NIK plug-ins not working with LR4

Does anyone have any updated info on when Adobe are going to do something?

They are working here under 4.1RC http://blogs.adobe.com/lightroomjournal/2012/03/lightroom-4-1-now-available-on-adobe-labs. html

Similar Messages

Nik Software Plug-ins not working with LR3

Hello,
I have both LR 2.7 and LR3 running on my computer. When I installed LR 3, it load the Nik software plug-ins into the external editor section like LR 2.7. However, when I try to use a Nik plug-in in LR 3 I get an error message that the " File xxxxx.tif can not be opened because it does not exist or access is denied." The Nik interface opens, then I get this error message, but then it places the xxxxx.tif file in the film strip. The plug-ins work just fine with LR 2.7. I've uninstalled and re-installed the plug-ins, but the same error message pops up in LR 3. I have contacted Nik Software, but have not gotten an answer that works. Has anyone else had this problem? If so, what was your solution. I've tried everything I know of except uninstalling LR 3 and re-installing. I'm using Windows 7 64bit. I have CS4 (32 and 64bit) and CS5 (32 and 63bit) running and the plug-ins work just fine with them.
Thanks for your help in advance!
Dennis

Hi Martin,
You might try going in the pref and under external editing and try to manually set up each one. Go down to additonal external editing. Click on Choose and then go to the folder where you have your Nik software installed and choose the program file. There will be dialog box telling you to name the file, call it anything you want and the click ok. Go to the drop down bar and select Save as new preset. Close LR3 and then reopen and check to see if your program is there under the new name. If not, you probably will have un-install all the plug-ins and re-install. Hope this helps!
Dennis

QT7 gone, ProRes & MPEG2 plug ins not working with MPEG Streamclip

In the get info tabs they say 'Open With : SCIM' the rest say '<None>'
Just got my new imac running 10.6 yesterday and ran migration assistant.
My FCP license is for 5, will be upgrading soon (waiting for a 64bit release, fingers crossed) which should install fresh versions of the codecs.
Is there anything I can do in the meantime?
A bit miffled because I paid good money for my MPEG2 license.

Ta Muchly, got back roughly to where I was, QTPRO functionality preserved.
No sign of those ProRes codecs, I think they may never have been there in the first place, at work I use a Mac Pro with FCP6 / FCS2 and I may have tricked myself that they were available on FCP5 / FCS1 when they may not be.
FCP5 is unstable on 10.6 anyway (apparantly) so I'll be on FCE at home until I upgrqade anyway, and Apple Intermediate COdec is still available and working well.
Many thanks for your help with my question.

NIK plugins not working with LR4.

Installed LR4 and then NIK software plugins not working. Get the error "bad argument#1 to 'lower' (string expected, got nil).
Downloaded the latest updates from NIK and have same error.

You might try this active thread, with the same title as yours
http://forums.adobe.com/thread/971432?tstart=0

My Nike HRM is not working with my 7th gen Nano

I got the 7th Gen Nano a few weeks ago and so far I like it very much. I had a Polar HRM and discovered that my existing HRM transmitter would not
work with the Nano. I got the HRM transmitter that says it works with Nike+ and it's not working. Any suggestions?

When I plug it in iTunes recognizes my iPod, syncs it, but then the iPod library is grey.
If the iPod's Music list is greyed out, that usually means the iPod uses automatic syncing. You cannot change anything directly on the iPod, because you are not manually managing content. You let iTunes manage the content, based on the settings on the iPod's Music settings screen.
Select the iPod in iTunes. In iTunes 12, click the "device button" on the horizontal bar (its icon looks like the device). The iPod's "management" screen comes up, showing the iPod's Summary settings view. Is the box for Manually manage music checked or not checked? If it's not checked, you are using automatic syncing. In the iPod's sidebar, under Settings, click Music to show the iPod's Music settings screen and set up (or update) automatic syncing for songs.

