NiFgen initialize giving error code -1074135030
Hi everyone,
I am trying to use niFgen Initialize.vi and when my vi runs it produces the pop up error along the lines of "Cannot find nijelu.dll" and then throws the error code -1074135030 in the niFgen Initialize vi. It reads "niFgen Initialize.vi<ERR>Failure loading driver module." I checked in max and my device reads properly, I have a PXI system using the NI-PXI6133 card. Labview is version 8.5. Any ideas?
Thanks,
KC
Hi KC,
After searching other customer issues, the best explanation would be a driver installation error. You said you were using LabVIEW 8.5, but what version of NI-FGEN are you using? You may need to uninstall and reinstall the driver by going to Add/Remove Programs in your control panel or even download the newest version of NI-FGEN (2.5) from this link. There were other errors associated with loading nijelu.dll due to the NI-TClk driver which installs with NI-FGEN. This again should be fixed by upgrading to a new driver. Please let me know if this information is helpful!
Regards,
Vanessa L.
Applications Engineer
National Instruments
Similar Messages
-
Please help my iphone is frozen and showing only apple sign, after following few tips for web it reached to itunes sign but every time i am trying to restore my iphone it is giving me an error code 21 ???
If your phone is frozen showing the Apple logo, you need to try to force it into recovery mode to restore it as discussed here:http://support.apple.com/kb/ht1808. If you're getting error 21, try disabling or troubleshooting your security software (anti-virus, etc.). This is Apple's discussion on error 21 (copied from http://support.apple.com/kb/TS3694#error21):
Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service. -
Add-OdbcDsn giving error code 11
This "should" be simple, yet, here I am. So, I'm just trying to add a 32-bit System DSN, using Add-OdbcDsn as follows:
Add-OdbcDsn'mydb'-DriverName'Pervasive
ODBC Engine Interface'-DsnTypeSystem-Platform32-bit
One would think, nice, and done...but not so. Getting:
Add-OdbcDsn : Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed (Installer error code: 11).
The driver name is valid. If I do a Get-OdbcDsn - DriverName of the same (copied and pasted to be sure), I get other DSNs that already exist. I am running Powershell ISE as Administrator when I do this. I've searched for this error, and found things such
as already mentioned (invalid driver file or not running as admin), but I can't find anything else.
What am I missing now? :)
Thanks in advance!
mpleafI was able to figure this out. There were parameters that the driver was requiring, that I was missing in my dsn. I was looking at vb code that was created for an older version. I had to monkey with it long enough to figure out the property values. I created
one from the UI, that told me what the properties it "wanted" were, then I was able to supply those in my add-odbcdsn command.
All good, and yet more .bat and vb stuff replaced!
mpleaf -
Why is new security update giving error code during download?
Hi All,
I am on 10.8.5 and every time I try to download newest update I am receiving "an error has occurred" message. anyone else have this issue? any fixes?What are you trying to download? Are you getting an error code?
Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support -
Can anybody point me in the right direction to resolve error code 7?
Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads
-
Board giving error codes for RAM
I have a Z87-GD65 GAMING board. I am having an issue with running the RAM in DUAL channel. It will running OK with each stick individually installed, but not together. Error codes I'm getting are a 10, followed by 19, and then 55. With just one stick, code is A0. My RAM is Corsair Vengeance Pro Series Red 8GB (2x4GB) DDR3 1600 MHZ (PC3 12800) Desktop Memory CMY8GX3M2A1600C9R.
This is on the very first boot after everything was installed. no BIOS changes were made.
Any help would be appreciated.Quote
I didn't have a chance to look at socket. But, I did notice that the 1st two dimm slots don't work, but 3 and 4 do.
Classic bent CPU socket pin(s) scenario.
Quote
I hear that the LGA 1150 socket pins aren't really easy to bend. I placed the CPU in and clammed down. There wasn't really anything I could have done to mess it up. I'm pretty positive of that.
Unfortunately, not true at all. They are very fragile. A CPU cooler mounted uneven or that has incorrect torque will also cause this behavior. -
Time Machine giving Error Code -8004
My machine has been doing weird things for the past few days. (Locking up for no visible reason, losing the bookmarks created, and freezing just to mention a few) I tried to restore using my Time Machine but get Error Code -8004.
Do I have a virus? If so, where in the heck did it come from. I don't go to any bad websites. Machine has been working weird since I started playing Spider Solataire, on the AARP website.kdplatts wrote:
My machine has been doing weird things for the past few days. (Locking up for no visible reason, losing the bookmarks created, and freezing just to mention a few) I tried to restore using my Time Machine but get Error Code -8004.
Hi, and welcome to the forums.
How did you do the restore? Did you do a full system restore, starting from your Install disc? If so see #E8 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
If you didn't do a full system restore, what, exactly, did you do?
Do I have a virus? If so, where in the heck did it come from. I don't go to any bad websites. Machine has been working weird since I started playing Spider Solataire, on the AARP website.
There are no viruses that run on OSX. None. Zip. Zero.
There is some "malware," such as Trojans, for Macs, though. But (unlike viruses that can get onto your system without your knowledge), you must approve their installation (via your Admin password) and/or operation (via the "This application was downloaded from the internet ..." prompt).
Appropriately enough, some of these Trojans are included in pirated versions of Apple software, such as iWork!
