NIK plugins and elements 10

I just installed elements 10 but when I try to add my NIK plugins- silver efex 2, viveza 2 and color efex 3- it states it cannot read the files. Does anyone else have this problem? Suggestions? Thanks Ron

I had some problems with the NIK plugins. They worked fine in 9 but not 10. When I contacted NIK they told me (via e-mail) that as 10 was so new, their plug ins weren't working with it yet and would with the next update. I called them and got some help. It is a bit of a complicated process however (even assuming the plug ins were originally installed in the default locations.) They have some beta versions which they sent me to "try" until the updates are released (fairly soon I think--- hope?) If I were you I would give them a call.... they are pretty responsive.

Similar Messages

Nik Vivenza and Elements

I just installedNik Vivenza on my Mac and I am not seeing it in Elements. The install went OK,
I can't figure it out. I went into the pull-down menu for Plug-ins and found a Nik Plug-in but all it was
was the install instructions. Wht do I do?

I had some problems with the NIK plugins. They worked fine in 9 but not 10. When I contacted NIK they told me (via e-mail) that as 10 was so new, their plug ins weren't working with it yet and would with the next update. I called them and got some help. It is a bit of a complicated process however (even assuming the plug ins were originally installed in the default locations.) They have some beta versions which they sent me to "try" until the updates are released (fairly soon I think--- hope?) If I were you I would give them a call.... they are pretty responsive.

Lightroom,Nik plugins and color spaces

I'm having an issue and not sure who is holding the smoking gun. I have the Nik ultimate collection installed which covers Lightroom and Photoshop CS5 extended. I work primarily in Lightroom and apply most corrections globally but occasionally i need to do localized adjustments so the photo gets shipped off to Photoshop. Here's a typical scenario:
1) From Lightroom edit in Dfine 2.0 for noise - as copy with Lightroom adjustments which gets copied as a tiff.
2) From Lightroom edit in Viveza 2 - as original since we're now working with a tiff and I don't want a copy for every single thing I'm doing.
3) Edit in Photoshop
Now there's two issues at this point:
1) The edits do not show up in the Lightroom history - it's like nothing happened.
2) Photoshop will complain that the assigned profile is sRGB. Really?
#1 is a PITA because if I want to rewind I have to start all over since there's no history - what exactly is responbsible to set an edit as history? Lightroom or the plugin?
#2 is by far the most serious as it degrades the work in a seriously bad manner. I mean, WTH - I'm moving along in ProPhoto Ferrarri space and all of a sudden - *boom* - I'm running in sRGB moped mode.
I looked at edit->Preferences->External Editing -> Additional External Editor and indeed when I select the Nik plugins from the combo box preferences the default for the plugins is sRGB. I can change to ProPhoto and quit. I repeated this for each plugin assuming that somewhere the setting was remembered. Nope LR acts dumb as a rock and shows sRGB as the defaults for all except the currently selected plugin.
So my questions are:
- who's gonna own up to the problem - LR or Nik?
- how can I work around it?
- how can I make LR remember the settings? Not a registry key nor INI file in sight to set them - so where/how are the plugins tracked?
Thanks for any help!
Jon

Jon,
The User Interface for changing how external editors are invoked is about as smart as your average chunk of granite.
After you change the Color Space to the one you want, you have to click on the Preset box and choose "Save current settings as new preset...". Not exactly intuitive, but there you are.
Hal

Nik plugin and 3 weird problem

I know about the 32bit issue with the nik plugins but when I try and use any of the nik plugins I get an error message"Editing Error this message cannot be rendered for editing becuase Aperture does not support the image"
The images are Nikon RAW work fine with A3 in 32 or 64 bit mode, but with none of the Nik software. Nik support says it is an Apple problem but can not find anywhere but here to find a solution. Anyone have any idea what is going on ?
I have tried in 64 bit with it switching 32bit and also forcing it to 32bit mode in get info.
john

a friend of mine is having similar problem with a BorderFX plugin. initially we thought because of 32-bit plugin but after upgrading to 64-bit version, A3 still wouldn't render preview from the images manipulated from the plugin. have tried turning off the generating preview option from A3 preference?
it might reset the A3 preview setting.

