NiDAQmx and 6220 board - Retriggering to start sampling analogue signals
I have a M series 6220 board with labview 7.
I want to measure analogue signals using a digital trigger - much like the examples given in the library shipped with ver.7. However I want to "retrigger" periodically so that I can sample the my analogue signal each time my external circuit sends a trigger pulse out. This retriggering facility continuing until I press a stop button.
At the moment all I can do is get one triggered set of samples and then the VI stops.
Any code advice or examples would be appreciated.
rgds
Charles (labview beginner)
Ive saved it to LV7.0 and attached a gif image in case you have any problems with the VI.
Attachments:
Digital Start and Stop Trigger Folder(7.0).zip 71 KB
Similar Messages
-
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
After waking up from Hibernation: Wireless mouse and k'board dont work!!
Hi All
My second issue with my iMac, otherwise been a good experience. This is the annoying one. Sometime, or i should say most of the time, when the iMac wakes up from Windows XP hibernation, the mouse and the k'board (both bluetooth wireless) decide not wake up!! sometimes they do (and i suspect it is the time i quickly double click the left button on the mouse before the windows screen comes up) and sometimes they wake up after 5 minutes!! most of the time i dont have the patience and I just reboot which is very annoying! anoyone knows why?
I saw a set up in the bluetooth devices where I can tick/untick a selection asking me if i want to to turn off the blutooth to save power (this is under control panel/system/hardware/bluetooth/properties) do i need to untic this?
Many thanksSeems like im truly the only one with the problem but i did find a workaround. When coming out of hibernation/standby (ie after u press the power button) u start double clicking the left mouse button like a possesed man!! just keep double clicking till you hear the (ding ding, ding ding), click a couple more times and that should wake up the mouse and k'board.
If u notice, when windows starts (from normal start up), mouse doesnt wake up till u double click the left button. Same issue here, seems blue tooth has a short window when coming out of hib/s.by and if u miss it then all freezes.
Well hope this helps some other people who got this issue. -
hi i found a spaces and dash board feature... when starting spaces or dash board hold down the shift key to make it apear in slow motion
Hi,
Plese try below method:
under (HKLM\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Data Warehouse\):
• Increase the value of Bulk Insert Command Timeout Seconds to 80.
• Create a new DWORD value, name it “Search Command Timeout Seconds” and set its value to 300.
If these are custom Dashboards. If yes, are the built-in dashboards have the same issue. Does them show data as expected?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?
Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first. -
Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).
Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g -
I am upgrading to Calendar Server 4.0 on NT with more than 9 nodes
(or I already have) and my server won't start.
<P>
The steps are the same whether you have already upgraded or are about to.
<P>
Calendar Server 4.0 on the Windows NT platform can only support up to nine
nodes on one server, while 3.51 supported up to 14. If you have a Calendar
Server 3.51 with more than 9 nodes that you want to upgrade to Calendar Server
4.0, Netscape recommends that you migrate the extra nodes to another Calendar
Server 3.51 on another Windows NT system. To accomplish this:
<OL>
<LI>Install Calendar Server on another Windows NT machine and configure it to
use the same directory server as your current Calendar Server.
<LI>Stop and backup your current Calendar Server.
<LI>Individually zip up the node directories you want to move to the new
server. (drive:\unsers\unison\db\Nx
where "x" is the number of the node you want to use.)
<LI>Stop the new Calendar Server.
<LI>Unzip the files into the new Calendar Server in the same place as they
were on the old server.
<LI>Edit the unison.ini
file on the new server to add the nodes you have just migrated.
<LI>Edit the unison.ini
file on the old server to remove the nodes you have moved to the new server.
<LI>Edit the nodes.ini
file on the old server to remove the nodes you just moved and then add them
with the new hostname. Keep in mind that you will only be able to modify the
node network from the old host.
<LI>Run unidbfix -export
on both servers for all nodes.
<LI>Edit the remotenodes.ini
file on both servers to reflect your node topology.
<LI>Run unidbfix -import
to import the changes into the node databases.
