Nik Filters not showing up in 'Edit in' with LR 4.2

I'm running LR 4.2 and all the Nik filters (complete set) are updated yet I only see Color Efex 3.0 Complete and Edit in PS 6.0.  All the filters are showing and operating in PS 6.0.  I do see HDR Efex Pro 2.0 under export as expected.  I'm guessing that I have something turned off in LR so if anyone has some insight to get the appropriate filters to show up under the 'Edit in' heading I would appreciate pointing me in the right direction.

have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
The essbase.bak_startup file is always updated everytime the Essbase server is started up.
Be sure to take a backup of the file before starting up the server again.
The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
let me know if this works.
Regards,
Anindyo

Similar Messages

  • SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

    Hi
    I keep seeing this issue albeit intermittently.  I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc)  . They all appear perfectly most of the time except the lookup column. Sometimes is just
    decides to display the title field of the current library and not the lookup list title .  It is weird as it has been working perfectly for ages given the library is populated with valid documents.
    There are some fixes listed here. Has anyone got any experience of this?
    https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
    Freelance consultant

    Hi,
    According to your post, my understanding is that the lookup  column not display well while editing in word.
    Did you customize the Document Information Panel?
    I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
    https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
    Or you can also use the methods in the post you have pasted to check whether it works.
    As the limitation of the environment, we could not reproduce the issue in our environment.
    I  would suggest you open a case to Microsoft Customer Service via Phone.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • When filtering by keyword and using "Edit In" with Photoshop, edited file does not show up in list

    When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
    Message title was edited by: Brett N

    There are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
    (When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
    In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
    There is a useful clue to which mode is being used:
    the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
    the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
    So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR.

  • Not all NIK software plugins showing in LR Edit in Pull Down

    I'm running MAC, 10.6.3 and NIK software all 5 plugins.
    In LR 2 when I go to the EDIT IN pull down menu all of my NIK software were available.
    NOW, Only one is available Viveza 2. Even if I go to LR pref it only allows me to designate one external editing program which is of course Viveza 2.
    When I open Viveza 2 it works fine.
    I'd like to have all 5 of my Nik plugins available in the LR Edit in pull down menu.
    Any ideas?

    It isn't obvious, but you can add as many external editors as you want. In Preferences/External Editing, hit the Choose button, select an application, then from the dropdown select  "Save current settings as new preset". Repeat as needed.
    Hal

  • Video / Audio Filters not showing up in "Viewer" tab?

    Hi, I recently re-installed Final Cut Express v4.0.1 after a hard drive crash.  Now the video and audio filters do not show up on the Viewer Screen.  They show up on the "Effects" menu tab (though video transitions do not).  I've attempted uninstall / reinstall and deleting preferences but still no luck.  Any suggestions?  Thanks!

    You may not have deleted the dodgy app fully as there are numerous hidden folders.
    Use this free app:-
    http://www.digitalrebellion.com/fcsremover/
    Make sure only FCE is selected and click the Remove Selected button at the bottom.

  • Aperture 3 Not Showing Pictures in Edit But Otherwise OK

    Hi,
    Aperture 3 is not showing pictures in the edit screen. Previews are ok. Moreover, when I zoom in in the edit window, pictures are showing correctly. Also they are shown a second after an adjustment is applied (and, actually, if you hold the slider you can see the picture the whole time). It exports fine.
    I've tried:
    repairing permissions;
    repairing database;
    rebuilding database;
    creating a new library and importing;
    manually repairing the library as per https://discussions.apple.com/message/11700059#11700059
    re-installing Aperture;
    reparing permissions system-wide.
    Nothing helps. I don't have the backup, obviously. System is Macbook Air 1.7 GHz i5, 4Gb.
    Could anyone, please, help?
    Thanks in advance,
    G.