(If you're running Windoze on your Mac, that's the same as running it on a PC, so it needs all the same anti-everything stuff you'd use on a PC.)
For the gory details, see Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/guides/macvirus]. -
Itunes application will not open giving error code (-50) after update
I'm having a bit of a problem with itunes. I'm running windows 7 64-bit and I hope someone could help me. When I finished making some purchases from itunes store over the weekend, I was told that there was an update for itunes. So I updated itunes and now I cannot get into itunes period. Luckly I was able to back up my purchases. When I try to open a movie that I purchased from the backup folder, I get a message that says "The iTunes application could not be opened. You do not have enough access privileges for this operation." or when I try to open itunes running as administrator I get another message "the itunes application could not be opened. An unknown error occurred (-50)." I am the only person using this computer and I have full admin rights. I had tried to download itunes again and even repaired itunes, but it just keeps crashing (B.S.o.D.). My OS is up to date. It also shows that itunes is running in task manager. So I have no idea wt heck is going on. Any help would be thankful.
I had tried to download itunes again and even repaired itunes, but it just keeps crashing (B.S.o.D.).
What numerical and text codes are you getting for the BSOD? (For example, 0X0000007E.)
If the blue screen is referencing a specific file (for example, ati3duag.dll), let us know what the file is called too. -
Brand New Desktop Giving Error Code - Critical Corruption
I just bought a HP All in One Touch 21 - 2014 computer. I have had it less than a day, and I just received an error message of "critical structure corruption" randomly, and it shut itself down. Should I take this computer back and receive a replacement? I only have 14 days through Best Buy to do so. I do not want a new computer that is going to keep having errors. Can anyone help me?
I have not installed any extra hardware or anything. It came with 8.1 on it, so I did not install that myself.
ThanksHi,
You might want to read through this thread for a remedy. Frankly, if the PC runs this way out of the box and HP doesn't have a solution then I would return the PC.
You can find the HP drivers here. Try the chipset driver first the reboot and monitor. If that doesn't solve the issue then try the MEI driver.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
I had been on several sites comparing Gas and Electricity prices. When I came out of Firefox I took the option to save the windows. Now I can't fire it up again.
Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/ -
Hi,
Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
This is what I've done so far:
1) Checked Radio switch ---> on
2) FN +F5 --> connection on
3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
Diagnose Tool gives the following output:
"Wireless Stack initialization failed, error code 117"
Logfile:
Description : Intel(R) PRO/Wireless 3945ABG Network Connection
Type : Wireless LAN Adapter
DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!
Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
Thanks much in advance for any advice you might have.
FloHi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik -
Error code 80070005 after cyan update
After cyan update, I cant sign in microsoft account in my lumia 520. There will be error code 80070005. Help me solve that problem.
Solved!
Go to Solution.even me also facing this problem plus other installed softwares are also not working and unable to update them from store. Its giving error code : 80070006 for updation.
Is there any issue in cyan update? If so, then why these guys rollout this update after so much testing.
Attachments:
screenshot.jpg 483 KB -
Getting error code 2324 when installing itunes
any suggestions ? started with the auto updater for itunes, now itunes won't reinstall and is giving error code 2324.
thanks,You may have a "cloud drive" backup utility running. I had this same problem. I stopped the Cloud Drive, and re-tried the install, and it worked!
-
Error code 13010 - i-Tunes won't launch!
Established i-Tunes user on OSX 10.6.3 - out of the blue tonight, i-Tunes won't launch giving error code 13010. Subsequently downloaded 9.1, restarted, still same error code. Any help urgently appreciated!
try if this user tip helps:
Jim VanLeeuwen wrote:
Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.
JGG -
When updating windows I get error code 80070005. My research says this is a monitor problem. I have an HP w1907 monitor. So I have tried to reload the driver program from my disk. However when I try this I get and error message saying "An error occurred while installing the display drivers".
What can I do to fix this problem? On Shut Down, my computer keeps trying to download the Windows update with no success.even me also facing this problem plus other installed softwares are also not working and unable to update them from store. Its giving error code : 80070006 for updation.
Is there any issue in cyan update? If so, then why these guys rollout this update after so much testing.
Attachments:
screenshot.jpg 483 KB
Maybe you are looking for
-
Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!
-
I'm having a problem with a clearing document that I pay for exemple 03 diferent invoices of the same vendor so I generate in the transaction F110 just one clearing document. In this document should apper a posting like this Invoice 01 Clearing doc
-
How to enable HLog for B-ACD Hunt Group
We are using B-ACD for imcoming calls, the hunt group for BACD has 5 members. I want people to be able to login/logoff from this hunt group. I have this working with the DND button, but then the phone doesn't ring when the extension is dailed directl
-
Element undefined. What am I missing here?
I can't seem to get this template to work correctly. As it is now it generates the following error message; Element PRODUCTTYPE is undefined in PRODUCTS. Here is my code; <cfquery datasource="farmky" name="getProductLists"> SELECT CatalogGroup.ID,
-
Since upgrading to new OS, my "Recent" calls touchscreen is unresponsive.
I used to be able to use the touchscreen to tap on a recent call record and return the call. Now I cannot do that, nor can I delete individual calls under all or missed. All I can do is delete the whole list. What has been done to the new OS to destr