Nigpib-linux-0.6 GPIB software driver for Linux and PXI GPIB board

My I use nigpib-linux-0.6 GPIB software driver for Linux in a Compact PCI system running linux and equipped with your PXI GPIB board ?
Thanks.
Paolo Santinelli.
[email protected]

If you alter the device ID of the device from c801 to c821 within the driver module, you should be able to use the driver with the PXI board.

Similar Messages

  • HP officejet Pro 8500A software driver for Mac OS v 10.10.2

    Dear,
    could you please provide me the HP officejet Pro 8500A (A910a) software driver for MacBook pro (OS X Yosemite v10.10.2) while is it not available on the website.
    regards,
    This question was solved.
    View Solution.

    Sure,
    thank you again 7 best regards,

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Can anyone tell me if there is a new printer software/driver for Laserjet 1300 for Windows 7 64-bit?

    I recently replaced my 2 Windows XP Media Center computers.  I have a new Desktop with Windows 7 Ultimate and a Laptop that has Windows 7 Professional.  I have an HP Laserjet 1300 printer that I would like to connect with my desktop.  This printer still works.  Keeping it would save me money.  Can anyone give me the link to the Laserjet 1300 software/driver for Windows 7 64-bit?
    Thanks in advance!

    Hi donhkraft,
    I am not sure what would cause the issue you are seeing, but you can try to download the driver from HERE instead.
    Let me know if you need any other assistance.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Software (driver) for Vodafone K3772 dongle especially OS X Mavericks?

    Hi,
    I was using Vodafone K3772 dongle, with three network driver (http://support.three.co.uk/SRVS/CGI-BIN/WEBISAPI.dll/,/?New,Kb=Mobile,Ts=Mobile,T=Device,Case=obj%282465%2 9). However its was working perfectly on my Mac OS X Mountain Lion, is not working on OS X Mavericks. When i open driver (three netwrok driver) its getting crashed. Please suggest me exact Software (driver) for Vodafone K3772 dongle esxpecially OS X Mavericks.
    Thanks in Advance,
    Suresh Balakrishnan.

    Using Mac OS X 10.9 Mavericks with 3 Mobile Broadband Huawei dongle
    So there I was in a meeting with a website client at our local coffee bar K Sue Raa in Chandler's Ford, my MacBook loaded up and trying to connect to the internet with my Three mobile broadband dongle (Huawei). To my surprise the '3 Connect' program crashed reporting that my OS is not compatible? I thought this was strange considering I had used it a few weeks before without any issue.
    What could be wrong?...... Ahhhh! I recently upgraded the OS to 1.9 Mavericks. That was the problem.
    As there was no free Wi-Fi accessible I continued the meeting using my iPhone as my website presentation tool.
    When I got back to the office I sought a solution, only to discover there is currently no driver update available from Three for Mavericks. However, this doesn't mean your 3 dongle will not work. There is an easy solution that will keep you connected until a driver update is available. It just needs you to set up the connection manually. To do this, do the following:
    Connect the dongle to your Mac then,
    Go to System Preferences > Network
    You will see something like the screenshot below...
    Simply enter the fields as highlighted above (Please note: these are the UK settings for Three). The password can be anything you like.
    Now click 'Connect'
    You should now be connected to the internet (provided you have signal of course!)
    I hope this helps!

  • How to format an external drive for mac AND pc use

    i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
    can i partion one part for ms-dos and part for macos extended?
    cheers
    -j-

    MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
    You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
    Look at this page for more information on a dual partition drive for Mac and Windows.
    http://macosxhints.com/article.php?story=20030613121738812
    iFelix

  • Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    format flash drive in Exfat for transferring files between Mac and Pc.
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • Use external drive for windows and mac

    Hello,
    I just bought a external 320Gb Western Digital Drive. I would like to use
    the drive for windows and mac.I will not like to make partation on the drive
    to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
    Thanx.

