NIK Plugins and window position

Hi folks,
i installed the NIK Plugin Suite. Everythings works fine until i open let's say color efex pro. The menubar goes behind the aperture menubar and i'm not able to click on it to resize color efex.
resize is only possible dragging the lower right corner to minimize color efex.
After restarting it it's centered on the screen but to small to use it. Resizing it is now possible but after a new start the same thing again. Menubar is covered by the aperture menubar.
btw: i resintalled color efex pro several times. even did an aperture reinstall....No success
The same strange behavior when i'm running silver efex or viveza. What's going on here?
Didn't have any problems with a previous installation.
I use the latest version of aperture (2.1.2) and osx 10.5.6 and the latetst version of the NIK plugins
Any suggestions?
kind regards
frank

Had the same thing happen to me. Asked Nik Software. This is their reply:
+To correct this issue go to the following location on your Mac:+
+Macintosh HD | Users | <your user name> | Library | Preferences+
+Find the file called, com.niksoftware.sep.aperture_edit.prefs+
+Do a control + click to the file and click open With >Other… and then choose the TextEdit application.+
+In TextEdit, for DialogX= and DialogY= change the numbers to 20. So it will say DialogX=20 and DialogY=20 for example. Then for DialogWidth= change to 800 and for DialogHeight= change to 600. Now save this file and close it.+
+Next open the file, com.niksoftware.cep3Complete.aperture_edit.prefs and do the same thing as above.+
+Now reopen Aperture and select an image, then bring up Silver Efex Pro or Color Efex Pro 3.0 to see if that corrects the issue. If you still cannot resize it, go back and change the number to another higher or lower value until you can see the title bar.+
It may be that there is a better solution. In my case once I made the correction I can now deal with it. In my case I use a second monitor. When I start any of the Nik plugins the top right part of the window including the window bar overlaps into the external monitor. I can grab it there and move it to the larger external monitor and resize it.
This pretty darn annoying and I was hoping that Nik would make the necessary changes. Especially given no one else seems to have the issue and that the plugins are not cheap. They very useful though.
Cheers... John

Similar Messages

Lightroom,Nik plugins and color spaces

I'm having an issue and not sure who is holding the smoking gun. I have the Nik ultimate collection installed which covers Lightroom and Photoshop CS5 extended. I work primarily in Lightroom and apply most corrections globally but occasionally i need to do localized adjustments so the photo gets shipped off to Photoshop. Here's a typical scenario:
1) From Lightroom edit in Dfine 2.0 for noise - as copy with Lightroom adjustments which gets copied as a tiff.
2) From Lightroom edit in Viveza 2 - as original since we're now working with a tiff and I don't want a copy for every single thing I'm doing.
3) Edit in Photoshop
Now there's two issues at this point:
1) The edits do not show up in the Lightroom history - it's like nothing happened.
2) Photoshop will complain that the assigned profile is sRGB. Really?
#1 is a PITA because if I want to rewind I have to start all over since there's no history - what exactly is responbsible to set an edit as history? Lightroom or the plugin?
#2 is by far the most serious as it degrades the work in a seriously bad manner. I mean, WTH - I'm moving along in ProPhoto Ferrarri space and all of a sudden - *boom* - I'm running in sRGB moped mode.
I looked at edit->Preferences->External Editing -> Additional External Editor and indeed when I select the Nik plugins from the combo box preferences the default for the plugins is sRGB. I can change to ProPhoto and quit. I repeated this for each plugin assuming that somewhere the setting was remembered. Nope LR acts dumb as a rock and shows sRGB as the defaults for all except the currently selected plugin.
So my questions are:
- who's gonna own up to the problem - LR or Nik?
- how can I work around it?
- how can I make LR remember the settings? Not a registry key nor INI file in sight to set them - so where/how are the plugins tracked?
Thanks for any help!
Jon

Jon,
The User Interface for changing how external editors are invoked is about as smart as your average chunk of granite.
After you change the Color Space to the one you want, you have to click on the Preset box and choose "Save current settings as new preset...". Not exactly intuitive, but there you are.
Hal

Nik plugin and 3 weird problem

I know about the 32bit issue with the nik plugins but when I try and use any of the nik plugins I get an error message"Editing Error this message cannot be rendered for editing becuase Aperture does not support the image"
The images are Nikon RAW work fine with A3 in 32 or 64 bit mode, but with none of the Nik software. Nik support says it is an Apple problem but can not find anywhere but here to find a solution. Anyone have any idea what is going on ?
I have tried in 64 bit with it switching 32bit and also forcing it to 32bit mode in get info.
john

a friend of mine is having similar problem with a BorderFX plugin. initially we thought because of 32-bit plugin but after upgrading to 64-bit version, A3 still wouldn't render preview from the images manipulated from the plugin. have tried turning off the generating preview option from A3 preference?
it might reset the A3 preview setting.