What's With Volume Logic Plug-In Not Working With iTunes V7. and Up

Hello Folks. I recently updated to iTunes ve 7.0.2 and now my great Volume Logic Plug-in won't work. I downloaded the latest update and then read info on the Plantronics site about the problems with the plug-in with new itunes updates.
Is anyone here figured out what's going on or a workaround. That plug-in makes such a positive difference in music sound quality, the tunes almost feel "naked" without it
Steve

Prior to the 1.3.2 released (beta or the now-available final), Volume Logic did not work at all with iTunes 7. According to Plantronics, Volume Logic does not work with Airtunes and the AIrport Express (it's stated right in their FAQ).

Third-party plug-ins intermittently working with CS 5

Hi folks,
Hang in there with me, folks… I'm going to attempt to ask a coherent tech question (or several)! Gulp. So here it is:
I'm working on a Mac OS X Lion (10.7.5) with Photoshop CS 5. As part of my photo editing workflow, I used several plug-ins purchased from third-party vendors (Little Lusker, Florabella, and Google's NIK suite). Over the past several weeks, I've been experiencing increasingly perplexing and difficult issues when I attempt to use these plug-ins. The latest, most perplexing development is that when I attempt to use brush actions, the brush now doesn't work (ex. for teeth whitening).Sometimes it does… it always did before yesterday… and now it most often doesn't. I've reset all my tools, uninstalled and reinstalled Photoshop, and am still experiencing this problem. When I reinstalled Photoshop, my plug-ins automatically reinstalled… so if they're corrupted somehow (why?!), then perhaps that is why the brush isn't working.
A second, related problem: the NIK suite just released an updated plug-in. Whenever I try to use this plug-in, it crashes Photoshop. I tried to troubleshoot from the Google website, but I didn't have the coding permission necessary to write to the config file. So I guess I can't use that plug-in.
A third problem: if I leave Photoshop open on my computer and walk away for any length of time, I risk coming back to a computer that has crashed. I've spoken with Apple, and they're adamant that it's an Adobe problem after running the disk permissions on my computer.
So help me out here, guys! What the heck is going on with my version of Photoshop? Am I roped into buying into CC? I'm not a techie, so the only tool in my toolbox is to throw money I don't have at the problem. I'd really appreciate any help.
Keep me posted if there's any additional info I can provide! I'm happy to oblige.
Cheers,
Caryn
P.S. It just occurred to me that there is another error I've been getting. When I edit a file, if I leave it on my computer overnight I risk being unable to open it in the morning due to send "end of life' or file nonsense. Anyone know what that's about?

Anyone out there? Help!

Nik Collection does not work with Photoshop CC 64-bit but with 32-bit

Hi,
though the Nik-Collection-Filters are listed (and installed) in PS CC 64, they do not work properly. The first visible difference is, that the "panel" of the various filters is not displayed when I start PS, but it is in the 32 bit version.
Even if I want to apply an Nik-Filter on an image nothing changes, but it does in 32 bit mode.
Is there a solution for this problem?
Thanks!

Hello, I found a Post. I tried this and it works perfectly, you don't have to re-install CC or install CS6 all you have to do is that you install the Nik Collection in Photoshop CC (32bit) (plug ins) then you copy the "Google" File and that is the important one !!
into:
Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\Panels\ ...........
it works perfectly.
Thanks to Mr. Peter Beckett from NIKONIANS.org
http://www.nikonians.org/forums/dcboard.php?az=show_topic&forum=319&topic_id=11486&mode=fu ll
regards from AUSTRIA

IMovie plug ins not compatible with Intel Macs

I need a page turn transition for an iMovie 6 project I'm working on. I downloaded one from cfx, but apparently a lot of the plug ins are not compatible with Intel Macs. Anyone out there have any suggestions?