NIK Plugins and window position

Hi folks,
i installed the NIK Plugin Suite. Everythings works fine until i open let's say color efex pro. The menubar goes behind the aperture menubar and i'm not able to click on it to resize color efex.
resize is only possible dragging the lower right corner to minimize color efex.
After restarting it it's centered on the screen but to small to use it. Resizing it is now possible but after a new start the same thing again. Menubar is covered by the aperture menubar.
btw: i resintalled color efex pro several times. even did an aperture reinstall....No success
The same strange behavior when i'm running silver efex or viveza. What's going on here?
Didn't have any problems with a previous installation.
I use the latest version of aperture (2.1.2) and osx 10.5.6 and the latetst version of the NIK plugins
Any suggestions?
kind regards
frank

Had the same thing happen to me. Asked Nik Software. This is their reply:
+To correct this issue go to the following location on your Mac:+
+Macintosh HD | Users | <your user name> | Library | Preferences+
+Find the file called, com.niksoftware.sep.aperture_edit.prefs+
+Do a control + click to the file and click open With >Other… and then choose the TextEdit application.+
+In TextEdit, for DialogX= and DialogY= change the numbers to 20. So it will say DialogX=20 and DialogY=20 for example. Then for DialogWidth= change to 800 and for DialogHeight= change to 600. Now save this file and close it.+
+Next open the file, com.niksoftware.cep3Complete.aperture_edit.prefs and do the same thing as above.+
+Now reopen Aperture and select an image, then bring up Silver Efex Pro or Color Efex Pro 3.0 to see if that corrects the issue. If you still cannot resize it, go back and change the number to another higher or lower value until you can see the title bar.+
It may be that there is a better solution. In my case once I made the correction I can now deal with it. In my case I use a second monitor. When I start any of the Nik plugins the top right part of the window including the window bar overlaps into the external monitor. I can grab it there and move it to the larger external monitor and resize it.
This pretty darn annoying and I was hoping that Nik would make the necessary changes. Especially given no one else seems to have the issue and that the plugins are not cheap. They very useful though.
Cheers... John

Problem With Nik Plugins and Lightroom 4.3

I bought a Drobo Mini and moved my photos and my Lightroom Catalog onto it. The reason I did this was because I just bought a MacBook Pro laptop to supplement my Mac Pro Desktop and I wanted to be able to use both computers with the Drobo Mini and not have to constantly be importing Catalogs back and forth. This was a solution that Tim Grey recommended. The advantage is I can take the Drobo Mini with me on the road and add my new photos directly to the Catalog when I'm traveling, and then when I get home, I can just hook up the Drobo Mini to the Mac Pro Desktop and continue with my work. The problem I've encountered is with my Nik plugins Color Efex Pro 4 and Silver Efex Pro 2. On the new computer everything works fine. On the desktop computer I can't go directly from Lightroom into Color Efex Pro 4 or Silver Efex Pro 2 for the new photos initially downloaded from the new computer. For all my photos downloaded through the old computer, both computers work fine. Only the new computer works with the Nik Filters for the new photos. Also, if I go over to Photoshop from Lightroom, the new photos won't let me just hit "Save" and exit Photoshop. Instead, I have to designate a location for the "Save" as if I was doing a "Save As" and then it doesn't show up in Lightroom unless I import it again. I'm trying to get some answers from Nik but I thought maybe someone on this forum might know what is causing this problem?? Any help greatly appreciated.
SaratogaLefty

Nik developers don't participate in this forum -- it's mainly for developers to discuss technical issues of using the Lightroom Software Developer Kit. You might have better luck reposting in the main LR forum:
http://forums.adobe.com/community/lightroom

NIK Plugins and Shortcuts assignments

I installed the NIK Plugins without any problems. Tried to assign some shortcuts but i can't seem to find them in the command groups when opening the customize keyboard command editor.
Under Main Menu Commands->Images Menu they had no entries. The only entry is the "Open in external Editor".
I could do the assignments in a previous aperture installation easily. What's going on here?
Thanks
frank

it has worked for me to do that ...
are they showing under the image -> edit with ... in the main workspace ??? what i am getting at, is are you able to see them normally and use them ???

