Nike stops recording and sensor not reading during run

Hello,
My receiver has been acting up as described. It will record up to a point and then "workout completed" will announce, with the miles already run. I have read in other posts here that it might have to do with sweat on the receiver. Maybe also with humidity, since it's been very hot and humid here in New York lately. Any suggestions?
Also, I have tried to set up an old iPhone 3G for the receiver, but when I plug it in, it says the iPhone already has a receiver, but I can't find it!
Thanks,
Joel

I haven't been actively looking for an answer since I first posted. I also haven't had a chance to go back to Verizon to try to get a new phone.
For now, I basically have to wipe the button down (pretty forcefully) after every few uses. I'm not sure if my thumb gets too oily/dirty/whatever because I do notice an imprint of my fingerprint on the button after a few uses and that's when it seems to start failing.
My fiance also has a 5S and she has not experienced this issue at all. I was hopeful that it was the phone but since the problem came back for you maybe it has something to do with our fingers? When I have a chance, I'll try to get my phone replaced to see if that fixes it but I don't have a good feeling about that.

Similar Messages

Ever since the most recent firefox update, every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it?

Every time I try to download anything firefox stops responding and will not do anything until I restart it. Can I revert back to a previous version, or is there a fix for it? When I restart firefox, then the download continues and all is well until I try to download something new (which I do quite often).

You may well find this article of interest and help in sorting out your problems: [[Installing a previous version of Firefox]] The article does contain a link for previous versions, but also points out other troubleshooting advice that may be more appropriate in some instances.
Another useful article is [[Basic Troubleshooting]]
I hope you sort out your problems either by downgrading or finding the cause of the problem.

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore. I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

Hey dbwithers,
Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

My new iPhone randomly just stopped working and will not turn on what should i do?

My new iPhone randomly just stopped working and will not turn on what should i do?

thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

Have you contacted Microsoft support - http://www.microsoft.com/mac/support ?

My one day old nano 6 has stopped working and will not restart can you help?

my one day old nano 6 has stopped working and will not restart can you help?

try this........ http://www.apple.com/support/ipodnano/assistant/itunes/

I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing incase an answer is contested. We will need to stop recording and access the footage as the day progresses. Any suggestions?

I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
Many thanks!

I'm moderating a competition which will be about 8 hours long. I need to have a video/audio recording of the whole thing in case an answer is contested.
We will need to stop recording and access the footage as the day progresses. Any suggestions as to how best to accomplish this? I have an iPad and a Macbook Air.
Many thanks!

When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?

When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?
A few weeks ago, my camera doesn't do that, but since 1-2 weeks it becomes impossible to record with it.

Hi mstearns59,
If you are having issues with the audio in a movie in iTunes and video playback issues I would suggest that you troubleshoot using the steps in this article -
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
Thanks for using Apple Support Communities.
Best,
Brett L

Airplay stopped working and will not restart?

A new airplay stopped working and will not restart - it is not recognized in the airport utility - yellow light flashing

Thank you and yes it is an Airport Express.
Reset router; could not locate the unit using the Airport Utility.....took back for an exchange under warranty as it was only a week old....no problems at store - exchanged for a new one

My iTunes movie has stopped downloading and will not resume. Message says unable to download. All attempts to retry result in the same message.

My iTunes movie stopped downloading and will not resume. Any thoughts

 iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If it's a purchased movie, then just redownload it from the cloud (if not a rental)
 Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519

HT201209 I got a gift card from the apple store and is not reading in the App Store what should I do?

I got a gift card from the apple store and is not reading in the App Store what should I do?

What does "not reading in the App Store " mean?

HT201269 if my iphone is crushed and will not read onto itunes/sync, is there anyway to access the data and back it up?

if my iphone is crushed(droped and ran over...) and will not read onto itunes/sync, is there anyway to access the data and back it? i really dont want to lose the progress in the apps that i play often....

i wasnt expecting to acompish it... just wondering if there was another method, and was trying to have a little hope but thank you

HT4796 Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

70 hours... no, it's not normal but it can't hurt your Mac to be running for that amount of time.
Try this support article > OS X Mavericks: Transfer your info from a PC

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Nike stops recording and sensor not reading during run

Similar Messages

Maybe you are looking for