<LI>Run unidbfix -c,
then -f,
then -c
again on both servers for all the nodes.
<LI>If you don't get any errors, run uninode -test all
to test if your nodes connections are set properly. If they are not, <B>do not</B>
start either of the servers; instead, fix the errors and try again.
<LI>Start both servers.
<LI>Log in and check to see if you can see people on remote nodes.
<LI>Notify the users on the moved nodes of their new calendar host.
<LI>If you did this in preparation of an upgrade, you can now run the upgrade to
4.0 since both servers contain fewer than 9 nodes.
</OL>Use Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve -
fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead
It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] -
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ -
Hard drive crashed and had to replace drive and logic board on my MacBook pro. After Install tried to sync with my iPhone and a dialog box pops up stating "this iPhone synced with another iTunes library, erase and sync?". I checked the manually manage music and videos box because I don't want all my wife's pics and music on my iPhone. How do I Sync without erasing what I have on my iPhone???
columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
Dented my Macbook Pro and now it won't start up. Please Help!
Hello. I have searched and searched and cannot find a solution.
Last night I was putting the finishing touches on my dissertation and accidentally dropped a tape dispenser on my 1-year-old MacBook Pro - it hit just to the left of the trackpad and left a nice little dent! After the "incident", I was attempting to pull up Word and the machine completely froze. I turned Mr. Mac off by holding down the power button and when I tried to restart, I never got past the Apple logo with the little spinning circle. After trying many times to restart, I made it to my desktop only twice, and after the dock appeared (with no menu bar above or desktop icons), the machine froze again. Each time, I heard the hard drive working until the big freeze.
I was able to boot off of the Leopard install disc and ran "repair disk" on my hard drive - no errors were found. Tried restarting again and got nothing. I have since tried restarting with various key combinations and the machine only responded to "C" and "Option".
This morning, I searched again and decided to try the "optioncommand+pr" to reset the PRAM as suggested to another damsel in distress with a similar issue. Now, when I try to restart, I get the gray screen followed by the chime, and then nothing - no hard drive working, no Apple logo, no spinning circle, nothing. My install CD will not spin and I none of the start-up key combinations work. It just sits there staring at me with that gray screen - laughing because my dissertation is in there somewhere and I can't get it out! Yes, I have backed my maching up on a 500G external hard drive, so I haven't lost much - but I can't access my hard drive without Mr. Mac! And I am a lonely Mac owner here - no others to borrow!
I am going to an Apple Store on Saturday, but I thought I would give you guys a chance to save my life first. Any suggestions for this girl and her Mac would be great! I am defending my dissertation next week and I'm about one small crisis from a major meltdown!!!!!!
Thanks!Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti.... -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
i have an ipod nano 6th generation .version 1.2 yesterday i restored it on i tunes using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok after starting by connecting to power and then disconnecting the cord.
what would be the reason and what to do?>Call Apple Care as you are still under warranty.
Maybe you are looking for
-
I have tried the following Add on - Tab Utilities and Tab Mix Plus. Basically on start up of Mozilla, I have five tabs that load. After surfing/working a bit online, I would like to reload the five original tabs back to the original home page/load se
-
How easy is it to set up a projector on a 11" Macbook Air. Will it just work or is there a setting on the MacBook that I need to be aware of?
-
HTTPS hostname wrong: should be myhostname
WHen I connect from my SOAP client to a SOAP server via HTTP, everything works fine. But when I connect via HTTPS, I get an exception "HTTPS hostname wrong: should be <myhostname>" I browsed the forums for this and got the workaround Hostname
-
Less frequent backups possible with Time Machine?
I'm new to Leopard and Time Machine. Is it possible to set Time Machine to update less frequently than every hour? I'm working in an environment with multiple Adobe apps open at any given time, and I've noticed TM activity affecting my work (response
-
IMovie 11 Exporting Movie and No File and External Drive Falling Asleep
Help! Had a frustrating day and night with iMovie, which has been happening a lot lately. We are making a highlight video for my son from his many sports events which are on a 3TB fixed external drive and a 2TB portable one. After putting the highl