Nigpib-linux PCI-GPIB driver does not work on RedHat 8.0

The PCI-GPBI driver for linux (nigpib-linux) can't be installed on Linux RedHat 8.0. The first error is a reference to "malloc.h" having to be replaced by "slab.h". Then, the module compiles, but it has to be loaded with the "force" option, by replacing all instances of "insmod" in the "INSTALL" script by "insmod -f". When loading there is an error message that the kernel is compiled with gcc 3.2, but the module with gcc 2.9, and this is known "not to work". One can load the kernel module with "insmod -f", but when running "ibconf", "insmod" is used when saving the configuration, so there is an error message again. The solution to this problem is probably to compile the source code for the driver (supplied by NI a
s a binary) with gcc 3.2. It would be so much easier if NI opensourced the entire driver.
Can NI compile a binary against gcc 3.2 on RedHat 8.0??
Thanks in advance.
Best regards, Erwin

Ok, my bad. Apparently the gcc3 compilied driver has
been available since Jan 2003. Here is a link:
ftp://ftp.ni.com/support/gpib/linux/nigpib-linux-0.8.3.tar.gz
I should think NI could use a better naming convention to
flag this a bit better. (Like nigpib-linux-gcc3-x.x.x)

Similar Messages

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

CD/DVD drive does not work after Win 8 intsallation

from a month i've updated my windows into windows 8, everything is working great but the DVD-RW .
When i put empty cd and try to open it, it gives me error while opening saying:
"windows was unable to complete the format"
So is that a software or a hardware problem?!
waiting for the help !

Does this mean that your CD/DVD drive does not work anymore and is not recognized by system?
If yes, then I would recommend checking this Toshiba document which I found on the knowledge base portal webpage:
+Why does my CD/DVD Drive not work after upgrading to Windows 8?+
http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
You will need to uninstall the Toshiba programs:
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Tecra M7 DVD: CD/DVD RAM drive does not work since installing Vista

I did a clean installation on my Vista Ready new M7. It had XP tablet to begin with and the DVD drive worked fine. Indeed I used it to install Vista (Home Premium).
Now it does not work at all. It spins but does not read. Device Manager tells me device cannot start. Tried to update driver and it told me that it has the most uptodate driver.
Downloaded all the drivers from Tosh download centre for Vista upgrade of M7 (which got bluetooth, screen rotation etc to work fine). But none of the downloads seemed to be a driver for the DVD-Ram drive. Can not find a driver anywhere else (including Panasonic site).
DVD drive is Mat****a DVD-RAM UJ-841s
Any suggestions?

Hi
On the Toshiba driver page you can find the DLA for Tecra m7.
Did you try to install the XP DVD-RAM driver from the Toshiba page on the Vista OS?
Maybe it will works
But listen the CD/DVD drive uses the common Microsoft drivers which are included into Vista or XP.
Therefore an additional driver should be not needed!
One additional proposal;
Remove the CD/DVD drive from the device manager and reboot the notebook.
After new reboot the OS should install the drive again and should renew the software.
Other hint:
- Start the registry
- Choose the registry key;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- In the right pane, right-click UpperFilters and LowerFilters then click Delete.
- and restart the notebook

Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Satellite P105 mat****a dvd drive does not work with Win 7

Greetings,
I need an upgrade on my dvd for my vintage Satellite P105.
I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
2) So, my question to the mavens of multimedia is: What should be my next move?
3) Should I go external and face the USB bottle neck or
4) go for the bus speed on the internal dvd?
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Of course, if you could give me a model number and direct me to sales it would be much appreciated.
Thank you all in advance.
Rachel_1

1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
Makes sense
2) So, my question to the mavens of multimedia is: What should be my next move?
As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
3) Should I go external and face the USB bottle neck or
External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
4) go for the bus speed on the internal dvd?
If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
e
5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Thank you for your prompt reply. Could you comment on my questions add to your message?
Rachel

Satellite P105 - DVD/CD ROM drive does not work

The DVD/CD ROM drive on my P105 does not work at all. I've tried the registry fix for the upper/lower limit thing - didn't fix the problem. The drive does have power, does spin a disk, but it is not recognized by the system. It doesn't show up in the device manager at all. I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!). Thanks for any and all suggestions on hot to fix this problem.

Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
http://laptopforums.toshiba.com/tshb/board/message?board.id=brd_gen&message.id=3357&query.id=176774#...
Cheers!
D.Lex

32-bit Oracle ODBC Driver does not work under Windows 64-bit

We have both Oracle Server 64-bit (10.2.0.3) and Oracle Client 32-bit (10.2.0.1) installed on the same Windows 2003 64-bit server.
We can create and test 64-bit Oracle ODBC System DSN using 64-bit ODBC Administrator.
We can also create a 32-bit Oracle ODBC System DSN using 32-bit ODBC Administrator.
However, the "test connection" does not work:
Unable to connect
SQLState=IM003
Specified driver could not be loaded due to system error 998 (Oracle in OraClient10g_home32)
We need the 32-bit driver due to 32-bit applications acessing the local 64-bit Oracle server.
How should we accomplish this?
Thanks.

I applied 10.2.0.3 path to Oracle Client 32-bit and now the error is different.
This error message appears 3 times before configuring, creating or testing a System DNS:
"An unsupported operation was attempted."
I just click OK 3 times and then can configure, create or test the DSN.
However the 32-bit application still cannot access Oracle...
Yours.

Fluke 5500A Driver does not work

I am connecting my computer to the Fluke 5500A Calibrator. Using Labview 7.1 and VISA 3.2. The driver from the web does not work. Do I need to download the old version of the VISA? Has anybody facing the same problem?
Thanks
Lian

In order to help you, you should really give some details on what exactly doesn't work. I did look at the driver though, and have one suggestion. It uses an old VISA Open function in FL5XMCAL Initialize. You should replace it with the VISA Open on your palette. When you do that, the wire to the string called Instr.Descriptor is broken. Delete this string, make the VISA Session control visible, and wire this to the connector pane where the string control was wired. If you want, you can also replace the string controls in the 2 VIs that call the initialize function with VISA Resource Names as well. These are the 2 Getting Started VIs. I've never used this instrument but I've never had much luck getting a driver with the "old" VISA Open function to work. Having a VISA Resource Name on the front panel makes things a lot easier anyway since you don't have to type in an address. Just click the arrow and pick from the resources available.

CD/DVD drive does not work

After 6 days receiving my mac book pro I insert a CD to install my internet services, the the drive did not work and is not possible to take out the CD the icon does not appear in the desktop nor work the expulsion keyboard after read the topics in help the CD reamins in the drive.
I appreciate any help on the above isse
I believe this is unacceptable for an expensive device for a newly user/client.
Regards

Try starting up Disc Utility from your utilities Folder, Mac fail, and see if you can eject the disk from there.
If not, as your computer is brand new, I'd suggest you simply get in contact with the place you purchased it from to arrange a replacement.
Cheers
Rod

I want to replace the SSD in an HP mini 1010nr. i have 30gb Hitatchi 1.8" drive. does not work.

the drive connects using the cable from the SSD, however; the BIOS does not detect the drive and the drive does not power. Did i waste my time and money buying a hard drive to repalce the SSD?

Hi,
Have you watched this ?
http://www.youtube.com/watch?v=HWadcb6yDv8
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PCI USB Card Does NOT Work With Mass Storage Devices

I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

Nigpib-linux PCI-GPIB driver does not work on RedHat 8.0

Similar Messages

Maybe you are looking for