Nikon D 200 + Camera Raw
Hallo zusammen,
wann wird denn voraussichtlich die neue Nikon D 200 von Adobe Camera Raw unterstützt? Die D 200 soll ja um den 15.12.05 verfügbar sein - die Frage ist nur wann es das Update gibt um die Raw Files auszulesen. In der Beta Version 3.3 (http://www.adobe.com/products/photoshop/cameraraw.html)
ist die D 200 ja noch nicht zu finden...
Volker
You can get Camera Raw 7.4 by upgrading to Photoshop CS6. It's that simple. The last version of Camera Raw for Photoshop CS5 is version 6.7. You could download the DNG converter version 7.4 and create digital negative copies of your NEF files. Those DNG files will have all of the original raw data in them and you will be able to open those files with Photoshop CS5. But if you are using Lightroom, it has all of the same adjustments that are in Camera Raw. Lightroom will create a TIF or PSD file that contains all of your Lightroom adjustments, and send that file to Photoshop. It's what a lot of people do when they don't have current versions of both Photoshop and Lightroom. It's what I will be doing when Photoshop CS7 is finally released and I can't get any more Camera Raw updates.
Similar Messages
-
D750 Nikon are the camera raw or DNG file ready to work in the Raw format in Lightroom?
D750 Nikon are the camera raw or DNG file ready to work in the Raw format in Lightroom?
Crazy idea - do a site search for "D750"...
-
I don't get a photo preview in bridge of my raw files, just the NEF file thing. Then when I click to open them I get a message that says: "If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates" "If the problem persists, visit the following link for more information: http://www.adobe.com/go/kb407111". I can't seem to figure out what to do! Help Please!?
Usually the problem with a newer Nikon camera is that the NEF files have been transferred or viewed with obsolete Nikon software, like Nikon Transfer for View NX, and those change something in the header of the raw file that makes it unrecognizable to Adobe products.
For new images, the solution is to either stop using Nikon products to transfer and view your files or update your Nikon products to be as new as your camera.
There is a utility to fix this particular corruption here:
Fix Corrupted Nikon NEF Images -
I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?
Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler -
My new Nikon D7000 RAW shots dont open in CS3 with Camera RAW 4.6. Sigh! What do I need to do?
Pick one of the following options:
Option 1: Use the Latest Free DNG converter.
Have All Your Current Capabilities, But With An Extra Step for You To Perform.
You can download the latest Adobe DNG converter, which knows about the raw files your new camera produces and can convert them to DNG files your older version of Photoshop can open via the Camera Raw plug-in. This is not as integrated an approach as using all new software to go with your all-new camera, but it DOES make it possible for you to use your brand new camera in Raw mode and get exactly the same functionality out of your old Photoshop that you always did.
You would download and install the very latest version of the DNG Converter (6.4 at the moment) then whenever you want to edit raw images you'll go through a process something like this:
1. Upload the raw .NEF files from your camera into a folder on your hard drive.
2. Run the DNG Converter application and select the folder (it works on folders, not files).
3. Convert all the .NEF files to .DNG files.
4. Open the .DNG files into your current version of Photoshop through its Camera Raw dialog, which understands the DIgital Negative format.
Read How to Download Adobe DNG Converter for Windows
Read How to Download Adobe DNG Converter for Mac OS
Option 2: Upgrade to Photoshop CS5
New CS5 Capabilities, Full Integration, More Convnenience.
You can upgrade your Photoshop to the latest version, in which Camera Raw knows about the raw files your new camera produces and can open them directly. This gives you maximum integration with Bridge as well. And you get the new 2010 process for converting Raw files and new Photoshop CS5 features.
Read More About Photoshop Upgrade Information
-Noel -
I don't know how to update the camera raw to a higher version as the link doen't work.
Which verison of camera raw do you have installed? I would update to the latest camera raw plug in. Here is a link to 6.7
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5372 -
Nikon D7000 LR4 Camera Raw color issues
I just upgraded my camera from a Nikon D70 to a D7000.
