Nike + wont connect to Macbook pro

I recently updated my macbook pro to the mountain lion and when I connected my nike fuel band; the nike connect shows in the dock and disappears. I have uninstalled and have gone  thru all of the trouble shooting with Nike. We tried to connect on an older version (e.g. lion) of mac (using another computer) and it worked. However, after updating that macbook it no longer recognized it as well.

I think the only reason you would require a Bluetooth connection between an iPhone and MacBook Pro is to tether the phone to the laptop. And tethering isn't allowed with the iPhone on the AT&T network, so this is kind of irrelevant.
And I don't think Apple is to blame, so the OP is way off base on this one.

Similar Messages

  • DLink router wont connect with MacBook Pro

    Hello Everyone... I need a little bit of help on this one!!
    My mom just bought a brand new MacBook Pro (yay, she finally switched!) , but for some reason I can not get her MBP to connect to their wireless. The Airport card will no even find the network to connect to. There is not a password set and asking my parents they are not sure if there was a cd or anything to set it up. They have a DLink router that is several years old (DI-624 is the model #) and I have been scratching my brain to figure this out and can not get it!! There are several posts that give suggestions, but none seem relevant to my problem.
    Any help would be awesome and thank you sooo much for your help!!

    assuming your mum's previous computer was/still is able to connect to the DLink, it probably means that SSID Broadcast in the wifi settings (of the DLInk) has been turned off. which means nothing can 'see' the DLink that hasn't connected to it previously.
    you'll need to temporarily plug the MBP into the DLink via a Cat5 Ethernet cable, log into the DLink's config website (probably http://192.168.0.1 or http://192.168.1.1), and check the wifi settings. no install CD required
    u said no 'password' had been set. do you mean no wifi encryption had been configured? you'd be well advised to if there's anyone living within 100m of your Mum . while you're at it, see what encryption settings have been set up there / are available. if it's WEP (or no encryption at all as you suggest?), you'd be well advised to change it to WPA. WEP is now hopelessly broken (easily crackable within a minute with the right tools). just be aware that any change here will affect any other wireless device that's also using the DLink.
    if WPA is not offered, goto the DLink website and check for new firmware...

  • Wireless keyboard wont connect to Macbook Pro...

    Hello everyone, I've found myself in a little bit of a situation today. I have an early 2011 Macbook Pro, the keyboard does not work due to water damage, and i've been using a wireless keyboard for a while now. I had to restart my laptop for an update and when the laptop turned on the wireless keyboard would not connect to the bluetooth, which now means I can no longer sign in my account.
    is there a way i can fix this problem?

    Iphone/ipad supportes bluetooth for stereo speakers/headsets, handsfree telephone devices/headsets, some keyboards, some peer to peer apps, and internet tethering if provided by the carrier.
    Otehr than these it will not connect to a phone/computer/device

  • Internet wont connect on macbook pro

    Laptop wont connect to internet even though wireless modem network settings and menu bar shows connected OK. It worked perfectly 3 months ago but I havent used the laptop since.

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • IMessage wont connect on Macbook Pro

    Need help! I am trying to set up iMessage on my Macbook Pro - i enter the correct Apple ID & Password and it comes up with a error message 'Could not sign in, Please check network settings & try again'
    Help Please!!
    Thanks

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

    How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

  • How to connect my macbook pro to LDC television

    I have a macbook pro 13-inch, mid 2012 model.
    I have an LCD television of 32 inch from panasonic (TH-L32C8K).
    My TV does not have hdmi port but have vga and AV ports.
    To connect to Macbook I bought an thunderbolt to hdmi cable. Then I bought an hdmi to vga cable. So my final arrangement is like this
    Macbook<-->thunderbolt-to-hdmi-cable<-->hdmi-to-vga-cable<-->Television
    On the television i changed to AV mode to PC. But nothing is shown on the tv screen. My TV works with other thing. When i connect the macbook pro, it does not show anything. Can you guys suggest whats going wrong? Before buying this macbook, i was like dreaming about it. But now life became so hard using the mac. Everything is pricy and not compatible to outside world devices.

    surjya1 wrote:
    Macbook<-->thunderbolt-to-hdmi-cable<-->hdmi-to-vga-cable<-->Television
    That's a complete mess and I am not suprised that it is not working.
    Instead of getting two adapters, you could just get a Mini DisplayPort to VGA adapter and a simple VGA cable, so you can be sure it will work. Maybe you should have looked for more information before purchasing anything.

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • How to connect my macbook pro to an older tv that has rca cable?