Any GeeThree plug-in that uses flash will no longer work, which include all the WildFX plug-ins. Apple did away with flash support in Quicktime 7.3.1 or newer! Now iMovie is basically unusable without the very cool & professional GeeThree plug-ins. If Apple keeps this up iMovie will probably go the way of the dinosaur. I've talked to Apple about this and they responded "why don't you buy Finalcut Pro". It's what Apple does best, Farm the base.....
Ken

Garage Band and other Plug-Ins not Working

My Garage band isn't working. When I click on it the icon just bounces continually and never does anything. It was working fine yesterday. I also have a couple plug-ins, KORG M1 and Wavestation, that I use with Garage band and they are doing the exact same thing. Why am I having these issues??

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

File format plug-ins not working

I cannot get any of my file format plug-ins working with 5.1. They were working fine with 5.0. I am using some of the plug-ins here but none are working since I upgraded.
http://www.telegraphics.com.au/sw/
Is there anyway to check whether Photoshop has even recgonized these plug-ins? There doesn't seem to be anyway to scroll in the about screen in photoshop to check there.

Thanks! Ok, I'm getting "NO VERSION - 32-bit plug-in not supported in 64-bit" for those plug-ins.
Is there any workaround?

Topaz Plug-ins not working in LR 4

Spent over two hours on the technical support chat line this morning trying to resolve this issue. In the end, the support specialist had to punt and escalated the case to a higher level. Not sure what that means, I haven't been notified by anyone at Adobe. I also notified Topaz Labs and they said some people are having the problem and some are not but they're looking for solutions. Adobe's opinion was that it was Topaz's issue to deal with but after reading the plethora of posts I'm not so sure. I'm running Mac OS 10.7.3 and that seems to be a common thread through a lot of what I read. I don't get the impression that Adobe is listening to their customer on this one. Otherwise their support specialists would have been all over this. Sigh....guess I'm waiting for a patch from someone...maybe.

I had the same problem with LR4 and plugins from Topaz. I have PS3 and am not interested in downloading PS5. Here is what I sent to Topaz and their response:
I followed instructions for removing old versions of Fusion Express and reinstalled. I purchased two plugins as well today,Topaz Adjust and Star Effects. When I attempt to edit photo in Lightroom 4 by selecting a photo, then choosing Photo, edit in, Fusion Express2 64bit, I receive the message Unexpected error performing command: bad argument #1 to \'lower\'(string expected, got nil). I have 6GB of RAM on a Dell N5010 laptop with an Intel i5 2.53Ghz processor, using Windows 7 64bit.
Response from Topaz help:
Hello,
It seems that the issue with Plug-ins and there compatibility is on Adobe's end, and supposedly they are going to be releasing a new version on LR4 that is compatible (a 4.1 version) asap.
Please see here for more info: http://feedback.photoshop.com/photosh...
Let me know if you have any other questions.

Plug ins not working after upgrade

After upgrading to Mtn Lion, addicitive drums plug ins are not recognized in Logic. They are working fine in garage band.

Sorry I'm unsure! Have you had any progress with it?

AU Manager Crashes, Standard 3rd party plug-ins not working

I recently had a huge crash, down to the point where I eventually replaced my system drive with a brand new one, and started fresh.
After rebuilding my entire world, plug-ins that used to work, don't anymore - and they're standards that everyone uses (Kontakt 2.1, etc). I can't even get the AU Manager to load.....Logic just sits there forever with "the beach ball of death" untill I force quit.
Nothing "new" has been introduced. I've simply replicated the system I had before down to the T.
Any thougts?
I'm on 7.1.1 in 10.4.4
G5 2x2, LAP 7.1.1, 10.4.2, 4.5 gigs

Try removing all 3rd party plugins and see if Logic works by itself.
Add the plugins back to the components folder one by one, testing to see if they behave.
Sorry to hear about your crash, I have had this happen to me and it was a week of pain.
It really made me wish all plug ins were authorized on dongles, so that something like carbon copy cloner would have saved the day.

Safari - Flash and Silverlight Plug-ins NOT working

Safari does not seem to recognize my Flash and Silverlight Plug-ins so that I can watch and stream videos. I might have messed it up, but I can not fix it. Any help is appreciated. Thanks!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

NIK plug-ins not working with LR4

Similar Messages

Maybe you are looking for