Problem: When I process the RAW /NEF files with Adobe Lightroom 4 the color is terrible. By that I mean, the images look dull, dark and have no pop. The coloring is not even close to what is displayed on the Nikon camera screen.
When I use Nikon View NX: The software which is pakaged with the camera produces an image which is, or almost identical to the image on the camera after the photo is taken.
I like the funcionality of lightroom better than ViewNX, so what I have been doing is processing with ViewNX and then exporting to a TIFF. Opening up LR4 and then importing and cataloging. This process is a pain and time consuming.
I also have found LR3 does a better job than LR4 at processing the images.
Is there a way I can tweak or download corrected ACR settings to match my Nikon D7000.I have figured out myself the profile correction problem for my Nikon D7000 NEF Problem. It almost match to the one in NX2 or even on camera LCD. the following is what I have adjusted in my LR4
Brightness +1.00
Contrasts +28~33
Shadow +40~55
Black -25
Don't Forget change the Profile setting on Camera Calibration under the Develop mode to match the what you set on your camera. I always shot on Standard mode, therefore I set the Profile to Camera Standard.
The following is the way I figure it out.
1. I imported the photo under "Zeroed" at Import page under Develop setting > Lightroom Genaral Present > Zeroed
2. Open one of the imported picture on Develop mode
3. Scroll down to Camera Calibration change the profile setting to match they one you set on your camera, in this case I choose Camera standard.
4. Under the Camera Calibration>Process you will see 2012(Present), changed it to 2010, and change it back to 2012 (present again)
5. You will notice that the develop setting automaticly change to the following (Brightness -1.00, contrasts -33 and black +25) Let say this is what lightroom did to your picture( from Nikon D7000 NEF)
6. and then Change everything back to " 0 " will you find your picture nearly close to the one you saw on NX2.0 or Nikon LCD
If your found the step above is hard to follow, please just change the Brightness +1.00, Contrasts +33 and Black -25, and dont forget adjust a bit of shadow as well.
for the people who dont know what Nikon done to Nikon D7000, please dont be expert to say "you dont know RAW". please read more reviews first before helping people who are new to RAW or even stuck on RAW. This forum is helping people with our knowledge, is not to make people need help to get more confuse.
For Nikon D7000 user.... Remember turn D-Lightning off.... this is one of the problem will cause LR4 change your tone to more darker, especially on portrait photoshot. Hopefully Adobe will realease the new update soon to match the new system inside Nikon camera.
Please note that the step above only Apply for Nikon D7000 and Lightroom 4 only. And it is not 100% correct to what you seen on your camera, at least is 80~90% Match!! -
Nikon Coolpix P340 Camera RAW plug in for Adobe Bridge?
Just got a P340 specifically for the ability to capture RAW images and realized that the camera isn't supported yet. Anyone know when the plug in for the P340 will be available?
Thanks for trying to help, Curt Y. I did download the beta ACR 8.4.0.182 and have CC. I checked that it was installed. I redownloaded the images from the camera. After I did that, the NEF files in RAW showed up in Bridge but no thumbnails. When I tried to open them I got the same error message that these can't be opened. I researched the beta ACR 8.4 newly suported cameras and the Coolpix P340 was not listed.
I tried taking the memmory card out of the P340 and put it into my Nikon D7000 to see if I could download the files in RAW as the D7000 is supported, but for some reason the files did not even appear on the D7000. I guess P340 files won't be able to be viewed or otherwise utilized in a D7000 camera.
Unless you have any other suggestions, I guess I need to wait until Adobe adds the P340 to the list of supported cameras.
Best/Saul -
Nikon D5200 and Camera RAW help
Elements 11 with updated Raw still doesn't read my the files from a new Nikon camera.
Yes. Thanks.
This is an issue with the Nikon transfer program.