    How to connect my macbook pro to an older tv thas has rca cables?

    The yellow RCA jack is called "NTSC Analog Composite Video", or "Video" for short. You need an adapter to "Video".
    Exactly which MacBook Pro (or which output Display Port) do you have?

  • How to connect my macbook pro to my apple tv to watch a DVD on my television?

    How do I use appleTV to connect my Macbook Pro to my big television? I want to watch a DVD on my television... But don't have a DVD player...
    Can I connect my computer to display on my televison!

    You can use a HDMI cable.  The adapter you need depends on the age of your MacBook Pro.

  • How to connect my macbook pro to my car cd player

    hello how to connect my macbook pro to my car cd player

    If the CD player has audio line outputs, you could tap the audio input port of your MBP.  I do question the practicality of doing so.
    Ciao.

  • How to connect my macbook pro to a computer-to-computer network?

    how to connect my macbook pro to a computer-to-computer network?  My home computer is a Window 8 OS.  Thx.

    The easiest way, and it may work from scratch, is to share the folders/drives you want access to on your pc, noticing what are the default parameters (eg "workgroup" etc.).
    Then, you can connect your mac directly by ethernet, for instance, and, in Finder, go to > Network, you should see the folders/drives. You may be asked to provide user/password.
    Don't get confused by regular/crossed ethernet cable, as mac can cross by software, so a regular cable will be ok.
    Anyway, either you isd modem has the ability to connect several devices (multiple ethernet sockets, or wifi), or you can buy a router, which isn't expansive.

  • Can´t connect my macbook pro to apple tv

    I can´t get my MacBook pro to connect apple tv.How to do?

    Hey Jonas!
    Depending on how you want to connect your computer to your Apple TV, I have a couple of articles for you that can help answer your question. First, if you have OS X Mountain Lion on your MacBook Pro, this article about AirPlay Mirroring will help you understand some of the options available to you with that feature, and at the bottom of the page is a link to instructions for setting up AirPlay Mirroring:
    About AirPlay Mirroring in OS X Mountain Lion
    http://support.apple.com/kb/ht5404
    You can also have your iTunes Library connect to your Apple TV through a feature called Home Sharing, more information on which can be found here:
    Understanding Home Sharing
    http://support.apple.com/kb/ht3819
    Hope that helps you understand some of the options available to you for connecting your MacBook Pro to the Apple TV. Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • How can I connect My MacBook Pro to Apple TV?

    I am trying to connect my MacBook Pro to Apple TV but without success. Any ideas?

    How old is your MBP (year and season)?
     > About This Mac > More Info...
    Apple TV is supported on a early 2011 or newer MacBook Pros with OS X Lion v10.7.5 or later.  If your MBP is older than that then you can use AirParot to connect to Apple TV.

  • How can connect my Macbook Pro to a TV Monitor ?

    How can i connect my MacBook Pro to a TV monitor other way than 15 pin cable ?

    I would check out Monoprice. I bought this cable for my late 2011 MBP - it attaches to a Thunderbolt or Mini DisplayPort and then out to HDMI. It's just a small adapter - under $7 - and worked quite well for me. You'll have to get a HDMI cable of your desired length to work with it. I also suggest using Monoprice for HDMI cables - they've excellent quality and low prices.
    Clinton

Maybe you are looking for

  • Error in Refresh Collection Snapshot request in R12

    Hi, On running Refresh Collection Snapshot (standalone request) in Oracle R12 with the settings as Refresh Mode: FAST, Snapshot Name:ALL SNAPSHOTS and the rest as the default options; it completes with the following error: MSRFWOR module: Refresh Col

  • Home Sharing issue with multiple iTunes libraries

    I'm hoping someone out there has a suggestion to help solve the problem I'm having with the new iOS 4.3 Home Sharing. I have an iMac and a MacBook Pro both running the latest system and iTunes versions. Each has an iTunes library with Home Sharing tu

  • I would like to see flagged emails on my iPhone

    I flag emails on my Macbook Pro in various folders but I can not see them on my iphone.  Is there a way to have flagged folders appear on the iPhone please?

  • How to Change Column header in ALV List

    hello, is there a way to change the column header/label of an ALV list other than inheriting it from the source table it is bound to? thanks, sid

  • No messsage in SXMB_MONI, although file has been picked up in file to idoc

    Hi, i m working on a file to idoc scenario using MATMAS.MATMAS02, once i got the scenario executed with error status 51 , "Messages have been issued: number 0000000000198012" the datas to be posted were MATNR ,MAKTX,MBRSH , etc , in this MATNR is sel