Nike watch problem on imac

My Nike watch is downloading runs when plugged in but not opening up the nike running website? Any ideas? I'm a new IMac user so may be doing something wrong!

There are several threads like this to the right under "More Like This" with similar titles so take a look there.

Similar Messages

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

Problems with iMac retina 5K (artifacts, glitches and etc.)

Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...

Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward.

Using the Nike+ Watch amp remote to control iTouch 3G

Has anyone found a way to control (volume up and down and track changing) the itouch using the remote amp watch outside of running the nike+ application ?
I can do this with a sensor attached on the nano - on the itouch it seems that the remote will only work when the nike+ application is running (and only when its connected to a shoe sensor)
P.S. The batteries for the nike watch seems to be difficult to get in the uk also ?

On my iPod Touch 2G I can only control music with the watch remote while in a workout.
Batteries are easy to come by here in Oz, which is good as they sell these units with dead batteries.

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

HT204370 I had purchased a movie on my ipad while on a business trip and now I'm home on my IMac and wish to watch the movie I didn't finish on my iPad. How can I continue to watch on my IMac if I purchased and started on my iPad ?

I had purchased a movie on my ipad while on a business trip and now I'm home on my IMac and wish to watch the movie I didn't finish on my iPad. How can I continue to watch on my IMac if I purchased and started on my iPad ?

Open itunes, connect ipad, click File>Devices>Transfer Purchases

HT3964 1st problem was IMac running slow. Shut down and unplugged several times with each time reboot being worse. Now, unplug reboot and eventually wallpaper background comes up but there are no icons?

1st problem was IMac running slow. Shut down and unplugged several times with no correction. Eventually, shut down, unplug and reboot resulted in wallpaper background eventually coming on screen but no icons. Nothing after that.

Kurt, do you know which exact iMac this is?
Have you blown the dust out lately?
Does it do better if allowed to cool off for a couple of hours?
What do you see if you hold Option or alt key at bootup?
Does it boot from the install disc holding c key at bootup?

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

Hi,
I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
I tried these things:
- Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
- Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
- SMC, PRAM reset on both devices
The cable works, because:
17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
Retriggering CMD+F2 or replugging breaks it again with massive bugs.
The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
The 6770M of the 17" is working well.
Sample Video:
http://www.youtube.com/watch?v=W_pgc52syes
All updates/firmware updates of iMac and MacBook Pro are installed.
Any solutions?
Greets,
Kai

Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness. I suggest that you post your thoughts here:
https://www.apple.com/feedback/

Graphics problem on iMac G5 w/ iSight.

I just tried installing a 1GB RAM stick in a 17" iMac G5 (iSight). The machine has 512MB of RAM (the standard), and a 1.9Ghz processor. It is running Mac OS X 10.5.7.
My friend, who owns the iMac told me she'd been seeing some weird graphics artefacts and had been having several lock-ups on the computer which required a forced restart to fix. I didn't know what to make of this and said I'd check it out when I went to install the RAM for them.
The problem alarmed me - rather than a few stray black lines that I had been told about, I found all of the following issues.
1. Black / White or Transparent lines on windows and toolbars. These were particularly predominant on menus and other semi-transparent parts of the screen, but also occurred on solid windows - such as Safari.
2. Blank screen - the screen would just go blank after a few moments.
3. Screen freezes - everything on screen would stop other than the arrow. Sometimes this would stick as an arrow, or sometimes as a beachball.
4. A really strange phenomena when I opened a browser page and suddenly the left of the screen slowly faded to black, while the right went white. This went in increments as I watched with the image of the desktop distorted behind it, burning out.
To try to fix the problem I took the following steps:
1. Reinstalled Mac OS X 10.5.7 Combo Update. This had no effect.
2. Repaired permissions. (I didn't expect that to help anyway)
3. Tried booting into a second user account on the computer (again, all the same problems were there - even worse on the other account in fact.
4. Unplugged all peripherals (no effect)
5. Removed the 1GB memory stick I had just installed - this appeared to fix the issue and I thought that maybe this was causing it. However, after a few minutes of normal operations, the problems all came back.
Just to clarify - the problems apparently started a week or so ago (this might coincide with the owner installing Mac OS X 10.5.7, but I can't be sure), at this point the computer only had its built-in 512MB RAM. With the additional 1GB RAM that I installed, the problems seemed to be worse. I know there is nothing wrong with the RAM as I had been using it in my iMac G5 up until this point.
I initially suspected the problem was the graphics drivers - as the problem occurred after upgrading to OS X 10.5.7, though I wondered if the problem could be the GPU itself?
However, I am now wondering if it's a RAM issue as additional RAM makes the problem worse - would having more in the computer change the way that the internal RAM is being accessed and mean that the end addresses of the built-in RAM are being accessed more quickly when additional memory is installed?
I was unable to find out if the machine would work alright if booting from the Leopard or original install Tiger DVD - as I didn't have time to check these.
Please advise me what I can do to diagnose the problem further, or what the owner can do to fix the problem.