    If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • Missing *.inf driver for 2605dtn and windows 7 64 bit

    missing *.inf driver for 2605dtn and windows 7 64 bit
    I just piurchased a new HP laptop with windows 7 64 bit installed.  I do not have any windows 7 disks.
    Where do I obtain the necessary drivers for this printer?

    HI RandyJohnson,
    You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information,  go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Where would someone turn if they think they may be interested in apple/mac software development for systems and applications?

    Where would someone turn if they think they may be interested in apple/mac software development for systems and applications? I do have some experience with industrial machine control programming. Not that it directly applies, however I have been involved in some types of programming.

    You might start by reading this: http://www.guardian.co.uk/technology/gamesblog/2009/feb/10/gameculture-apple
    I would check out the refurbished section of the online Apple Store before buying a used one from Craislist. They go quickly so you have to check often. It will be more than sufficent for you to work with.
    There are more than a few such books, go to a book store near you and browse them yourself to see which one works for you.
    For items 3 and 4 wait until you are ready for a commercial app and then seek help from a lawyer and an accountant.

  • When is Apple will make a Micro USB Flash Drive for iPads and iPhones ???

    IIt's really a big help if Apple make their own Micro USB a Flash Drive for iPads and iPhones.

    Apple would not tell people there are other brands on the market. It is my opinion that if Apple users keep asking for the USB for ipads, they might consider it. As for the iphone there MIGHT be a tiny slot inside where the battery is for an SD card, which expands the space. I know Android has that feature in their cell phones, but not sure about Apple.

  • Itunes 8 "Drive for importing and burning CD/DVD are missing"

    I downloaded ITUNES 8 two weeks ago and, like many, have been receiving this message since. THE REGISTRY SETTINGS USED BY THE ITUNES DRIVER FOR IMPORTING AND BURNING CD'S AND DVD'S ARE MISSING. Can anyone offer a fix/solution? (BTW...When I downloaded ITUNES 8, it also blew away QUICKTIME).

    Take a look at this link
    http://www.gearsoftware.com/wiki/index.php?title=CD/DVDdrives_disappear_after_installingiTunes
    I was having the same problem...actually for the last year and I found this info last week and followed the info and now so far everything is good. I finally can burn a cd in itunes and all my cd,dvd and media drives are in place and working.
    Hope this helps for some one.....

  • Why i got a software update for s4 and pad2 when i have a 5c?

    Why i got a software update for s4 and pad2 when i have a 5c?
    <Edited by Host>

    Because there is only one update for all iPads and iPhones if you learn to read. And watch your language or no one will bother helping potty mouth little children like you.
    Pete

  • LabVIEW 2010 FPGA Driver for Xilinx SPARTAN 3E Starter Board

    Dear Friends,
    Is there any possibility to release a LabVIEW 2010 FPGA Driver for Xilinx SPARTAN 3E Starter Board?
    Regards,
    wedo
    Solved!
    Go to Solution.

    Hi Brad,
    So glad to get your post here!
    I’m looking forward to download the new installer.
    I wonder whether the new driver will support the 10/100 Ethernet Physical Layer Interface, since the last drivers aren’t support this feature!?
    Also, will be any new examples included with the new driver? For instance: an example for the StartaFlash Memory; I have done an example for this but I couldn’t get it work! I don’t know why! You may check my post and the example in the following link!
    http://forums.ni.com/t5/LabVIEW/Spartan-3E-StrataF​lash-Memory-wrong-reading/m-p/1030898
    By the way, is there any plane to develop a driver for the Spartan-3E (1600Kgate) kit? Both kits (500KGate and 1600KGate) have the sample on-board peripherals, the only difference is in the number of Gates (FPGA chip). I think all that is needed is to add the component ID (29597843---->3E1600) and revise the xc3s1600e.bsd and 3sXXXe.nph.
    Thanks in advance & kindest regards,
    wedo

Maybe you are looking for