Nice and Easy question (not for me though)

Hi I have the MSI K8N Neo 2 Platinum motherboard and 2 x 512 Corsair 3200 XL memory (2,2,5,2).
Can someone tell me straight out whether I need the 2 dimms in slots 1 and 2 (green and purple) or 1 and 3 (green and green) to run dual channel? I've gone through the manual and for the life of me can't dicypher what they are saying. I think its 1 and 2 but i'm not sure.
Thanks
Chris

Congratulations! You passed the first test! Unlike all us you were smart enough to ask first!
And good luck with your build. Let us know how it went.

Similar Messages

  • Transfer Iphone contacts to Z10. Nice and easy.

    This can be done through Gmail sync of course but for those of you who are not so tech savy or if you are just lazy we went to Koodo in the Eaton Center in Toronto and they have some type of gadget that is a piece of hardware.  My Iphone plugged in one side, the Z10 in the other side and she transferred all 6000+ contacts.  Simple and easy.  
    I am pretty sure you will need to turn on Development Mode for it to work properly and set a password.  That is what we did and it transferred nice and easy.

    You can't transfer your contacts from the iPhone to the SIM.

  • I have what is hopefully a quick and easy question. I kno...

    I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

    You need to access your router to check if the DHCP is on.  To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter.  That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin.  If you changed your routers password as you should for security reasons then use that password.  That will bring you to your routers user interface and on the main set up page should be your DHCP.
    Richard Aichner (Ikester)

  • Home sharing is working fine for musics and videos but not for apps. What is wrong?

    Home sharing is working fine for musics and videos but not for apps. What is wrong?

    i had the same issue as everyone here after upgrading to itunes 10.x.  vista could see xp home share.  ipod touch could see xp home share.
    neither could see vista home share.
    after several hours of authorizing de-authorizing, rebooting router etc, i knew it had to be a firewall thingy with vista as xp was working fine
    i went to this article http://support.apple.com/kb/ht2553 and followed the instructions.  itunes was already in my vista exception list.  on a hunch i deleted the itunes exception and followed the steps to add it again and boom it worked!! i could now see my vista machine from my ipod touch immediately.
    something must have screwed up the firewall exception on the upgrade to itunes 10.x
    it worked for me, i hope this helps others

  • Flash Security Settings and Random Questions not Displaying

    Hey folks,
    I created a Captivate 4 project with 3 slides and a question pool of about 70 questions in which I am randomly pulling in. I am using IE7 and Flash 10. Publishing in Flash 10. If I publish or view in Preview in a web browser the project launches, plays the first 3 slides, and then goes blank when the first question should appear. Note: previewing the project AND publishing the project as an .exe does launch and display all the questions correctly. It ends up being a flash security issue. I went to the adobe site and via the Adobe Flash Player Security Manager" I entered in the main .SWF captivate-generated file as a trusted file and then re-ran the published captivate project and it ran correctly. Question is ... what do I need to do to set up flash or my project so I don't have to do this for every new project that I deploy? I don't want to have the users have to go in and add whatever I deploy as a trusted file. It's also a little confusing as to why the first three slides played and it stopped at the questions ... seems like if it's not a trusted file, that it wouldn't run at all.
    Thanks for any help!
    Chris

    Hello again
    I think I'd be investigating a temporary web server to host on until things are ready. Here's where it will help.
    By providing files to the end users, if you are copying files over you end up having to explain how to save the files. You then have to walk them through setting the Flash Security so they can properly view. It all just becomes a pain in the kazoo.
    If you can find some server space, you simply upload the content and provide a link for the users to view the content.
    Other than that, if you are insistent that copying is the way to fly, I might suggest you establish a known location where you want everyone to copy their files. Perhaps C:\TestFolder. Then provide some instruction on how to configure the folder with the relaxed Flash Security. From there forward, anything they copy to the folder should need no security adjustment.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Ok. quick and easy question about my Zen Vision

    i'm thinking that my zen can no longer have anything added to it, although there is about 5 gbs worth of space left. it sucks has sucked for a while, but i'm trying to get over it.
    my brother noticed that in the bottom of it, the part where it connects so you can make transfers and stuff, is bent. i tried unbending it but that didn't work.
    and when i connect it to my comp, it says "overload" and my comp freezes for a bit.
    so that's a sign to get another mp3 player right? it's a shame that this happened. he thinks i was too rough with it.
    i admit that i have spent some time pushing it in when it wasn't properly fitting. but i didn't "see" it then. now looking back, i kinda laugh.
    btw, there are no shops around here to repair the bend to the best of my knowledge..actually, maybe Weiss Hardware...just maybe.