    OK first off the procedure you referenced re: manually trying to rebuild a library is a last ditch, library is on fire, crashes the world procedure. It is never to be done as a first wave troubleshooting step and it is never to be done without a complete backup of the library. Hopefully that hasn;t added anything to the problem.
    Ok that's out of the way. You should start by removing the filter you have on the browser. It's most likely not causing this but there is no need for it and it's only adding a layer of complexity we don;t need now.
    What version of Aperture? If it is 3.2.3 (the latest from yesterday) did this start happening the? If it is not the latest you should upgrade.
    Does this happen with all images in the library or only some? What type of images RAW or JPG?
    If you create a new empty library and import a few images into it does the problem still happen? What if you make a new user and run Aperture as that user on a new library?
    When did the problem start? Was it working OK before with this library?
    Finally have you rebooted since this problem started?

  • NIK filters not working well?

    My NIK filters are installed in PS CC. After using, I hit save and I get taken back to the original image in photoshop without a layer or the image altered. How do I make the changes from NIK filters apply to an image in PSCC?
    This has not been a problem in PS6 and I actually repurchased the NIK software package and re-installed - no changes.

    This really is a question for NIK support:  https://support.google.com/nikcollection/?hl=en#topic=3288093
    Good luck.

  • Produced lens profile for Canon G12 put in folder 1.0 does not show in lightroom edit pane

    Noted that adobe show lens profiles for G10, G12 G15 and G1X but only G10 shows in downloader and in lightroom edit pane profile selection
    Created my own lens profile for G12 svaed it but does not come up in edit pane choices??

    What LR version are you using, and does LR let you manually select the profile you want?
    I take your point that Canon could have offered their own Adobe-compatible profiles, but those would probably have needed to then be supplied to the end user by Canon, not by Adobe.
    I am seeing the particular Canon profiles that you mention, in LR 5.4, offered against Raw images but not against non-Raw images.
    Unless you are using an older software version, or selecting perhaps a derived edit version in e.g. TIFF instead of a Raw, I am at a loss why you are not seeing them too.
    I believe these will have been generated by Adobe. They are here on my PC:
    Please note that there is a non-Raw profile listed there for e.g. the G10 but not for e.g. the G12. So the fact that you ARE seeing a profile for the G10, lends some weight to the idea that the image currently selected may not in fact be Raw based.
    BTW, I don't think that any extra profiles that the user might make or find, and then save in here, are going to ever be seen by LR (or ACR). This is apparently the Adobe "official installed profiles only" location.
    Any profiles made or found by the user, need to be saved into a similar folder within the user's data area, in order for LR to see them and use them. And if these are Raw based, they will still not appear for a non-Raw based image.
    On my Windows computer, that location is C:\Users\[username]\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
    This has a "Downloaded" subfolder (which is, I think, the destination used by the Adobe profile downloader utility).
    RP

  • Portal page does not show up the edited portlet

    Hi ,
    We were on 3.0.9 and recently migrated to 9.0.2 ......and i am just trying to develop a simple page in which am adding an html portlet on the page ...my doubts are ..
    1. the portlet does not show up immidiately on the page ..
    2.the edited content in the html portlet does not show up on the page ???
    What am i missing here ??? can some body help
    vi

    Might be caching issue.
    Try this:
    Add : &1=2 at the end of URL in the location bar and press enter. If is appears then it is just a caching issue.
    Thanx,
    Chetan.

  • Filters not showing up values

    Hi Gurus,
       I am working on some reports in WAD.
       I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
    This Characteristic doesnot have master data. It is displaying the KEY values.
    For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
    Please update me with a solution.
    Thanks,
    Raj

    have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
    If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
    The essbase.bak_startup file is always updated everytime the Essbase server is started up.
    Be sure to take a backup of the file before starting up the server again.
    The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
    What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
    This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
    let me know if this works.
    Regards,
    Anindyo

  • Film Strip Filters not showing after opening Lr3

    For some reason when I open up Lightroom, the film strip filters don't show up.  I can choose a filter to show and that works, but it goes away again after closing and reopening Lightroom.  I'm almost positive it didn't do this on my previous mac.  Any idea if there is a setting I am missing that should be on or off to make them show up no matter what?
    This first screen shows the filter area above the filmstrip after opening Lightroom.  I even selected a filter preset that I created and nothing shows up.
    This second screen shot shows the filter area after selecting Flags and then selecting Rated to get those filters to show up:
    This causes a problem because if I am in the Develop module, I can't filter by my flags and ratings, so I have to manually turn the filters on again in the Library module.