NIK plugins and elements 10

I just installed elements 10 but when I try to add my NIK plugins- silver efex 2, viveza 2 and color efex 3- it states it cannot read the files. Does anyone else have this problem? Suggestions? Thanks Ron

I had some problems with the NIK plugins. They worked fine in 9 but not 10. When I contacted NIK they told me (via e-mail) that as 10 was so new, their plug ins weren't working with it yet and would with the next update. I called them and got some help. It is a bit of a complicated process however (even assuming the plug ins were originally installed in the default locations.) They have some beta versions which they sent me to "try" until the updates are released (fairly soon I think--- hope?) If I were you I would give them a call.... they are pretty responsive.

Problem With Nik Plugins and Lightroom 4.3

I bought a Drobo Mini and moved my photos and my Lightroom Catalog onto it. The reason I did this was because I just bought a MacBook Pro laptop to supplement my Mac Pro Desktop and I wanted to be able to use both computers with the Drobo Mini and not have to constantly be importing Catalogs back and forth. This was a solution that Tim Grey recommended. The advantage is I can take the Drobo Mini with me on the road and add my new photos directly to the Catalog when I'm traveling, and then when I get home, I can just hook up the Drobo Mini to the Mac Pro Desktop and continue with my work. The problem I've encountered is with my Nik plugins Color Efex Pro 4 and Silver Efex Pro 2. On the new computer everything works fine. On the desktop computer I can't go directly from Lightroom into Color Efex Pro 4 or Silver Efex Pro 2 for the new photos initially downloaded from the new computer. For all my photos downloaded through the old computer, both computers work fine. Only the new computer works with the Nik Filters for the new photos. Also, if I go over to Photoshop from Lightroom, the new photos won't let me just hit "Save" and exit Photoshop. Instead, I have to designate a location for the "Save" as if I was doing a "Save As" and then it doesn't show up in Lightroom unless I import it again. I'm trying to get some answers from Nik but I thought maybe someone on this forum might know what is causing this problem?? Any help greatly appreciated.
SaratogaLefty

Nik developers don't participate in this forum -- it's mainly for developers to discuss technical issues of using the Lightroom Software Developer Kit. You might have better luck reposting in the main LR forum:
http://forums.adobe.com/community/lightroom

NIK Plugins and Shortcuts assignments

I installed the NIK Plugins without any problems. Tried to assign some shortcuts but i can't seem to find them in the command groups when opening the customize keyboard command editor.
Under Main Menu Commands->Images Menu they had no entries. The only entry is the "Open in external Editor".
I could do the assignments in a previous aperture installation easily. What's going on here?
Thanks
frank

it has worked for me to do that ...
are they showing under the image -> edit with ... in the main workspace ??? what i am getting at, is are you able to see them normally and use them ???

Project language and window position

Hi everyone,
I have defined the project language as English.
The Portal is set to English language also.
When I display a dialog box or window using the CENTER attribut, everything works fine.
Now, if I et my Portal to hebrew language, all those dialog boxes and windows are displayed at random places on the screen.
Does the project language has something to do with the position of windows and DB ?
Thanks.

David,
Yes, language settings may affect layout.
There are LTR (left-to-right) writing languages (English, Russian) and RTL (right-to-left) writing languages (Hebrew, Arabic)
WD explicitly supports RTL languages (sure, along with LTR), so it tries to apply RTL logic not only to text but also to layout and flow of controls. This causes the behavior you observing.
However, in my uderstanding CENTER means the very same place in either RTL or LTR, so this is probably a bug in RTL support code...
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Authorware, Plugins, and Windows Vista

I am currently enrolled in an online course through Johns
Hopkins University that requires the Adobe authorware player to
teach its lessons. The lessons are accessible through cybered.com.
Everytime I try to install the Authorware player, a window appears
titled "Plugin LaunchApp" and inside the window, it says "Access
Denied." I tried installing the Adobe Flash Player because I
thought that this was the "plugin" that I needed. Unfortunately,
that still did not help when I tried installing the authorware
player again.
My computer model is the Presario V6000 and I have Windows
Vista. I also have Internet Explorer. I don't know what this window
means though; can you please help? I'm desperate because I really
need to start this distance education program, and the authorware
player is obviously essential to the program.