    Yes. LOL You word it so much nicer!
    lol...
    if customer support actually does help, for a nice price, you will be -my new saviour-!
    (My music is literally my life.)
    OK. I checked there. They have an option of support (while the warranty is still good) and another option (that's non-technical).
    I got my first Zen Vision (30 GB) March 2007. Then a replacement (this one) in May 2007. Is it still covered? I have my doubts. :P?

  • Does Adobe Story Free have a Type and template for stageplay format and if so where do I click for it. In the Type button I could only find screenplay, TV script, Two column script, AV script and other, but not for stageplay?

    Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

    Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

  • Quick and easy question for selection structures

    i'm new to java since I started an online course at school, and I was wondering if there was an 'and' conjuctive? i want to have a selection condition where two criteria must be met as opposed to using || where either one triggers a statement.
    the assigment is about using client programs. i want a dog to interect a certain way when it is aggressive AND hungry
    ex:
    if (dog1.getAgression () > 5 'AND' dog1.getHunger () > 5)
    // dog is hungry and territorial
    System.out.pritnln (dog1.getName + ": ");
    dog1.barkAngry
    }

    .... Points me += -1.Points to you -= 1you.points--What's your point?one more than hisGood point!

  • Authorisation of an old account on a new mac, Password not working, no longer have access to that email address, and security question not working. But I do have my mac authorised! ...is there anyway to copy or get authorisation info off it???

    Please help me!!!!
    I have got a new Mac, I am trying to share my itues on it as well as my old mac, I have had two itunes accounts in my life, one is current now (this account) one I have not had access to the email for years. Since I have bought music off both accounts, I wish to play it all on  both my macs. My Old mac has both accounts Authorised fine and all is good.
    My new Mac, I have thios account running fine, but keep getting prompted for the password for my old account, I have no idea what my old password is, I have not had access to that email address for 5 years, and for some strange reason the security question isn't working eaither.
    Since I do still have one Mac where it is Authorised, Is there any file I can copy accross or anyway to get the password out of the OSX 10.6.8 for my old account.
    Secondly, is there anyway to roll both accounts into just my current one.
    Many Thanks in advance for your help.
    Steve

    I too am having this same problem but I have not seen ANY solutions for it. Looks like Apple is ignoring it!!!!!!!!?

  • Windows 7 or 8  and Pro or not for Bootcamp

    I need to partition with Bootcamp and need to put windows on to run my Quicken 2013.   Should I get windows 7 or 8 and Pro version or not?
    Thanks

    Hi,
    Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions.
    Karen Hu
    TechNet Community Support

  • Easy question - Methods for employees to record absences

    Dear all,
        Im currently studying to certificate SAP HR. I have been reading in forums that one question is "methods for employees to record absences", as far as I know employees can record time dates in:
    - Front-end time recording systems
    - CATs
    - Self Service
    If Im not wrong, those methods let the employee record ACTUAL times rather than absences.
    Could you please correct me?
    Thanks a lot in advance!!

    Hello,
    There are two types of recording time :
    1) positive - where we record attendance ( as u both know)
    2) negative - where we record absences ( infotype 2001 ). Again this s we can maintain only once the absence quota is provided for the employee for which we use IT2006.
    Hope this answers ur query.
    Thanks and Regards,
    Tarun Mishra

  • Need av fast and easy video converter for zen

    Im starting to get really sick and tired of creatives video converter. Anyone who know a better and espacially faster video converter? I have a Creative ZEN 32gb.

    The problem with using other video converters is that you have to mess with the settings to try to find a set that work for the Zen. That means you will need to know a bit about how the Zen works.
    Some of the more common converters are Super (free on the Net), iri'verter and BADAK (both of which have Zen-specific settings), AutoGK, and Handbrake (I think). Others will come up with other programs, I'm sure. Not sure whether you'll gain a huge time savings improvement though.

