Nike+ Stopping and starting with headphones with volume control
I have new headphones, the apple ones that you can control the volume and stop start and skip to the next song. About two weeks after using them on runs, the program starts hesitating (stopping workout switching songs at random). I have returned headphones to Apple Store and recieved new ones with the same result about two weeks later. Please help, it is a big inconvience.
Has anyone found a solution for this? I've gone through two news sets of Apple headphones (with mic and volume control), and I'm still having this problem. It isn't continuous, and I can't seem to find a cause/effect relationship. But, it is very annoying, and makes using Nike+ worthless. Yesterday's 40 minute run only recorded as 33 minutes. Thanks for any help.
Jeff
Similar Messages
-
Stopping and starting database in 10G OEM
Hello, has anyone run into an issue trying to stop and then start a database within the OEM console in 10G? We are able to stop and start the db with sql and windows services. We can stop the db in OEM but can't start it.
When you come to the startup/shutdown:confirmation page before actually starting up the db, does the Operation parameter say "startup database in open mode" or is it "... in mount mode"?
-
Sound randomly stops and starts
Hello,
Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts. I have no control of it. I do not have to touch my ipod when this happens, it does this on its own. On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min. It ossolates randomly through time.
I hard reboot, but this works or does not work (for a while). Any ideas?Hello,
Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts. I have no control of it. I do not have to touch my ipod when this happens, it does this on its own. On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min. It ossolates randomly through time.
I hard reboot, but this works or does not work (for a while). Any ideas? -
My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?
Do you have current backups?
Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
Your appointment for an evaluation is FREE, in warranty or out. -
While playing videos on itunes, the audio and video will stop and start several times during playback. This just started recently and it does it on all my videos. Help!!
Try to download the application VLC.
It is a media player that should be able to play any audio or video file you may have. If your videos play flawlessly using that application, then the issue is with iTunes and Quicktime, as they are both essentially similar software types when it comes to playing media.
In that case you may need to install a plug-in file called Perian, in order for the videos to play correctly within iTunes or at least Quicktime... -
I bought a TV episode from iTunes (I have version 10 installed), but when I try to play it on my laptop, it keeps stopping and starting, with the voices out of sync with the action. The action is stop/start as well., and occasionally it skips 5 or 10 seconds altogether, making it impossible to watch. What settings can I change to fix the problem.
Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime and click CHANGE then REPAIR. -
Videos on Tenplay keep stopping and starting with wi-fi. Is there a fix??
Videos/episodes on Tenplay keep stopping and starting with wi-fi. Is there a fix??
Are you saying to use an ethernet cable and plug Apple TV into an ethernet port on the router??
The router is in the study room and the Apple TV is in the lounge room, it is not far away but can't reach. How am I supposed to connect an ethernet cable it is too short and can not reach the router?? -
Hey guys I hope u can help me out, my new 3 months old 16g iPhone 5 has problem
The sound don't work at all except for with headphones, the volume says ringer.
I've tried restarting my device, reset my settings I even tried using a Q-tip in the headphone jack.
Please help me out.
And btw yesterday it worked for like 10 minutes and then got back to no sound.
And this silent mode isn't on.it's a hardware issue
https://www.google.dk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CC4Q FjAA&url=https%3A%2F%2Fdiscussions.apple.com%2Fthread%2F1343532%3Fstart%3D315%26 tstart%3D0&ei=Wy1hUYiWDs3Y4QSzqIHAAw&usg=AFQjCNHLi5JBEWvjM6SHBge36Or-m1YMEw&sig2 =-By7BjriUmZPDpHDnY_ySw&bvm=bv.44770516,d.bGE
more hits from the search
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest -
Sound stops and starts with x-fi titanium pci e
I am going nuts with this problem and creative support is not much help atm, so I have been troubleshooting myself. Whats going on is my sound stops, starts, and stutters a lot. It is pretty bad when I play music files but it is absolutely horrible when I watch videos like on CNN or YOU TUBE. It is like a old vinyl record skipping, except when this gets off a stutter, it races to where it should be on the time line. Also my creative console does not work right. I cannot use the equalizer, as the custom, rock, pop music select is greyed out and the box is checked to use the equlaizer. It also disappears when I click on a few tabs, like between speakers, bass, equalizer..then its just gone and I have to click the shortcut again to get it back.