"runnforfunn" <[email protected]> wrote in
message
news:g464ak$ft9$[email protected]..
>I am currently enrolled in an online course through Johns
Hopkins
>University
> that requires the Adobe authorware player to teach its
lessons. The
> lessons are
> accessible through cybered.com. Everytime I try to
install the Authorware
> player, a window appears titled "Plugin LaunchApp" and
inside the window,
> it
> says "Access Denied." I tried installing the Adobe Flash
Player because I
> thought that this was the "plugin" that I needed.
Unfortunately, that
> still did
> not help when I tried installing the authorware player
again.
> My computer model is the Presario V6000 and I have
Windows Vista. I also
> have
> Internet Explorer. I don't know what this window means
though; can you
> please
> help? I'm desperate because I really need to start this
distance education
> program, and the authorware player is obviously
essential to the program.
Are you an admin user or just an ordinary user?
I suspect that if you contact Johns Hopkins Tech support,
they will have
encountered this problem before and will be more familiar
with the details
of their own deployment.
HTH;
Amy

Photoshop Plugin and Windows XP style?

Hello,
can anybody tell me, how I can use the Windows XP style for my export-plugin.
It is possible to use manifest files, or in which direction I have to give the support of Windows XP styles to my plugin.
Thanks a lot,
Klaus

No you are only licensed to use Photoshop Lightroom 4. If you wish to obtain a license for Lightroom 3 you will need to find a reseller still offering the older version of the software.

Lr 5 update / Lost Nik Plugins

I updated to the latest Lr 5 (June 20, 2014) and lost most of the Nik Plugins?
Using Plugin Manager doesn't recognize them.
I reinstalled all of the Nik Plugins and that did not help.

You didn't lose anything.
Photoshop CC is an entirely separate product from its predecessor, and is installed in a different set of folders. In fact, unless you uninstalled the old version it's still there and can still be run.
Reinstall your plug-ins after finding out whether there are updated versions specifically for CC. Failing that, you can try copying individual plug-in files into the Photoshop CC plug-ins subfolder (but DO NOT copy all the files from the old version). Some plug-ins require additional files beyond just the .8bf, .8bi, etc. files. But you know what each requires - you got it in the first place. Photoshop CC is no different, really - just in a different place.
Did you have any Extra Plug-ins Folder defined in Photoshop CS6? That's no longer available but there is a workaround.
-Noel

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Is there a known problem with Nik Software Plugins and PSE10

I replaced my PC with a new 64-bit Windows 7 workstation. Have used PSE10 for a while for my cataloging and editing and I did 'trial' individual Nik Software plugins on my old Vista PC for a while. I decided to purchase the Nik Software collection and also to take the plunge and go to Lightroom 4 as well. I put PSE10 on my new PC as well because I want to consider how I might modify my workflow to use both in conjunction (perhaps LR4 for cataloging and PSE10 for editing)
When it came to installing Nik Software Plugins (they are supposed to plugin to Elements and LR4) it seemed to find some of the plugins compatible with both PSE10 and LR4 , some compatible with one of them and some not compatable (apparently) with either, but installed them anyway. But when I use PSE10 now I cannot go from the Organizer into the Editor, it loads the editor interface but not the image. If you open PSE Editor directly and open an image, the image will load and you see 4 of the plugins and I invoke them but the changes dont seem to get applied in PSE10. Then I started reading up on the web ..... and the consensus seems to be it is not a Nik Software issue but an Abobe editor plugin issue.
On a side issue, the retailer I bought Nik Software from sent me no product keys (they sent me Apple Aperture keys) - now they are about to replace my delivery with a fresh issue and proper keys ... but if I run into the same problems again, I dont know what to do. This leads me to looking for some definitive advice from those in the know!
Should I forget about buying Nik Software plugins altogether?
I see a download is available for LR4-2 .. does anyone know if this fixes Nik Plugin issues there?
I am minded to go the route of using LR4 as my cataloging preference but to call PSE10 Editor for editing and have all my plugins operate out of PSE10, but I could not get the plugins to work with PSE10 as mentioned. How does one get them to work?
Is there some workaround or special "way" or "order" to install things ???
I'm still waiting days for some support from Nik Software ... but they are just going to say there is nothing wrong with their product (and the web seems to concur)
Any help would be appreciated on the PSE10 Issue.