Nik software and Elements 11

I recently installed Nik software from Google. It works fine in as much as there is a clear difference between the before and after image. However, when the image is saved, I get a yellow highlight over part of the image as shown below. Am I missing a step in the process of applying the filters?

Hi,
This kind of problem has been observed in PS, PS Elements and also in older versions of Lightroom. It usually originates in the display driver. Make sure you have updated your display driver to the latest version.
Also, this might be a memory problem. What is your PC configuration? You should also check your memory settings in the PSE preferences.

Lr 5 update / Lost Nik Plugins

I updated to the latest Lr 5 (June 20, 2014) and lost most of the Nik Plugins?
Using Plugin Manager doesn't recognize them.
I reinstalled all of the Nik Plugins and that did not help.

You didn't lose anything.
Photoshop CC is an entirely separate product from its predecessor, and is installed in a different set of folders. In fact, unless you uninstalled the old version it's still there and can still be run.
Reinstall your plug-ins after finding out whether there are updated versions specifically for CC. Failing that, you can try copying individual plug-in files into the Photoshop CC plug-ins subfolder (but DO NOT copy all the files from the old version). Some plug-ins require additional files beyond just the .8bf, .8bi, etc. files. But you know what each requires - you got it in the first place. Photoshop CC is no different, really - just in a different place.
Did you have any Extra Plug-ins Folder defined in Photoshop CS6? That's no longer available but there is a workaround.
-Noel

Is there a known problem with Nik Software Plugins and PSE10

I replaced my PC with a new 64-bit Windows 7 workstation. Have used PSE10 for a while for my cataloging and editing and I did 'trial' individual Nik Software plugins on my old Vista PC for a while. I decided to purchase the Nik Software collection and also to take the plunge and go to Lightroom 4 as well. I put PSE10 on my new PC as well because I want to consider how I might modify my workflow to use both in conjunction (perhaps LR4 for cataloging and PSE10 for editing)
When it came to installing Nik Software Plugins (they are supposed to plugin to Elements and LR4) it seemed to find some of the plugins compatible with both PSE10 and LR4 , some compatible with one of them and some not compatable (apparently) with either, but installed them anyway. But when I use PSE10 now I cannot go from the Organizer into the Editor, it loads the editor interface but not the image. If you open PSE Editor directly and open an image, the image will load and you see 4 of the plugins and I invoke them but the changes dont seem to get applied in PSE10. Then I started reading up on the web ..... and the consensus seems to be it is not a Nik Software issue but an Abobe editor plugin issue.
On a side issue, the retailer I bought Nik Software from sent me no product keys (they sent me Apple Aperture keys) - now they are about to replace my delivery with a fresh issue and proper keys ... but if I run into the same problems again, I dont know what to do. This leads me to looking for some definitive advice from those in the know!
Should I forget about buying Nik Software plugins altogether?
I see a download is available for LR4-2 .. does anyone know if this fixes Nik Plugin issues there?
I am minded to go the route of using LR4 as my cataloging preference but to call PSE10 Editor for editing and have all my plugins operate out of PSE10, but I could not get the plugins to work with PSE10 as mentioned. How does one get them to work?
Is there some workaround or special "way" or "order" to install things ???
I'm still waiting days for some support from Nik Software ... but they are just going to say there is nothing wrong with their product (and the web seems to concur)
Any help would be appreciated on the PSE10 Issue.