    I think I might have just figured this out... doh!  I clicked the word "Filter:" which has the effect of showing all filters.  That filter bar now seems to be there each time I open Lightroom. 

  • Add field not showing in contacts edit screen

    Trying to add nick names to the contact list in IPhone 6, but the "add field" prompt is not showing. Tips?

    Well first of all PL10 has some addon-issues (I don't think they affect Screen Painter since that is only UI-API but I would not recommend it...)
    Regarding the problem...
    What you should try to do is go to "C:\Program Files\SAP\SAP Business One" (Perhaps "C:\Program Files\SAP Manage\SAP Business One") and delete or rename files "AddOnsInstall.sbo" and "AddOnsLocalRegistration.sbo".. These files controls installed addons on the client, and if you remove them the addon will try to reinstall the addon...
    Also try to go to %temp%\SM_OBS_DLL and delete/rename this as well... Controls versions of the SDK and there might be some left-overs from older versions
    If that not work try to go to the SARI table in the SBO-Common and delete the record regarding the Screen Painter
    If all the fails the old trick to uninstall the SDK, DI-API and client and reinstall them again sometimes solves the problems... (I know... Lots of things can go wrong in SBo and I've seen most of them)

  • 3D in CS6 extended is not showing up on my computer with a geforce gtx 750 ti on windows 7 home premium

    Like I said the 3d menu is not showing up on photoshop cs6 extended edition my specs are the following:
    CPU- Intel Pentium G3258 3.2GHz dual core
    GPU- EVGA Nvidia geforce gtx 750 ti 2GBs DDR5
    RAM- 8GBs DDR3
    OS- Windows 7 home premium
    if you need more specs than that just ask
    It's not an issue with my photoshop version because I downloaded it to my brother's computer (much weaker than mine) and it ran with 3d
    Please help.

    Update your graphics driver or use an older version that does not use CUDA 6.0 and uses 5.0 so PS can detect it properly...
    Mylenium

  • Hi. My songs that I bought on my iphone does not show on purchaced after sync with my macbook pro. Some of the songs shows it has been downloaded ,but it has an x next to it and doesnt play. Thx

    Songs bought on iphone do not show up as purchased on my macbook pro after sync. Some songs bought on iphone show as downloaded but has an x next to it and cannot play. It play on my iphone though.

    The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
    Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
    Message was edited by: Apple I0S Help Team

  • My Google Calendar will not show up on iPhone 4S with iOS 7.1.1. What do?

    I just got an iPhone 4S (bougtt used through a third party, in case it may make a difference) and I'm having issues connecting Google's calendar.
    I've followed instructions here: http://michaelhyatt.com/how-to-setup-google-calendar-on-your-iphone-4.html;
    here: http://www.craigbailey.net/google-calendars-not-showing-in-ios7/
    and of course, here: https://support.google.com/a/users/answer/139206?hl=en
    But so far, nothing has worked.
    I should note that I can see the account itself under the Mail, Contacts, Calendars tab, the Calendars option is switched on and all other Google features (e.g. Gmail, notes and contacts) are operating fine. I also have an iPad mini which I bought in June 2013 (first hand) and has been displaying Google Calendar without any issues from Day 1. I've compared the settings on both devices and could not find any difference.
    In short, I'm at a complete loss here and would greatly appreciate some help.

    Same issue when I try to select the most recently taken photo thumbnail, bottom left: freezes.Problem is fairly recent, I don't think it ever happened before the last update.

Maybe you are looking for