17/10/2012. I installed the update - Lightroom 4.2
It keeps the same product key and found the catalog and the Windows Control Panel only seems V4.2 so the original has been replaced with this upgrade.
This would be the first time I put down Lightroom with Photoshop Elements V.10 already there on the system and I suspect this might have helped with better integration between the 2 products.
I made sure I then opened Photoshop Elements V10 and I could edit an image (that the Organizer invocation to Photoshop Elements Editor did sucessfully load the image) and I could use existing plugins like Topaz and Noiseware. Also I made sure Lightroom 4.2 could use "Edit with Photoshop Elements " and it did.
The supplier who had sent me the wrong Nik Software product keys, sent me a corrected version with product keys for Lightroom
Several web articles I read on Nik Software plugins may be misleading (for example there is one on DPReview) which state that Nik Software plugins are compatable with Photoshop (the main product) but are NOT compatable with Photoshop Elements v10. I can tell anyone who uses Photoshop Elements 10 that they ARE compatable with Photoshop Elements 10, but it can be a little tricky to get them going.
This is how I sucessfully managed to get the Nik Software Plug-ins
working (finally) on both Lightroom and Photoshop Elements v10 at the same time
Remember my scenario ... I am putting together a new 64 bit Windows 7 PC and I want to be able to continue to use my Photoshop Elements v10 and also to delve into Lightroom for the first time. I had read all the blurb on Nik Software and it said the plugins were compatable with both and I had downloaded and tested some of them on an old PC anyway, so I knew the principle of installation and operation.
I had just bought the Nik SOftware Complete Collection in September 2012.
The box and the CD they come with .... this is where one of the problems is. Let me explain...
Step 1:
=======
Some of the components on the CD are up to date .. and when you elect to install them the sofware tells you that it has found both Lightroom 4.2 and Photoshop Elements V10 and it installs the plugins no problem and they work. Make sure (in these cases) you take their defaults as to the locations the plugins are instlled to. Typically the dual install works for the following components
Nik Color Efex Prov V4
Nik Silver Efex V2
and the plugins go to
for Photoshop Elements v10 C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins\
for Lightroom 4 C:\users\xxxx\AppData\Roaming\Adobe\Lightroom\External Editor Presets\
After each of the above 2 installs finished I invoked Photoshop Elements v10 first and opened an image in Editor and made sure the plugin was working and inserted my product key and activated it over the web. I then made sure it was also working in Lightroom 4.2 - it was!
Step 2:
=======
When it came to installing the Sharpener 3 component off the vendor's CD, it displayed NEITHER of the two applications on its compatability list at all. And there was no "+" sign where one can add one manually. Furthermore if you continue with setup.exe it crashes. I closed the EXE and confirmed there was no plugin in Photoshop Elements v10 as expected for Sharpener.
But when I went into Lightroom 4.2 it shows me the 2 Sharpener entities (the RAW and Output one). And I used it and proved the plugins were working through Lightroom 4.2 and I inserted my product key for it when invoking it for the first time via Lightroom 4.2 as well.
Then I went onto the Nik Software download site and downloaded a more updated version which was Sharpener Version 3.01. When I ran the installer from this download it actually does see and show both Photoshop Elements v10 and Lightroom 4.2 as "compatable" and it installed the plugins from that .. and they both work ... even though I had it working already (seemingly) from the CD install I obviously installed over it and the plugin still works in Lightroom 4.2. It also works now in Photoshop Elements v10. Only issue I had here was I had to re-insert my product key and activate it when I used the plugin via Photoshop Elements v10 for the first time... but if that is the extent of a techincal difficulty - I would take it anytime!.
Step 3:
=======
When it came to installing Viveza 2 off the CD, it only saw Lightroom 4.2 as compatable. I did something similar in this case. I let it install to Lightroom 4.2 as a plugin and proved it worked and activated its produvt key. Then I downloaded V2.009 off the website. I re-installed from it (over the Lightroom 4.2 one obvously again) and it now also sees Photoshop Elements 10 as compatable and installs correctly. Strangely enough I did not have to enter my product key a second time when I went to invoke the plugins via Photoshop Elements v10 in this case. What the hell! - the subtleties of software!
Step 4:
=======
Dfine 2.0 - the setup for the CD again finds NEITHER of the 2 applications on its compatablity list, but it put it into Lightroom 4.2 anyway (like the Sharpener component behaved) and I proved it worked. Then I downloaded version 2.112 from the Nik Software website and it finds both applications compatable. Also I did have to re-enter my product key when first invoking the plugin via the Photoshop Elements v10 editor (like as in the case of Sharpener)
Step 5:
=======
HDR Efex Pro (which comes on the vendors CD with a promise to a free upgrade to HDR Efex Pro 2) .... the setup.exe sees Lightroom 4.2 as compatable but does not see Photoshop Elements v10. Be careful ... this component is NOT A PLUGIN ... to see and use it in Lightroom 4 you must select photos and then do menu option EXPORT WITH PRESET HDR EFEX PRO. It does not work as a plugin within Photoshop Elements (any version) . I obtained my free upgrade too and it works from Lightroom. Dont even try to configure it manually as a plugin for Elements. Instead if you save files as JPG or TIFF you can open the EXE directly in the Program Files area (if you have 64 bit make sure to open that EXE not the 32 bit one) and you can use it in standalone mode. There is only one menu option within HDr Efex Pro when using it this way ... File-Open.
So to conclude ... (leaving HDR Efex aside because we know it will not plugin to Elements) ... I have them all working in both Lightroom and Elements. As I begin to learn Lightroom and move away from Elements for cataloging and edits, I know I can invoke most of my workflow plugins from both products. People say I should persist in Lightroom, but if for some reason I dont, I have the fall back position of having everything working out of Elements 10 anyway. It's been a bit of chore getting to this point, but others might find my workaround useful.

