Nike Runs are Not synced to Nike+ site

Hi,
it's being Several month that I can't sync my runs from I-Tunes to Nike+ web site,
When I press the "Send Runs To Nike" the process is halted after a few seconds, and I don't see the "Visit Nike" button.
I enable disk usage and saw that there are about 9 runs in the "synced" folder.
It's really frustrating that suddenly the runs are not synced, Both I-tunes and Ipod are updated to latest versions and I can't understand why I cant upload my runs any longer.
Please Help
Ran.

The problem seems to be an issue with the nike plus site.
Even if you are already logged in when you’re taken to the nike plus website when syncing your run via itunes on the mac, it prompts you to a page in an other window in safari to either login or create an account to save your run.
If you click save run you loose the run and no matter how many times you try to resync it, it just doesn't seem to work....So far this happened twice (but) if you select login from within the same screen that pops up after you've completed a run, it will be saved.
< Edited by Host >

Similar Messages

  • Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

    Since Mavericks update my iPhone and iPad calendars
    are NOT syncing with the calendar on my MacBook Pro.
    I used to use iTunes but don't see the options now.
    Does anyone know how to set up a sync.?

    I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
    both calendar and contacts and imported them in the MBA and synced normally.
    Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
    I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
    update the iphone until a permanent solution is found !
    And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
    I'm sure Samsung is having a ball ever since the sync issue was made public !
    Hopefully Apple is listening and will make things right again !

  • Project Server 2010 / Sharepoint 2010 Permissions not syncing to Project Site

    Project Permissions not syncing to Project Site
    Project Manager Group
    New project is created and published project server sends permissions to Sharepoint which puts users into the following groups:
    <dir><dir></dir></dir><dir><dir>
    Web Administrator (Microsoft Project Server)
    Project Managers (Microsoft Project Server)
    Team members (Microsoft Project Server)
    Readers (Microsoft Project Server)
    At this time the creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager rights on the sharepoint site, and Admins will have Web Admin permissions.
    Issue #1: Only the Web Admin permissions and creator/owner permissions are being added to the Sharepoint permission groups
    Workaround #1: Going into the project site permissions and adding the
    Project Managers (Microsoft Project Server) group manually and the sync will keep the permissions
    Workaround #2: Going into the Server Settings, Manager Groups then removing or add all users to the No Permission Group, which forces an sync to all workspaces. Con: This workaround can only be down at night when users are not active since it will
    block the queue for at least an hour.
    Project Owner Transfer
    Previously created project has owner change, once saved and published project server sends permissions to update user’s permission to
    Project Managers (Microsoft Project Server) on Sharepoint project site.
    Issue #2: When Project owner is changed and project is published the owner is not getting permissions to the Sharepoint project site. However, if owner is also added to the team using the Build Team Feature the sync will give the owner Project
    Manager permissions on the Project Site.
    Workaround #1: Going into Server Settings, Project Sites, select project and Synchronize. Once this is done, the owner will have Project Manager Permissions without being added to the team.
    Users who have been added to this project in Project Server 2010, but not assigned to tasks. Users who have assignments in this project in Project Server 2010 and are contributors to the project workspace site,
    meaning that they can create and edit documents, issues, and risks. Users who have published this project or who have
    Save Project permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks. Users who have
    Manage SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks.</dir></dir>

    By default when you create project build team add users in the task and publish the project plan then All the User which are available in the project plan including Project owner will go to below mentioned group in project site:
    1. creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager will get access to Project Managers (Microsoft Project Server)
    2. User who are having team member access to PWA will get Team members (Microsoft Project Server) access if they are assigned to the project task.
    3. User who are having team member access to PWA will get Readers (Microsoft Project Server) access if they are not assigned to the project task.
    4. Only PWA Administrator will get the access to Web Administrator (Microsoft Project Server)
    Sharepoint permission you have to use when you want to give permission manually to users on project site  
    In the Project Site provisioning setting under Server setting if you have Check to automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project
    Server.
    Then all the user get access as per describe above and if you will give access manually to any of the user either in project server group or in Sharepoint group once you will publish the project next time all the manually given permission will go away.
    IF you want to give permission to user manually to sharepoint group or project server group then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions
    change in Project Server.
    You check PWA site setting --> Site permission then member of Sharepoint group user who will have access to sharepoint group in PWA site setting site permission will have access to all the project site sharepoint group as Project site inherit permission
    from PWA root site.
    Both the issue which you have described is behavior of project site.
    For issue 2 when first time project owner create and publish the project and projectsite is getting created then porject owner name gets access  in the porject manager (project server group) nect time if you will change the owner and publish the project
    until he will not present in the project plan will not get the permission.
    If you want to give sharepoint permission to users then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project Server and give
    the permission manually. 
    Project site in 2010 has some issue and not full filling customer need some time ,Ms has came up with 2013 which is having tight integration with project sites .
    Project workspace security groups are equal to the SharePoint Server 2010 security groups.
    Web Administrator equals Full Control
    Project Managers equals Design
    Team members equals Contribute
    Readers equals Read
    Users who have Manage
    SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can
    create and edit documents, issues, and risks will get access to Web Administrator (Microsoft Project Server)
    http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
    kirtesh

