
2. Accrued Compensation Lien                   "accrued"   (I clicked in calculations and just clicked "value is the sum of the following: and then clicked the field
     a. "indemnity benefits"                                             names of a and b.)
     b. "expenses of medical"
3. Expenses of Recovery                             "recovery expenses"
4. Balance of Recovery                              "balance" (Its supposed to be #1minus #2) I used this script:
                                                                 this.getField("balance").value = thisgetField("totalthird").value - this.getField("accrued").value;
HiddenLockedField "percent" (The content is set to 100.)
5. Lien Expenses Reimbursement Rate          "5"   (#2 divided by #1 * 100)   I used this script:
                                                                   event.value = ""
                                                                   var accrued = getField("accrued").value;
                                                                   var totalthird = getField("totalthird").value;
                                                                   var percent = getField("percent").value;
                                                                   if(totalthird!null && total third!=0)
                                                                   {event.value = accrued / totalthird * percent;}
6. Expenses Attributable to Lien                    "attribute"    (Supposed to be #3 times #5.) I went to calculations, anc clicked on, "value is the product
                                                                     of the following" and checked "recovery expenses" and "5".
7. Net Lien                                                   "netlien"   (Supposed to be #2-#6) I used this script:
                                                                   this.getField("netlien").value = this.getField("accrued").value - this.getField("attribute").value;
8. Reimbursement Rate of Future Lia.             "rate" (Supposed to be #3 divided by #1 * 100.) I used this script:
                                                                     event.value = "";
                                                                     var recoveryexpenses = getField("recoveryexpenses").value;
                                                                     var totalthird = getField("totalthird").value;
                                                                     var percent = getField("percent").value;
                                                                     if (totalthird!=null && totalthird!=0)
                                                                     {event.value = (recoveryexpenses / totalthird) * perent;}

Allen Bradley KF-2 half duplex question

Has anyone used an Allen Bradley KF-2 DH+ communication interface with Lookout? The KF-2 connects to the SLC5/04 DH+ port and converts the DH+ to DF-1. My proccess can see the SLC5/04 in half duplex mode when I connect direct to the DF-1 port. When I try to connect through the KF-2 (set up for DF-1 half duplex), I get the Error "STS error 10: Illegal command or format" message. I know the KF-2 is set up OK, I can talk to the SLC5/04 with RS Logix in half duplex.

Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help..

10 Mb's half duplex on 1840

Router is a Cisco 1840 Series. Our ISP controls the router, The router is set to 10 Mb's half duplex. Is this a common thing for the routers to come from the ISP's configured like this? If so, is there some reason why they do this? The half duplex setting really puzzles me. Why wouldn't it be set at full duplex?
I'm wondering if the reasoning is, well it collapses down to a T1 which is running at 1.5 Mb's, so 10 Mb's is fast enough, why run at 100 Mb's.

Router is a Cisco 1840 Series.
Our ISP controls the router, The router is set to 10 Mb's half
duplex. Is this a common thing for the routers to come from the ISP's
configured like this? If so, is there some reason why they do this?
The half duplex setting really puzzles me. Why wouldn't it be set at
full duplex?I'm wondering if the reasoning is, well it collapses
down to a T1 which is running at 1.5 Mb's, so 10 Mb's is fast enough,
why run at 100 Mb's.
Hi,
Because half duplex will work in just about all situations. If it's set to full duplex and the other device is a hub or a device that doesn't support full duplex then you'd have no connectivity.
So can set full duplex with 100 Mbps at both the end side in coordination with your ISP.
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

NIC only works at 10 Mbps/Half Duplex

Similar Messages

Maybe you are looking for