17/10/2012. I installed the update - Lightroom 4.2
It keeps the same product key and found the catalog and the Windows Control Panel only seems V4.2 so the original has been replaced with this upgrade.
This would be the first time I put down Lightroom with Photoshop Elements V.10 already there on the system and I suspect this might have helped with better integration between the 2 products.
I made sure I then opened Photoshop Elements V10 and I could edit an image (that the Organizer invocation to Photoshop Elements Editor did sucessfully load the image) and I could use existing plugins like Topaz and Noiseware. Also I made sure Lightroom 4.2 could use "Edit with Photoshop Elements " and it did.
The supplier who had sent me the wrong Nik Software product keys, sent me a corrected version with product keys for Lightroom
Several web articles I read on Nik Software plugins may be misleading (for example there is one on DPReview) which state that Nik Software plugins are compatable with Photoshop (the main product) but are NOT compatable with Photoshop Elements v10. I can tell anyone who uses Photoshop Elements 10 that they ARE compatable with Photoshop Elements 10, but it can be a little tricky to get them going.
This is how I sucessfully managed to get the Nik Software Plug-ins
working (finally) on both Lightroom and Photoshop Elements v10 at the same time
Remember my scenario ... I am putting together a new 64 bit Windows 7 PC and I want to be able to continue to use my Photoshop Elements v10 and also to delve into Lightroom for the first time. I had read all the blurb on Nik Software and it said the plugins were compatable with both and I had downloaded and tested some of them on an old PC anyway, so I knew the principle of installation and operation.
I had just bought the Nik SOftware Complete Collection in September 2012.
The box and the CD they come with .... this is where one of the problems is. Let me explain...
Step 1:
=======
Some of the components on the CD are up to date .. and when you elect to install them the sofware tells you that it has found both Lightroom 4.2 and Photoshop Elements V10 and it installs the plugins no problem and they work. Make sure (in these cases) you take their defaults as to the locations the plugins are instlled to. Typically the dual install works for the following components
Nik Color Efex Prov V4
Nik Silver Efex V2
and the plugins go to
for Photoshop Elements v10 C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins\
for Lightroom 4 C:\users\xxxx\AppData\Roaming\Adobe\Lightroom\External Editor Presets\
After each of the above 2 installs finished I invoked Photoshop Elements v10 first and opened an image in Editor and made sure the plugin was working and inserted my product key and activated it over the web. I then made sure it was also working in Lightroom 4.2 - it was!
Step 2:
=======
When it came to installing the Sharpener 3 component off the vendor's CD, it displayed NEITHER of the two applications on its compatability list at all. And there was no "+" sign where one can add one manually. Furthermore if you continue with setup.exe it crashes. I closed the EXE and confirmed there was no plugin in Photoshop Elements v10 as expected for Sharpener.
But when I went into Lightroom 4.2 it shows me the 2 Sharpener entities (the RAW and Output one). And I used it and proved the plugins were working through Lightroom 4.2 and I inserted my product key for it when invoking it for the first time via Lightroom 4.2 as well.
Then I went onto the Nik Software download site and downloaded a more updated version which was Sharpener Version 3.01. When I ran the installer from this download it actually does see and show both Photoshop Elements v10 and Lightroom 4.2 as "compatable" and it installed the plugins from that .. and they both work ... even though I had it working already (seemingly) from the CD install I obviously installed over it and the plugin still works in Lightroom 4.2. It also works now in Photoshop Elements v10. Only issue I had here was I had to re-insert my product key and activate it when I used the plugin via Photoshop Elements v10 for the first time... but if that is the extent of a techincal difficulty - I would take it anytime!.
Step 3:
=======
When it came to installing Viveza 2 off the CD, it only saw Lightroom 4.2 as compatable. I did something similar in this case. I let it install to Lightroom 4.2 as a plugin and proved it worked and activated its produvt key. Then I downloaded V2.009 off the website. I re-installed from it (over the Lightroom 4.2 one obvously again) and it now also sees Photoshop Elements 10 as compatable and installs correctly. Strangely enough I did not have to enter my product key a second time when I went to invoke the plugins via Photoshop Elements v10 in this case. What the hell! - the subtleties of software!
Step 4:
=======
Dfine 2.0 - the setup for the CD again finds NEITHER of the 2 applications on its compatablity list, but it put it into Lightroom 4.2 anyway (like the Sharpener component behaved) and I proved it worked. Then I downloaded version 2.112 from the Nik Software website and it finds both applications compatable. Also I did have to re-enter my product key when first invoking the plugin via the Photoshop Elements v10 editor (like as in the case of Sharpener)
Step 5:
=======
HDR Efex Pro (which comes on the vendors CD with a promise to a free upgrade to HDR Efex Pro 2) .... the setup.exe sees Lightroom 4.2 as compatable but does not see Photoshop Elements v10. Be careful ... this component is NOT A PLUGIN ... to see and use it in Lightroom 4 you must select photos and then do menu option EXPORT WITH PRESET HDR EFEX PRO. It does not work as a plugin within Photoshop Elements (any version) . I obtained my free upgrade too and it works from Lightroom. Dont even try to configure it manually as a plugin for Elements. Instead if you save files as JPG or TIFF you can open the EXE directly in the Program Files area (if you have 64 bit make sure to open that EXE not the 32 bit one) and you can use it in standalone mode. There is only one menu option within HDr Efex Pro when using it this way ... File-Open.
So to conclude ... (leaving HDR Efex aside because we know it will not plugin to Elements) ... I have them all working in both Lightroom and Elements. As I begin to learn Lightroom and move away from Elements for cataloging and edits, I know I can invoke most of my workflow plugins from both products. People say I should persist in Lightroom, but if for some reason I dont, I have the fall back position of having everything working out of Elements 10 anyway. It's been a bit of chore getting to this point, but others might find my workaround useful.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Aperture 3.2.3 and NIK plugins. Intermittently, the viewer doesn't update an image adjusted using several NIK plugins, though the browser strip does. The viewer updates once Aperture is quit and re-launched. IS there some explanation for this recent behav

