Nike+ Site Down?

When I goto the Nike+ site today I get the red screen and nothing else but some garbled text at the top. Where it usually has stuff it just says "undefined". Is anyone else having this problem?

Yup, it's back up. And I have the same temporal disturbance problem as idiotdogbrain (can I say idb for short?). Did 3 little test runs done consecutively--posted as 12:33 AM, 4:48 PM, & 6:05 PM. None of which are the real hours at which I started, but hey, the minutes are right .

Similar Messages

  • When Working With Your iMac Do You: Stand Up or Sit Down?

    Hi. New studies show that it's better for health and creativity to stand up for hours while working (with legs moving from time to time) vs. sitting down or is sitting down with a very good chair better than standing up if you want to have a clear mind for thinking and you want to last longer using a stand up table? If you've tried standing up while working, how did it go?
    Gbu,
    Alvin
    Message was edited by: Alvin777
    Message was edited by: Alvin777

    Alvin777 wrote:
    If you've tried standing up while working, how did it go?
    hi Alvin,
    i used to stand while working with my MBP for over a year - sometimes standing up the whole day. i recently moved house and, due to restraints in my new place, i'm no longer able to do so.
    i'm still trying to get used to sitting now and found that my legs are cramping up frequently. that may be due to the fact that my body got used to me standing and is now adjusting, so only time will tell.
    from my experience, i'm inclined to agree with those studies and would encourage other users to try it.
    JGG

  • HT1498 Apple TV Rented Movies Very Slow to download, Like 2 hrs or more, was around 2-3 min to load and start the movie, Its NOT my provider? as other movies from other sites down load in a short time

    Hi Guys
    Over resent weeks the down load time for the Appel TV Gen 3 has gone very slow, To the point that you can not watch the movie as it does but buffer and you have to stop about every 15 mins. I have a fully cable internet at 100mps or more. Other Australian sites down load movies in 2-3 min at worst and often can stat and play thought in 1 min 30 secs.
    Apply TV was not like this in fast month to April, But May and June are Not Good

    Have you verified speed via speedtest.net ?
    Have you checked at different times?
    Check istumbler or netstumbler to verify interference
    Make sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

  • Why are the Graphics on Nike+ site almost all female, even for the guys?

    I was just wondering if I am doing something wrong. I signed up for NIKE+ and set all of my settings correct in MY ACCOUNT, made sure MALE was checked, but for some reason the only place where there is a male graphic is on the SET GOALS screen, but my goals are tracked by a woman running across the top of the screen. It doesn't bother me that much, but the user picture is only female as well and that does bother me. It sort of goes against the apple concept similar to iLife "Personalize Your Life" which apparently the NIKE+ site does not offer. I think apple might need to get in bed with nike a few more times a week and knock her up to get the point across that the consumer should have choice, and a lot of it.

    I heard back from Nike+ support and they said that there will be newer pics soon and it also appears that this corrected itself for my runs, but not the user pic, I only get girly options, I wouldn't mind a picture of a guy on 'ROIDS!!! Just kidding, but something less feminine or cartoon like, I'm trying to be serious about this and the site should reflect that.

  • X1 Carbon order checking site down?

    Hello,
    I am unable to check the status of my order.  Am I alone or is the site down?
    Thanks

    Puppy wrote:
    Isn't is similar issue to X220 https://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-display-frame-bends-in-sun-light/td-p/47... ? The frame bends in sun light.
    Thank you Puppy for pointing out this related post. (Un)fortunately, in my case, the gap between the frame and the display is not due to a mechanical bending (induced by the sunlight in the case of the X220), but instead to the use of a poor glue. 
    I did not even have to go outdoor, as the issue with my expensive X1 was there right after unpacking ... Btw, I still wait for feedbacks from the sellers, which in turn are waiting for directives from Lenovo. At the end of the chain, I am the one who spent money, waited >1 month for the delivery and is waiting again to have his purchased high-end product fixed.
    The fact is, after the first days of turning-back solution, the warranty does not cover for this kind of problems, which is the real worst side of the story, as it makes useless to have (paid) a 3 years on-site warranty.