  • RAID and SSD Caching Notes for the W530

    Here are some interesting compatibility and limitations issues I've encountered with the W530 on Windows 7 and 8 and Linux. To the point, a trio of SSD units may prove superior to two physical disks plus an mSATA SSD for several reasons outlined here.
    Original goals: quick restore of a previous OS state, data resillience on the road, and use of Intel's SSD caching feature in RST (which is fully compatible with the Lenovo W-series).
    Since there are several issues involved, you may want to consider adding the RAID option only after understanding these tradeoffs, which presumably still exist on latest products.
    APS (active protection) does not work when RAID is in use. Show stopper! I really don't want a head crash even with a RAID 1 mirror. APS is an outstanding feature of IBM/Lenovo products and may give better overall data stability than running with a mirror in which case both heads might crash from a drop or jar, without APS. (Disks these days sometimes have their own APS built-in so that's worth considering as well.)
    Intel's Rapid Storage caching solution requires RAID to implement on an mSATA cache. See #1.
    Reverting to a previous OS image by splitting and reverting to a mirror is not fast. It's easier to break the pair and swap the disks but far easier solutions are available.
    Documentation is sparse for the Intel RST product and Lenovo could help fill in the gaps.
    Without Rescue and Recovery, which I've used in the past to revert to earlier OS builds, other backup/restore options are still required. It is VERY HELPFUL to have a product purchased with a Windows 8 license in the EFI firmware, so that rebuilds aren't a problem. If you experience rebuild issues, quickly contact Lenovo support for workarounds and solutions. I recommend testing a rebuild several times before putting your system into production.
    On a related note, the APS feature is currently unsupported on Linux because of lack of documentation for the output stream of the positioning sensor in recent Lenovo products.
    Workarounds and Problems:
    ExpressCache, which Lenovo provides, is simple to use as an alernative to Intel's RST-based caching.
    Lenovo warns that ExpressCache is incompatible with TrueCrypt and BitLocker encryption.
    FDE (full disk encryption) drives and FDE SSDs are presumably available as a workaround to #2.
    I'm glad I have the RAID option under the hood, but I'm currently not using it. I would if I were on pure SSD storage, which does not require or benefit from APS. ExpressCache does seem to help boot up speed and overall performance, and doesn't appear to add any significant overhead.
    References:
    http://www.intel.com/content/www/us/en/architecture-and-technology/rapid-storage-technology.html
    http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT079225
    https://www.condusiv.com/partners/oem/technologies/expresscache/
    What's on your Thinkpad? T42 2379-R9U, T61 6460-DWU, W530 2436

    I'd like to suggest an alternative caching product (not affiliated with them, but have used for a long while) by the name of eBoostr.
    What I like about it:
    - Mostly OS agnostic (runs on anything after 2000, including 2000 (!))
    - Chipset agnostic (runs on any chipset)
    - Device agnostic (accepts caching on RAM, SD, CF, USB, Intel's old Turbo Memory, anything that shows up as a drive)
    - GUI interface for excluding files you don't want cached (ignore downloads, music, etc.)
    In short, there's virtually no restrictions on how, where, and what to use it with.
    I think it works fine with TrueCrypt and BitLocker, but I'm not 100% sure.
    What eBoostr doesn't do is sector-level caching, or write-caching. I use CleverCache to bump Windows' file cache size to improve write caching.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Quick and easy question

    Hello gang! When I use the brush tool to fill in some pixels a few other pixels nearby or pixels very far away will also get colorized. Why is this happening? It is super annoying as I need to recolor those pixels which I did not want to colorize.
    Secondly (and totally unrelated to the first question), when I use the fill tool to replace one body of pixels that are one color into another, it will sometimes fill in what I requested and also an extra layer, making the shape fatter. Not sure I am explaining this very well.
    Any help with the above questions would be greatly appreciated!
    -Pebble, the Photoshop Noob.

    Hi Pebble!
    Some examples would help a lot in analyzing your problems.
    For the first one, it would be good to know what brush size, softness, etc you use and whether you use precise cursor setting.
    Also, what do you mean by "very far away"? 10 pixels? 1000 pixels? Again: brush size? Softness? Airbrush on?

  • Quick and easy question about creating folder

    Total Mac newbie with basic question.
    I want to put all my user manuals right on my desktop. All in a folder called user manuals. How would I do this? Smart folder? Just drag 'n drop? how can I quickly find them all?
    Thanks in advance!

    Hi MarieBoyer
    You can easily create a Folder on the desktop, by mouse click + contol to open the contextual menu, where you can choose New Folder, then give it a name.
    Or, more easily still just drag one of the existing folders onto the desktop and use it.
    As for finding all manual documents, they are just documents in general, and may not even have the word manual in their name, so searching by that criteria will in that case miss them. Otherwise you may have to search by each of their names, which would be rather tedious.
    So I suggest, of the manuals that you know of or come across, drag them into your new Folder on the desktop as you find them.
    regards roam

Maybe you are looking for