  • Do you have fix for Photo Booth Audio and Video are not syncing properly, Do you have fix for Photo Booth Audio and Video are not syncing properly

    My audio and video are not syncing properly. There is a lag from the audio to the video.  Does anyone have a permanent fix for Photo Booth where the Audio and Video are not syncing properly?

    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads. You aren't the only one having this problem.
    One person having a Photo Booth problem, although not the same one as you are having solved it by running Disk Utility/Repair Permissions.

  • Games are not syncing across iOS devices

    My games are not syncing across my iOS devices. Both my iPhone and iPad are running the same software and are linked to the same account. However my games don't seem to sync. Which is annoying if I'm playing a game on one device I have to start over on another. For example temple run does not sync. Anyone have any suggestions. I'm also having the same problem with infinity blade 2.

    Game syncs only work for games that support iCloud. The game developer has to enable that feature. There are several games such as Jetpack Joyride and League of Evil 2 that support iCloud syncing of games. Unfortunately, other games like Temple Run don't do that since the dev never implemented that feature.

  • HT1296 I'm having difficulty syncing my iCal between my home computer and iPhone.  New entries from my home are not syncing with the phone and vice-versa.  I didn't have any problems with this before until the latest phone update.  Any suggestions?

    I'm having difficulty syncing my iCal between my home computer and iPhone.  New entries from my home are not syncing with the phone and vice-versa.  I didn't have any problems with this before until the latest phone update.  Any suggestions?

    It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
    If you are getting the voice and everything turned on as before, then I am at a loss for words.

  • Voice memos are not syncing

    I've used my iPhone 4 to sync voice memos to iTunes previously and it has worked seamlessly. My new recordings on a 5s are not syncing across. I have checked the sync voice memos box. Even within the 'on this phone' tab the recording aren't visible...just the old ones show up.
    If anyone help it would be appreciated...I have tried the other methods on the forum but they dont help such as trimming files.

    I found the answer, at least it worked for me.
    Here ya go:
    1) open the Voice Memos app on your iPhone
    2) on any memo: click the little blue arrow on the right
    3) Click the next arrow in the top most box this will put you in the "Label" screen
    4) From the "Label" screen: click the arrow next to "Custom"
    5) In the Custom screen: give the memo a name (click Done)
    6) Click the left arrow (top left) to go back to your memos.
    You'll see that you memo as a name. I changed mine from "4:25 PM" to "Fishcakes".
    7) Sync your iPhone and you are good to go.
    NOTE: If for some reason this doesn't work, go back into the same "naming" list on your Iphone voice memos app, and try one of the standard labels instead of a custom one. With one that wouldn't sync, I changed it to "Memo" and then synced it again, and then it worked.

  • Google contacts and calendar events entered on my iPhone 5s are not syncing with my google account.

    Newly entered contacts and calendar events entered on my IPhone 5s are not syncing to google.
    Facts that may be pertinent:
    - I switched from the iPhone 4 to the iPhone 5s and did the easy option of having it automatically set up like my previous phone, so I did not change any part of the setup. It is possible that it stopped syncing at that time, based on which contacts have synced and which haven't.
    - My gmail account is set up as Exchange, with Mail, Contacts, and Calendars set to sync.
    - Server: m.google.com, Use SSl is on, S/MIME is off (I don't actually know what these are, but maybe they matter?)
    - Fetch New Data / Gmail account is set to Push
    - Contacts and Calendar Default Account is Gmail
    - In the Contacts app under Groups I have only GMAIL checked.
    I've read that Google recommends CardDAV, which I gather is not the same as Exchange?
    I'm afraid to delete anything and start over, for fear of losing my contacts.
    Is there a difference between the gmail account I set up and what the Contacts app calls GMAIL?
    If there is anything I should communicate about how things are set up on the Google end, let me know.
    Thanks in advance for help!