  • Nike+ runs won't update to Nike+ site from itunes and won't show on itunes

    ok. I have read through many posts that have had similar issues but not quite the same.
    I have run and synced 18 workouts before this annoyance but all before i updated to itunes 9.2
    I have two workouts that I can see in my ipod nano. i go to sync and they do not go to the nike+ website.
    they will not show up in itunes on the Nike+ipod tab.
    so I went through terminal and moved the runs from the "synced" folder to the "latest" folder in the nano. I made sure I could see them in the nano nike+ app. they're there.
    so i go to sync through itunes. it says it's sending it to nike+ site. go to nike and they're not there. I look on the nike+ tab in itunes and it doesn't show it. It shows a 30 second test run that I deleted only. BUT, this is what stumps me, within the nano the 2 runs move from the "latest" folder to the "synced" folder. I'll go back into terminal and move the runs back and this viscous cycle repeats.
    all my old runs are still in the nano and on the nike+ site. is itunes effing up or is the nano?? I don't know.
    Here's a bit more about the 30 second test run i just mentioned. so, I thought maybe the .xml files (the runs) were messed up so I recorded a new one. 30 seconds long just to see what happens. I tried to sync it. shows up in itunes, says it sent it to the nike+ site. nope. not there. so I went into the nano and removed the test run through terminal. it's gone. i go through the nano and there is no 30 second test run. Whenever i plug in the nano now, itunes says my last run is the 30 second run that I have physically removed from the nano. huh?
    i ran with my iphone today and it's been no problem at all. ran and it synced no problem.
    maybe my nano is "corrupted" (whatever that means since it's working fine aside from this) and i have to reset it. i'm willing to do that if I can get all my runs (the .xml files) off the nano and put them back in. but i don't know how to pull files off the nano but will figure it out but wanted to see if anyone else gets this weirdness.
    please help

    For anybody having a similar problem here's the link to the update: http://support.apple.com/kb/DL1615

  • Download site down

    I am trying to download oracle 10g JDBC driver jar, but I am unable to. Is the download site down? All the lonks on the internet point to the same URL.

    Yes, we are having some problems today that should be worked out shortly. Thanks for your patience on this.

  • Nike site s l o w

    Seems the Nike site is so slow and unresponsive I feel like I am on a dial up. Never had this problem before. Why the change, traffic?

    The nike plus website i noticed after syncing my daily run tonigfght that its been updated with a few new loks adn features. id sday they had been busy updating alot of whats ont he website incliuding the widgets.
    the site is just fine now what is your internet connection speed?
    GFF:)

  • Several CWDM sites down after fiber fusing

    Hello.  We just fused some fiber on a CWDM ring, and several of the sites that were working before the fusing was done did not come back after the fusing was done.  I have tried doing shut/no shut on the core switch ports and the ports on the switches hooked to the core, but the ports do not come back up.  These were working fine before the fuse was done, nothing changed other than the fiber that was in building terminated at patch panels with patch cables was taken out of the lop by fusing the strands in the hand hold outside the building (the building is being torn down, so the fiber was no longer needed in the building)  5 of the other sites on the cwdm ring came back up, the 3 that did not come back up are the 3 farthest from the core switch, but they were working before the fusing.  At one of the sites I am reading -16 on the receive fiber at the sfp.  I have not rebooted the switches (3560 PoE) or the core switch (6509).
    Any help would be greatly appreciated.
    Thanks.
    Mike Baker

    I have not tried a loopback at the switch.  I assume I would just jumper across on the mux/dmx box on the port that is feeding the sfp, loop transmit to receive?
    The distance varies, the entire fiber ring is 43 miles, the sites involved are probably 2 to 4 miles max from the site where the fusing was done.
    I did realize that the site that had the fusing done was a place where we changed 1 fiber in the pair that rides a specific "ring", it entered that site on one fiber and left for the next site on another, so in the fusing we lost that flip.  I corrected that this morning, but still have the 4 sites down on that specific ring, so still don't know what is wrong.
    I will try to do the loop back and check the status of the port on the core switch and see if it comes up with the loopback on. I even tried reloading one of the 3560 switches this evening gafter everybody went home, still no link on that port.
    Thanks.
    Mike Baker

  • HP Color LaserJet M750 Firmware download site down?