What I have done so far is un-install everything, and do a clean boot, then re-install and I have the same problems. Though I downloaded the creative console beta(2.6.49) and it seemed to have fixed my issues with that. But downloading the new drivers (2.7.8) does not fix the stopping and starting.
Any suggestions?
I should mention I use klipsitch speakers..2.1, I don't have surround sound anymore.
Customer service had me run a registry cleaner and use it to uninstall everything creative. I used CCleaner, then used direct links to download drivers...again...(2.7.8) and a creative console(2.6.35)..guess what? It didn't work, same problems, though I downloaded and re-installed the beta for the creative console(2.6.49) and now it works fine. I also did all this under a clean boot..again.Check if "Play Stereo Mix using Digital Output" is checked in the Console launcher in Settings/Digital IO.
-
Has anyone else experienced the stopping and starting again whil playing music in itunes. It was working fine wit the prior fix, but after the last update
it started skipping again.Try it in another vehicle see if it still happens, at least you can narrow it down to your phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!
-
Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open
Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open
-
I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?
It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility. -
I just upgraded to iOS7 and started using icloud with Outlook 2010. I dealt with switching over to only using icloud for my calendar, but now my calendar reminders are only randomly popping up which is very frustrating. They show up on my phone however. And under my calendar on my main page it doesn't show any appointments coming up. Any suggestions on a fix?
Hey Csound1,
Looks like we found a solution, it's Mickey Mouse but it works. After talking to two Apple Senior Advisors, this is the fix they came up with:
The first advisor after exploring it for awhile, came to the conclusion the way to get my calendars back local On my Mac with the alerts as I had then was to import the saved .ics files with my my 'dangerous email alerts' being removed then me manually re-adding them. I said that was a no go.
The second advisor, after speaking with me for awhile and trying a few things that we'd tried before said he'd do some work on his end and call me back. A couple of hours later he phoned back with a fix that I guess will have to do, his solution:
I had to go into Calendar-preferencs-accounts and create a Gmail calendar, quit and restart Calendar, I created a calendar in the gMail account. Then I was given the option in Calendar under File-New Calendar to create On my Mac local calendars. Next was to create local calendars with the same names as my iCloud calendars. Now I had to un-check all calendars but one, put Calendar in month view, command-click all the events for the given calendar and drag them to the new local calendar of the same name. I then had to repeat this for each of the calendars and for all 12 months of the year.
I'm not done yet but it seems to be working. As I said Mickey Mouse but doing the job. It seems creating another online calendar account was the only way to get the local On my Mac option, active again. What a pain in the a** this has been, I will repeat it again
iCloud is EVIL. -
I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process over again.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then repair the backup/TM drive. -
APEX 4.2 aligning issue of Stop and Start Grid Layout item
My APEX application application is in the process of moving from 4.0 to 4.2. I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them. Earlier I had an issue with the border itself not showing up in the 4.2 application. I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line. I have tried a number of different things but none of them have worked. This seems like a very simple issue to fix but I am having a tough time resolving it.
I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item. It seems that the above CSS code does not work on the new grid. I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
Any suggestions?
Thanks
Ajay KI deleted and added back the Stop and Start Grid Layout items not aligning properly. This worked. Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly. Deleting and adding them back resolved the issue.
Maybe you are looking for
-
"Random" play doesn't work,stops after each song; multiple plays of same
One of the more annoying things happening: random doesn't work. I've gone through the Zen Media Explorer, reformated the Zen player, so there were no songs on it. Went and built a list of 37 songs and uploaded via Zen Media Player to the Zen player.
-
How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?
-
Report Painter - Report group doesnot exist
Hello Expert I have done the development of new report and report groups through report painter. I did the assignment of report to report group, Also i could able to access the report through T.Code GR53 / GR55 codes. I have done the Generate report
-
hi all, i am trying to do a soap to rfc scenario. in the soap client...i am getting the following error: "requires authentication with the realm 'XISOAPApps' " what is to be done? Regards, Archana
-
Guide to write own TMF analysis module.
Hi, I was collecting lttng trance point in my system to debug performance. But now I see eclipse don't help me much to visualise traces. So I want to write my own analysier which will analyse data and presnt in histogram. I went trhough TMF developer