"I will have to dig out my copy of Leopard or the original installer for my iMac G5 (w/iSight) as the owner doesn't know where her copies have gone! Maybe trying these will help find a solution"
You cannot use the System DVD/CDs from one Mac to another. The System discs are _+machine specific.+_ You may cause further damage if you use it.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
However, you can try using a purchased retailed Leopard DVD.
=================
Try the following:
Mac OS X 10.4 Help-My Dispay Doesn’t Look Right
If the above is of no help then you will need to do the following:
System Preferences>Display>Display
Check the Colors & Brightness settings.
My Color setting is set to Millions which I believe is the default setting.
Now click on the Color button.
Check Display Profile
Is Show profiles for this display only enabled or disabled?
If necessary click on the Calibrate button & do the necessary.
Now in the bottom right corner, click on the purple button w/the black ? mark in the middle. This will bring up the help window.
Midway down, click on the Colorsync Utility link.
The next window should be Profile First Aid.
Read & follow the instructions/details of About Profile First Aid: & do the necessary to Verify & Repair.
If the culprit is the video card, you will need to take the computer to the nearest AASP or Apple Store for repairs.

Hardware problem? iMac 20" Alu

Hi,
I've had my 20" Aluminium iMac for about two years now, and every thing has been great with it up to about July. It has started to crash every 15mins or so, and I seem to be forever sat watching the beachball of death. I have done a hardware check which came back absolutely fine. I have also run permissions checks which have come back fine as well. I've reset the SMC but to no avail. itunes is pretty much unusable on the machine now, as it just clogs the whole thing up. Things that it used to be able to handle will just grind the thing to a halt. When the machine completely freezes up I reset using the power button, but it won't turn on immediatly, I have to wait about half an hour and try turning it on again, by which time it comes on within 30 seconds. This is why I have a feeling it could be something hardware based, as opposed to software, even though the tests have come back fine. The machine has 2GB of memory and the 250GB HD is well over half empty, so surely it is not a memory problem?!
Any ideas on how to sort this out would be great!
Thanks in advance.

The Hardware Test may be missing an error on only one run through. I'd run it a few times again in Extended. Not always very meaningful, but does Disk Utility show the drive is Verified? You can trust it if it says not verified, but not necessarily if it reports verified.
You could check out the drive with SMART Utility (demo.) Probably run the long test.
http://www.volitans-software.com/smart_utility.php

IPhone 3GS and Nike+ Remote problems

I've been using my Nike+ Sensor and Nike+ Remote watch with the iPhone 3GS and have noted problem. (I also have an 4th Gen Nano which works flawlessly with this kit)
The fast forward and reverse buttons work to "skip" to the next song or podcast, but have lost the functionality to hold them down a FF through the song or podcast.
Anyone else have these problems?

The spoken feedback problem must be a bug. It happens to me sometimes and it can be fixed by either turning the phone off and back on or resetting it.

M2tv -- questions about watching tv on iMac

Firstly, I'm sorry if this is the wrong forum. I looked and this seems closest to my question.
I'm an American in Japan and reading Japanese is still a bit difficult. I wanted to watch TV with my iMac and so this past weekend I bought m2TV which is an external USB device that plugs into my TV antenna, no antenna, no TV. Reception is pretty good but sometimes I can't get all channels and I'm thinking there must be another way.
I was wondering if I bought a tuner in/from America, if that tuner would work in Japan and what tuners people recommend.
Cheers,

the iMac doesn't have an HDMI port per se, but there are MDP-to-HDMI adapters.
what might be the problem with that digirecorder is the lack of a Mac driver, though.
instead, check out [Elgato's|http://www.elgato.com/elgato/int/mainmenu/products/tuner.en.html] hard and software.
JGG

Nike watch problem on imac

Similar Messages

Maybe you are looking for