    Hi,
      Trying to download a firmware update for a Lasjet M750, but the site says:
    "Could not open page
    The service or information you requested is not available at this time.
    Please try again later.
    (Error: system-applsrv_unavail) "
    Is the site down?  I was trying yesterday too and it wouldnt even load.  Whats going on??
    This question was solved.
    View Solution.

    Nevermind, site is back up finally!

  • Since reformatting my nano, info not going to nike+ site

    Due to problems i was having with my nano, I restored to my original settings and updated the nano software. Since doing so I am aksed to create a Nike+ account each time. None of my new runs, since doing this, are going to the Nike+ site.
    Any ideas?

    I have the exact same problem!! 
    I have 56 runs stored on my Nano 6 (touch screen) and they wont sync with the Nike + website.  I've tried everything.  I even created a new Nike+ account thinking it would send them all, but it only sent the newest one.  I'm super frustrated and i dont know what to do.
    Anyone else have thoughts?

  • Is blackberry id site down??

    Did a security wipe so I could restore PB since this last upgrade killed my batt life but now cannot log in to Blackberry id either on PB or computer.
    Is site down?

    Pls change ur BBID password , do not use too complicated combination . Once u've done OOBE , then u can change the password as u like .
    kind-hearted Pb specilist .
    PLS give me a kudo if I help u with issue U r encoutering~!
    Any questions, feel free to let me know.

  • Nike/plus site down???

    I have been unable to pull up the Nike website for the last two days. Is anyone else having this problem?

    Hi,
    It's working for me. Maybe it's a problem with your iTunes link or browser. Open a new browser window, go to Google and search for Nike Plus - then click the official Nike link and see if it works.
    Good luck!
    Edd

  • Windowsize on Nike+ site-never had problems b4

    Now I am unable to scroll to the top of the home page where the login/logout icon is located. Even if I relocate my dock to the side and pull the window down, stuff is still cutoff. Then at least I can login but again can't logout for reason above. It's like content at the top of the page is stuck under my bookmarks bar but I did NOT change any setting anywhere nor do other websites seem to be affected. It's this way in both safari and firefox. Is there a setting somewhere I can double check to make this work for me again? PLEASE help me anyone! Thanks!

    Sure, thx. Here is the site. http://nikeplus.nike.com/nikeplus/?sitesrc=uslanding When I check other sites for comparison and play w/resizing the window, I notice the content stays put in place but on this one as I try resize, the content on the page moves with the window as if it's anchored within it, thus whatever size I make the window, I can pretty much only access page content I see in the window as opposed to what I can half way see or know is off the top of the window. Hope that makes sense! This is driving me crazy as I'm sure it's something simple or stupid on my part. Or is it possible it's just their site for some odd reason? Thanks again for your help!

  • Cant install new kdemod...Site down??

    Ok, trying to get kde mod setup for the first time without any other x-windows installed yet. each time it tires to update using packman, it says connection timeout .
    error: failed to update custom (unexpected error) error: failed retrieving file 'kdemod-core.db.tar.gz' from kdemod.iskrembilen.com : connection timed out
    Core, extra, testing, are sync'd and up to date. All other packages have updated and installed fine. When i use another pc and try to go to their site listed in the script: Server = http://kdemod.iskrembilen.com/repo/core/i686 it also seems down?
    Is anyone else able to get to this site right now? Would this be the only reason why its not working, and is there an alternate server location i can use instead?
    I wanted to try out kdemod4 but i might need to try openbox if i cant get kdemod to work....
    Thanks
    /etc/packman.conf :
    [community]
    Include = /etc/packman.d/mirrorlist
    # "I put this next line in for kde just to see if it would help"
    Server = http://kdemod.iskrembilen.com/repo/core/i686
    [custom]
    [kdemod-core]
    Server = http://kdemod.iskrembilen.com/repo/core/i686
    [kdemod-extragear]
    Server = http://kdemod.iskrembilen.com/repo/extragear/i686

    Sadly it seems down again...
    Sandsmark prolly messed up once again
    Try another mirro while iskrembilen is down. (it will be back up sooner or later)
    http://kdemod.ath.cx/get-step2.html (mirrorlist)

Maybe you are looking for