    Hello Marsden,
    Try this...
    Go to the isync program on your Mac. 
    Go to Preferences in the main menu
    Hit Reset Sync History
    I'm pretty sure this is how I fixed it... so far so good.
    Let me know if that works for you!

  • Contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    contacts and calendar are not syncing? the word info is not in the selection iTunes sync menu

    Hey jimneeds,
    Thanks for the question. This feature was discontinued with OS X Mavericks:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/HT1386
    What you can sync
    […] - Contacts*
    *To sync this content on an iOS device using OS X Mavericks v10.9 or later, use iCloud or another cloud-based service.
    Thanks,
    Matt M.

  • Photos taken on my Treo 755p are not syncing to my computer.

    Photos taken on my Treo 755p are not syncing to my computer, while the rest of the sync process performs flawlessly. The photos used to transfer to the 'Palm' folder under 'My Pictures' on Windows XP. The transfer used to occur with no problem...but I'm currently not having any luck. I went so far as to backup my Palm files, delete the Palm Desktop software, re-install it and then HotSync the new software with my phone. Does anyone have any tips???
    Your help is much appreciated!
    Thanks!
    Drew
    Post relates to: Treo 755p (Verizon)

    Do you have a media section of the Palm desktop? Is there anything in there? Are the pictures on a SD card or the device? 
    Post relates to: None

  • TS4001 Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's goin

    Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!

    Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
    I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
    Thanks for taking the time to respond though, much appreciated!

  • I am adding new photos to my PC windows 7 desktop but they are not syncing to my ipad.  how can i get these photos to sync

    I am adding new photos to  my PC windows 7 desktop but they are not syncing to my ipad when I sync the Ipad.  How can I get these photos into my Ipad?

    Skydiver.
    you and I know that your answer works because that is how I sync my ipad.  I don't have a mac, just a PC with itunes. Now this guy might not even have itunes and is using Windows Media Player or something like that.
    Or maybe he just do not want his problem fixed.  I read these forums and too many of the questions are just way beyond basic computer knowledge, but it seems to happen that they can never resolve a very simple problem.  It makes me wonder if people just post bogus stuff.
    I would like to see registration to the forums attached to the product serial number of the forum you are posting to.  I bet you that the posts would drop dramatically.

  • My Contacts, Calendars are NOT syncing on a Clean Install of Lion

    I did a Clean Install of Lion Yesterday and for some reason, my Contacts and Calendars are NOT syncing into my laptop.
    Am I missing a setting somewhere?

    I forgot to mention, the ODD thing, my bookmarks DID sync into Safari.

  • My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?

    I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project with the Creative Cloud again.
    Once I try to view the 2nd page in the Creative Cloud, it's still an exact copy of the 1st page. In other words, my changes on the 2nd page don't show up. I've tried synching the project many times and I get the same result. Tried opening the project from another browser, same result.
    My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
    Thank you.

    Yes, I'm 99% certain the project is being synced. If I duplicate more than the one page so that I end up with more than 2 pages, I still see every single page that I duplicated and made changes as the initial version of the page.
    I duplicated that 1st page again so that I have 3 pages. I made changes to the 3rd one and I'm still not seeing those changes when I look at the page in Creative Cloud. I see the new, 3rd page, so that should mean the project is being synced, correct?

  • Exception in Payment Proposal - Pmnt methods for this run are not specified

    Dear all,
    I want to ask if it is possible to run a payment proposal for AP transactions together with AR. The AR line items are used for clearing. Actually, this is the first time we execute proposal run which contains AP and AR respectively. And during the proposal, AR line item is an exception - 'Pmnt methods for this run are not specified in the master record or in item'. We already checked the master record, and there is a payment method. However, it was not captured during the payment proposal. Does it have something to do with the Document Type?
    Thank you once again for all your usual support.
    Regards,
    April

    To: Karthik, pushkaraj, JeCcas_DJ
    Thank you very much for your responses.
    I've checked already FBZP and Customer Master Record, payment methods were defined. Also, during the payment run, all line items have the same payment method, but only the AR transaction was not accepted.
    I think the problem is the same as what pushkaraj mentioned. We have payment method 'D' defined only for outgoing payments and not for incoming payments. I guess that is the problem.
    By the way, can I create another entry 'D' for payment method-incoming payments? Would there be conflict if I assigned same ID?
    Regards and thank you once again...
    April

Maybe you are looking for