How do I get Nik, OnOne, and Topaz plugins to work with Photoshop CC?

I recently installed the CC versions of Photoshop and Bridge, but all my plugins disappeared. I've tried reinstalling them, but they still don't appear in Photoshop CC. I use Nik, OnOne, and Topaz plugins - need help to get them to work in Photoshop CC! Thanks! This is on a Windows 7 PC.

Nik are still working on their CC installers. See here for their instructions on manual installation
https://support.google.com/nikcollection/answer/3212033?hl=en&ref_topic=3000839
Topaz instructions
http://www.topazlabs.com/support/kb/index.php?View=entry&EntryID=401
onOne Software
https://www.ononesoftware.com/support/3211/

Compiz, window position and decoration

Hi all,
I was kind of "forced" to install Compiz on my XFCE desktop, due to the video playback tearing caused by the buggy Sandy Bridge Linux support.
So, everything runs fine. Except for two things:
1-Window decorations. Is there any way for Compiz to use XFCE window decorations instead of Emerald? I use "gtk-window-decorator", but it weirdly use a WD theme which isn't even the Emerald or the XFCE one.
2-Every window I open goes to the top-left corner of the screen. Is there any way for opening on center, or, even better, on the last position they were? XFCE does this by default.
Thanks for any help.
R.

You might try setting compiz to use XFCE decorations in ccsm. Open the Window Decoration plugin and in the "command" field:
xfwm --replace
If this doesn't work or if windows are still being placed in the corner, you can enable the Place Windows plugin and set placement mode to centered. I don't think compiz can remember the last placement of each window, but I like using Smart placement. You can also go to the Fixed Placement tab and set any windows that you always want placed in a certain location.

How do I stop Firefox from claiming to have sessionrestore errors or opening the wrong session items and/or remember the wrong window size and/or position.

Since automatically updating to version 25 Firefox is randomly opening recent tabs and windows from the browsing history, and/or randomly positioning the browser window from history.
Currently using Firefox 25.0.1 on Windows Vista and Windows 7. Problems started immediately after automatic updates to 25.0.0. Problems are most noticeable on the Vista box because it has so much screen geography (the Windows 7 box is a laptop).
Problems include:
Firefox may open the correct tabs into a properly sized and positioned window, without problem. (Not a problem, included for completeness since it does, occasionally, work without error).
Firefox open a single empty tab (about:blank, my Home page). (Listed as a problem because Firefox simply forgot the tab which was open.)
Firefox may claim it cannot open the correct tabs and pop up about:sessionrestore. Proceeding will open all tabs (usually only one or two for me). This gives the impression Firefox did not actually have a problem. But, then, often, the tab Firefox is having problems restoring is about:blank so I should hope there was no problem!
Firefox may open randomly selected recent browsing items, without other problems. This gives the impression that Firefox does not properly record recent history for about:sessionrestore. Checking History appears correct; Firefox simply reached back hours, or days, or even weeks, and restored a random session from long ago.
Any of the above may occur, but the window position and/or size will be randomly selected from another recent history item. This is most noticeable when the position is on the wrong monitor and can be annoying since Firefox simply "disappears" if (as it often is for me) that other monitor is disconnected or powered off.

If you use cleanup software like CCleaner then check the settings for the Firefox application.<br />
Also make sure that your anti-virus software doesn't mess with files in the Firefox profile folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

NIK Plugins and window position

Similar Messages

Maybe you are looking for