Aperture 3.2.3 and NIK plugins. I use several of these plugins. Recently, and intermittently, the edited image fails to update in the viewer until Aperture is quit and re-launched, even though it is updated in the browser strip. I have assumed the NIK software must be working because the problem occurs from time to time regardless of which one is used. Is there some explanation?

See this known issue:
http://support.apple.com/kb/TS4237
Not sure why Apple has not fixed this one yet. It is consistent with NIK plug-ins as well as Photoshop (CS5 and CS6).
Big fumble from my point of view.

How do I get Nik, OnOne, and Topaz plugins to work with Photoshop CC?

I recently installed the CC versions of Photoshop and Bridge, but all my plugins disappeared. I've tried reinstalling them, but they still don't appear in Photoshop CC. I use Nik, OnOne, and Topaz plugins - need help to get them to work in Photoshop CC! Thanks! This is on a Windows 7 PC.

Nik are still working on their CC installers. See here for their instructions on manual installation
https://support.google.com/nikcollection/answer/3212033?hl=en&ref_topic=3000839
Topaz instructions
http://www.topazlabs.com/support/kb/index.php?View=entry&EntryID=401
onOne Software
https://www.ononesoftware.com/support/3211/

Plugins from Elements 8 to CS5

Hi I have just upgraded from Elements 8 to CS5. My question if anyone can help is I have lots of plugins in Elements
Flood, Topaz Adjust 4, Nik Complete that I use in elements can and if so how do you copy these to CS5?
Or do I have to reload everything?
Thanks in advance.
Mike

With the caveat that not many folks here are familiar with Elements—that's why there's a separate Photoshop Elements forum—I'd say you need to determine that there are 64-bit versions of those plug-ins, then try installing said 64-bit plug-ins in CS5 with their original installer or following whatever installation instructions the developers provide you with.
But, yes, you have to install everything from scratch in any event. Do not copy or clone them from your Elements install.
Wo Tai Lao Le
我太老了

Problems integrating Lightroom 4.2 and Elements 10.

I have installed Lightroom 4.2 and Elements 10. Although I have installed it so that Elements 10 shows up in the Edit Photo menu, when I click on that it does not copy or load the photo I have edited in Lightroom into Elements. There is just an empty Elements 10 screen except that there is a dialogue box showing some of my Nik software plugins. The dialogue box does not work. I had the edit photo in Elements 10 working in Lightroom 4.0 before I installed the upgrade. to Lightroom 4.2. Does anyone know how to fix this?

Ensure you are linking to the Editor application in Lightroom preferences. A common mistake is to choose the Adobe Photoshop Elements shortcut. On Mac OSX it's in Support files.
Windows:
Mac

NIK plugins and elements 10

Similar Messages

Maybe you are looking for