The issue was fixed when using the Elements downloaded. -
How can I see NEF files of Nikon D800? Camera Raw 7.4.0 installed
I have installed latest version of Adobe Creative Suite 6, education edition, Also I have installed Nikon capture 2. In Capture a can see the NEF files of my Nikon D800 but I can´t in Bridge or Photoshop. How can I solve this?
Ask in the PS/ ACR forums and provide more details.
Mylenium -
I just recently downloaded and installed photoshop cs6 and the highest camera raw update i have is camera raw 7 and my camera (NIKON D610) requires camera raw 8.3 i've updated the camera raw plugin to the highest thats available in the software update but i read that camera raw 8.3 is now available but i can't seem to locate it on the internet or adobe website to upgrade my camera raw plugin to 8.3. can someone please help me and show me where i can find a download link for camera raw 8.3 thank you for taking the time to read this and your help will be greatly appreciated.
Why not update CS6 to use ACR 8.6? If CS 6 menu Help>Updates does not update ACR to 8.6 try downloading the update manually and inst stall it.
Adobe - Photoshop : For Macintosh
Adobe - Photoshop Elements : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
All the Adobe CC Updates: The Direct Download Links for Windows | ProDesignTools
All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools -
Nikon Capture NX or Camera Raw
Using Nikon Capture NX, Camera Raw best for photos?
Indeed different profiles have different ways of handling things, especially at the extremes - especially when one or more channels is clipped.
In addition to comparing profile behavior, consider the point curve in ACR - @Lr4 we can now reshape the curves on a channel by channel basis, and that way fix many of these types of problems - admittedly such changes may need to be done uniquely for each photo.
And of course if (Adobe Standard) profile needs a tweak for handling such end cases, Adobe may be open to that... - if not for older cameras (in which case such a tweak might change the appearance of already-edited photos), at least for newer ones.
R -
CS 5 and Camera Raw and Nikon D3200
I have a Nikon D3200 and CS5. I downloaded Camera Raw for CS5 but I get the message that my camera D3200 is not supported bij this version of CameraRaw. Which version do I need for CS5 and Nikon D3200?
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium -
Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
D7100 first supported in ACR 7.4
You probably just need to update Camera Raw in CS6 via Help > Updates.
Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw. -
Camera raw does not support my new Nikon D7200? When is it updated?
II have bougth a Nikon D7200 and Camera Raw does not support it. How to solve this problem, or is a new update coming?
It seems quite likely that after the next update Camera Raw will be able to process that format but do not expect an announcement for a release date.
If you don’t want to use Nikon’s proprietary software and prefer ACR please petition the camera maker to allow shooting DNG.
Maybe you are looking for
-
Hi , I want to add the conext information to my server.xml of tomcat for my hibernate configuration..... the conext information is as follows .... <Context path="/quickstart" docBase="quickstart"> <Resource name="jdbc/quickstart" scope="Shareable" ty
-
Internal table in smartforms without use predifined structure
Hi !!! I have a doubt is possible to use an internal table that was defined in a program but not in a structure in the data dictionary ?? How i need define this in smartform ?? I'm doing the following: In the global definitions in the tab t
-
Error 2 during TM backup -- drive can't be repaired. What next?
*Time Machine log:* Starting standard backup Backing up to: /Volumes/TM v.3-Leopard/Backups.backupdb Error: (-50) Creating directory 2010-12-27-180631.inProgress Failed to make snapshot container. Backup failed with error: 2 *Attempted repair with Di
-
I have repeated devices in iPhoto; it seems that every time I plug my phone or iPad to my computer it makes a entry in devices (if iPhoto is on or not), how do I stop this? Here is a current grab from my iPhoto screen. If I click on one of the old en
-
My blackberry keeps sending and receiving data
and it is draining my battery!!!! My phone is just sitting beside me, not receiving any emails or texts and it isn't loading an internet page, so I don't know what it is doing. My battery is dying before 11:00 AM which shouldn't happen.